DATA SHEET PHOTOCOUPLER PS9317L,PS9317L2 HIGH CMR, 10 Mbps, OPEN COLLECTOR OUTPUT TYPE, 8 mm CREEPAGE 6-PIN SDIP PHOTOCOUPLER -NEPOC Series- DESCRIPTION The PS9317L and PS9317L2 are optical coupled high-speed, active low type isolators containing a GaAlAs LED on the input side and a photodiode and a signal processing circuit on the output side on one chip. The PS9317L and PS9317L2 are designed specifically for high common mode transient immunity (CMR) and low pulse width distortion. The PS9317L is lead bending type (Gull-wing) for surface mounting. The PS9317L2 is lead bending type for long creepage distance (Gull-wing) for surface mount. FEATURES * Pulse width distortion (tPHL - tPLH = 35 ns MAX.) PIN CONNECTION (Top View) * High common mode transient immunity (CMH, CML = 15 kV/s MIN.) * Half size of 8-pin DIP 6 5 4 * Long creepage distance (8 mm MIN. : PS9317L2) SHIELD * High-speed (10 Mbps) * High isolation voltage (BV = 5 000 Vr.m.s.) * Open collector output * Pb-Free product 1. Anode 2. NC 3. Cathode 4. GND 5. VO 6. VCC * Safety standards * UL approved: No. E72422 <R> * CSA approved: No. CA 101391 (CA5A, CAN/CSA-C22.2 60065, 60950) 1 2 3 * DIN EN60747-5-2 (VDE0884 Part2) approved: No. 40024069 (Option) TRUTH TABLE APPLICATIONS * Measurement equipment * PDP LED Output * FA Network ON L OFF H The information in this document is subject to change without notice. Before using this document, please confirm that this is the latest version. Not all products and/or types are available in every country. Please check with an NEC Electronics sales representative for availability and additional information. Document No. PN10690EJ04V0DS (4th edition) Date Published June 2009 NS Printed in Japan The mark <R> shows major revised points. The revised points can be easily searched by copying an "<R>" in the PDF file and specifying it in the "Find what:" field. 2007, 2009 PS9317L,PS9317L2 PACKAGE DIMENSIONS (UNIT: mm) Lead Bending Type (Gull-wing) For Surface Mount PS9317L 4.580.3 6.80.25 (0.82) 9.70.3 0.250.15 0.20.15 3.50.2 3.70.25 7.62 1.27 0.40.1 0.80.25 0.25 M Lead Bending Type For Long Creepage Distance (Gull-wing) For Surface Mount PS9317L2 4.580.3 6.80.25 (0.82) 11.50.3 1.27 0.40.1 2 0.250.15 0.20.15 3.50.2 3.70.25 7.62 0.750.25 0.25 M Data Sheet PN10690EJ04V0DS PS9317L,PS9317L2 <R> MARKING EXAMPLE Type Number 9317 N931 Assembly Lot No. 1 pin Mark N 9 31 Week Assembled Year Assembled (Last 1 Digit) Rank Code PHOTOCOUPLER CONSTRUCTION Parameter PS9317L PS9317L2 Air Distance (MIN.) 7 mm 8 mm Outer Creepage Distance (MIN.) 7 mm 8 mm 0.4 mm 0.4 mm Isolation Distance (MIN.) ORDERING INFORMATION Part Number Order Number Solder Plating Packing Style Safety Standard Application Part Approval Number Specification PS9317L PS9317L-AX Pb-Free 20 pcs (Tape 20 pcs cut) Standard products PS9317L-E3 PS9317L-E3-AX (Ni/Pd/Au) Embossed Tape 2 000 pcs/reel (UL, CSA approved) PS9317L2 PS9317L2-AX 20 pcs (Tape 20 pcs cut) PS9317L2-E3 PS9317L2-E3-AX Embossed Tape 2 000 pcs/reel PS9317L-V PS9317L-V-AX 20 pcs (Tape 20 pcs cut) DIN EN60747-5-2 PS9317L-V-E3 PS9317L-V-E3-AX Embossed Tape 2 000 pcs/reel (VDE0884 Part2) PS9317L2-V PS9317L2-V-AX 20 pcs (Tape 20 pcs cut) Approved (Option) PS9317L2-V-E3 PS9317L2-V-E3-AX Embossed Tape 2 000 pcs/reel *1 PS9317L PS9317L2 PS9317L PS9317L2 *1 For the application of the Safety Standard, following part number should be used. Data Sheet PN10690EJ04V0DS 3 PS9317L,PS9317L2 ABSOLUTE MAXIMUM RATINGS (TA = 25C, unless otherwise specified) Parameter Symbol Ratings Unit Forward Current IF 20 mA Reverse Voltage VR 5 V Supply Voltage VCC 7 V Output Voltage VO 7 V IO 25 mA PC 40 mW BV 5 000 Vr.m.s. Operating Ambient Temperature TA -40 to +85 C Storage Temperature Tstg -55 to +125 C Diode Detector *1 Output Current Power Dissipation Isolation Voltage *2 *3 *1 Reduced to 0.3 mA/C at TA = 65C or more. *2 Applies to output pin VO (collector pin). Reduced to 1.5 mW/C at TA = 65C or more. *3 AC voltage for 1 minute at TA = 25C, RH = 60% between input and output. Pins 1-3 shorted together, 4-6 shorted together. RECOMMENDED OPERATING CONDITIONS Parameter Symbol MIN. Low Level Input Voltage VFL High Level Input Current Supply Voltage MAX. Unit 0 0.8 V IFH 6 12 mA VCC 4.5 5.5 V TTL (RL = 1 