1NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com
SPECIFICATIONS ARE SUBJECT TO CHANGE
Surface Mount Aluminum Electrolytic Capacitors NACKA Series
FEATURES
• CYLINDRICAL V-CHIP CONSTRUCTION FOR SURFACE MOUNTING
• LOW IMPEDANCE AND WIDE TEMPERATURE
• LONG LIFE (5,000 HOURS @ 105OC)
• AVAILABLE WITH ANTI-VIBRATION WIDE TERMINATIONS
• DESIGNED FOR AUTOMATIC MOUNTING AND REFLOW SOLDERING
CHARACTERISTICS
Rated Voltage Range 6.3 ~ 100Vdc
Rated Capactance Range 47 ~ 6,800µF
Operating Temperature Range -55°C ~ +105°C
Capacitance Tolerance ±20%(M)
Maximum Leakage Current
after 2 minutes @ 20°C 0.01CV whichever is greater
Maximum Tanδ @ 120Hz/20°C
W.V. (Vdc) 6.3 10 16 25 35 50 63 80 100
S.V. (Vdc) 8.0 13 20 32 44 63 79 100 125
All Case Sizes
C ≤ 1,000µF 0.26 0.19 0.16 0.14 0.12 0.12 0.10 0.08 0.07
C = 1,500µF - - 0.16 0.16 0.12 - - - -
C = 2,200µF - 0.21 - 0.16 - - - - -
C = 3,300µF 0.30 - 0.20 0.18 - - - - -
C = 4,700µF - 0.25 0.22 - - - - - -
C = 6,800µF 0.36 0.29 - - - - - - -
Low Temperature Stability
Impedance Ratio @ 120Hz
Z -25°C/Z +20°C 2 2 2 2 2 2 2 2 2
Z -40°C/Z +20°C 3 3 3 3 3 3 3 3 3
Z -55°C/Z +20°C 4 4 4 3 3 3 3 3 3
Load Life Test @ 105°C
5,000 Hours
Capacitance Change Within ±30% of initial measured value
TanδLess than 200% of specied value
Leakage Current Less than specied maximum value
Shelf Life Test @ 105°C
1,000 Hours
Capacitance Change Within ±30% of initial measured value
TanδLess than 200% of specied value
Leakage Current Less than specied maximum value
Resistance to Soldering Heat
Within Recommended
Reow Conditions
Capacitance Change Within ±10% of initial measured value
TanδLess than specied maximum value
Leakage Current Less than specied maximum value
NACK rev. 1 05212007
STANDARD PRODUCT AND CASE SIZE Dφ xL (mm)
Cap (µF) Code Working Voltage (Vdc)
6.3 10 16 25 35 50 63 80 100
47 470 - - - - - - - - 12.5x14
68 680 - - - - - - - 12.5x14 12.5x14
100 101 - - - - - - - 12.5x14 16x17
150 151 - - - - - - 12.5x14 12.5x14 16x17
220 221 - - - - - - 12.5x14 - 18x17
330 331 - - - - - 12.5x14 - 16x17 18x17
390 391 - - - - - 12.5x14 - - -
470 471 - - - - 12.5x14 16x17 16x17 18x17 -
560 561 - - - - - 16x17 - - -
680 681 - - - - 12.5x14 16x17 18x17 - -
1000 102 - - - 12.5x14 16x17 16x17 - - -
1500 152 - - 12.5x14 16x17 16x17 - - - -
2200 222 - 12.5x14 - 16x17 - - - - -
3300 332 12.5x14 - 16x17 18x17 - - - - -
4700 472 - 16x17 18x17 - - - - - -
6800 682 16x17 18x17 - - - - - - -
*See Part Number System for Details
RoHS
Compliant
includes all homogeneous materials
PRECAUTIONS
Please review the notes on correct use, safety and precautions found at
https://www.niccomp.com/resource/les/aluminum/AlumApplInfoCautions.pdf
If in doubt or uncertainty, please review your specic application - process details with
NIC’s technical support personnel: tpmg@niccomp.com
2NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com
SPECIFICATIONS ARE SUBJECT TO CHANGE
NIC Part Number* Cap.
(µF)
W.V.
