T-1 (3mm) BLINKING LED LAMP Part Number: L-36BHD Bright Red Features Description z T-1 package with rectangular base. The Bright Red source color devices are made with Gallium z With built-in blinking IC. Phosphide Red Light Emitting Diode. z Operation voltage from 3.5V to 14V. z Blinking frequency from 3.0Hz to 1.5Hz. z RoHS compliant. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the leads emerge from the package. 4. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. SPEC NO: DSAA9012 REV NO: V.8B DATE: APR/03/2013 PAGE: 1 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.Liu ERP: 1101003773 Selection Guide Part No. Dice L-36BHD Bright Red (GaP) Viewing Angle [1] Iv (mcd) V= 9V Lens Type Red Diffused Min. Typ. 21/2 0.6 1.8 60 Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity value is traceable to the CIE127-2007 compliant national standards. Electrical / Optical Characteristics at TA=25C Symbol Parameter Device Min. peak Peak Wavelength Bright Red 700 nm D Dominant Wavelength Bright Red 635 nm 1/2 Spectral Line Half-width Bright Red 45 nm IF Forward Current Bright Red 22 mA Min:VF=3.5V Typ:VF=5V ISON Supply Current Bright Red 8 mA VF=3.5V ISON Supply Current Bright Red 44 mA VF=14V f Blink Frequency Bright Red Hz VF=3.5V~14V 8 Typ. Max. 1.5 3 Units Test Conditions Note: 1.Wavelength value is traceable to the CIE127-2007 compliant national standards. Absolute Maximum Ratings at TA=25C Parameter Bright Red Units Power dissipation 310 mW Forward Voltage 14 V Reverse Voltage 0.5 V Operating Temperature -40C To +70C Storage Temperature -40C To +85C Lead Solder Temperature [1] 260C For 3 Seconds Lead Solder Temperature [2] 260C For 5 Seconds Notes: 1. 2mm below package base. 2. 5mm below package base. SPEC NO: DSAA9012 REV NO: V.8B DATE: APR/03/2013 PAGE: 2 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.Liu ERP: 1101003773 Bright Red L-36BHD SPEC NO: DSAA9012 REV NO: V.8B DATE: APR/03/2013 PAGE: 3 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.Liu ERP: 1101003773 PACKING & LABEL SPECIFICATIONS L-36BHD SPEC NO: DSAA9012 REV NO: V.8B DATE: APR/03/2013 PAGE: 4 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.Liu ERP: 1101003773 SPEC NO: DSAA9012 REV NO: V.8B DATE: APR/03/2013 PAGE: 5 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.Liu ERP: 1101003773 Detailed application notes are listed on our website. http://www.kingbright.com/application_notes SPEC NO: DSAA9012 REV NO: V.8B DATE: APR/03/2013 PAGE: 6 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.Liu ERP: 1101003773