k, loads) N Pull-up Resistor RL 4 TYP. 5.0 5 330 4k Data Sheet PN10690EJ04V0DS PS9317L,PS9317L2 <R> ELECTRICAL CHARACTERISTICS (TA = -40 to +85C, unless otherwise specified) Parameter Diode Symbol Conditions *1 MIN. TYP. 1.2 1.56 MAX. Unit 1.9 V 10 A Forward Voltage VF IF = 10 mA, TA = 25C Reverse Current IR VR = 3 V, TA = 25C Terminal Capacitance Ct V = 0 V, f = 1 MHz, TA = 25C 30 IOH VCC = VO = 5.5 V, VF = 0.8 V 1 100 A VOL VCC = 5.5 V, IF = 5 mA, IOL = 13 mA 0.16 0.6 V High Level Supply Current ICCH VCC = 5.5 V, IF = 0 mA, VO = open 3.5 7 mA Low Level Supply Current ICCL VCC = 5.5 V, IF = 10 mA, VO = open 6.5 10 mA IFHL VCC = 5 V, VO = 0.8 V, RL = 350 2 5 mA RI-O VI-O = 1 kVDC, RH = 40 to 60%, Detector High Level Output Current Low Level Output Voltage *2 Coupled Threshold Input Current pF (H L) Isolation Resistance 10 11 TA = 25C Isolation Capacitance CI-O V = 0 V, f = 1 MHz, TA = 25C 0.7 Propagation Delay Time tPHL VCC = 5 V, RL = 350 , CL = 15 pF, 40 75 tPLH 35 75 Rise Time tr 20 Fall Time tf 5 tPHL-tPLH 5 (H L) *3 ns IF = 7.5 mA, VTHHL = VTHLH = 1.5 V Propagation Delay Time (L H) pF *3 Pulse Width Distortion 35 (PWD) Propagation Delay Skew tPSK Common Mode CMH 15 kV/s 15 kV/s *4 Common Mode Transient Immunity at Low Level Output VCC = 5 V, RL = 350 , TA = 25C, IF = 0 mA, VO > 2 V, VCM = 1.5 kV Transient Immunity at High Level Output 40 CML VCC = 5 V, RL = 350 , TA = 25C, IF = 7.5 mA, VO < 0.8 V, VCM = 1.5 kV *4 Data Sheet PN10690EJ04V0DS 5 PS9317L,PS9317L2 *1 Typical values at TA = 25C. *2 Because VOL of 2 V or more may be output when the LED current is input and when output supply of VCC = 2.6 V or less, it is important to confirm the characteristics (operation with the power supply on and off) during design, before using this device. *3 Test circuit for propagation delay time Pulse input (IF) (PW = 1 s, Duty cycle = 1/10) Input (monitor) 1 6 2 5 3 4 SHIELD 0.1 F RL = 350 VO (monitor) CL = 15 pF (IF = 7.5 mA) Input VCC = 5 V 50% 0V 5V VOH Output 51 tPHL tPLH 1.5 V VOL Remark CL includes probe and stray wiring capacitance. *4 Test circuit for common mode transient immunity SW IF VCC = 5 V 1 6 2 5 3 SHIELD 0.1 F 4 RL = 350 VO (monitor) CL = 15 pF VCM = 1.5 kV VCM 90% 10% 0V tr VO (IF = 0 mA) VCM + - VO (IF = 7.5 mA) tf VOH 2V 0.8 V VOL Remark CL includes probe and stray wiring capacitance. USAGE CAUTIONS 1. This product is weak for static electricity by designed with high-speed integrated circuit so protect against static electricity when handling. 2. By-pass capacitor of more than 0.1 F is used between VCC and GND near device. Also, ensure that the distance between the leads of the photocoupler and capacitor is no more than 10 mm. 3. Pin 2 (which is an NC*1 pin) can either be connected directly to the GND pin on the LED side or left open. <R> Unconnected pins should not be used as a bypass for signals or for any other similar purpose because this may degrade the internal noise environment of the device. *1 NC: Not connected (No connection) 4. Avoid storage at a high temperature and high humidity. 6 Data Sheet PN10690EJ04V0DS PS9317L,PS9317L2 TYPICAL CHARACTERISTICS (TA = 25C, unless otherwise specified) DETECTOR POWER DISSIPATION vs. AMBIENT TEMPERATURE MAXIMUM FORWARD CURRENT vs. AMBIENT TEMPERATURE 50 Detector Power Dissipation PC (mW) Maximum Forward Current IF (mA) 25 20 15 10 5 0 20 40 80 85 60 100 20 10 20 80 85 60 FORWARD CURRENT vs. FORWARD VOLTAGE SUPPLY CURRENT vs. AMBIENT TEMPERATURE 100 10 TA = +85C +50C +25C 0C -40C 1 0.1 1.2 1.4 1.6 1.8 2.0 2.2 Vcc = 5.5 V 8 6 ICCL (IF = 10 mA) 4 ICCH (IF = 0 mA) 2 0 -50 2.4 -25 Forward Voltage VF (V) 0 25 50 75 100 Ambient Temperature TA (C) LOW LEVEL OUTPUT VOLTAGE vs. AMBIENT TEMPERATURE OUTPUT VOLTAGE vs. FORWARD CURRENT 0.5 6 Low Level Output Voltage VOL (V) VCC = 5.5 V 5 4 3 2 RL = 350 1.0 k 1 0 40 Ambient Temperature TA (C) High Level Supply Current ICCH (mA) Low Level Supply Current ICCL (mA) Forward Current IF (mA) 30 Ambient Temperature TA (C) 10 0.01 1.0 40 0 100 Output Voltage VO (V) <R> 4.0 k 1 2 3 4 5 6 IF = 5.0 mA, VCC = 5.5 V 0.4 IOL = 16.0 mA 13.0 mA 10.0 mA 6.0 mA 0.3 0.2 0.1 0 -50 -25 0 25 50 75 100 Ambient Temperature TA (C) Forward Current IF (mA) Remark The graphs indicate nominal characteristics. Data Sheet