(Vdc)
Dissipaton Factor
(Tan δ)
Max. Ripple Current (mA)
+105°C/100KHz
Max. Impedance (Ω)
+20°C/100KHz
Load Life Hours
@ +105°C
NACKA332M6.3V12.5X14TR13F 3300 6.3 0.30 1100 0.060 5,000
NACKA682M6.3V16X17TR13F 6800 0.36 1800 0.035 5,000
NACKA222M10V12.5X14TR13F 2200
10
0.21 1100 0.060 5,000
NACKA472M10V16X17TR13F 4700 0.25 1800 0.035 5,000
NACKA682M10V18X17TR13F 6800 0.29 2060 0.033 5,000
NACKA152M16V12.5X14TR13F 1500
16
0.16 1100 0.060 5,000
NACKA332M16V16X17TR13F 3300 0.20 1800 0.035 5,000
NACKA472M16V18X17TR13F 4700 0.22 2060 0.033 5,000
NACKA102M25V12.5X14TR13F 1000
25
0.14 1100 0.060 5,000
NACKA152M25V16X17TR13F 1500 0.16 1800 0.035 5,000
NACKA222M25V16X17TR13F 2200 0.16 1800 0.035 5,000
NACKA332M25V18X17TR13F 3300 0.18 2060 0.033 5,000
NACKA471M35V12.5X14TR13F 470
35
0.12 1100 0.060 5,000
NACKA681M35V12.5X14TR13F 680 0.12 1100 0.060 5,000
NACKA102M35V16X17TR13F 1000 0.12 1800 0.035 5,000
NACKA152M35V16X17TR13F 1500 0.12 1800 0.035 5,000
NACKA331M50V12.5X14TR13F 330
50
0.12 900 0.120 5,000
NACKA391M50V12.5X14TR13F 390 0.12 900 0.120 5,000
NACKA471M50V16X17TR13F 470 0.12 1610 0.073 5,000
NACKA561M50V16X17TR13F 560 0.12 1610 0.073 5,000
NACKA681M50V16X17TR13F 680 0.12 1610 0.073 5,000
NACKA102M50V16X17TR13F 1000 0.12 1610 0.073 5,000
NACKA151M63V12.5X14TR13F 150
63
0.10 800 0.160 5,000
NACKA221M63V12.5X14TR13F 220 0.10 800 0.160 5,000
NACKA471M63V16X17TR13F 470 0.10 1410 0.082 5,000
NACKA681M63V18X17TR13F 680 0.10 1680 0.080 5,000
NACKA680M80V12.5X14TR13F 68
80
0.08 500 0.320 5,000
NACKA101M80V12.5X14TR13F 100 0.08 500 0.320 5,000
NACKA151M80V12.5X14TR13F 150 0.08 500 0.320 5,000
NACKA331M80V16X17TR13F 330 0.08 793 0.170 5,000
NACKA471M80V18X17TR13F 470 0.08 917 0.153 5,000
NACKA470M100V12.5X14TR13F 47
100
0.07 500 0.320 5,000
NACKA680M100V12.5X14TR13F 68 0.07 500 0.320 5,000
NACKA101M100V16X17TR13F 100 0.07 793 0.170 5,000
NACKA151M100V16X17TR13F 150 0.07 793 0.170 5,000
NACKA221M100V18X17TR13F 220 0.07 917 0.153 5,000
NACKA331M100V18X17TR13F 330 0.07 917 0.153 5,000
STANDARD VALUES, CASE SIZES AND SPECIFICATIONS
Surface Mount Aluminum Electrolytic Capacitors NACKA Series
120Hz 1KHz 10KHz 100KHz
0.75 0.90 0.95 1.00
RIPPLE CURRENT FREQUENCY CORRECTION FACTORS
NACKA 102 M 35V 16x17 TR 13 P WT F
RoHS Compliant
Optional WT = Wide Terminal
Optional plastic reel (standard material is cardboard). See page 4 & 5
330mm (13”) Reel
Tape & Reel
Size in mm
Working Voltage
Tolerance Code M=20%
Capacitance Code in µF, rst 2 digits are signicant
Third digit is no. of zeros, “R” indicates decimal for
values under 10µF
Series
PART NUMBER SYSTEM
3NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com
SPECIFICATIONS ARE SUBJECT TO CHANGE
Case Size Dφ ±0.5 L max. A, B ± 0.2 H max. I ± 0.3 P ± 0.3 W R S T
12.5 x 14 12.5 14.0 13.5 15.0 4.7 4.4 0.90 ± 0.30 - - -
16 x 17 16.0 17.0 17.0 19.0 5.5 6.7 1.20 ± 0.30 - - -
18 x 17 18.0 17.0 19.0 21.0 6.7 6.7 1.20 ± 0.30 - - -
12.5 x 14WT 12.5 14.3 13.5 15.0 4.7 4.4 1.20 ± 0.30 2.2 ± 0.2 7.1 ± 0.2 2.4 ± 0.2
16 x 17WT 16.0 17.3 17.0 19.0 5.5 6.7 1.40 ± 0.20 3.0 ± 0.2 9.0 ± 0.2 1.9 ± 0.2
