61-8640.37 - EAO - Datasheet.Live

EAO – Your Expert Partner for

Human Machine Interfaces

EAO Product Information

Series 61

Switches and Indicators

Contents

01.2009

Description......................................................................................................3

Product Assembly ..........................................................................................4

Mounting instruction......................................................................................9

Devices raised mounting .............................................................................11

Devices flush mounting ...............................................................................19

Accessories...................................................................................................25

Technical Data...............................................................................................43

Typical Applications.....................................................................................47

Application guidelines..................................................................................49

Marking..........................................................................................................50

Drawings........................................................................................................53

Index...............................................................................................................70

01.2009

Description

General notes

The indicators, illuminated pushbuttons, selector-, keylock switches or

emergency-stop switches with spray-water protection at the front

(IP 65) are modular and consist of an actuator and switching element.

In addition to the standard switching elements (gold-plated silver

contact or silver contact with universal soldering terminals), forced-

opening, slow-make switching elements with gold or silver contacts with

soldering terminals are available. EAO can also offer screw terminals

on its slow make elements. Switching elements with soldering terminals

can also be fitted with flat receptacle 2.8 x 0.5 mm.

The front dimensions of the units in this series are 24 x 24 mm, 24 mm

dia., 18 x 24 mm, 18 x 18 mm or 18 mm dia. For flush mounting the

dimensions 25 mm dia., 24 x 30 mm or 24 x 24 mm can be supplied.

Mounting

All switch actuators are mounted from the front by pushing them through

the mounting hole in the front panel. They are then fixed from the back

with a fixing nut and the mounting tool Typ-Nr. 01-907. Max. tightening

torque 50 Ncm.

The preassembled switching element with the connecting wires in a

single plane can be clipped on afterwards. A range of assembly and

service tools are available.

PCB mounting adaptors are available for universal solder terminal

switching elements.

All raised profile actuators are provided with an anti-twist device.

Lenses

The flat or concave lenses are available in various colours and a

transparent or translucent version. The lens surface is non-reflecting

(mat). Round lenses for devices 24 mm dia. or 25 mm dia. can also be

supplied in aluminium.

Anodized aluminium parts can have visible variations due production-

technical reasons.

Marking

For further information about engraving, hot stamping and film inserts

see part Marking.

Illumination

T1 3/4 midget groove LED's in red, blue, green, yellow and white or

filament lamps give superb illumination and can be supplied in 6, 12, 24,

or 48 V.

Luminosity and wave length scattering caused by the technology used

in the LED manufacturing processes may lead to visual differences in

our products.

Position indication

The status of a maintained action switch can be determinded by the

position of the lens.

Keylock switch

Standard lock (Index D). Standard lock number is 311. If the lock

number is not specified, we will supply standard number 311.

An additional 134 special locks (Index X) are available on request.

Master keys for lock numbers 311 ... 445 may be ordered by quoting

Typ-Nr. 31-989.300. Two keys are supplied with each keylock switch.

Spare keys (Index D) for standard locks may be ordered by quot ing

Typ-Nr. 31-989.xxx (please state the lock number).

Emergency-stop pushbutton, foolproof with key to release

KABA safety lock. Standard lock number is 1001. Other lock numbers

are available on request. Spare keys for KABA safety lock may be

ordered under Typ-Nr. 14-987.xxx (please state the lock number).

Specimen order

We reserve the right to modify technical data

All dimensions in mm

Product Information Indicator :

- Indicator complete, flush mounting, 24 x 24 mm 61-0000.02

Essential accessories :

- Lens plastic colourless transparent flush,

24 x 24 mm 61-9671.7

- Single-LED T1 3/4 MG, 24 VAC/DC, white

diffuse 10-2J12.1069

- Front bezel set for Indicator, flush mounting,

plastic black, 24 x 24 mm 61-9930.0

Product Assembly

01.2009

Pushbutton illuminative, raised mounting

01 Lens

2LED

3 Actuator housing

4 Sealing

5 Front plate

6 Fixing nut

7 Switching element

Emergency-stop pushbutton

01 Emergency-stop pushbutton actuator

2 Sealing

3 Front plate

4 Fixing nut

5 Switching element

Product Assembly

01.2009

Mushroom-head pushbutton, raised mounting

01 Mushroom-head cap

2 Front ring

3 Actuator housing

4 Sealing

5 Front plate

6 Fixing nut

7 Switching element

Keylock switch, raised mounting

01Key

2 Keylock front bezel

3 Keylock switch actuator

4 Sealing

5 Front plate

6 Fixing nut

7 Switching element

Product Assembly

01.2009

Selector switch illuminative, raised mounting

01 Lever

2LED

3 Selector switch actuator

4 Sealing

5 Front plate

6 Fixing nut

7 Switching element

Pushbutton illuminative, flush mounting

01 Lens

2LED

3 Actuator housing

4 Sealing

5 Front bezel

6 Sealing

7 Front panel

8 Fixing bracket

9 Fixing nut

10 Switching element

Product Assembly

01.2009

Keylock switch, flush mounting

01Key

2 Keylock front bezel

3 Keylock switch actuator

4 Sealing

5 Front bezel

6 Sealing

7 Front plate

8 Fixing bracket

9 Fixing nut

10 Switching element

Product Assembly

01.2009

Selector switch illuminative, flush mounting

01 Lever

2LED

3 Selector switch actuator

4 Sealing

5 Front bezel

6 Sealing

7 Front plate

8 Anti-twist ring

9 Thrust piece

10 Fixing nut

11 Switching element

Mounting instruction

01.2009

Lens remover, Mounting tool, Dismantling tool with Lamp- and LED remover are part of the Tool set K61-999.100

Tool set

Lens remover

61-9730.0

Mounting tool

01-907

Dismantling tool

61-9711.0

Lens remover

02-905

1 Snap-action switching element with soldering terminal

2 Slow-make switching element with soldering terminal

3 Slow-make switching element with screw terminal

Mounting tool

01-907

Dismantling tool

61-9711.0

raised mounting flush mounting

Mounting instruction

01.2009

Conversion is not reversible !

Conversion from momentary to maintained action

1 Momentary action 2 Maintained action

push carefully the metallic part with a screwdriver till the end of its travel.

Devices raised mounting

01.2009

Essential Accessories:

d Front ring, raised mounting page 31

d Lens plastic, raised mounting page 25

d Single-LED page 39

Continuation see next page

Front ring required only for actuator Ø 24 mm

Terminals: S1 = Soldering terminal (also pluggable 2.8 x 0.5 mm)

Mounting dimensions from page 58, Technical drawing from page 59, Circuit drawing from page 66

Essential Accessories:

d Front ring, raised mounting page 31

d Lamp element page 33

d Lens plastic, raised mounting page 25

d Single-LED page 39

Continuation see next page

Front ring required only for actuator Ø 24 mm

Mounting dimensions from page 58, Technical drawing from page 59, Circuit drawing from page 66

Indicator complete

Front protection

Terminals

b 24 x 24 mm

Typ-Nr.

b 18 x 18 mm

Typ-Nr.

a 18 x 24 mm

Typ-Nr. Ø 24 mm

Typ-Nr. Ø 18 mm

Typ-Nr.

Mounting dimensions

Technical drawing

Circuit drawing

Indicator complete

Actuator housing black IP 65 S1 61-0050.02 61-0020.02 61-0030.02 61-0040.02 61-0010.02 3340.005

Indicator actuator

Front protection

b 24 x 24 mm

Typ-Nr.

b 18 x 18 mm

Typ-Nr.

a 18 x 24 mm

Typ-Nr. Ø 24 mm

Typ-Nr. Ø 18 mm

Typ-Nr.

Mounting dimensions

Technical drawing

Circuit drawing

Indicator actuator

Actuator housing black IP 65 61-0059.0 61-0029.0 61-0039.0 61-0049.0 61-0019.0 3 14 4 0.005

Devices raised mounting

01.2009

Essential Accessories:

d Front ring, raised mounting page 31

d Lens plastic, raised mounting page 25

d Single-LED page 39

d Switching element for Pushbutton | Keylock- and Selector switch 2 positions page 35

Continuation see next page

Front ring required only for actuator Ø 24 mm

M-MA convertible from Momentary to Maintained action

Switching action: MA = Maintained action, M = Momentary action, M-MA = Momentary action-Maintained action

Mounting dimensions from page 58, Technical drawing from page 59, Circuit drawing from page 66

Illuminated pushbutton actuator

Front protection

Switching action

b 24 x 24 mm

Typ-Nr.

b 18 x 18 mm

Typ-Nr.

a 18 x 24 mm

Typ-Nr. Ø 24 mm

Typ-Nr. Ø 18 mm

Typ-Nr.

Mounting dimensions

Technical drawing

Circuit drawing

Illuminated pushbutton ac-

tuator

Actuator housing black

IP 65 MA 61-1250.0 61-1220.0 61-1230.0 61-1240.0 61-1210.0 3 16 6 0.005

M61-1150.0 61-1120.0 61-1130.0 61-1140.0 61-1110.0 3 16 13 0.005

M-MA 61-1350.0 61-1320.0 61-1330.0 61-1310.0 3 16 13 0.005

Devices raised mounting

01.2009

Application as per DIN EN ISO 13850 and EN 60204-1

Essential Accessories:

d Switching element for Emergency-stop pushbutton, foolproof EN IEC 60947-5-5 page 36

Continuation see next page

Other lock numbers on request

Switching action: MA = Maintained action

Mounting dimensions from page 58, Technical drawing from page 59, Circuit drawing from page 66

Emergency-stop pushbutton actuator, foolproof EN IEC 60947-5-5

Front protection

Switching action

Mushroom had cap Marking Ø 27 mm

Typ-Nr.

Mounting dimensions

Technical drawing

Circuit drawing

Emergency-stop pushbutton actuator, foolproof

EN IEC 60947-5-5

Position indication ring black

Key to unlock clockwise

Standard lock 1001

IP 65 MA Plastic red Stop 61-5441.4/K 1 19 5 0.033

Position indication ring black

Twist to unlock clockwise IP 65 MA Plastic red Arrows 61-3440.4/1 1 19 5 0.020

Stop + Arrows 61-3440.4/2 1 19 5 0.020

Position indication ring black

Twist to unlock clockwise

with adaptor for mosaic

IP 65 MA Plastic red Arrows 61-3440.4/1S 1 19 5 0.021

Position indication ring black

Twist to unlock clockwise

with metal Fixing nut

IP 65 MA Plastic red Arrows 61-3440.4/D 1 19 5 0.020

Position indication ring green

Twist to unlock clockwise IP 65 MA Plastic red Arrows 61-3440.4/5 1 19 5 0.020

Devices raised mounting

01.2009

Essential Accessories:

d Switching element for Emergency-stop pushbutton, foolproof EN IEC 60947-5-5 page 36

d Switching element for Stop pushbutton, foolproof page 37

Continuation see next page

Other lock numbers on request

Switching action: MA = Maintained action

Mounting dimensions from page 58, Technical drawing from page 59, Circuit drawing from page 66

Essential Accessories:

d Front ring, raised mounting page 31

d Mushroom-head cap page 28

d Switching element for Pushbutton | Keylock- and Selector switch 2 positions page 35

Continuation see next page

Switching action: MA = Maintained action, M = Momentary action

Mounting dimensions from page 58, Technical drawing from page 59, Circuit drawing from page 66

Stop pushbutton actuator, foolproof

Front protection

Switching action

Mushroom had cap Marking Ø 27 mm

Typ-Nr.

Mounting dimensions

Technical drawing

Circuit drawing

Stop pushbutton actuator, foolproof

Position indication ring black

Key to unlock clockwise

Standard lock 1001

IP 65 MA Plastic black without 61-5441.0/KA 1 19 5 0.033

Position indication ring black

Twist to unlock clockwise IP 65 MA Plastic grey Arrows 61-3440.4/8 1 19 5 0.020

Mushroom-head pushbutton actuator

Front protection

Switching action

Ø 32 mm

Typ-Nr.

Mounting dimensions

Technical drawing

Circuit drawing

Mushroom-head pushbutton actuator

Actuator housing black IP 65 MA 61-1240.0 1 15 2 0.005

M61-1140.0 1 15 3 0.005

Devices raised mounting

01.2009

if mounted with anti-twist device, the lug is on the left side

Actuators usable for front dimensions: b 24 x 24 mm | b 18 x 18 mm | a 18 x 24 mm | 24 mm dia. | 18 mm dia.

Essential Accessories:

d Anti-twist ring page 41

d Keylock front bezel, raised mounting page 28

d Switching element for Pushbutton | Keylock- and Selector switch 2 positions page 35

Continuation see next page

Other lock numbers on request

Anti-twist ring (not needed by using anti-twist device)

Switching action: MA = Maintained action, M = Momentary action

Mounting dimensions from page 58, Technical drawing from page 59, Circuit drawing from page 66

Keylock switch actua tor 2 positions

Front protection

Switching action

Key remove

Typ-Nr.

Mounting dimensions

Technical drawing

Circuit drawing

Keylock switch actuator 2 positions

Position A: Basic position

Position C: Maintained action

Standard lock 311

IP 65 MA A 61-2201.0/D 317170.065

C61-2203.0/D 317170.065

C + A 61-2205.0/D 317170.065

Position A: Basic position

Position C: Momentary action

Standard lock 311

IP 65 M A 61-2101.0/D 317160.065

Devices raised mounting

01.2009

if mounted with anti-twist device, the lug is on the left side

Actuators usable for front dimensions: b 24 x 24 mm | b 18 x 18 mm | a 18 x 24 mm | 24 mm dia. | 18 mm dia.