PN10690EJ04V0DS 7 PS9317L,PS9317L2 PROPAGATION DELAY TIME vs. AMBIENT TEMPERATURE THRESHOLD INPUT CURRENT vs. AMBIENT TEMPERATURE Propagation Delay Time tPHL, tPLH (ns) 5 Threshold Input Current IFHL (mA) VCC = 5.0 V, VO = 0.8 V 4 RL = 350 1.0 k 3 4.0 k 2 1 0 -50 -25 0 25 50 75 100 100 IF = 7.5 mA, VCC = 5.0 V 80 60 40 tPLH: RL = 350 20 tPLH: RL = 1.0 k 0 -50 Ambient Temperature TA (C) Propagation Delay Time tPHL, tPLH (ns) Pulse Width Distortion tPHL-tPLH (ns) 0 25 50 75 100 PROPAGATION DELAY TIME vs. FORWARD CURRENT IF = 7.5 mA, VCC = 5.0 V 40 RL = 4.7 k RL = 4.0 k 30 20 RL = 350 RL = 1.0 k -25 0 25 50 75 100 IF = 7.5 mA, VCC = 5.0 V tPLH: RL = 4.7 k 80 tPLH: RL = 4.0 k 60 tPLH: RL = 350 tPLH: RL = 1.0 k 40 20 tPHL: RL = 350 , 1.0 k, 4.0 k, 4.7 k 0 5 7 9 11 Forward Current IF (mA) Ambient Temperature TA (C) Remark The graphs indicate nominal characteristics. 8 -25 100 50 0 -50 tPHL: RL = 350 , 1.0 k, 4.0 k, 4.7 k Ambient Temperature TA (C) PULSE WIDTH DISTORTION vs. AMBIENT TEMPERATURE 10 tPLH: RL = 4.0 k tPLH: RL = 4.7 k Data Sheet PN10690EJ04V0DS 13 15 PS9317L,PS9317L2 TAPING SPECIFICATIONS (UNIT: mm) 7.50.1 1.5 +0.1 -0 4.5 MAX. 10.20.1 4.00.1 16.00.3 2.00.1 1.750.1 Outline and Dimensions (Tape) 1.5 +0.1 -0 0.35 8.00.1 5.080.1 4.050.1 Tape Direction PS9317L-E3 Outline and Dimensions (Reel) 2.00.5 13.00.2 R 1.0 1001.0 2.00.5 3302.0 <R> 21.00.8 17.51.0 21.51.0 Packing: 2 000 pcs/reel Data Sheet PN10690EJ04V0DS 15.9 to 19.4 Outer edge of flange 9 PS9317L,PS9317L2 1.750.1 Outline and Dimensions (Tape) 11.50.1 1.5 +0.1 -0 4.5 MAX. 12.00.1 4.00.1 24.00.3 2.00.1 2.0 +0.1 -0 8.00.1 0.35 4.050.1 5.080.1 Tape Direction PS9317L2-E3 Outline and Dimensions (Reel) R 1.0 1001.0 2.00.5 13.00.2 3302.0 2.00.5 21.00.8 25.51.0 29.51.0 Packing: 2 000 pcs/reel 10 Data Sheet PN10690EJ04V0DS 23.9 to 27.4 Outer edge of flange PS9317L,PS9317L2 RECOMMENDED MOUNT PAD DIMENSIONS (UNIT: mm) C D B <R> A Part Number Lead Bending A B C D PS9317L lead bending type (Gull-wing) for surface mount 8.2 1.27 0.8 2.2 PS9317L2 lead bending type (Gull-wing) for long creepage distance (surface mount) 10.2 1.27 0.8 2.2 Data Sheet PN10690EJ04V0DS 11 PS9317L,PS9317L2 NOTES ON HANDLING 1. Recommended soldering conditions (1) Infrared reflow soldering * Peak reflow temperature 260C or below (package surface temperature) * Time of peak reflow temperature 10 seconds or less * Time of temperature higher than 220C 60 seconds or less * Time to preheat temperature from 120 to 180C 12030 s * Number of reflows Three * Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) Recommended Temperature Profile of Infrared Reflow Package Surface Temperature T (C) <R> (heating) to 10 s 260C MAX. 220C to 60 s 180C 120C 12030 s (preheating) Time (s) (2) Wave soldering * Temperature 260C or below (molten solder temperature) * Time 10 seconds or less * Preheating conditions 120C or below (package surface temperature) * Number of times One (Allowed to be dipped in solder including plastic mold portion.) * Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) (3) Soldering by soldering iron * Peak temperature (lead part temperature) 350C or below * Time (each pins) 3 seconds or less * Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) (a) Soldering of leads should be made at the point 1.5 to 2.0 mm from the root of the lead. (b) Please be sure that the temperature of the package would not be heated over 100C. 12 Data Sheet PN10690EJ04V0DS PS9317L,PS9317L2 (4) Cautions * Fluxes Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent. 2. Cautions regarding noise Be aware that when voltage is applied suddenly between the photocoupler's input and output or between collector-emitters at startup, the output side may enter the on state, even if the voltage is within the absolute maximum ratings. Data Sheet PN10690EJ04V0DS 13 PS9317L,PS9317L2 <R> SPECIFICATION OF VDE MARKS LICENSE DOCUMENT Parameter Symbol Climatic test class (IEC 60068-1/DIN EN 60068-1) Spec. Unit 40/85/21 Dielectric strength maximum operating isolation voltage Test voltage (partial discharge test, procedure a for type test and random test) UIORM 1 130 Vpeak Upr 1 695 Vpeak Upr 2 119 Vpeak UTR 8 000 Vpeak Upr = 1.5 x UIORM, Pd < 5 pC Test voltage (partial discharge test, procedure