18 x 17WT 18.0 17.3 19.0 21.0 6.7 6.7 1.40 ± 0.20 3.0 ± 0.2 11.0 ± 0.2 1.9 ± 0.2
DIMENSIONS (mm)
Surface Mount Aluminum Electrolytic Capacitors NACKA Series
B
W
P
A
W
P
A
RR
S
B
Termination deection:
Standard = ±0.30mm
WT = -0.1mm ~ +0.15mm
Dφ
L
H
STANDARD
II
+ - II
T
WT STYLE
+ -
Anti-Vibration Skirt
on WT Style
Pressure Relief
Vent
Case Size A B C D E F G H
12.5x14 4.0 5.7 2.0 - - - - -
16x17 6.0 6.5 2.5 - - - - -
18x17 6.0 7.5 2.5 - - - - -
12.5x14WT 3.9 6.0 6.9 2.8 1.3 1.9 2.2 2.5
16x17WT 5.8 6.8 6.2 3.6 1.3 1.9 1.7 2.8
18x17WT 5.8 7.3 6.2 3.6 1.8 1.9 1.7 2.8
LAND PATTERN DIMENSIONS (mm)
+-
BB
A
C
Solder Pads
STANDARD TERMINATION
BB
A
+
-
Solder Pads
WT STYLE TERMINATION
FDE
G
G
H
Review & Compare Reow Soldering Heat Limits
V-chip SMT Aluminum Electrolytic Capacitors
www.niccomp.com/RSL
WT (Wide Terminations) Anti-Vibration Test
Test Method
Direction: X, Y, Z axis
Frequency & Duration: 5 to 2000Hz reciprocation for 20 minutes, 2 hours each direction
Peak to Peak Amplitude: 5mm
Peak Acceleration: 30G
Sweep Type: Log
D Capacitance Within ± 10% of initial value
Tangent of Loss < Specied value
Leakage Current < Specied value
4NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com
SPECIFICATIONS ARE SUBJECT TO CHANGE
Surface Mount Aluminum Electrolytic Capacitors NACKA Series
Diameter Rated
Voltage
Time above
217°C
Time above
240°C
Peak
Temperature
Max. Number of
Reow Passes
φ12.5~18
6.3V~35V 90 sec. max. 30 sec. max. 245°C max. 2*
50V~63V 30 sec. max. 5 sec. max. 245°C max. 2*
80V~100V 30 sec. max. 5 sec. max. 245°C max. 1
PEAK REFLOW TEMPERATURE AND DURATION
Time Above 217°C
(see table)
50
100
150
200
Time (Seconds)
Temperature - Deg. C
Preheat - 120 seconds max.
(160°C)
Peak Temperature
(5 sec. max.)
230
*Second reflow shall be at least one hour after natural cool to room temperature.
Note: VPS Soldering is not recommended
Case Size A
±0.5
B
±0.5
C
±0.3
F
±0.1
P
±0.1
T
±0.2
t
±0.1
12.5x14 14.0 14.0 32.0 14.2 24.0 14.5 0.5
16x17 17.5 17.5 44.0 20.2 28.0 17.5 0.5
18x17 19.5 19.5 44.0 20.2 32.0 17.5 0.5
Case Size W
±1.0
Qty per Reel
13" (330mm)
12.5x14 34 200
16x17 46 125
18x17 46 125
2mm ± 0.5mm
φ13mm ± 0.5mm
φ21mm ± 0.8mm
φ330mm ± 2.0mm
φ50mm min.
W
3mm
CARDBOARD REEL DIMENSIONS (mm)
(see page 5 for plastic reel dimensions)
TAPING SPECIFICATIONS (mm)
1. Both Leader and Trailer tape: Minimum 40mm (1.57") empty carrier tape pockets.
2. Leader tape: Approximately 20cm of cover tape at leader.
3. Connection: Maximum 3 connections (slices) per reel.
T
APFeeding
+
-
1.5∅ +0.1/- 1.75 ±
D
B
C
1.5φ+0.1/-0 1.75 + 0.15
t
4 + 0.1
S
5NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com
SPECIFICATIONS ARE SUBJECT TO CHANGE
Surface Mount Aluminum Electrolytic Capacitors NACKA Series
Case Size Tape Width A B C D E
12.5x14 32.0 φ330
±2.0 φ50~105 φ13
±0.5
φ21
±1.0
2.0
±0.5
16x17, 18x17 44.0
Color
Black or Blue
Dimensions (mm)
Case Size Tape Width W1 W2
12.5x14 32.0 32.4 ~ 35.0 36.5 ~ 38.4
16x17, 18x17 44.0 44.4 ~ 47.0 48.2 ~ 50.4
Optional V-Chip 13" (330mm) Plastic Reels (TR13P sufx)
AB
W1
W2
E
D
C
Case Size Qty per Reel
13" (330mm)
12.5x14 200
16x17 125
18x17 125