Essential Accessories:

d Anti-twist ring page 41

d Keylock front bezel, raised mounting page 28

d Switching element for Keylock- and Selector switch 3 positions page 36

Continuation see next page

Anti-twist ring (not needed by using anti-twist device)

Other lock numbers on request

Switching action: MA = Maintained action, M = Momentary action

Mounting dimensions from page 58, Technical drawing from page 59, Circuit drawing from page 66

Keylock switch actuator 3 positions

Front protection

Switching action

Key remove

Typ-Nr.

Mounting dimensions

Technical drawing

Circuit drawing

Keylock switch actuator 3 positions

Pos. C: Maintained action

Pos. A: Basic posi tion

Pos. B: Maintained action

Standard lock 311

IP 65 MA-0-MA A 61-2601.0/D 3 17 19 0.065

A + B 61-2604.0/D 3 17 19 0.065

B61-2602.0/D 3 17 19 0.065

C61-2603.0/D 3 17 19 0.065

C + A 61-2605.0/D 3 17 19 0.065

C + A + B 61-2607.0/D 3 17 19 0.065

C + B 61-2606.0/D 3 17 19 0.065

Pos. C: Maintained action

Pos. A: Basic posi tion

Pos. B: Momentary action

Standard lock 311

IP 65 MA-0-M A 61-2701.0/D 3 17 18 0.065

C61-2703.0/D 3 17 18 0.065

C + A 61-2705.0/D 3 17 18 0.065

Pos. C: Momentary action

Pos. A: Basic posi tion

Pos. B: Maintained action

Standard lock 311

IP 65 M-0-MA A + B 61-2804.0/D 3 17 15 0.065

B61-2802.0/D 3 17 15 0.065

Pos. C: Momentary action

Pos. A: Basic posi tion

Pos. B: Maintained action

Standard lock 311

IP 65 M-0-MA A 61-2801.0/D 3 17 15 0.065

Pos. C: Momentary action

Pos. A: Basic posi tion

Pos. B: Momentary action

Standard lock 311

IP 65 M-0-M A 61-2501.0/D 3 17 14 0.065

Devices raised mounting

01.2009

illuminative

if mounted with anti-twist device, the lug is on the left side

Actuators usable for front dimensions: b 26 x 26 mm | b 24 x 24 mm | 18 mm dia.

Essential Accessories:

d Anti-twist ring page 41

d Lever, raised mounting page 29

d Single-LED page 39

d Switching element for Pushbutton | Keylock- and Selector switch 2 positions page 35

Continuation see next page

Anti-twist ring (not needed by using anti-twist device)

Switching action: MA = Maintained action, M = Momentary action

Mounting dimensions from page 58, Technical drawing from page 59, Circuit drawing from page 66

Selector switch actuator 2 positions

Front protection

Switching action

Typ-Nr.

Mounting dimensions

Technical drawing

Circuit drawing

Selector switch actuator 2 positions

Position C: Maintained action

Position A: Basic position

IP 65 MA 61-4210.0 3 18 8 0.006

Position C: Momentary action

Position A: Basic position IP 65 M 61-4110.0 3 18 7 0.006

Devices raised mounting

01.2009

illuminative

if mounted with anti-twist device, the lug is on the left side

Actuators usable for front dimensions: b 26 x 26 mm | b 24 x 24 mm | 18 mm dia.

Essential Accessories:

d Anti-twist ring page 41

d Lever, raised mounting page 29

d Single-LED page 39

d Switching element for Keylock- and Selector switch 3 positions page 36

Continuation see next page

Switching action: MA = Maintained action, M = Momentary action

Mounting dimensions from page 58, Technical drawing from page 59, Circuit drawing from page 66

Selector swit ch actuator 3 positions

Front protection

Switching action

Typ-Nr.

Mounting dimensions

Technical drawing

Circuit drawing

Selector switch actuator 3 positions

Position C: Maintained action

Position A: Basic position

Position B: Maintained action

IP 65 MA-0-MA 61-4610.0 3 18 12 0.006

Position C: Maintained action

Position A: Basic position

Position B: Momentary action

IP 65 MA-0-M 61-4710.0 3 18 11 0.006

Position C: Momentary action

Position A: Basic position

Position B: Maintained action

IP 65 M-0-MA 61-4810.0 3 18 10 0.006

Position C: Momentary action

Position A: Basic position

Position B: Momentary action

IP 65 M-0-M 61-4510.0 3 18 9 0.006

Devices flush mounting

01.2009

Actuators usable for front dimensions: b 24 x 24 mm | a 24 x 30 mm | 25 mm dia.

Essential Accessories:

d Front bezel set for Indicators and Illuminated pushbutton, flush mounting page 30

d Lens plastic, flush mounting page 25

d Single-LED page 39

Continuation see next page

Terminals: S1 = Soldering terminal (also pluggable 2.8 x 0.5 mm)

Mounting dimensions from page 58, Technical drawing from page 59, Circuit drawing from page 66

Actuators usable for front dimensions: b 24 x 24 mm | a 24 x 30 mm | 25 mm dia.

Essential Accessories:

d Front bezel set for Indicators and Illuminated pushbutton, flush mounting page 30

d Lamp element page 33

d Lens plastic, flush mounting page 25

d Single-LED page 39

Continuation see next page

Mounting dimensions from page 58, Technical drawing from page 59, Circuit drawing from page 66

Indicator complete, flush mounting

Front protection

Terminals

Typ-Nr.

Mounting dimensions

Technical drawing

Circuit drawing

Indicator complete, flush mounting IP 65 S1 61-0000.02 4440.006

Indicator actuator, flush mounting

Front protection

Typ-Nr.

Mounting dimensions

Technical drawing

Circuit drawing

Indicator actuator, flush mounting IP 65 61-0009.0 4 21 4 0.005

Devices flush mounting

01.2009

Actuators usable for front dimensions: b 24 x 24 mm | a 24 x 30 mm | 25 mm dia.

Essential Accessories:

d Front bezel set for Indicators and Illuminated pushbutton, flush mounting page 30

d Lens plastic, flush mounting page 25

d Single-LED page 39

d Switching element for Pushbutton | Keylock- and Selector switch 2 positions page 35

Continuation see next page

M-MA convertible from Momentary to Maintained action

Switching action: MA = Maintained action, M = Momentary action, M-MA = Momentary action-Maintained action

Mounting dimensions from page 58, Technical drawing from page 59, Circuit drawing from page 66

Essential Accessories:

d Front bezel set for Mushroom-head pushbutton, flush mounting page 30

d Mushroom-head cap page 28

d Switching element for Pushbutton | Keylock- and Selector switch 2 positions page 35

Continuation see next page

M-MA convertible from Momentary to Maintained action

Switching action: MA = Maintained action, M = Momentary action, M-MA = Momentary action-Maintained action

Mounting dimensions from page 58, Technical drawing from page 59, Circuit drawing from page 66

Illuminated pushbutton actuator, flush mounting

Front protection

Switching action

Typ-Nr.

Mounting dimensions

Technical drawing

Circuit drawing

Illuminated pushbutton actuator, flush mounting IP 65 MA 61-1200.0 4 20 2 0.005

M61-1100.0 4 20 3 0.005

M-MA 61-1300.0 4 20 3 0.005

Mushroom-head pushbutton actuator, flush mounting

Front protection

Switching action

Ø 32

Typ-Nr.

Mounting dimensions

Technical drawing

Circuit drawing

Mushroom-head pushbutton actuator, flush mounting IP 65 MA 61-1200.0 2 24 2 0.005

M61-1100.0 2 24 3 0.005

M-MA 61-1300.0 2 24 3 0.005

Devices flush mounting

01.2009

Actuators usable for front dimensions: b 24 x 24 mm | a 24 x 30 mm | 25 mm dia.

Essential Accessories:

d Front bezel set for Keylock switch, flush mounting page 31

d Keylock front bezel, flush mounting page 28

d Switching element for Pushbutton | Keylock- and Selector switch 2 positions page 35

Continuation see next page

Other lock numbers on request

Switching action: MA = Maintained action, M = Momentary action

Mounting dimensions from page 58, Technical drawing from page 59, Circuit drawing from page 66

Keylock switch actuator 2 positions, flush moun ting

Front protection

Switching action

Key remove

Typ-Nr.

Mounting dimensions

Technical drawing

Circuit drawing

Keylock switch actuator 2 positions, flush mounting

Position A: Basic position

Position C: Maintained action

Standard lock 311

IP 65 MA A 61-2201.0/D 422170.065

C61-2203.0/D 422170.065

C + A 61-2205.0/D 422170.065

Position A: Basic position

Position C: Momentary action

Standard lock 311

IP 65 M A 61-2101.0/D 422160.065

Devices flush mounting

01.2009

Actuators usable for front dimensions: b 24 x 24 mm | a 24 x 30 mm | 25 mm dia.

Essential Accessories:

d Front bezel set for Keylock switch, flush mounting page 31

d Keylock front bezel, flush mounting page 28

d Switching element for Keylock- and Selector switch 3 positions page 36

Continuation see next page

Other lock numbers on request

Switching action: MA = Maintained action, M = Momentary action

Mounting dimensions from page 58, Technical drawing from page 59, Circuit drawing from page 66

Keylock switch actuator 3 positions, flush mounting

Front protection

Switching action

Key remove

Typ-Nr.

Mounting dimensions

Technical drawing

Circuit drawing

Keylock switch actuator 3 positions, flush mounting

Pos. C: Maintained action

Pos. A: Basic posi tion

Pos. B: Maintained action

Standard lock 311

IP 65 MA-0-MA A 61-2601.0/D 4 22 19 0.065

A + B 61-2604.0/D 4 22 19 0.065

B61-2602.0/D 4 22 19 0.065

C61-2603.0/D 4 22 19 0.065

C + A 61-2605.0/D 4 22 19 0.065

C + A + B 61-2607.0/D 4 22 19 0.065

C + B 61-2606.0/D 4 22 19 0.065

Pos. C: Maintained action

Pos. A: Basic posi tion

Pos. B: Momentary action

Standard lock 311

IP 65 MA-0-M A 61-2701.0/D 4 22 18 0.065

C61-2703.0/D 4 22 18 0.065

C + A 61-2705.0/D 4 22 18 0.065

Pos. C: Momentary action

Pos. A: Basic posi tion

Pos. B: Maintained action

Standard lock 311

IP 65 M-0-MA A + B 61-2804.0/D 4 22 15 0.065

B61-2802.0/D 4 22 15 0.065

Pos. C: Momentary action

Pos. A: Basic posi tion

Pos. B: Maintained action

Standard lock 311

IP 65 M-0-MA A 61-2801.0/D 4 22 15 0.065

Pos. C: Momentary action

Pos. A: Basic posi tion

Pos. B: Momentary action

Standard lock 311

IP 65 M-0-M A 61-2501.0/D 4 22 14 0.065

Devices flush mounting

01.2009

illuminative

Actuators usable for front dimensions: b 24 x 24 mm | 25 mm dia.

Essential Accessories:

d Front bezel set for Selector switch, flush mounting page 31

d Lever, flush mounting page 29

d Single-LED page 39

d Switching element for Pushbutton | Keylock- and Selector switch 2 positions page 35

Continuation see next page

Switching action: MA = Maintained action, M = Momentary action

Mounting dimensions from page 58, Technical drawing from page 59, Circuit drawing from page 66

Selector switch actuator 2 positions, flush mountin g

Front protection

Switching action

Typ-Nr.

Mounting dimensions

Technical drawing

Circuit drawing

Selector switch actuator 2 positions, flush mounting

Position C: Maintained action

Position A: Basic position

IP 65 MA 61-4210.0 4 23 8 0.006

Position C: Momentary action

Position A: Basic position IP 65 M 61-4110.0 4 23 7 0.006

Devices flush mounting

01.2009

illuminative

Actuators usable for front dimensions: b 24 x 24 mm | 25 mm dia.

Essential Accessories:

d Front bezel set for Selector switch, flush mounting page 31

d Lever, flush mounting page 29

d Single-LED page 39

d Switching element for Keylock- and Selector switch 3 positions page 36

Continuation see next page

Switching action: MA = Maintained action, M = Momentary action

Mounting dimensions from page 58, Technical drawing from page 59, Circuit drawing from page 66

Continuation see next page

Cable length 300 mm

Terminals: FR = Flat ribbon cable

Component layout from page 53, Mounting dimensions from page 58, Technical drawing from page 59, Circuit drawing from page 66

Selector switch actuator 3 positions, flush mounting

Front protection

Switching action

Typ-Nr.

Mounting dimensions

Technical drawing

Circuit drawing

Selector switch actuator 3 positions, flush mounting

Position C: Maintained action

Position A: Basic position

Position B: Maintained action

IP 65 MA-0-MA 61-4610.0 4 23 12 0.006

Position C: Maintained action

Position A: Basic position

Position B: Momentary action

IP 65 MA-0-M 61-4710.0 4 23 11 0.006

Position C: Momentary action

Position A: Basic position

Position B: Maintained action

IP 65 M-0-MA 61-4810.0 4 23 10 0.006

Position C: Momentary action

Position A: Basic position

Position B: Momentary action

IP 65 M-0-M 61-4510.0 4 23 9 0.006

Potentiometer, flush mounting

Front protection

Front bezel

Terminals

b 24 x 24 mm

Typ-Nr. Ø 25 mm

Typ-Nr.