b for all devices) Upr = 1.875 x UIORM, Pd < 5 pC Highest permissible overvoltage Degree of pollution (DIN EN 60664-1 VDE0110 Part 1) Comparative tracking index (IEC 60112/DIN EN 60112 (VDE 0303 Part 11)) 2 CTI Material group (DIN EN 60664-1 VDE0110 Part 1) 175 III a Storage temperature range Tstg -55 to +125 C Operating temperature range TA -40 to +85 C VIO = 500 V dc at TA = 25C Ris MIN. 10 12 VIO = 500 V dc at TA MAX. at least 100C Ris MIN. 10 11 Package temperature Tsi 175 C Current (input current IF, Psi = 0) Isi 400 mA Power (output or total power dissipation) Psi 700 mW Ris MIN. 10 Isolation resistance, minimum value Safety maximum ratings (maximum permissible in case of fault, see thermal derating curve) Isolation resistance VIO = 500 V dc at TA = Tsi 14 Data Sheet PN10690EJ04V0DS 9 PS9317L,PS9317L2 * The information in this document is current as of June, 2009. The information is subject to change without notice. For actual design-in, refer to the latest publications of NEC Electronics data sheets, etc., for the most up-to-date specifications of NEC Electronics products. Not all products and/or types are available in every country. Please check with an NEC Electronics sales representative for availability and additional information. * No part of this document may be copied or reproduced in any form or by any means without the prior written consent of NEC Electronics. NEC Electronics assumes no responsibility for any errors that may appear in this document. * NEC Electronics does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from the use of NEC Electronics products listed in this document or any other liability arising from the use of such products. No license, express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of NEC Electronics or others. * Descriptions of circuits, software and other related information in this document are provided for illustrative purposes in semiconductor product operation and application examples. The incorporation of these circuits, software and information in the design of a customer's equipment shall be done under the full responsibility of the customer. NEC Electronics assumes no responsibility for any losses incurred by customers or third parties arising from the use of these circuits, software and information. * While NEC Electronics endeavors to enhance the quality and safety of NEC Electronics products, customers agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. In addition, NEC Electronics products are not taken measures to prevent radioactive rays in the product design. When customers use NEC Electronics products with their products, customers shall, on their own responsibility, incorporate sufficient safety measures such as redundancy, fire-containment and anti-failure features to their products in order to avoid risks of the damages to property (including public or social property) or injury (including death) to persons, as the result of defects of NEC Electronics products. * NEC Electronics products are classified into the following three quality grades: "Standard", "Special" and "Specific". The "Specific" quality grade applies only to NEC Electronics products developed based on a customerdesignated "quality assurance program" for a specific application. The recommended applications of an NEC Electronics product depend on its quality grade, as indicated below. Customers must check the quality grade of each NEC Electronics product before using it in a particular application. "Standard": Computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots. "Special": Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support). "Specific": Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems and medical equipment for life support, etc. The quality grade of NEC Electronics products is "Standard" unless otherwise expressly specified in NEC Electronics data sheets or data books, etc. If customers wish to use NEC Electronics products in applications not intended by NEC Electronics, they must contact an NEC Electronics sales representative in advance to determine NEC Electronics' willingness to support a given application. (Note) (1) "NEC Electronics" as used in this statement means NEC Electronics Corporation and also includes its majority-owned subsidiaries. (2) "NEC Electronics products" means any product developed or manufactured by or for NEC Electronics (as defined above). M8E0904E Data Sheet PN10690EJ04V0DS 15 PS9317L,PS9317L2 Caution GaAs Products This product uses gallium arsenide (GaAs). GaAs vapor and powder are hazardous to human health if inhaled or ingested, so please observe the following points. * Follow related laws and ordinances when disposing of the product. If there are no applicable laws and/or ordinances, dispose of the product as recommended below. 