TCN Series Tantalum Solid Electrolytic Chip Capacitors Undertab Series with Conductive Polymer Electrode FEATURES * Conductive polymer electrode reduces ignition failure mode * Lower ESR * Undertab terminations layout: - High Volumetric Efficiency - High PCB assembly density - High capacitance in smaller dimensions * 3x reflow 260C compatible * 3 case sizes available LEAD-FREE COMPATIBLE COMPONENT APPLICATIONS * Consumer applications (e.g. mobiles, MP3 etc.) CASE DIMENSIONS: millimeters (inches) MARKING L, S, T CASE AVX LOGO Polymer Polarity Band (Anode+) Capacitance Value in pF 156 = 15F 156 J Code EIA Code EIA Metric W+0.20 (0.008) -0.10 (0.004) H max. W10.20 (0.008) A+0.30 (0.012) -0.20 (0.008) L 1210 3528-10 3.50 (0.138) 2.80 (0.110) 1.00 (0.039) 2.20 (0.087) 0.80 (0.031) S 1206 3216-12 3.20 (0.126) 1.60 (0.063) 1.20 (0.047) 1.20 (0.047) 0.80 (0.031) T 1210 3528-12 3.50 (0.138) 2.80 (0.110) 1.20 (0.047) 2.20 (0.087) 0.80 (0.031) W1 dimension applies to the termination width for A dimensional area only. Rated Voltage J = 6.3V XXXXX L0.20 (0.008) ID Code N CASE Capacitance Value in pF 106 = 10F Polarity Band (Anode+) 106 J Rated Voltage Code J = 6.3V AVX LOGO Polymer HOW TO ORDER TCN L Type Case Size See table above 157 M Capacitance Code pF code: 1st two digits represent significant figures, 3rd digit represents multiplier (number of zeros to follow) Tolerance M = 20% 006 R Rated DC Voltage Packaging 006 = 6.3Vdc R = Pure Tin 7" Reel 016 = 16Vdc S = Pure Tin 13" Reel 025 = 25Vdc 035 = 35Vdc TECHNICAL SPECIFICATIONS Technical Data: Capacitance Range: Capacitance Tolerance: Leakage Current DCL: Rated Voltage (VR) Category Voltage (VC) Surge Voltage (VS) Surge Voltage (VS) Temperature Range: Reliability: 116 MARCH 2015 +85C: +105C: +85C: +105C: All technical data relate to an ambient temperature of +25C 1.0 F to 1000 F 20% 0.1CV 4 6.3 10 16 25 35 3.2 5 8 13 20 28 5.2 8 13 21 33 46 4 6 10 16 25 35 -55C to +105C 1% per 1000 hours at 85C, VR with 0.1/V series impedance 60% confidence level 0200 ESR in m TCN Series Tantalum Solid Electrolytic Chip Capacitors Undertab Series with Conductive Polymer Electrode CAPACITANCE AND RATED VOLTAGE RANGE (LETTER DENOTES CASE SIZE) Capacitance Rated Voltage DC to 85C / 0.66DC to 105C F 1.0 4.7 10 Code 105 475 106 4V (G) 6.3V (J) 10V (A) 15 22 33 156 226 336 N(500)* 47 476 N(500)* K(500)*/N(500)* K(500)*/M(200)* N(500)* 68 686 K(500)*/N(500)* K(500)*/S(500)* 100 107 K(500)*/S(500)* 150 157 220 227 330 470 1000 337 477 108 G(200)*/L(200)* S(500)* G(200)*/L(150)* S(200)*/T(150)* H(150)*/T(150)* H(150)* G(200)*/K(250) L(200)/S(250) K(200)*/L(200) S(200)*/T(200) H(100,200)* T(200)* H(200)* X(50) X(200) 16V (C) 25V (E) 35V (V) O* T(200) T(200) N(500)* N(500)* K(500)*/N(500)* L(200)/T(200) K(500)*/S(500)* T(200) G(150)*/L(150)* S(500)* G(150)*/L(150)* S(150)*/T(150)* G(150)*/H(150)* T(150)* T(200)*/X* X(100)* X(100) X(100)* X(70) H(150)* Available Ratings, (ESR ratings in mOhms in brackets) Engineering samples - please contact manufacturer *Codes under development - subject to change Note: Voltage ratings are minimum values. AVX reserves the right to supply higher ratings in the same case size, to the same reliability standards. RATINGS & PART NUMBER REFERENCE AVX Part No. Case Size Cap (F) Rated Voltage (V) Rated Temp. (C) Category Category Voltage Temp. (V) (C) TCNN476M006#0500 TCNK107M006#0250 TCNL107M006#0200 TCNS107M006#0250 TCNL157M006#0200 TCNS157M006#0200 TCNT157M006#0200 TCNT227M006#0200 TCNX477M006#0050 TCNX108M006#0200 N K L S L S T T X X 47 100 100 100 150 150 150 220 470 1000 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 85 85 85 85 85 85 85 85 85 85 5 6.3 5 6.3 5 5 5 5 6.3 6.3 TCNL336M016#0200 TCNT336M016#0200 TCNT476M016#0200 TCNX157M016#0070 L T T X 33 33 47 150 16 16 16 16 85 85 85 85 16 16 16 16 TCNX476M025#0100 X 47 25 105 25 TCNT475M035#0200 TCNT106M035#0200 T T 4.7 10 35 35 85 85 35 35 DCL (A) Max. 6.3 Volt @ 85C 105 28.2 85 60 105 60 85 60 105 90 105 90 105 90 105 132 85 282 85 600 16 Volt @ 85C 85 52.8 85 52.8 85 75.2 85 240 25 Volt @ 85C 105 117.5 35 Volt @ 85C 85 16.5 85 35 DF % Max. ESR Max. (m) @ 100kHz MSL 100kHz RMS Current (mA) 10 10 10 10 10 10 10 10 6 30 500 250 200 250 200 200 200 200 50 200 6 6 6 6 25C 85C 105C Product Category 3 3 3 3 3 3 3 3 3 