Component layout

Mounting dimensions

Technical drawing

Circuit drawing

Potentiometer, flu sh mounting

10 k Ω (linear), 1 W, mechanical travel 300 ° IP 65 Plastic black FR 61-4970.13 40 4 9 1 0.023

61-4970.10 40 4 9 1 0.016

01.2009

Accessories

mat

Continuation see next page

mat

Continuation see next page

Front

Lens plastic, raised mounting

Lens

b 24 x 24 mm

Typ-Nr.

b 18 x 18 mm

Typ-Nr.

a 18 x 24 mm

Typ-Nr. Ø 24 mm

Typ-Nr. Ø 18 mm

Typ-Nr. e

Lens plastic,

raised

mounting

flush,

illuminative

blue transparent 61-9351.6 61-9321.6 61-9331.6 61-9642.6 61-9311.6 0.002

colourless transparent 61-9351.7 61-9321.7 61-9331.7 61-9642.7 61-9311.7 0.002

green transparent 61-9351.5 61-9321.5 61-9331.5 61-9642.5 61-9311.5 0.002

orange transparent 61-9351.3 61-9321.3 61-9331.3 61-9642.3 61-9311.3 0.002

red transparent 61-9351.2 61-9321.2 61-9331.2 61-9642.2 61-9311.2 0.002

smoked transparent 61-9351.1 61-9321.1 61-9331.1 61-9642.1 61-9311.1 0.002

yellow transparent 61-9351.4 61-9321.4 61-9331.4 61-9642.4 61-9311.4 0.002

flush,

non-illuminative black opaque 61-9251.0 61-9221.0 61-9231.0 61-9211.0 0.002

grey opaque 61-9251.8 61-9221.8 61-9231.8 61-9211.8 0.002

white translucent 61-9251.9 61-9221.9 61-9231.9 61-9211.9 0.002

concave,

illuminative blue transparent 61-9326.6 61-9336.6 0.002

colourless transparent 61-9326.7 61-9336.7 0.002

green transparent 61-9326.5 61-9336.5 0.002

orange transparent 61-9326.3 61-9336.3 0.002

red transparent 61-9326.2 61-9336.2 0.002

yellow transparent 61-9326.4 61-9336.4 0.002

concave,

non-illuminative black opaque 61-9226.0 61-9236.0 0.002

grey opaque 61-9226.8 61-9236.8 0.002

white translucent 61-9226.9 61-9236.9 0.002

Lens plastic, flush mounting

Lens

b 24 x 24 mm

Typ-Nr.

a 24 x 30 mm

Typ-Nr. Ø 25 mm

Typ-Nr. e

Lens plastic, flush mounting

illuminative blue transparent flush 61-9671.6 61-9681.6 61-9642.6 0.002

colourless transparent flush 61-9671.7 61-9681.7 61-9642.7 0.002

green transparent flush 61-9671.5 61-9681.5 61-9642.5 0.002

orange transparent flush 61-9671.3 61-9681.3 61-9642.3 0.002

red transparent flush 61-9671.2 61-9681.2 61-9642.2 0.002

smoked transparent flush 61-9671.1 61-9681.1 61-9642.1 0.002

yellow transparent flush 61-9671.4 61-9681.4 61-9642.4 0.002

non-illuminative black opaque flush 61-9771.0 61-9781.0 0.002

grey opaque flush 61-9771.8 61-9781.8 0.002

white translucent flush 61-9771.9 61-9781.9 0.002

01.2009

Accessories

Continuation see next page

The silvery coat is being applied on the lens (screen print) with an additional protective lacquer.

Continuation see next page

The silvery coat is being applied on the lens (screen print) with an additional protective lacquer.

can be hot stamped

Continuation see next page

Lens plastic with symbol, raised mounting

Symbol Lens Ø 24 mm

Typ-Nr. e

Lens plastic with symbol, raised mounting

flush - level, illuminative Ring blue transparent 61-9643.601 0.002

colourless transparent 61-9643.701 0.002

green transparent 61-9643.501 0.002

orange transparent 61-9643.301 0.002

red transparent 61-9643.201 0.002

yellow transparent 61-9643.401 0.002

ON/OFF blue transparent 61-9643.602 0.002

colourless transparent 61-9643.702 0.002

green transparent 61-9643.502 0.002

red transparent 61-9643.202 0.002

Stand by blue transparent 61-9643.603 0.002

colourless transparent 61-9643.703 0.002

green transparent 61-9643.503 0.002

red transparent 61-9643.203 0.002

Lens plastic with symbol, flush mounting

Symbol Lens Ø 25 mm

Typ-Nr. e

Lens plastic with symbol, flush mounting

flush - level, illuminative Ring blue transparent 61-9643.601 0.002

colourless transparent 61-9643.701 0.002

green transparent 61-9643.501 0.002

orange transparent 61-9643.301 0.002

red transparent 61-9643.201 0.002

yellow transparent 61-9643.401 0.002

ON/OFF blue transparent 61-9643.602 0.002

colourless transparent 61-9643.702 0.002

green transparent 61-9643.502 0.002

red transparent 61-9643.202 0.002

Stand by blue transparent 61-9643.603 0.002

colourless transparent 61-9643.703 0.002

green transparent 61-9643.503 0.002

red transparent 61-9643.203 0.002

Marking plate for lens plastic

Marking plate Typ-Nr. e

Marking plate for lens plastic

only applicable with Lens round Typ-Nr. 61-9642.X Plastic colourless transparent 61-9707.7 0.001

01.2009

Accessories

mat

Continuation see next page

mat

Continuation see next page

mat

Continuation see next page

Lens metal with window, raised mounting

Lens Ø 24 mm

Typ-Nr. e

Lens metal with window, raised mounting Aluminium black flush 61-9841.0A 0.002

Aluminium blue flush 61-9841.6A 0.002

Aluminium green flush 61-9841.5A 0.002

Aluminium natural flush 61-9841.8A 0.002

Aluminium red flush 61-9841.2A 0.002

Aluminium yellow flush 61-9841.4A 0.002

Lens metal with window, flush mounting

Lens Ø 25 mm

Typ-Nr. e

Lens metal with window, flush mounting Aluminium black flush 61-9841.0A 0.002

Aluminium blue flush 61-9841.6A 0.002

Aluminium green flush 61-9841.5A 0.002

Aluminium natural flush 61-9841.8A 0.002

Aluminium red flush 61-9841.2A 0.002

Aluminium yellow flush 61-9841.4A 0.002

Lens metal, raised mounting

Lens Ø 24 mm

Typ-Nr. e

Lens metal, raised mounting

convex Aluminium black 61-9842.0 0.003

Aluminium blue 61-9842.6 0.003

Aluminium green 61-9842.5 0.003

Aluminium natural 61-9842.8 0.003

Aluminium red 61-9842.2 0.003

Aluminium yellow 61-9842.4 0.003

flush Aluminium black 61-9841.0 0.002

Aluminium blue 61-9841.6 0.002

Aluminium green 61-9841.5 0.002

Aluminium natural 61-9841.8 0.002

Aluminium red 61-9841.2 0.002

Aluminium yellow 61-9841.4 0.002

01.2009

Accessories

mat

Continuation see next page

Lens metal, flush mounting

Lens Ø 25 mm

Typ-Nr. e

Lens metal, flush mounting

convex Aluminium black 61-9842.0 0.003

Aluminium blue 61-9842.6 0.003

Aluminium green 61-9842.5 0.003

Aluminium natural 61-9842.8 0.003

Aluminium red 61-9842.2 0.003

Aluminium yellow 61-9842.4 0.003

flush Aluminium black 61-9841.0 0.002

Aluminium blue 61-9841.6 0.002

Aluminium green 61-9841.5 0.002

Aluminium natural 61-9841.8 0.002

Aluminium red 61-9841.2 0.002

Aluminium yellow 61-9841.4 0.002

Mushroom-head cap

Mushroom had cap Ø 32 mm

Typ-Nr. e

Mushroom-head cap Plastic black opaque 61-9593.0 0.004

Plastic green opaque 61-9593.5 0.004

Plastic red opaque 61-9593.2 0.004

Plastic yellow opaque 61-9593.4 0.004

Keylock front bezel, raised mounting

Keylock front bezel

b 24 x 24 mm

Typ-Nr.

b 18 x 18 mm

Typ-Nr.

a 18 x 24 mm

Typ-Nr. Ø 18 mm

Typ-Nr. e

Keylock front bezel,

raised mounting Plastic black 61-9250.0 61-9220.0 61-9230.0 61-9210.0 0.001

Keylock front bezel, flush mounting

Keylock front bezel

b 24 x 24 mm

Typ-Nr.

a 24 x 30 mm

Typ-Nr. Ø 25 mm

Typ-Nr. e

Keylock front bezel, flush mounting Plastic black 61-9220.0 61-9230.0 61-9210.0 0.001

01.2009

Accessories

with bar and marking dot

Continuation see next page

with bar and marking dot

Continuation see next page

for devices 25 mm dia., flush mounting

Continuation see next page

Technical drawing from page 59

Lever, raised mountin g

Lever Bar colour Typ-Nr. e

Lever, raised mounting

illuminative Plastic black blue 52-928.60 0.001

green 52-928.50 0.001

orange 52-928.30 0.001

red 52-928.20 0.001

yellow 52-928.40 0.001

Plastic grey blue 52-929.60 0.001

green 52-929.50 0.001

orange 52-929.30 0.001

red 52-929.20 0.001

yellow 52-929.40 0.001

non-illuminative Plastic black black 52-928.0 0.001

white 52-928.9 0.001

Plastic grey grey 52-929.8 0.001

white 52-929.9 0.001

Lever, flush mounting

Lever Bar colour Typ-Nr. e

Lever, flush mounting

illuminative Plastic black blue 61-9028.60 0.001

green 61-9028.50 0.001

orange 61-9028.30 0.001

red 61-9028.20 0.001

yellow 61-9028.40 0.001

Plastic grey blue 61-9029.60 0.001

green 61-9029.50 0.001

orange 61-9029.30 0.001

red 61-9029.20 0.001

yellow 61-9029.40 0.001

non-illuminative Plastic black black 61-9028.0 0.001

white 61-9028.9 0.001

Plastic grey grey 61-9029.8 0.001

white 61-9029.9 0.001

Legend frame

Typ-Nr.

Technical drawing

Legend frame

30 x 50 mm, adhesive, Aluminium black 61-9980.0 10 0.001

01.2009

Accessories

for Legend frame 61-9980.0

Continuation see next page

Mounting dimensions from page 58

Continuation see next page

Mounting dimensions from page 58

Legend pl at e in se rt

Typ-Nr. e

Legend plate insert

14.5 x 23.5 mm, adhesive, Aluminium black 704.968.1 0.001

14.5 x 23.5 mm, adhesive, Aluminium natural 704.968.0 0.001

Front bezel square, raised mounting

Front bezel Typ-Nr. e

Front bezel square, raised mounting

24 x 24 mm, for Selector switch Plastic black 52-950.0 0.001

26 x 26 mm, for Selector switch Plastic black 52-952.0 0.001

Front bezel set for Indicators and Illuminated pus h bu t to n , flu s h mo unting

Front bezel

b 24 x 24 mm

Typ-Nr.

a 24 x 30 mm

Typ-Nr. Ø 25 mm

Typ-Nr.

Mounting dimensions

Front bezel set for Indicators and

Illuminated pushbutton, flush

mounting

Plastic black 61-9930.0 61-9931.0 61-9933.10 4 0.008

Plastic silver 61-9930.4 61-9931.4 4 0.008

Aluminium black 61-9933.1 4 0.006

Aluminium natural 61-9933.0 4 0.006

Front bezel set for Mushroom-head pushbutton, flush mounting

Front bezel Ø 40 mm

Typ-Nr. Ø 32 mm

Typ-Nr.

Mounting dimensions

Front bezel set for Mushroom-head pushbutton, flush

mounting Aluminium natural 61-9934.8 2 0.013

Aluminium black 61-9933.1 2 0.006

Aluminium natural 61-9933.0 2 0.006

Plastic black 61-9933.10 2 0.008

01.2009

Accessories

Continuation see next page

Mounting dimensions from page 58

Continuation see next page

Mounting dimensions from page 58

Continuation see next page

ATTENTION

when using the front protection cover for push buttons the external sealing in the front bezel set and the silicone bellows

in the actuator are to be removed !

Front bezel set for Keylock switch, flush mounting

Front bezel

b 24 x 24 mm

Typ-Nr.

a 24 x 30 mm

Typ-Nr. Ø 25 mm

Typ-Nr.

Mounting dimensions

Front bezel set for Keylock switch,

flush mounting Plastic black 61-9930.0 61-9931.0 61-9932.10 4 0.008

Plastic silver 61-9930.4 61-9931.4 4 0.008

Aluminium black 61-9932.1 4 0.006

Aluminium natural 61-9932.0 4 0.006

Front bezel set for Selector switch, flush mounting

Front bezel

b 24 x 24 mm

Typ-Nr. Ø 25 mm

Typ-Nr.

Mounting dimensions

Front bezel set for Selector switch, flush mounting Plastic black 61-9936.0 4 0.007

Aluminium black 61-9932.1 4 0.006

Aluminium natural 61-9932.0 4 0.006

Plastic black 61-9932.10 4 0.008

Front ring, raised mounting

Front ring Typ-Nr. e

Front ring, raised mounting

for Actuator 24 mm dia. Aluminium black 61-9600.0 0.003

Aluminium natural 61-9600.1 0.003

Front protective cap

Front protective cap Typ-Nr. e

Front protective cap

for front bezel set 24 x 30 mm, flush mounting Silicone natural transparent 61-9927.2 0.001

for front bezel set round, flush mounting Silicone natural transparent 84-9103.7 0.001

01.2009

Accessories

Continuation see next page

Technical drawing from page 59

Continuation see next page

Mounting dimensions from page 58, Technical drawing from page 59

Continuation see next page

Mounting dimensions from page 58

Protective cover, ra ised mounting

b 24 x 24 mm

Typ-Nr.

b 18 x 18 mm

Typ-Nr.

a 18 x 24 mm

Typ-Nr.

