PX Series Crystal Clock Oscillator (XO) Legacy SDS383 Series 7.0 x 5.0mm PX 3.3V LVDS Low Jitter XO Package: Recommended Land Pattern: 7.0 x 5.0mm Ceramic SMD Product Features * 38.88 to 162 MHz Frequency Range * <1 ps RMS jitter with non-PLL design Pin Functions: Pin Function 1 OE or NC * IBIS models available 2 OE or NC * Pb-free & RoHS/Green compliant 3 Ground 4 Q Output Product Description 5 Q Output The PX Series 3.3V crystal clock oscillator achieves superb jitter and stability over a broad range of operating conditions and frequencies. The output clock signal, generated internally with a non-PLL oscillator design, is compatible with LVDS logic levels. The device, available on tape and reel, is contained in a 7x5mm surface-mount ceramic package. 6 VCC * Designed for standard reflow & washing techniques Part Ordering Information: PX XXX YYYY A: ProductFamily B: XXX = FrequencyCode C: YYYY = SpecificationCode Applications Following the above format, Saronix-eCera part numbers will be assigned upon confirmation of exact customer requirements. The PX Series is ideal for high-speed applications requiring low jitter, including: * 1/10 Gigabit Ethernet Legacy Ordering Information - For Reference Only: * 2/4/10G FibreChannel S DS383 3 B - 156.2500 (T) * Serial Attached SCSI (SAS) * Server & Storage platforms Product Series * SONET/SDH linecards Output Enable/Disable Function 0 = N/C pin 1, and pin 2 3 = OE pin 1, N/C pin 2 4 = N/C pin 1, OE pin 2 * Passive Optical Network (PON) devices * HD Video Systems SaRonix-eCeraTM is a Pericom(R) Semiconductor company Packaging (T) = Tape & Reel full reel increments Blank = Bulk packaged SaRonix * US: +1-408-435-0800 TW: +886-3-4518888 Output Frequency (MHz) Frequency Stability A = 25 ppm (0 to +70C) B = 50 ppm (0 to +70C) E = 50 ppm (-40 to +85C) * All specifications are subject to change without notice. www.saronix-ecera.com PX 3.3V REV2008_DEC04_01.5 1 3.3V LVDS Low Jitter XO PX PX Series Crystal Clock Oscillator (XO) Legacy SDS383 Series | 7.0 x 5.0mm Electrical Performance Parameter Min. Output Frequency 38.88 Supply Voltage 2.97 Supply Current, Enabled Typ. Max. Units 162 MHz 3.3 3.63 V 35 Supply Current, Disabled Frequency Stability Operating Temperature Range Output Logic 0, VOL 20 to 50 ppm +70 -40 +85 As specified See Note 1 below Commercial (standard) C 1.1 Output Logic 1, VOH Industrial (standard) V 1.43 Output Load mA mA -20 0.9 Output Amplitude Differential 47 0.03 Notes 500 1.6 V 900 mV 100 +5pF across the outputs Duty Cycle 45 Rise and Fall Time 500 Jitter, Phase 0.5 Jitter, Total output requires termination 55 % measured 50% of waveform 850 ps measured 20/80% of waveform 1 ps RMS (1-) 25 ps pk-pk 12kHz to 20MHz frequency band 100,000 random periods Notes: 1. Stability includes all combinations of operating temperature, load changes, rated input (supply) voltage changes, initial calibration tolerance (25C), aging (5 year at 40C average effective ambient temperature), shock and vibration. 2. For specifications othere than those listed, please contact sales. Output Enable / Disable Function Parameter Min. Input Voltage (pin OE), Output Enable Typ. Max. Units V or open 0.3 V Outpus disabled to Hi-Z 0.7 Input Voltage (pin OE), Output Disable (low power standby) Internal Pullup Resistance 50 Notes k Output Disable Delay 200 ns Output Enable Delay 10 ms Absolute Maximum Ratings Parameter Storage Temperature Min. Typ. -55 SaRonix-eCeraTM is a Pericom(R) Semiconductor company * Max. Units +125 C US: +1-408-435-0800 TW: +886-3-4518888 Notes * All specifications are subject to change without notice. www.saronix-ecera.com PX 3.3V REV2008_DEC04_01.5 2 3.3V LVDS Low Jitter XO PX PX Series Crystal Clock Oscillator (XO) Legacy SDS383 Series | 7.0 x 5.0mm Test Circuit Test Point (Termination internal to scope) +2.1V 0.1F 0.01F 6 5 4 1 2 3 507 507 -1.2V 0.1F 0.01F Output Enable/Disable Function (OE function present on specified pin) Reflow Soldering Profile As per IPC/JEDEC J-STD-020C Temperature - C 1 to 3C/sec max 260 Peak 260C for 10 sec max 1 to 3C/sec 217 60 to 90 sec Time 4 to 6 minutes max Reliability Test Ratings This product is rated to meet the following test conditions: Type Parameter Test Condition Mechanical Shock MIL-STD-883, Method 2002, Condition B Mechanical Solderability JESD22-B102-D Method 2 (Preconditioning E) Mechanical Terminal strength MIL-STD-883, Method 2004, Condition D Mechanical Gross leak MIL-STD-883, Method 1014, Condition C Mechanical Fine leak MIL-STD-883, Method 1014, Condition A2 (R1 = 2x10 -8 atm cc/s) Mechanical Solvent resistance MIL-STD-202, Method 215 Environmental Thermal shock MIL-STD-883, Method 1011, Condition A Environmental Moisture resistance MIL-STD-883, Method 1004 Environmental Vibration MIL-STD-883, Method 2007, Condition A Environmental Resistance to soldering heat J-STD-020C Table 5-2 Pb-free devices (2 cycles max) SaRonix-eCeraTM is a Pericom(R) Semiconductor company * US: +1-408-435-0800 TW: +886-3-4518888 * All specifications are subject to change without notice. www.saronix-ecera.com PX 3.3V REV2008_DEC04_01.5 3 3.3V LVDS Low Jitter XO PX PX Series Crystal Clock Oscillator (XO) Legacy SDS383 Series | 7.0 x 5.0mm Output Waveform tf tr VOH 80% 50% 20% VOL tA tB Duty cycle = 100% x (tA) / (tA + tB) OUT Vpp 0V (Differential) OUT SaRonix-eCeraTM is a Pericom(R) Semiconductor company * US: +1-408-435-0800 TW: +886-3-4518888 * All specifications are subject to change without notice. www.saronix-ecera.com PX 3.3V REV2008_DEC04_01.5 4