3 400 600 700 600 700 700 700 700 1900 900 300 400 500 400 500 500 500 500 1300 600 200 - 300 - 300 300 300 300 - - 105C 85C 105C 85C 105C 105C 105C 105C 85C 85C 200 200 200 70 3 3 3 3 700 700 700 1600 500 500 500 1100 - - - - 85C 85C 85C 85C 6 100 3 1300 900 600 105C 10 10 200 200 3 3 700 700 500 500 - - 85C 85C Moisture Sensitivity Level (MSL) is defined according to J-STD-020. All technical data relates to an ambient temperature of +25C. Capacitance and DF are measured at 120Hz, 0.5RMS with DC bias of 2.2 volts. DCL is measured at rated voltage after 5 minutes. ESR allowed to move up to 1.25 times catalog limit post mounting. For typical weight and composition see page 214. NOTE: AVX reserves the right to supply a higher voltage rating or tighter tolerance part in the same case size, to the same reliability standards. MARCH 2015 117 TCN Series Tantalum Solid Electrolytic Chip Capacitors Undertab Series with Conductive Polymer Electrode PRODUCT CATEGORY 105C TEST Endurance Storage Life Humidity Temperature Stability Surge Voltage 105C series (Temperature range -55C to +105C) Characteristics Visual examination no visible damage Determine after application of rated voltage for 2000 +48/-0 hours at 852C and then leaving 1-2 hours at DCL 1.25 x initial limit room temperature. Also determine after application of C/C within +20/-30% of initial value 105C temperature, category voltage for 2000 +48/-0 DF 1.5 x initial limit hours and then leaving 1-2 hours at room temperature. Power supply impedance to be 0.1/V. ESR 2 x initial limit Visual examination no visible damage DCL (VR 75V) 1.25 x initial limit DCL (VR > 75V) 2 x initial limit 105C, 0V, 2000h C/C within 20% of initial value DF 1.5 x initial limit ESR 2 x initial limit Visual examination no visible damage Determine after storage without applied voltage DCL 3 x initial limit at 652C and 952% relative humidity for 500 C/C within +30/-20% of initial value hours and then recovery 1-2 hours at room temperature. DF 1.5 x initial limit ESR 2 x initial limit Condition Step 1 2 3 4 5 6 TemperatureC +202 -55+0/-3 +202 +85+3/-0 +105+3/-0 +202 Duration(min) 15 15 15 15 15 15 Test temperature: 105C+3/0C Test voltage: Category voltage at 105C Surge voltage: 1.3 x category voltage at 105C Series protection resistance 1000100 Discharge resistance: 1000 Number of cycles: 1000x Cycle duration: 6 min; 30 sec charge, 5 min 30 sec discharge DCL C/C DF +20C -55C IL* n/a n/a +0/-20% IL* 1.5 x IL* +20C +85C +105C +20C IL* 10 x IL* 12.5 x IL* IL* 5% +20/-0% +30/-0% 5% IL* 1.5 x IL* 2 x IL* IL* Visual examination no visible damage DCL initial limit C/C within +20/-30% of initial value DF 1.25 x initial limit *Initial Limit PRODUCT CATEGORY 85C TEST Endurance Storage Life Humidity Temperature Stability Surge Voltage 85C series (Temperature range -55C to +85C) Characteristics Visual examination no visible damage Determine after application of rated voltage for 2000 DCL 1.25 x initial limit +48/-0 hours at 852C and then leaving 1-2 hours C/C within +20/-30% of initial value at room temperature. Power supply impedance to be DF 1.5 x initial limit 0.1/V. ESR 2 x initial limit Visual examination no visible damage DCL 1.25 x initial limit 85C, 0V, 2000h C/C within 20% of initial value DF 1.5 x initial limit ESR 2 x initial limit Visual examination no visible damage Determine after storage without applied DCL 5 x initial limit voltage at 652C and 952% relative C/C within +40/-20% of initial value humidity for 500 hours and then recovery DF 1.5 x initial limit 1-2 hours at room temperature. ESR 2 x initial limit Step TemperatureC Duration(min) +20C -55C +20C +85C +20C 1 +202 15 DCL IL* n/a IL* 10 x IL* IL* 2 -55+0/-3 15 3 +202 15 C/C n/a +0/-20% 5% +20/-0% 5% 4 +85+3/-0 15 DF IL* 1.5 x IL* IL* 1.5 x IL* IL* 5 +202 15 Condition Test temperature: 85+3/0C Test voltage: Rated voltage Surge voltage: 1.3 x rated voltage Series protection resistance 1000100. Discharge resistance: 1000 Number of cycles: 1000x Cycle duration: 6 min; 30 sec charge, 5 min 30 sec discharge *Initial Limit 118 MARCH 2015 Visual examination no visible damage DCL initial limit C/C within +20/-30% of initial value DF 1.25 x initial limit Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: AVX: TCNS107M006R0250 TCNK107M006R0250