Technical drawing

Protective cover, raised mounting

hinged, transparent, with means not for sealing 61-9920.0 5 0.004

hinged, transparent, with means for sealing 51-920 1 0.002

51-925 2 0.002

Protective cover, flush mounting

b 24 x 24 mm

Typ-Nr.

a 24 x 30 mm

Typ-Nr. Ø 25 mm

Typ-Nr.

Mounting dimensions

Technical drawing

Protective cover, flush mounting

hinged, transparent, with means for sealing 61-9921.0 460.006

61-9922.0 470.006

slide by side, with means not for sealing 61-9924.0 480.006

Blind plug, raised mounting

Blind plug

b 24 x 24 mm

Typ-Nr.

b 18 x 18 mm

Typ-Nr.

a 18 x 24 mm

Typ-Nr. Ø 18 mm

Typ-Nr.

Mounting dimensions

Blind plug, raised mounting Plastic black 61-9450.0 51-948.0 51-947.0 51-949.0 3 0.003

01.2009

Accessories

Continuation see next page

Mounting dimensions from page 58, Technical drawing from page 59

Continuation see next page

Other lock numbers on request

Continuation see next page

Terminals: ST = Screw terminal, S1 = Soldering terminal (also pluggable 2.8 x 0.5 mm)

Component layout from page 53, Circuit drawing from page 66

Blind plug, flush mounting

Blind plug

b 24 x 24 mm

Typ-Nr.

a 24 x 30 mm

Typ-Nr. Ø 25 mm

Typ-Nr.

Mounting dimensions

Technical drawing

Blind plug, flush mounting Plastic black 61-9451.0 61-9452.0 4 0.006

61-9453.0 4 13 0.006

Master key

Typ-Nr. e

Master key

Lock numbers 311 ... 445 (DOM) 31-989.300 0.006

Spare key

Typ-Nr. e

Spare key

Emergency-stop, standard lock 1001 (KABA) 14-987.1001 0.006

Key lock switch, standard lock 311 (DOM) 31-989.311 0.006

EMC Key protection cap

Typ-Nr. e

EMC Key protection cap

Plastic black, for lock type DOM 31-985.0 0.005

Backside

Lamp element

Terminals

Typ-Nr.

Component layout

Circuit drawing

Lamp element ST 61-8006.01 31 4 0.005

S1 61-8006.02 3 4 0.005

01.2009

Accessories

Continuation see next page

Terminals: S1 = Soldering terminal (also pluggable 2.8 x 0.5 mm)

Component layout from page 53, Circuit drawing from page 66

only for Indicator actuator

Continuation see next page

Further information in the Technical Data and Typical Applications

Terminals: S = Soldering terminal

Component layout from page 53

Diode element

Terminals

Typ-Nr.

Component layout

Circuit drawing

Diode element

1 Diode S1 61-8101.02 1 20 0.007

2 Diodes S1 61-8102.02 2 21 0.008

Flasher element

Terminals

Typ-Nr.

Component layout

Flasher element

Operation voltage : 12 ... 28 VAC/DC ±10 % S61-8000.05 30 0.005

01.2009

Accessories

Continuation see next page

We offer a Dismantling tool Typ-Nr. 61-9711.0 for dismantling of the Switching element

Diode (1N 4007): D = Diode, - = without

Switching system: SA = Snap-action switching element, SM = Slow-make switching element

Contacts: NO = Normally open, NC = Normally closed

Terminals: S1 = Soldering terminal (also pluggable 2.8 x 0.5 mm), ST = Screw terminal

Contact material: Au/Ag = Gold/Silver, Ag = Silver, Au = Gold

Component layout from page 53, Circuit drawing from page 66

Switching element for Pushbutton | Keylock- and Selector switch 2 positions

Diode (1N 4007)

Switch rating

Switching system

Contacts

Terminals

Contact material

Typ-Nr.

Component layout

Circuit drawing

Switching element for

Pushbutton | Keylock-

and Selector switch

2 positions

with lamp terminal

2 D 250 VAC, 5 A SA 1 NO S1 Au/Ag 61-8212.22 36 28 0.007

Ag 61-8212.12 36 28 0.007

- 250 VAC, 5 A SM 1 NC ST Ag 61-8640.11 23 22 0.008

S1 Ag 61-8640.17 14 23 0.008

1 NC + 1 NO S1 Ag 61-8670.17 13 30 0.008

1 NO ST Ag 61-8610.11 22 27 0.008

S1 Ag 61-8610.17 11 27 0.008

2 NC S1 Ag 61-8650.17 15 24 0.008

2 NO S1 Ag 61-8620.17 12 34 0.008

SA 1 NC S1 Au/Ag 61-8440.22 4 23 0.007

Ag 61-8440.12 4 23 0.007

1 NC + 1 NO S1 Au/Ag 61-8470.22 34 30 0.007

Ag 61-8470.12 34 30 0.007

1 NC + 2 NO S1 Au/Ag 61-8490.22 35 32 0.007

Ag 61-8490.12 35 32 0.007

1 NO S1 Au/Ag 61-8410.22 28 27 0.007

Ag 61-8410.12 28 27 0.007

2 NC S1 Au/Ag 61-8450.22 5 24 0.007

Ag 61-8450.12 5 24 0.007

2 NC + 1 NO S1 Au/Ag 61-8480.22 7 31 0.007

Ag 61-8480.12 7 31 0.007

2 NO S1 Au/Ag 61-8420.22 32 34 0.007

Ag 61-8420.12 32 34 0.007

3 NC S1 Au/Ag 61-8460.22 6 25 0.007

Ag 61-8460.12 6 25 0.007

3 NO S1 Au/Ag 61-8430.22 33 35 0.007

Ag 61-8430.12 33 35 0.007

42 VAC, 100 mA SM 1 NC S1 Au 61-8640.37 14 23 0.008

1 NC + 1 NO S1 Au 61-8670.37 13 30 0.008

1 NO S1 Au 61-8610.37 11 27 0.008

2 NC S1 Au 61-8650.37 15 24 0.008

2 NO S1 Au 61-8620.37 12 34 0.008

without lamp terminal - 250 VAC, 5 A SM 1 NC ST Ag 61-8645.11 25 22 0.008

1 NC + 1 NO ST Ag 61-8675.11 26 29 0.008

1 NO ST Ag 61-8615.11 24 26 0.008

2 NC ST Ag 61-8655.11 29 36 0.008

2 NO ST Ag 61-8625.11 27 33 0.008

01.2009

Accessories

Continuation see next page

We offer a Dismantling tool Typ-Nr. 61-9711.0 for dismantling of the Switching element

Switching system: SM = Slow-make switching element, SA = Snap-action switching element

Contacts: NC = Normally closed, NO = Normally open

Terminals: S1 = Soldering terminal (also pluggable 2.8 x 0.5 mm), ST = Screw term inal

Contact material: Ag = Silver, Au/Ag = Gold/Silver, Au = Gold

Component layout from page 53, Circuit drawing from page 66

Continuation see next page

General specifications for Switching element for Emergency-stop pushbutton : If not otherwise stated, certified according

to EN IEC 60947-5-5. Further specifications in the Technical data

Switching system: SM = Slow-make switching element

Contacts: NC = Normally closed, NO = Normally open

Terminals: ST = Screw terminal, S1 = Soldering terminal (also pluggable 2.8 x 0.5 mm)

Contact material: Ag = Silver

Component layout from page 53, Circuit drawing from page 66

Switching element for Keylock- and Selector switch 3 positions

Switch rating

Switching system

Contacts

Terminals

Contact material

Typ-Nr.

Component layout

Circuit drawing

Switching element for

Keylock- and Selector switch

3 positions

with lamp terminal

250 VAC, 5 A SM 1 NC + 1 NO S1 Ag 61-8770.17 16 30 0.008

2 NC S1 Ag 61-8750.17 18 24 0.008

2 NO S1 Ag 61-8720.17 17 34 0.008

SA 1 NC + 1 NO S1 Au/Ag 61-8574.22 10 30 0.008

Ag 61-8574.12 10 30 0.008

2 NC S1 Au/Ag 61-8550.22 8 24 0.008

Ag 61-8550.12 8 24 0.008

2 NO S1 Au/Ag 61-8520.22 9 34 0.008

Ag 61-8520.12 9 34 0.008

42 VAC, 100 mA SM 1 NC + 1 NO S1 Au 61-8770.37 16 30 0.008

2 NC S1 Au 61-8750.37 8 24 0.008

2 NO S1 Au 61-8720.37 9 34 0.008

without lamp terminal 250 VAC, 5 A SM 1 NC + 1 NO ST Ag 61-8775.11 26 37 0.008

2 NC ST Ag 61-8755.11 29 36 0.008

2 NO ST Ag 61-8725.11 27 33 0.008

Switching element for Emergency-s top pushbutton, foolproof EN IEC 60947-5-5

Switch rating

Switching system

Contacts

Terminals

Contact material

Typ-Nr.

Component layout

Circuit drawing

Switching element for Emergency-

stop pushbutton, foolproof EN IEC

60947-5-5

250 VAC, 5 A SM 1 NC ST Ag 61-8745.11 25 38 0.008

S1 Ag 61-8745.17 20 38 0.008

1 NC + 1 NO ST Ag 61-8775.11 26 37 0.008

S1 Ag 61-8775.17 19 37 0.008

2 NC ST Ag 61-8755.11 29 36 0.008

S1 Ag 61-8755.17 21 36 0.008

01.2009

Accessories

Continuation see next page

Switching system: SM = Slow-make switching element

Contacts: NC = Normally closed, NO = Normally open

Terminals: S1 = Soldering terminal (also pluggable 2.8 x 0.5 mm)

Contact material: Au = Gold

Component layout from page 53, Circuit drawing from page 66

Continuation see next page

Terminals: P = PCB terminal

Component layout from page 53

Continuation see next page

Switching element for Stop pushbutton, foolproof

Switch rating

Switching system

Contacts

Terminals

Contact material

Typ-Nr.

Component layout

Circuit drawing

Switching element for Stop push-

button, foolproof 42 VAC, 100 mA SM 1 NC S1 Au 61-8745.37 20 38 0.008

1 NC + 1 NO S1 Au 61-8775.37 19 37 0.008

2 NC S1 Au 61-8755.37 21 36 0.008

PCB plug-in base

Terminals

Typ-Nr.

Component layout

PCB plug-in base

13.1 dia. x 12.8 mm for Indicator complete P61-9820.1 37 0.002

15 x 23 x 9.4 mm for Snap-action Switching element, Indicator- and Diode element, Pins axial P 61-9821.1 38 0.003

17.7 x 23.6 x 10.9 mm for Slow-make Switching element, Pins axial P 61-9823 39 0.002

Multi-plug housing

Typ-Nr. e

Multi-plug housing

for Snap-action Switching element, max. 6 connections possible 61-9830 0.002

Flat receptacle

Typ-Nr. e

Flat receptacle

2.8 x 0.5 mm for Multi-plug housing 51-943.1 0.001

2.8 x 0.5 mm for Plug-in terminal 31-946 0.001

01.2009

Accessories

Continuation see next page

Insulation sleeve

Typ-Nr. e

Insulation sleeve

for Flat receptacles 31-946 31-929 0.001

Terminal cover

Typ-Nr. e

Terminal cover

for Indicator complete 61-9831.2 0.001

for Snap-action Switching element with soldering terminal 61-9830.2 0.002

Illumination

Filament lamp

Socket Operating voltage/-current Typ-Nr. e

Filament lamp T1 3/4 MG 12 VAC/DC, 75 mA 10-1309.1309 0.001

14 VAC/DC, 80 mA 10-1310.1319 0.001

18 VAC/DC, 40 mA 10-1311.1249 0.001

24 VAC/DC, 35 mA 10-1312.1229 0.001

28 VAC/DC, 30 mA 10-1313.1209 0.001

28 VAC/DC, 40 mA 10-1313.1249 0.001

36 VAC/DC, 20 mA 10-1316.1179 0.001

36 VAC/DC, 30 mA 10-1316.1209 0.001

48 VAC/DC, 20 mA 10-1319.1179 0.001

48 VAC/DC, 25 mA 10-1319.1199 0.001

6 VAC/DC, 120 mA 10-1306.1349 0.001

6.3 VAC/DC, 200 mA 10-1307.1369 0.001

01.2009

Accessories

Continuation see next page

Note:

AC operation through halve-wave rectifier possible, slight flickering can occure.

for fitting with series resistors

Continuation see next page

Mounting hole size 16 mm dia.

