MASWSS0180SMB - M/A-Com Technology Solutions

GaAs SPDT Terminated Switch

DC - 2.5 GHz

Rev. V2

MASWSS0180

M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.

Visit www.macom.com for additional data sheets and product information.

For further information and support please visit:

https://www.macom.com/support

Features

 Very Low Power Consumption

 High Isolation: 30 dB up to 2 GHz

 Very High Intercept Point: 46 dBm IP3

 Nanosecond Switching Speed

 Temperature Range: -40°C to +85°C

 Lead-Free SOIC-8 Package

 100% Matte Tin Plating over Copper

 Halogen-Free “Green” Mold Compound

 260°C Reflow Compatible

 RoHS* Compliant Version of SW-338

Description

M/A-COM’s MASWSS0180 is a GaAs MMIC SPDT

terminated switch in a lead-free SOIC 8-lead surface

mount plastic package. The MASWSS0180 is ideally

suited for use where very low power consumption is

required.

Typical applications include transmit/receive switch-

ing, switch matrices, and filter banks in systems

such as radio and cellular equipment, PCM, GPS,

fiber optic modules, and other battery powered radio

equipment.

The MASWSS0180 is fabricated with a monolithic

GaAs MMIC using a mature 1-micron process. The

process features full chip passivation for increased

performance and reliability.

Pin Configuration

Pin No. Function Pin No. Function

1 V2 5 RF Port 1

2 RF Common 6 Ground

3 V1 7 Ground

4 Ground 8 RF Port 2

Part Number Package

MASWSS0180 Bulk Packaging

MASWSS0180TR 1000 piece reel

MASWSS0180SMB Sample Test Board

Absolute Maximum Ratings 3,4

3. Exceeding any one or combination of these limits may cause

permanent damage to this device.

4. M/A-COM does not recommend sustained operation near

these survivability limits.

Parameter Absolute Maximum

Input Power

0.05 GHz

0.5 - 2.0 GHz

+27 dBm

+34 dBm

Control Voltage -8.5 V < VC < + 5 V

Operating Temperature -40°C to +85°C

Storage Temperature -65°C to +150°C

Functional Schematic

Pin 1

RFC

GND

RF1

RF2

* Restrictions on Hazardous Substances, European Union Directive 2002/95/EC.

Ordering Information 1,2

1. Reference Application Note M513 for reel size information.

2. All sample boards include 5 loose parts.

GaAs SPDT Terminated Switch

DC - 2.5 GHz

Rev. V2

MASWSS0180

M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.

Visit www.macom.com for additional data sheets and product information.

For further information and support please visit:

https://www.macom.com/support

Parameter Test Conditions Units Min. Typ.

Max.

Insertion Loss

DC - 0.5 GHz

0.5 - 1.0 GHz

1.0 - 2.0 GHz

—

0.55

0.60

0.65

—

0.7

—

Isolation

DC - 0.5 GHz

0.5 - 1.0 GHz

1.0 - 2.0 GHz

—

VSWR On/Off DC - 2.0 GHz Ratio — 1.1:1 —

Trise, Tfall 10% to 90% RF, 90% to 10 % RF nS — 10 —

Ton, Toff 50% Control to 90% RF, 50% Control to 10% RF nS — 20 —

Transients In-Band mV — 25 —

1 dB Compression Point

Input Power

50 MHz @ 2.9V

1.0 GHz @ 2.9V

50 MHz @ 5.0V

1.0 GHz @ 5.0V

dBm

—

2nd Order Intercept

Measured Relative to Input Power

(for two-tone input power up to +5 dBm)

50 MHz @ 2.9V

1.0 GHz @ 2.9V

50 MHz @ 5.0V

1.0 GHz @ 5.0V

dBm

—

3rd Order Intercept

Measured Relative to Input Power

(for two-tone input power up to +5 dBm)

50 MHz @ 2.9V

1.0 GHz @ 2.9V

50 MHz @ 5.0V

1.0 GHz @ 5.0V

dBm

—

Control Current VC = 2.9 V µA — 15 35

5. Typical values represent performance at middle of frequency range noted.

6. 0 = 0 V ± 0.2 V, 1 = -2.9 V to -5.0 V

Electrical Specifications: TA = 25°C, VC = 0 V / -2.9 V, Z0 = 50 Ω

Truth Table 6

Control Inputs Condition of Switch

RF Common to Each RF Port

V1 V2 RFC-RF1 RFC-RF2

1 0 ON OFF

0 1 OFF ON

Handling Procedures

Please observe the following precautions to avoid

damage:

Static Sensitivity

Gallium Arsenide Integrated Circuits are sensitive

to electrostatic discharge (ESD) and can be

damaged by static electricity. Proper ESD control

techniques should be used when handling these

devices.

GaAs SPDT Terminated Switch

DC - 2.5 GHz

Rev. V2

MASWSS0180

M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.

Visit www.macom.com for additional data sheets and product information.

For further information and support please visit:

https://www.macom.com/support

Lead-Free SOIC-8†

† Reference Application Note M538 for lead-free solder reflow recommendations.

Meets JEDEC moisture sensitivity level 1 requirements.

Typical Performance Curves

Isolation

Insertion Loss

VSWR

0.0

0.2

0.4

0.6

0.8

1.0

0.0 0.5 1.0 1.5 2.0 2.5

+25°C

-40°C

+85°C

Frequency (GHz)

100

0.0 0.5 1.0 1.5 2.0 2.5

+25°C

-40°C

+85°C

Frequency (GHz)

1.0

1.1

1.2

1.3

1.4

1.5

0.0 0.5 1.0 1.5 2.0 2.5

+25°C

-40°C

+85°C

Frequency (GHz)

GaAs SPDT Terminated Switch

DC - 2.5 GHz

Rev. V2

MASWSS0180

M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.

Visit www.macom.com for additional data sheets and product information.

For further information and support please visit:

https://www.macom.com/support

Information in this document is provided in connection with M/A-COM Technology Solutions Inc ("MACOM")

products. These materials are provided by MACOM as a service to its customers and may be used for

informational purposes only. Except as provided in MACOM's Terms and Conditions of Sale for such products or

in any separate agreement related to this document, MACOM assumes no liability whatsoever. MACOM

assumes no responsibility for errors or omissions in these materials. MACOM may make changes to

specifications and product descriptions at any time, without notice. MACOM makes no commitment to update

the information and shall have no responsibility whatsoever for conflicts or incompatibilities arising from future

changes to its specifications and product descriptions. No license, express or implied, by estoppels or otherwise,

to any intellectual property rights is granted by this document.

THESE MATERIALS ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR

IMPLIED, RELATING TO SALE AND/OR USE OF MACOM PRODUCTS INCLUDING LIABILITY OR

WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, CONSEQUENTIAL OR

INCIDENTAL DAMAGES, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR

OTHER INTELLECTUAL PROPERTY RIGHT. MACOM FURTHER DOES NOT WARRANT THE ACCURACY

OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN

THESE MATERIALS. MACOM SHALL NOT BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL, OR

CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS,

WHICH MAY RESULT FROM THE USE OF THESE MATERIALS.

MACOM products are not intended for use in medical, lifesaving or life sustaining applications. MACOM

customers using or selling MACOM products for use in such applications do so at their own risk and agree to

fully indemnify MACOM for any damages resulting from such improper use or sale.