SPEC NO: DSAA9012 REV NO: V.8B DATE: APR/03/2013 PAGE: 1 OF 6
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.Liu ERP: 1101003773
T-1 (3mm) BLINKING LED LAMP
Part Number: L-36BHD Bright Red
Features
zT-1 package with rectangular base.
zWith built-in blinking IC.
zOperation voltage from 3.5V to 14V.
zBlinking frequency from 3.0Hz to 1.5Hz.
zRoHS compliant.
Description
The Bright Red source color devices are made with Gallium
Phosphide Red Light Emitting Diode.
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.25(0.01") unless otherwise noted.
3. Lead spacing is measured where the leads emerge from the package.
4. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice.
SPEC NO: DSAA9012 REV NO: V.8B DATE: APR/03/2013 PAGE: 2 OF 6
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.Liu ERP: 1101003773
Selection Guide
Part No. Dice Lens Type
V
iewing
Angle [1]
Min. Typ. 2θ1/2
L-36BHD Bright Red (GaP) Red Diffused 0.6 1.8 60°
Iv (mcd)
V= 9V
Notes:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value.
2. Luminous intensity value is traceable to the CIE127-2007 compliant national standards.
Absolute Maximum Ratings at TA=25°C
Electrical / Optical Characteristics at TA=25°C
Notes:
1. 2mm below package base.
2. 5mm below package base.
Symbol Parameter Device Min. Typ. Max. Units Test Conditions
λpeak Peak Wavelength Bright Red 700 nm
λD Dominant Wavelength Bright Red 635 nm
Δλ1/2 Spectral Line Half-width Bright Red 45 nm
IF Forward Current Bright Red 8 22 mA Min:VF=3.5V
Typ:VF=5V
ISON Supply Current Bright Red 8 mA VF=3.5V
ISON Supply Current Bright Red 44 mA VF=14V
f Blink Frequency Bright Red 1.5 3 Hz VF=3.5V~14V
Parameter Bright Red Units
Power dissipation 310 mW
Forward Voltage 14 V
Reverse Voltage 0.5 V
Operating Temperature -40°C To +70°C
Storage Temperature -40°C To +85°C
Lead Solder Temperature [1] 260°C For 3 Seconds
Lead Solder Temperature [2] 260°C For 5 Seconds
Note:
1.Wavelength value is traceable to the CIE127-2007 compliant national standards.
SPEC NO: DSAA9012 REV NO: V.8B DATE: APR/03/2013 PAGE: 3 OF 6
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.Liu ERP: 1101003773
Bright Red L-36BHD
SPEC NO: DSAA9012 REV NO: V.8B DATE: APR/03/2013 PAGE: 4 OF 6
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.Liu ERP: 1101003773
PACKING & LABEL SPECIFICATIONS L-36BHD
SPEC NO: DSAA9012 REV NO: V.8B DATE: APR/03/2013 PAGE: 5 OF 6
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.Liu ERP: 1101003773
SPEC NO: DSAA9012 REV NO: V.8B DATE: APR/03/2013 PAGE: 6 OF 6
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.Liu ERP: 1101003773
Detailed application notes are listed on our website.
http://www.kingbright.com/application_notes