Continuation see next page

Single-LED

Socket Light colour Operating voltage/-current Typ-Nr. e

Single-LED T1 3/4 MG blue 12 VAC/DC, 7/14 mA 10-2J09.1066 0.002

24 VAC/DC, 7/14 mA 10-2J12.1066 0.002

28 VAC/DC, 7/14 mA 10-2J13.1066 0.002

48 VAC/DC, 4/8 mA 10-2J19.1046 0.002

6 VDC, 15 mA 10-2J06.3146 0.002

green 12 VAC/DC, 4/7 mA 10-2J09.1065 0.002

24 VAC/DC, 4/7 mA 10-2J12.1065 0.002

28 VAC/DC, 4/7 mA 10-2J13.1065 0.002

48 VAC/DC, 2/4 mA 10-2J19.1045 0.002

6 VDC, 7 mA 10-2J06.3145 0.002

red 12 VAC/DC, 7/14 mA 10-2J09.1062 0.002

24 VAC/DC, 7/14 mA 10-2J12.1062 0.002

28 VAC/DC, 7/14 mA 10-2J13.1062 0.002

48 VAC/DC, 4/8 mA 10-2J19.1042 0.002

6 VDC, 15 mA 10-2J06.3142 0.002

white diffuse 12 VAC/DC, 7/14 mA 10-2J09.1069 0.002

24 VAC/DC, 7/14 mA 10-2J12.1069 0.002

28 VAC/DC, 7/14 mA 10-2J13.1069 0.002

48 VAC/DC, 4/8 mA 10-2J19.1049 0.002

6 VDC, 15 mA 10-2J06.3149 0.002

yellow 12 VAC/DC, 7/14 mA 10-2J09.1064 0.002

24 VAC/DC, 7/14 mA 10-2J12.1064 0.002

28 VAC/DC, 7/14 mA 10-2J13.1064 0.002

48 VAC/DC, 4/8 mA 10-2J19.1044 0.002

6 VDC, 15 mA 10-2J06.3144 0.002

Terminal plate empty

Typ-Nr. e

Terminal plate empty

10 spaces 125 x 60 x 15 mm 02-912.2 0.045

15 spaces 187.5 x 60 x 15 mm 02-912.3 0.090

20 spaces 250 x 60 x 15 mm 02-912.4 0.095

5 spaces 62.5 x 60 x 15 mm 02-912.1 0.025

Emergency-stop pushbutton

Emergency-stop label

Marking Typ-Nr. e

Emergency-stop label

43 mm dia., yellow ARRET-D´URGENCE 61-9970.3 0.002

EMERGENCY-STOP 61-9970.2 0.002

NOT-AUS 61-9970.1 0.002

NOT-HALT 61-9970.6 0.002

without marking 61-9970.0 0.002

01.2009

Accessories

Continuation see next page

Technical drawing from page 59

Bottom grey similar RAL 7035; cover lead-sealable, yellow similar RAL 1004

Continuation see next page

Openings for cable gland M16 or M20.

Protection class IP 66.

Technical drawing from page 59

Continuation see next page

with traction relief; protection degree IP 68.

Continuation see next page

Emergency-stop protective shroud

Typ-Nr.

Technical drawing

Emergency-stop protective shroud

Aluminium anodized, yellow varnished 61-9965 11 0.036

Emergency-stop enclosures

Dimension Typ-Nr.

Technical drawing

Emergency-stop enclosures

with mounting hole size 16 mm dia., without anti- twist device L 65 mm, W 65 mm, H 57 mm 61-9480.5 12 0.099

Cable gland

Typ-Nr. e

Cable gland

M16, Plastic grey 61-9481.6 0.007

M20, Plastic grey 704.945.6 0.011

Assembling

Fixing nut

Typ-Nr. e

Fixing nut

Metal, specifically for keylock switches 31-991 0.005

Plastic, standard delivery 61-9915.0 0.002

01.2009

Accessories

Continuation see next page

without Keylock- and Selector switch

Continuation see next page

consists of Lens remover, Lamp-and LED remover, Mounting tool, Dismantling tool

Continuation see next page

for dismantling keep care of the enclosed Packing insert

Continuation see next page

CAUTION

A switching process might be released when replacing the lamp/LED !

Continuation see next page

Anti-twist ring

Typ-Nr. e

Anti-twist ring

Mounting hole size 16 mm dia. 51-910 0.001

Mounting hole size 22.5 mm dia. 61-9912.0 0.002

Reducing ring

Typ-Nr. e

Reducing ring

only for use of devices with Front size 24 x 24 mm and 24 mm dia., Mounting hole size 22.5 mm dia.

to 16.5 mm dia.

61-9960 0.003

Tool set

Typ-Nr. e

Tool set K61-999.100 0.048

Lens remover

Typ-Nr. e

Lens remover

for flush mounting 61-9730.0 0.011

for raised mounting 02-905 0.011

Lamp remover

Typ-Nr. e

Lamp remover 61-9740.0 0.003

Mounting tool

Typ-Nr. e

Mounting tool

for Indicator 16 mm dia. 01-907 0.020

01.2009

Accessories

Continuation see next page

Grey similar RAL 7035; cover lead-sealable

Continuation see next page

Openings for cable gland M16 or M20.

Protection class IP 66.

Technical drawing from page 59

Continuation see next page

with traction relief; protection degree IP 68.

Dismantling tool

Typ-Nr. e

Dismantling tool

for dismantling of the Switching element 61-9711.0 0.004

Flat receptacle remover

Typ-Nr. e

Flat receptacle remover

for removing the Flat receptacle of the Multi-plug in housing 51-943.9 0.001

Enclosure

Dimension Typ-Nr.

Technical drawing

Enclosure

with mounting hole size 16 mm dia., without anti- twist device L 65 mm, W 65 mm, H 57 mm 61-9480.6 12 0.099

Cable gland

Typ-Nr. e

Cable gland

M16, Plastic grey 61-9481.6 0.007

M20, Plastic grey 704.945.6 0.011

01.2009

Technical Data

Switching system

Self-cleaning, double-break snap-action switching system with

contact opening width 2 x 0.5 mm (switch with small contact

opening width as per EN IEC 61058-1).

The switching elements are optionally equipped with the following

switching functions :

One to three normally open (NO) or normally closed (NC), or any

combination of NO and NC plus connections for T1 3/4 LED or lamp.

The number of switching elements cannot exceed three.

The switching elements provided for the 3-position switch actuators

are equipped with max. 2 NC or 2 NO or any combination. The

number of switching elements cannot exceed two.

Material

Lens

Raised mounting Polymethylmethacrylat (PMMA), as per UL 94

HB, flush mounting Polycarbonat (PC), as per UL 94 V0, or

Aluminium anodized

Front bezel

Polyetherimid (PEI), as per UL 94 V0, or Aluminium anodized

Front ring

Aluminium anodized

Material of contact

Silver or silver with gold plating

Switching element

Diallylphthalate (DAP), as per UL 94 V0 and Polyamide (PA 66), as

per UL 94 V0

Actuator housing

Polyetherimide (PEI), as per UL 94 V0, self-extinguishing

Mechanical characteristics

Terminals

Actuating torque

Actuating force

Actuating travel

Rebound time

The rebound times apply to normal manual activation

Mechanical lifetime

as per DIN IEC 60512-5-6 and EN IEC 60947-5-1

Electrical characteristics

Standards

The devices comply with : EN IEC 61058-1 and EN IEC 60947-5-1

Rated Operational Voltage Ue

250 VAC/DC as per EN IEC 60947-1

Rated Insulation Voltage Ui

320 VAC, as per EN IEC 60947-5-1

Rated Impulse Withstand Voltage Uimp

4 kV, as per EN IEC 60947-5-1

Contact resistance

New state with silver contact ≤100 mΩ

as per DIN IEC 60512-2-4, measured at 100 mA, 10 V

New state with gold plated contact ≤50 mΩ

as per DIN IEC 60512-2-3, measured at 20 mV, 10 mA

Electrical life

≥50.000 cycles of operation at 250 VAC, 5 A, cosφ 0.95, as per EN

IEC 60947-5-1

Electrostatic discharge (ESD)

Conventional free air thermal current Ith

5 A, as per EN IEC 60947-5-1

the maximum current in continuous operation and at ambient

temperature must not exceed the quoted maximum values.

Switch rating

Switch rating AC with silver contact or silver contact with gold

plating, service category AC-15, as per EN IEC 60947-5-1

Switch rating DC for silver contact or silver contact with gold plating,

service category DC-13, as per EN IEC 60947-5-1

Recommended minimum operational data

Electric strength

2500 VAC, 50 Hz, 1 min., as per DIN IEC 60512-2-11

between all terminals and earth

Overvoltage category

III, as per EN IEC 60947-5-1

Protection class

Class II, as per EN IEC 61058-1

Degree of pollution

3, as per EN IEC 60947-1

Actuator with snap-action switching element

- Solder rigid flexible superflexible

1 wire 0.5 ... 1.5 mm² 0.5 ... 0.75 mm² 0.5 mm²

2 wires 0.75 mm² 0.5 mm²

Selector-/ Keylock switch 2.5 ... 10 Ncm

Pushbutton 2.7 ... 3.6 N

Pushbutton 3 mm

Selector-/ keylock switch 2 positions 3 positions

Momentary action approx. 42 ° approx. 2 x 42 °

Maintained action approx. 90 ° approx. 2 x 90 °

Contact making 3 ms

Contact breaking 5 ms

Pushbutton maintained action 1 million cycles of operation

Pushbutton momentary action 2 million cycles of operation

Emergency-stop switch 6 050 cycles of operation

Keylock switch 50 000 cycles of operation

Selector switch 100 000 cycles of operation

Keylock switch 11 kV

Voltage 125 VAC 250 VAC

Current 2.5 A 2 A

Voltage 250 VDC

Current 0.15 A

Material of contact Silver Silver with gold plating

Voltage 20 VAC/DC 5 VAC/DC

Current 100 mA 10 mA

01.2009

Technical Data

Environmental conditions

Storage temperature

-40 °C ... +85 °C

Operating temperature

-25 °C ... +55 °C

Protection degree

as per EN IEC 60529

Frontside IP 65 | backside IP 40

Shock resistance

(semi-sinusoidal)

max. 100 m/s², pulse width 11 ms, 3-axis, as per EN IEC 60068-2-

Vibration resistance

(sinusoidal)

max. 100 m/s² at 10 Hz ... 500 Hz, as per EN IEC 60068-2-6

Climate resistance

Damp heat, cyclic

96 hours, +25 °C / 97 %, +55 °C / 93 % relative humidity, as per EN

IEC 60068-2-30

Damp heat, state

56 days, +40 °C / 93 % relative humidity, as per EN IEC 60068-2-78

Rapid change of temperature

100 cycles, -40 °C ... +80 °C, as per EN IEC 60068-2-14

Approvals

Approbations

CB (IEC 61058)

CB (IEC 60947)

CSA

ENEC (EN 61058)

Germanischer Lloyd

GOST

VDE

Declaration of conformity

RoHS

Switching system

Double-break slow-make system, contact opening width 2 x 1.5

mm, with 2 x 2 contact points per switching element.

NC-contact elements in the slow-make elements fulfill requirements

of switches with forced opening as per EN IEC 60947-5-1 2.17

The slow-make elements are optionally obtainable with the

following switching functions : 1 NO or 2 NO, 1 NC or 2 NC, 1 NO +

1 NC.

Material

Lens

Raised mounting Polymethylmethacrylat (PMMA), as per UL 94

HB, flush mounting Polycarbonat (PC), as per UL 94 V0, or

Aluminium anodized

Front bezel

Polyetherimid (PEI), as per UL 94 V0, or Aluminium anodized

Front ring

Aluminium anodized

Material of contact

Silver or gold (specified for operation for low level switching)

Switching element

Diallylphthalate (DAP), as per UL 94 V0 and Polyamide (PA 66), as

per UL 94 V0

Actuator housing

Polyetherimide (PEI), as per UL 94 V0, self-extinguishing

Mechanical characteristics

Terminals

Actuating torque

Actuating force

Actuating travel

Rebound time

2 ms, contact making and contact breaking

the rebound times apply to normal manual activation

Mechanical lifetime

as per DIN IEC 60512-5-6 and EN IEC 60947-5-1

Electrical characteristics

Standards

The devices comply with : EN IEC 61058-1 and EN IEC 60947-5-1,

EN IEC 60947-5-5 (Emergency-stop)

Electrical life

≥50.000 cycles of operation at 250 VAC, 5 A, cosφ 0.95, as per EN

IEC 60947-5-1

Switching Element of Emergency-stop 6050 cycles of operation, as

per EN IEC 60947-5-5

Electrostatic discharge (ESD)

Electric strength

4000 VAC, 50 Hz, 1 min., as per DIN IEC 60512-2

between all terminals and earth

Actuator with slow-make switching element

- Solder rigid flexible superflexible

1 wire 0.5 ... 1.5 mm² 0.5 ... 0.75 mm² 0.5 mm²

2 wires 0.75 mm² 0.5 mm²

- Screw

1 wire 0.5 ... 1.5 mm² 0.5 ... 0.75 mm² 0.5 mm²

2 wires 0.75 mm² 0.5 mm² 0.5 mm²

Selector-/ Keylock switch 4 ... 16 Ncm

Pushbutton 3.5 ... 11 N

Emergency-stop switch max. 65 N

Pushbutton 3 mm

Emergency-stop switch 10 mm

Selector-/ keylock switch 2 positions 3 positions

Momentary action approx. 42 ° approx. 2 x 42 °

Maintained action approx. 90 ° approx. 2 x 90 °

Pushbutton maintained action 1 million cycles of operation

Pushbutton momentary action 2 million cycles of operation

Emergency-stop switch 6 050 cycles of operation

Keylock switch 50 000 cycles of operation

Selector switch 100 000 cycles of operation

Keylock switch 11 kV

01.2009

Technical Data

Overvoltage category

III, as per EN IEC 60947-5-1

Protection class

Class II, as per EN IEC 61058-1

Degree of pollution

3, as per EN IEC 60947-1

Electrical characteristics for silver contacts

Rated Operational Voltage Ue

250 VAC/DC as per EN IEC 60947-1

Rated Insulation Voltage Ui

320 VAC, as per EN IEC 60947-5-1

Rated Impulse Withstand Voltage Uimp

4 kV, as per EN IEC 60947-5-1

Contact resistance

New state ≤50 mΩ, as per DIN IEC 60512-2-4, measured at

100 mA, 10 V

Conventional free air thermal current Ith

5 A, as per EN IEC 60947-5-1

the maximum current in continuous operation and at ambient

temperature must not exceed the quoted maximum values.