1. Commission a disposal company able to (with a license to) collect, transport and dispose of materials that contain arsenic and other such industrial waste materials. 2. Exclude the product from general industrial waste and household garbage, and ensure that the product is controlled (as industrial waste subject to special control) up until final disposal. * Do not burn, destroy, cut, crush, or chemically dissolve the product. * Do not lick the product or i any way allow it to enter the mouth. To our customers, Old Company Name in Catalogs and Other Documents On April 1st, 2010, NEC Electronics Corporation merged with Renesas Technology Corporation, and Renesas Electronics Corporation took over all the business of both companies. Therefore, although the old company name remains in this document, it is a valid Renesas Electronics document. We appreciate your understanding. Renesas Electronics website: http://www.renesas.com April 1st, 2010 Renesas Electronics Corporation Issued by: Renesas Electronics Corporation (http://www.renesas.com) Send any inquiries to http://www.renesas.com/inquiry. Notice 1. 2. 3. 4. 5. 6. 7. All information included in this document is current as of the date this document is issued. Such information, however, is subject to change without any prior notice. Before purchasing or using any Renesas Electronics products listed herein, please confirm the latest product information with a Renesas Electronics sales office. Also, please pay regular and careful attention to additional and different information to be disclosed by Renesas Electronics such as that disclosed through our website. Renesas Electronics does not assume any liability for infringement of patents, copyrights, or other intellectual property rights of third parties by or arising from the use of Renesas Electronics products or technical information described in this document. No license, express, implied or otherwise, is granted hereby under any patents, copyrights or other intellectual property rights of Renesas Electronics or others. You should not alter, modify, copy, or otherwise misappropriate any Renesas Electronics product, whether in whole or in part. Descriptions of circuits, software and other related information in this document are provided only to illustrate the operation of semiconductor products and application examples. You are fully responsible for the incorporation of these circuits, software, and information in the design of your equipment. Renesas Electronics assumes no responsibility for any losses incurred by you or third parties arising from the use of these circuits, software, or information. When exporting the products or technology described in this document, you should comply with the applicable export control laws and regulations and follow the procedures required by such laws and regulations. You should not use Renesas Electronics products or the technology described in this document for any purpose relating to military applications or use by the military, including but not limited to the development of weapons of mass destruction. Renesas Electronics products and technology may not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any applicable domestic or foreign laws or regulations. Renesas Electronics has used reasonable care in preparing the information included in this document, but Renesas Electronics does not warrant that such information is error free. Renesas Electronics assumes no liability whatsoever for any damages incurred by you resulting from errors in or omissions from the information included herein. Renesas Electronics products are classified according to the following three quality grades: "Standard", "High Quality", and "Specific". The recommended applications for each Renesas Electronics product depends on the product's quality grade, as indicated below. You must check the quality grade of each Renesas Electronics product before using it in a particular application. You may not use any Renesas Electronics product for any application categorized as "Specific" without the prior written consent of Renesas Electronics. Further, you may not use any Renesas Electronics product for any application for which it is not intended without the prior written consent of Renesas Electronics. Renesas Electronics shall not be in any way liable for any damages or losses incurred by you or third parties arising from the use of any Renesas Electronics product for an application categorized as "Specific" or for which the product is not intended where you have failed to obtain the prior written consent of Renesas Electronics. The quality grade of each Renesas Electronics product is "Standard" unless otherwise expressly specified in a Renesas Electronics data sheets or data books, etc. "Standard": 8. 9. 10. 11. 12. Computers; office equipment; communications equipment; test and measurement equipment; audio and visual equipment; home electronic appliances; machine tools; personal electronic equipment; and industrial robots. "High Quality": Transportation equipment (automobiles, trains, ships, etc.); traffic control systems; anti-disaster systems; anticrime systems; safety equipment; and medical equipment not specifically designed for life support. "Specific": Aircraft; aerospace equipment; submersible repeaters; nuclear reactor control systems; medical equipment or systems for life support (e.g. artificial life support devices or systems), surgical implantations, or healthcare intervention (e.g. excision, etc.), and any other applications or purposes that pose a direct threat to human life. You should use the Renesas Electronics products described in this document within the range specified by Renesas Electronics, especially with respect to the maximum rating, operating supply voltage range, movement power voltage range, heat radiation characteristics, installation and other product characteristics. Renesas Electronics shall have no liability for malfunctions or damages arising out of the use of Renesas Electronics products beyond such specified ranges. Although Renesas Electronics endeavors to improve the quality and reliability of its products, semiconductor products have specific characteristics such as the occurrence of failure at a certain rate and malfunctions under certain use conditions. Further, Renesas Electronics products are not subject to radiation resistance design. Please be sure to implement safety measures to guard them against the possibility of physical injury, and injury or damage caused by fire in the event of the failure of a Renesas Electronics product, such as safety design for hardware and software including but not limited to redundancy, fire control and malfunction prevention, appropriate treatment for aging degradation or any other appropriate measures. Because the evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final products or system manufactured by you. Please contact a Renesas Electronics sales office for details as to environmental matters such as the environmental compatibility of each Renesas Electronics product. Please use Renesas Electronics products in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS Directive. Renesas Electronics assumes no liability for damages or losses occurring as a result of your noncompliance with applicable laws and regulations. This document may not be reproduced or duplicated, in any form, in whole or in part, without prior written consent of Renesas Electronics. Please contact a Renesas Electronics sales office if you have any questions regarding the information contained in this document or Renesas Electronics products, or if you have any other inquiries. (Note 1) "Renesas Electronics" as used in this document means Renesas Electronics Corporation and also includes its majorityowned subsidiaries. (Note 2) "Renesas Electronics product(s)" means any product developed or manufactured by or for Renesas Electronics.