Switch rating

Switch rating AC with silver contact and srew terminal, service

category AC-15, as per EN IEC 60947-5-1

Switch rating with silver contact and screw terminal, service

category DC-13, as per EN IEC 60947-5-1

Recommended minimum operational data

20 VAC/DC, 100 mA

Electrical characteristics for gold contacts

Rated Operational Voltage Ue

50 VAC/DC, as per EN IEC 60947-5-1

Rated Insulation Voltage Ui

Ui = 320 VAC, as per EN IEC 60947-5-1

Rated Impulse Withstand Voltage Uimp

0.8 kV, as per EN IEC 60947-1

Contact resistance

New state ≤50 mΩ

as per DIN IEC 60512-2-4, measured at 20 mV, 10 mA

Conventional free air thermal current Ith

3 A, as per EN IEC 60947-5-1

the maximum current in continuous operation and at ambient

temperature must not exceed the quoted maximum values.

Switch rating

Switch rating AC with gold contact, service category AC-15, as per

EN IEC 60947-5-1

Switch rating with gold contact, service category DC-13, as per EN

IEC 60947-5-1

Recommended minimum operational data

Environmental conditions

Storage temperature

-40 °C ... +85 °C

Operating temperature

-25 °C ... +55 °C

Protection degree

as per EN IEC 60529

Frontside IP 65 | backside IP 40

Shock resistance

(semi-sinusoidal)

max. 100 m/s², pulse width 11 ms, 3-axis, as per EN IEC 60068-2-

Vibration resistance

(sinusoidal)

max. 100 m/s² at 10 Hz ... 500 Hz, as per EN IEC 60068-2-6

Climate resistance

Damp heat, cyclic

96 hours, +25 °C / 97 %, +55 °C / 93 % relative humidity, as per EN

IEC 60068-2-30

Damp heat, state

56 days, +40 °C / 93 % relative humidity, as per EN IEC 60068-2-78

Rapid change of temperature

100 cycles, -40 °C ... +80 °C, as per EN IEC 60068-2-14

Approvals

Approbations

CB (IEC 61058)

CB (IEC 60947)

ENEC (EN 61058)

Germanischer Lloyd

GOST

SEV

VDE

Declaration of conformity

RoHS

Voltage 125 VAC 250 VAC

Current 3 A 2 A

Voltage 250 VDC

Current 0.2 A

Voltage 50 VAC

Current 0.5 A

Voltage 50 VDC

Current 0.1 A

Voltage 10 mVAC/DC

Current 2 mA

01.2009

Technical Data

Material

Lens

Raised mounting Polymetylmethacrylat PMMA, as per UL 94 HB,

flush mounting Polycarbonat (PC), as per UL 94 V0

Actuator housing

Polyetherimide (PEI), as per UL 94 V0, self-extinguishing

Flasher element

Polyetherimide (PEI), as per UL 94 V0

Mechanical characteristics

Terminals

Soldering terminal

Electrical characteristics

Illumination

Flashing frequency

1 Hz ±0.25 Hz

Pulse duty factor

approx. 50 %

Operating voltage

12 ... 28 VAC/DC ±10 %

Environmental conditions

Operating temperature

0 °C ... +45 °C

Protection degree

as per EN IEC 60529

Frontside IP 65 | backside IP 40

Actuator with flasher element

Filament lamp 14 V AC/DC 28 VAC/DC

Power consumption 80 mA 44 mA

Single-LED 12 VAC/DC 28 VAC/DC

Power consumption 15 mA 18 mA

Typical Applications

01.2009

When indicators and illuminated pushbuttons equipped with diodes, the user is able to perform a lamp check or wire an alarm

circuit simply with a considerable saving of space.

Diode element

Typical Applications

01.2009

Do not connect terminal B and D simultaneously when powered up. When operating with DC voltage terminal

G must have positive polarity.

Flasher element

Continuous light Flashing light Flashing- or continuous light

Application guidelines

01.2009

When switching inductive loads such as relays, DC motors, and DC soleno ids, it is always important

to absorb surges (e.g. with a diode) to protect the contacts. When these inductive loads are switched

off, a counter emf can severely damage switch contacts and greatly shorten lifetime.

Fig. 1 shows an inductive load with a free-wheeling diode connected in parallel. This free-wheeling

diode provides a path for the inductor current to flow when the current is interrupted by the switch.

Without this free-wheeling diode, the voltage across the coil will be limited only by dielectric break-

down voltages of the circuit or parasitic elements of the coil. This voltage can be kilovolts in amplitude

even when nominal circuit voltages are low (e.g. 12 VDC) see Fig. 2.

The free-wheeling diode should be chosen so that the reverse breakdown voltage is greater than the

voltage driving the inductive load. The DC blocking voltage (VR) of the free-wheeling diode can be

found in the datasheet of a diode. The forward current should be equal or greater than the maximum

current flowing through the load.

To get an efficient protection, the free-wheeling diode must be connected as close as possible

to the inductive load!

Suppressor circuits

Sveral hundred

to several

thousend volts

ON OFF

e = L di

VDC

Switch

Free-wheeling

diode

Inductive

load

Counter emf

over load without free-wheeling diode

Fig. 2

Switching with inductive load

Fig. 1

Marking

01.2009

All dimensions in mm

General notes

1. Engraving

In addition to the most commonly used world

languages, in DIN 1451-3 close spacing, other

typefaces are available as Scandinavian,

Slavic, Greek, Russian and Polish.

Red, blue and black lenses are filled with white

colour. Other colour lenses are filled in black.

Standard height of letters is 2 mm. If the height

is not specified, we will supply 2 mm engraved

letters.

2. Hot stamping

For larger series it is worth considering

markings by means of hot stamping or laser

engraving. We will pleased to advise you.

For letters and figures, typefaces with 2.5 mm,

3 mm and 4 mm are available.

3. Film inserts

Instead of using engraving the lenses can be

fitted with transparent film inserts, as an

alternative.

In the case of use of a smoke-black lens the

fitted film becomes readable only if the lamp is

on.

The film thickness is 0.2 mm.

For lenses 24 mm and 25 mm dia. with Typ-

Nr. 619642.x the marking takes place directly

on the text plate Typ-Nr. 61-9707.7, instead of

a film insert.

Important : Consider pushbutton mounting

orientation before specifying engraving

characters !

Lenses for Indicators | Illuminated pushbuttons, flush mounting

Front size

(Lens) Film insert

max. size Height of letters

hNumber of lines Number of (target value)

capital letters per line Number of (target value)

small letters per line Image

24 x 24

(18 x 18) 15.1 x 15.1 2 4 8 - 9 9 B3

337 - 8 8 B3

424 - 5 5 B3

524 4 - 5 B3

6144B3

812 - 3 2 - 3 B3

24 x 30

(18 x 24) 15.1 x 21 2 4 12 13 B1

58 - 9 9 B2

3 3 10 - 11 11 - 12 B1

47 - 8 8 B2

4278B1

34 - 5 5 B2

525 - 6 6 B1

44 - 5B2

614 - 5 5 B1

23 3 - 4 B2

813 - 4 3 - 4 B1

2 - 3 2 - 3 B2

25 dia.

(19.7 dia.) Marking plate 2 3 6 6 B4

3256B4

4234B4

5123B4

6123B4

8122B4

B1 B2 B4B3

Engraving

Film

abc abc

abc

Marking

01.2009

All dimensions in mm

Lenses for Indicators | Illuminated pushbuttons, raised mounting

Front size

(Lens) Film insert

max. size Height of letters

hNumber of lines Number of (target value)

capital letters per line Number of (target value)

small letters per line Image

18 dia.

(15.8 dia.) 12.8 dia. 2 6 6 B4

325 6 B4

423 4 B4

512 3 B4

612 3 B4

812 2 B4

18 x 18

(15.3 x 15.3) 12.7 x 12.7 2 4 7 - 8 8 B3

336 - 7 7 B3

424 - 5 5 B3

523 - 4 4 B3

613 3 - 4 B3

812 - 3 2 - 3 B3

18 x 24

(15.3 x 21.5) 12.7 x 18.7 2 4 11 12 B1

57 - 8 8 B2

3 3 9 -10 10 - 11 B1

46 - 7 7 B2

427 7 - 8 B1

34 - 5 5 B2

525 - 6 6 B1

3 - 4 4 B2

614 - 5 5 B1

23 3 - 4 B2

813 - 4 3 - 4 B1

2 - 3 2 - 3 B2

24 dia.

(19.7 dia.) Marking plate 2 3 6 6 B4

325 6 B4

423 4 B4

512 3 B4

612 3 B4

812 2 B4

24 x 24

(20 x 20) 16.9 x 16.9 2 4 9 10 B3

337 - 8 9 B3

424 - 5 5 B3

524 4 - 5 B3

614 4 B3

812 2 B3

B1 B2 B4B3

Engraving

Film

abc abc

abc

Marking

01.2009

All dimensions in mm

Engraving legend plates

Height of letters

hNumber of lines Number of (target value)

letters per line

3.0 1 11

3.0 2 11

4.0 1 7

8.0 1 4

Ø25

Drawings

01.2009

1 Diode element page 34

2 Diode element page 34

3 Lamp element page 33

4 Switching element for Pushbutton | Keylock- and Selector switch 2 positions page 35

5 Switching element for Pushbutton | Keylock- and Selector switch 2 positions page 35

6 Switching element for Pushbutton | Keylock- and Selector switch 2 positions page 35

7 Switching element for Pushbutton | Keylock- and Selector switch 2 positions page 35

8 Switching element for Keylock- and Selector switch 3 positions page 36

Component layout

Drawings

01.2009

9 Switching element for Keylock- and Selector switch 3 positions page 36

10 Switching element for Keylock- and Selector switch 3 positions page 36

11 Switching element for Pushbutton | Keylock- and Selector switch 2 positions page 35

12 Switching element for Pushbutton | Keylock- and Selector switch 2 positions page 35

13 Switching element for Pushbutton | Keylock- and Selector switch 2 positions page 35

14 Switching element for Pushbutton | Keylock- and Selector switch 2 positions page 35

15 Switching element for Pushbutton | Keylock- and Selector switch 2 positions page 35

16 Switching element for Keylock- and Selector switch 3 positions page 36

Drawings

01.2009

17 Switching element for Keylock- and Selector switch 3 positions page 36

18 Switching element for Keylock- and Selector switch 3 positions page 36

19 Switching element for Emergency-stop pushbutton, foolproof EN IEC 60947-5-5 page 36 | Switching element for Stop pushbutton,

foolproof page 37

20 Switching element for Emergency-stop pushbutton, foolproof EN IEC 60947-5-5 page 36 | Switching element for Stop pushbutton,

foolproof page 37

21 Switching element for Emergency-stop pushbutton, foolproof EN IEC 60947-5-5 page 36 | Switching element for Stop pushbutton,

foolproof page 37

22 Switching element for Pushbutton | Keylock- and Selector switch 2 positions page 35

23 Switching element for Pushbutton | Keylock- and Selector switch 2 positions page 35

Drawings

01.2009

24 Switching element for Pushbutton | Keylock- and Selector switch 2 positions page 35

25 Switching element for Pushbutton | Keylock- and Selector switch 2 positions page 35 | Switching element for Emergency-stop

pushbutton, foolproof EN IEC 60947-5-5 page 36

26 Switching element for Pushbutton | Keylock- and Selector switch 2 positions page 35 | Switching element for Keylock- and Selector

switch 3 positions page 36 | Switching element for Emergency-stop pushbutton, foolproof EN IEC 60947-5-5 page 36

27 Switching element for Pushbutton | Keylock- and Selector switch 2 positions page 35 | Switching element for Keylock- and Selector

switch 3 positions page 36

28 Switching element for Pushbutton | Keylock- and Selector switch 2 positions page 35

29 Switching element for Pushbutton | Keylock- and Selector switch 2 positions page 35 | Switching element for Keylock- and Selector

switch 3 positions page 36 | Switching element for Emergency-stop pushbutton, foolproof EN IEC 60947-5-5 page 36

30 Flasher element page 34

31 Lamp element page 33

Drawings

01.2009

32 Switching element for Pushbutton | Keylock- and Selector switch 2 positions page 35

33 Switching element for Pushbutton | Keylock- and Selector switch 2 positions page 35

34 Switching element for Pushbutton | Keylock- and Selector switch 2 positions page 35

35 Switching element for Pushbutton | Keylock- and Selector switch 2 positions page 35

36 Switching element for Pushbutton | Keylock- and Selector switch 2 positions page 35

37 PCB plug-in base page 37

Libraries for the PCB layout-system p-cad 200X see : www.pcad.com/recources/libraries Third-party Libraries

38 PCB plug-in base page 37

Libraries for the PCB layout-system p-cad 200X see : www.pcad.com/recources/libraries Third-party Libraries

Drawings

01.2009

39 PCB plug-in base page 37

Libraries for the PCB layout-system p-cad 200X see : www.pcad.com/recources/libraries Third-party Libraries

40 Potentiometer, flush mounting page 24

1 Emergency-stop pushbutton actuator, foolproof EN IEC 60947-5-5 page 13 | Stop pushbutton actuator, foolproof page 14 | Mushroom-

head pushbutton actuator page 14

2 Mushroom-head pushbutton actuator, flush mounting page 20 | Front bezel set for Mushroom-head pushbutton, flush mounting page

Mounting dimensions

Rearview

Potentiometer terminals

Conductor colour of flat ribbon cable

a = blue, b = red, c = yellow

0.2

1.7

0.1

Ø32 = 35 min.

Ø27 = 45 min.

Ø32 = 32 min.

Ø27 = 45 min.

15 +

0.05

Ø27 mm

Ø32 mm

Ø40 = 40 min.

Ø32 = 35 min.

Ø32 mm

Ø40 mm

22.3

0.4

Ø40 = 40 min.

Ø32 = 32 min.

Drawings

01.2009

3 Indicator complete page 11 | Indicator actuator page 11 | Illuminated pushbutton actuator page 12 | Keylock switch actuator 2 positions

page 15 | Keylock switch actuator 3 positions page 16 | Selector switch actuator 2 positions page 17 | Selector switch actuator 3 positions

page 18 | Blind plug, raised mounting page 32

4 Indicator complete, flush mounting page 19 | Indicator actuator, flush mounting page 19 | Illuminated pushbutton actuator, flush

mounting page 20 | Keylock switch actuator 2 positions, flush mounting page 21 | Keylock switch actuator 3 positions, flush mounting

page 22 | Selector switch actuator 2 positions, flush mounting page 23 | Selector switch actuator 3 positions, flush mounting page 24 |

Potentiometer, flush mounting page 24 | Front bezel set for Indicators and Illuminated pushbutton, flush mounting page 30 | Front bezel

set for Keylock switch, flush mounting page 31 | Front bezel set for Selector switch, flush mounting page 31 | Protective cover, flush

mounting page 32 | Blind plug, flush mounting page 33

- Hole spacing min. 26 mm / min. 26 mm by using of the round front protective cap 84-9103.7

- Hole spacing min. 31 mm / min. 25 mm by using of the rectangular fr ont protectice cap 61-9927.2

1 Protective cover, raised mounting page 32

2 Protective cover, raised mounting page 32

Technical drawing

Ø18 mm 18 x 18 mm Ø24 mm

18 x 24 mm 24 x 24 mm

15 +

0.05

24 min.

35 min. with screw terminal

35 min. with screw terminal 35 min. with screw terminal

18 min.

24 min.

24 min.24 min.

16 +

0.2

1.7

0.1

25 min.

30 min.

24 min.

25 min.

Ø25 mm

22.3 +

0.4

27 +

0.25

0.15

21 +

0.25

0.15

24 min.

24 x 30 mm 24 x 24 mm

21 +

0.25

0.15

21 +

0.25

0.15

35 min. with screw terminal

35 min. with screw terminal 35 min. with screw terminal

10.5

25.5

23.5

14.5

23.5

25.5

10.5

Drawings

01.2009

3 Indicator complete pag e 11

4 Indicator complete, flush mounting page 19

5 Protective cover, raised mounting page 32

6 Protective cover, flush mounting page 32

7 Protective cover, flush mounting page 32

Ø 24 mm 24 x 24 mm

Ø 18 mm 18 x 18 mm

18 x 24 mmm

2.8 x 0.5

8 max.

10.6 42

Ø 25 mm 24 x 24 mm

24 x 30 mm

5.5 max.

249

2.8 x 0.5

39.7

14.726.4

13.25

245.5 max.

4.5

245.5 max.

4.5

Drawings

01.2009

8 Protective cover, flush mounting page 32

9 Potentiometer, flush mounting page 24

10 Legend frame page 29

11 Emergency-stop protective shroud page 40

12 Emergency-stop enclosures page 40 | Enclosure page 42

Ø25

29.3 1.5 min.

5.5 max.

4 max.

23 max.

Ø16

300 24 x 24 mm Ø 25 mm

14.5

23.5

Ø25

0.3

Ø48

Ø40

Drawings

01.2009

13 Blind plug, flush mounting page 33

14 Indicator actuator page 11

15 Mushroom-head pushbutton actuator page 14

1...5

23.5

16.5 min.

20.5 max.

Soldering terminal Screw terminalSoldering terminal Soldering terminal

Diode element Lamp elementLamp element Flasher element

Ø 24 mm

Ø 18 mm 18 x 18 mm18 x 24 mm 24 x 24 mm

10.6

Ø14.5

2.8 x 0.5

8 max.

42 46 6542

Snap-action switching element

Soldering terminal

Low-make switching element

Soldering terminal

Low-make switching element

Screw terminal

Ø 32 mm

44 46

18.1

2.8 x 0.5

8 max.

2.8 x 0.5

Drawings

01.2009

16 Illuminated pushbutton actuator page 12

17 Keylock switch actuator 2 positions page 15 | Keylock switch actuator 3 positions page 16

18 Selector switch actuator 2 positions page 17 | Selector switch actuator 3 positions page 18

Snap-action switching element

Soldering terminal

Slow-make switching element

Screw terminal

Slow-make switching element

Soldering terminal

Ø 24 mm 24 x 24 mm

Ø 18 mm 18 x 18 mm

18 x 24 mm

10.6 42 4644

2.8 x 0.5

8 max.

Snap-action switching element

Soldering terminal

Slow-make switching element

Screw terminal

Slow-make switching element

Soldering terminal

35 42 4644

2.8 x 0.5

6.5 max.

24 x 24 mm

Ø 18 mm 18 x 18 mm

18 x 24 mm

Snap-action switching element

Soldering terminal

Slow-make switching element

Soldering terminal

Slow-make switching element

Screw terminal

Ø 18 mm 26 x 26 mm

24 x 24 mm

44 46

2.8 x 0.5

max. 8

Drawings

01.2009

19 Emergency-stop pushbutton actuator, foolproof EN IEC 60947-5-5 page 13 | Stop pushbutton actuator, foolproof page 14

20 Illuminated pushbutton actuator, flush mounting page 20

21 Indicator actuator, flush mounting page 19

Ø 27 mm Ø 27 mm

Slow-make switching element

Soldering terminal

Slow-make switching element

Screw terminal

59.5 44 46

2.8 x 0.5

33.5

max. 6

Snap-action switching element

Soldering terminal

Slow-make switching element

Screw terminal

Slow-make switching element

Soldering terminal

5.5 max.

249 54

2.8 x 0.5

Ø 25 mm 24 x 24 mm24 x 30 mm

Diode element

Soldering terminal

Lamp element

Screw terminal

Lamp element

Soldering terminal

Flasher element

Soldering terminal

Ø 25 mm 24 x 24 mm

24 x 30 mm

5.5 max.

249 54 73

2.8 x 0.5

Ø14.5

Drawings

01.2009

22 Keylock switch actuator 2 positions, flush mounting page 21 | Keylock switch actuator 3 positions, flush mounting page 22

23 Selector switch actuator 2 positions, flush mounting page 23 | Selector switch actuator 3 positions, flush mounting page 24

24 Mushroom-head pushbutton actuator, flush mounting page 20

Snap-action switching element

Soldering terminal

Slow-make switching element

Screw terminal

Slow-make switching element

Soldering terminal

Ø 25 mm 24 x 24 mm

24 x 30 mm

2.8 x 0.5

5.5 max.

Snap-action switching element

Soldering terminal

Slow-make switching element

Screw terminal

Slow-make switching element

Soldering terminal

Ø 25 mm 24 x 24 mm

5.5 max.

249 54

2.8 x 0.5

Ø 32 mm

Snap-action switching element

Soldering terminal

Slow-make switching element

Screw terminal

Slow-make switching element

Soldering terminal

5.5 max.

249 54

2.8 x 0.5

Drawings

01.2009

1 Potentiometer, flush mounting page 24

2 Mushroom-head pushbutton actuator page 14 | Illuminated pushbutton actuator, flush mounting page 20 | Mushroom-head pushbutton

actuator, flush mounting page 20

3 Mushroom-head pushbutton actuator page 14 | Illuminated pushbutton actuator, flush mounting page 20 | Mushroom-head pushbutton

actuator, flush mounting page 20

4 Indicator complete page 11 | Indicator actuator page 11 | Indicator complete, flush mounting page 19 | Indicator actuator, flush mounting

page 19 | Lamp element page 33

5 Emergency-stop pushbutton actuator, foolproof EN IEC 60947-5-5 page 13 | Stop pushbutton actuator, foolproof page 14

6 Illuminated pushb utton actuator page 12

7 Selector switch actuator 2 positions page 17 | Selector switch actuator 2 positions, flush mounting page 23

8 Selector switch actuator 2 positions page 17 | Selector switch actuator 2 positions, flush mounting page 23

9 Selector switch actuator 3 positions page 18 | Selector switch actuator 3 positions, flush mounting page 24

10 Selector switch actuator 3 positions page 18 | Selector switch actuator 3 positions, flush mounting page 24

11 Selector switch actuator 3 positions page 18 | Selector switch actuator 3 positions, flush mounting page 24

12 Selector switch actuator 3 positions page 18 | Selector switch actuator 3 positions, flush mounting page 24

Circuit drawing

(blue) a (red) b (yellow) c

Drawings

01.2009

13 Illuminated pushbutton actuator page 12

14 Keylock switch actuator 3 positions page 16 | Keylock switch act uator 3 positions, flush mounting page 22

15 Keylock switch actuator 3 positions page 16 | Keylock switch act uator 3 positions, flush mounting page 22

16 Keylock switch actuator 2 positions page 15 | Keylock switch act uator 2 positions, flush mounting page 21

17 Keylock switch actuator 2 positions page 15 | Keylock switch act uator 2 positions, flush mounting page 21

18 Keylock switch actuator 3 positions page 16 | Keylock switch act uator 3 positions, flush mounting page 22

19 Keylock switch actuator 3 positions page 16 | Keylock switch act uator 3 positions, flush mounting page 22

20 Diode element page 34

21 Diode element page 34

22 Switching element for Pushbutton | Keylock- and Selector switch 2 positions page 35

23 Switching element for Pushbutton | Keylock- and Selector switch 2 positions page 35

Drawings

01.2009

24 Switching element for Pushbutton | Keylock- and Selector switch 2 positions page 35 | Switching element for Keylock- and Selector

switch 3 positions page 36

25 Switching element for Pushbutton | Keylock- and Selector switch 2 positions page 35

26 Switching element for Pushbutton | Keylock- and Selector switch 2 positions page 35

27 Switching element for Pushbutton | Keylock- and Selector switch 2 positions page 35

28 Switching element for Pushbutton | Keylock- and Selector switch 2 positions page 35

29 Switching element for Pushbutton | Keylock- and Selector switch 2 positions page 35

30 Switching element for Pushbutton | Keylock- and Selector switch 2 positions page 35 | Switching element for Keylock- and Selector

switch 3 positions page 36

31 Switching element for Pushbutton | Keylock- and Selector switch 2 positions page 35

Drawings

01.2009

32 Switching element for Pushbutton | Keylock- and Selector switch 2 positions page 35

33 Switching element for Pushbutton | Keylock- and Selector switch 2 positions page 35 | Switching element for Keylock- and Selector

switch 3 positions page 36

34 Switching element for Pushbutton | Keylock- and Selector switch 2 positions page 35 | Switching element for Keylock- and Selector

switch 3 positions page 36

35 Switching element for Pushbutton | Keylock- and Selector switch 2 positions page 35

36 Switching element for Pushbutton | Keylock- and Selector switch 2 positions page 35 | Switching element for Keylock- and Selector

switch 3 positions page 36 | Switching element for Emergency-stop pushbutton, foolproof EN IEC 60947-5-5 page 36 | Switching element

for Stop pushbutton, foolproof page 37

37 Switching element for Keylock- and Selector switch 3 positions page 36 | Switching element for Emergen cy-stop pushbutton,

foolproof EN IEC 60947-5-5 page 36 | Switching element for Stop pushbutton, foolproof page 37

38 Switching element for Emergency-stop pushbutton, foolproof EN IEC 60947-5-5 page 36 | Switching element for Stop pushbutton,

foolproof page 37

Index from Typ-Nr.

01.2009

Typ-Nr. Page Typ-Nr. Page Typ-Nr. Page

01-907 ........................................41

02-905 ........................................41

02-912.1 .....................................39

02-912.2 .....................................39

02-912.3 .....................................39

02-912.4 .....................................39

10-1306.1349 .............................38

10-1307.1369 .............................38

10-1309.1309 .............................38

10-1310.1319 .............................38

10-1311.1249 .............................38

10-1312.1229 .............................38

10-1313.1209 .............................38

10-1313.1249 .............................38

10-1316.1179 .............................38

10-1316.1209 .............................38

10-1319.1179 .............................38

10-1319.1199 .............................38

10-2J06.3142 .............................39

10-2J06.3144 .............................39

10-2J06.3145 .............................39

10-2J06.3146 .............................39

10-2J06.3149 .............................39

10-2J09.1062 .............................39

10-2J09.1064 .............................39

10-2J09.1065 .............................39

10-2J09.1066 .............................39

10-2J09.1069 .............................39

10-2J12.1062 .............................39

10-2J12.1064 .............................39

10-2J12.1065 .............................39

10-2J12.1066 .............................39

10-2J12.1069 .............................39

10-2J13.1062 .............................39

10-2J13.1064 .............................39

10-2J13.1065 .............................39

10-2J13.1066 .............................39

10-2J13.1069 .............................39

10-2J19.1042 .............................39

10-2J19.1044 .............................39

10-2J19.1045 .............................39

10-2J19.1046 .............................39

10-2J19.1049 .............................39

14-987.1001 ...............................33

31-929 ........................................38

31-946 ........................................37

31-985.0 .....................................33

31-989.300 .................................33

31-989.311 .................................33

31-991 ........................................40

51-910 ........................................41

51-920 ........................................32

51-925 ........................................32

51-943.1 .....................................37

51-943.9 .....................................42

51-947.0 .....................................32

51-948.0 .....................................32

51-949.0 .....................................32

52-928.0 .....................................29

52-928.20 ...................................29

52-928.30 ...................................29

52-928.40 ...................................29

52-928.50 ...................................29

52-928.60 ...................................29

52-928.9 .....................................29

52-929.20 ...................................29

52-929.30 ...................................29

52-929.40 ...................................29

52-929.50 ...................................29

52-929.60 ...................................29

52-929.8 .....................................29

52-929.9 .....................................29

52-950.0 .....................................30

52-952.0 .....................................30

61-0000.02 .................................19

61-0009.0 ...................................19

61-0010.02 .................................11

61-0019.0 ...................................11

61-0020.02 .................................11

61-0029.0 ...................................11

61-0030.02 .................................11

61-0039.0 ...................................11

61-0040.02 .................................11

61-0049.0 ...................................11

61-0050.02 .................................11

61-0059.0 ...................................11

61-1100.0 ...................................20

61-1110.0 ...................................12

61-1120.0 ...................................12

61-1130.0 ...................................12

61-1140.0 ...................................12

61-1140.0 ...................................14

61-1150.0 ...................................12

61-1200.0 ...................................20

61-1210.0 ...................................12

61-1220.0 ...................................12

61-1230.0 ...................................12

61-1240.0 ...................................12

61-1240.0 ...................................14

61-1250.0 ...................................12

61-1300.0 ...................................20

61-1310.0 ...................................12

61-1320.0 ...................................12

61-1330.0 ...................................12

61-1350.0 ...................................12

61-2101.0/D ............... .................15

61-2101.0/D ............... .................21

61-2201.0/D ............... .................15

61-2201.0/D ............... .................21

61-2203.0/D ............... .................15

61-2203.0/D ............... .................21

61-2205.0/D ............... .................15

61-2205.0/D ............... .................21

61-2501.0/D ............... .................16

61-2501.0/D ............... .................22

61-2601.0/D ............... .................16

61-2601.0/D ............... .................22

61-2602.0/D ............... .................16

61-2602.0/D ............... .................22

61-2603.0/D ............... .................16

61-2603.0/D ............... .................22

61-2604.0/D ............... .................16

61-2604.0/D ............... .................22

61-2605.0/D ....... ......................... 16

61-2605.0/D ....... ......................... 22

61-2606.0/D ....... ......................... 16

61-2606.0/D ....... ......................... 22

61-2607.0/D ....... ......................... 16

61-2607.0/D ....... ......................... 22

61-2701.0/D ....... ......................... 16

61-2701.0/D ....... ......................... 22

61-2703.0/D ....... ......................... 16

61-2703.0/D ....... ......................... 22

61-2705.0/D ....... ......................... 16

61-2705.0/D ....... ......................... 22

61-2801.0/D ....... ......................... 16

61-2801.0/D ....... ......................... 22

61-2802.0/D ....... ......................... 16

61-2802.0/D ....... ......................... 22

61-2804.0/D ....... ......................... 16

61-2804.0/D ....... ......................... 22

61-3440.4/1 ................................13

61-3440.4/1S ..............................13

61-3440.4/2 ................................13

61-3440.4/5 ................................13

61-3440.4/8 ................................14

61-3440.4/D ....... ......................... 13

61-4110.0 ...................................17

61-4110.0 ...................................23

61-4210.0 ...................................17

61-4210.0 ...................................23

61-4510.0 ...................................18

61-4510.0 ...................................24

61-4610.0 ...................................18

61-4610.0 ...................................24

61-4710.0 ...................................18

61-4710.0 ...................................24

61-4810.0 ...................................18

61-4810.0 ...................................24

61-4970.10 .................................24

61-4970.13 .................................24

61-5441.0/KA .............................14

61-5441.4/K ................................13

61-8000.05 .................................34

61-8006.01 .................................33

61-8006.02 .................................33

61-8101.02 .................................34

61-8102.02 .................................34

61-8212.12 .................................35

61-8212.22 .................................35

61-8410.12 .................................35

61-8410.22 .................................35

61-8420.12 .................................35

61-8420.22 .................................35

61-8430.12 .................................35

61-8430.22 .................................35

61-8440.12 .................................35

61-8440.22 .................................35

61-8450.12 .................................35

61-8450.22 .................................35

61-8460.12 .................................35

61-8460.22 .................................35

61-8470.12 .................................35

61-8470.22 .................................35

61-8480.12 .................................35

61-8480.22 .................................35

Index from Typ-Nr.

01.2009

Typ-Nr. Page Typ-Nr. Page Typ-Nr. Page

61-8490.12 .................................35

61-8490.22 .................................35

61-8520.12 .................................36

61-8520.22 .................................36

61-8550.12 .................................36

61-8550.22 .................................36

61-8574.12 .................................36

61-8574.22 .................................36

61-8610.11 .................................35

61-8610.17 .................................35

61-8610.37 .................................35

61-8615.11 .................................35

61-8620.17 .................................35

61-8620.37 .................................35

61-8625.11 .................................35

61-8640.11 .................................35

61-8640.17 .................................35

61-8640.37 .................................35

61-8645.11 .................................35

61-8650.17 .................................35

61-8650.37 .................................35

61-8655.11 .................................35

61-8670.17 .................................35

61-8670.37 .................................35

61-8675.11 .................................35

61-8720.17 .................................36

61-8720.37 .................................36

61-8725.11 .................................36

61-8745.11 .................................36

61-8745.17 .................................36

61-8745.37 .................................37

61-8750.17 .................................36

61-8750.37 .................................36

61-8755.11 .................................36

61-8755.17 .................................36

61-8755.37 .................................37

61-8770.17 .................................36

61-8770.37 .................................36

61-8775.11 .................................36

61-8775.17 .................................36

61-8775.37 .................................37

61-9028.0 ...................................29

61-9028.20 .................................29

61-9028.30 .................................29

61-9028.40 .................................29

61-9028.50 .................................29

61-9028.60 .................................29

61-9028.9 ...................................29

61-9029.20 .................................29

61-9029.30 .................................29

61-9029.40 .................................29

61-9029.50 .................................29

61-9029.60 .................................29

61-9029.8 ...................................29

61-9029.9 ...................................29

61-9210.0 ...................................28

61-9211.0 ...................................25

61-9211.8 ...................................25

61-9211.9 ...................................25

61-9220.0 ...................................28

61-9220.0 ................................... 28

61-9221.0 ................................... 25

61-9221.8 ................................... 25

61-9221.9 ................................... 25

61-9226.0 ................................... 25

61-9226.8 ................................... 25

61-9226.9 ................................... 25

61-9230.0 ................................... 28

61-9231.0 ................................... 25

61-9231.8 ................................... 25

61-9231.9 ................................... 25

61-9236.0 ................................... 25

61-9236.8 ................................... 25

61-9236.9 ................................... 25

61-9250.0 ................................... 28

61-9251.0 ................................... 25

61-9251.8 ................................... 25

61-9251.9 ................................... 25

61-9311.1 ................................... 25

61-9311.2 ................................... 25

61-9311.3 ................................... 25

61-9311.4 ................................... 25

61-9311.5 ................................... 25

61-9311.6 ................................... 25

61-9311.7 ................................... 25

61-9321.1 ................................... 25

61-9321.2 ................................... 25

61-9321.3 ................................... 25

61-9321.4 ................................... 25

61-9321.5 ................................... 25

61-9321.6 ................................... 25

61-9321.7 ................................... 25

61-9326.2 ................................... 25

61-9326.3 ................................... 25

61-9326.4 ................................... 25

61-9326.5 ................................... 25

61-9326.6 ................................... 25

61-9326.7 ................................... 25

61-9331.1 ................................... 25

61-9331.2 ................................... 25

61-9331.3 ................................... 25

61-9331.4 ................................... 25

61-9331.5 ................................... 25

61-9331.6 ................................... 25

61-9331.7 ................................... 25

61-9336.2 ................................... 25

61-9336.3 ................................... 25

61-9336.4 ................................... 25

61-9336.5 ................................... 25

61-9336.6 ................................... 25

61-9336.7 ................................... 25

61-9351.1 ................................... 25

61-9351.2 ................................... 25

61-9351.3 ................................... 25

61-9351.4 ................................... 25

61-9351.5 ................................... 25

61-9351.6 ................................... 25

61-9351.7 ................................... 25

61-9450.0 ................................... 32

61-9451.0 ................................... 33

61-9452.0 ................................... 33

61-9453.0 ................................... 33

61-9480.5 ...................................40

61-9480.6 ...................................42

61-9481.6 ...................................40

61-9481.6 ...................................42

61-9593.0 ...................................28

61-9593.2 ...................................28

61-9593.4 ...................................28

61-9593.5 ...................................28

61-9600.0 ...................................31

61-9600.1 ...................................31

61-9642.1 ...................................25

61-9642.2 ...................................25

61-9642.3 ...................................25

61-9642.4 ...................................25

61-9642.5 ...................................25

61-9642.6 ...................................25

61-9642.7 ...................................25

61-9643.201 ...............................26

61-9643.202 ...............................26

61-9643.203 ...............................26

61-9643.301 ...............................26

61-9643.401 ...............................26

61-9643.501 ...............................26

61-9643.502 ...............................26

61-9643.503 ...............................26

61-9643.601 ...............................26

61-9643.602 ...............................26

61-9643.603 ...............................26

61-9643.701 ...............................26

61-9643.702 ...............................26

61-9643.703 ...............................26

61-9671.1 ...................................25

61-9671.2 ...................................25

61-9671.3 ...................................25

61-9671.4 ...................................25

61-9671.5 ...................................25

61-9671.6 ...................................25

61-9671.7 ...................................25

61-9681.1 ...................................25

61-9681.2 ...................................25

61-9681.3 ...................................25

61-9681.4 ...................................25

Index from Typ-Nr.

01.2009

Typ-Nr. Page Typ-Nr. Page Typ-Nr. Page

61-9681.5 ...................................25

61-9681.6 ...................................25

61-9681.7 ...................................25

61-9707.7 ...................................26

61-9711.0 ...................................42

61-9730.0 ...................................41

61-9740.0 ...................................41

61-9771.0 ...................................25

61-9771.8 ...................................25

61-9771.9 ...................................25

61-9781.0 ...................................25

61-9781.8 ...................................25

61-9781.9 ...................................25

61-9820.1 ...................................37

61-9821.1 ...................................37

61-9823 ......................................37

61-9830 ......................................37

61-9830.2 ...................................38

61-9831.2 ...................................38

61-9841.0 ...................................27

61-9841.0 ...................................28

61-9841.0A ............ .....................27

61-9841.2 ...................................27

61-9841.2 ...................................28

61-9841.2A ............ .....................27

61-9841.4 ...................................27

61-9841.4 ...................................28

61-9841.4A ............ .....................27

61-9841.5 ...................................27

61-9841.5 ...................................28

61-9841.5A ............ .....................27

61-9841.6 ...................................27

61-9841.6 ...................................28

61-9841.6A ............ .....................27

61-9841.8 ...................................27

61-9841.8 ...................................28

61-9841.8A ............ .....................27

61-9842.0 ...................................27

61-9842.0 ...................................28

61-9842.2 ...................................27

61-9842.2 ...................................28

61-9842.4 ...................................27

61-9842.4 ...................................28

61-9842.5 ...................................27

61-9842.5 ...................................28

61-9842.6 ...................................27

61-9842.6 ...................................28

61-9842.8 ...................................27

61-9842.8 ...................................28

61-9912.0 ...................................41

61-9915.0 ...................................40

61-9920.0 ...................................32

61-9921.0 ...................................32

61-9922.0 ...................................32

61-9924.0 ...................................32

61-9927.2 ...................................31

61-9930.0 ...................................30

61-9930.0 ...................................31

61-9930.4 ...................................30

61-9930.4 ...................................31

61-9931.0 ...................................30

61-9931.0 ...................................31

61-9931.4 ...................................30

61-9931.4 ...................................31

61-9932.0 ...................................31

61-9932.1 ...................................31

61-9932.10 .................................31

61-9933.0 ...................................30

61-9933.1 ...................................30

61-9933.10 .................................30

61-9934.8 ...................................30

61-9936.0 ...................................31

61-9960 ......................................41

61-9965 ......................................40

61-9970.0 ...................................39

61-9970.1 ...................................39

61-9970.2 ...................................39

61-9970.3 ...................................39

61-9970.6 ...................................39

61-9980.0 ...................................29

704.945.6 ...................................40

704.945.6 ...................................42

704.968.0 ...................................30

704.968.1 ...................................30

84-9103.7 ...................................31

K61-999.100 ............................... 41

EAO AG

Tannwaldstrasse 88

4601 Olten, Switzerland

E-mail info@eao.com

Website www.eao.com

Austria

Phone +49 201 85 87 0

Fax +49 201 85 87 210

E-mail sales.ede@eao.com

Belgium

Phone +32 3 777 82 36

Fax +32 3 777 84 19

E-mail sales.ebl@eao.com

China

Phone +852 27 86 91 41

Fax +852 27 86 95 61

E-mail sales.ehk@eao.com

France

Phone +33 1 64 43 37 37

Fax +33 1 64 43 37 49

E-mail sales.ese@eao.com

Germany

Phone +49 201 85 87 0

Fax +49 201 85 87 210

E-mail sales.ede@eao.com

Italy

Phone +39 035 481 0189

Fax +39 035 481 3786

E-mail sales.eit@eao.com

Japan

Phone +81 3 5444 5411

Fax +81 3 5444 0345

E-mail sales.esj@eao.com

Netherlands

Phone +31 78 653 17 00

Fax +31 78 653 17 99

E-mail sales.enl@eao.com

Sweden

Phone +46 8 683 86 60

Fax +46 8 724 29 12

E-mail sales.esw@eao.com

Switzerland

Phone +41 62 388 95 00

Fax +41 62 388 95 55

E-mail sales.ech@eao.com

United Kingdom

Phone +44 1444 236 000

Fax +44 1444 236 641

E-mail sales.euk@eao.com

USA

Phone +1 203 877 4577

Fax +1 203 877 3694

E-mail sales.eus@eao.com

Other Countries

Phone +41 62 286 92 10

Fax +41 62 296 21 62

E-mail info@eao.com

EAO reserves the right to alter speciﬁcations without further notice