RF
123
RF Components
LOW NOISE BLOCKDOWN CONVERTER
■Europe: LNB for Broadcasting Satellite
◆Features
(1) Wide band type receiving all broadcasting channels (analog & digital) of Europe. [Universal LNB]
(2) Originally developed feed-horn waveguide makes the wide-band, low-noise characteristics possible.
(3) One of the industry’s most compact and lightweight package
(4) Low consumption current design for energy saving [80 mA (TYP.): BS1R8EL100A]
◆Specifications
■U.S.A.: LNB for FSS Broadcast/(Others: LNB for Communication)
◆Specifications
Destination Europe, Astra/Eutelsat Satellite etc.
Receiving polarization Horizontal/Vertical polarization
Model No. <Type> BS1R6EL400A <4 output> BS1R5EL200A <2 output> BS1R8EL100A <1 output>
Input frequency (GHz) 10.7 to 11.7 [Low band], 11.7 to 12.75 [High band]
Output frequency (MHz) 950 to 1 950 [Low band], 1 100 to 2 150 [High band]
Local oscillation frequency (GHz) 9.75 [Low band], 10.6 [High band]
NF (dB) 1.3 (TYP.) [Low band],
1.1 (TYP.) [High band] 0.7 (TYP.) 0.8 (TYP.)
Conversion gain (dB) 46 (MIN.)
Phase noise –50 dBc/Hz @1 kHz (MAX.) –55 dBc/Hz @1 kHz (TYP.)
Cross-polar discrimination (dB) 25 (TYP.)/20 (MIN.)
Supply voltage (V DC)
(Polarization switching voltage)
Ver tical polarization 11.5 to 14.0 (0/22 kHz)
Horizontal polarization 16.0 to 19.0 (0/22 kHz)
Power consumption (mA) 290 (MAX.) 190 (TYP.)/250 (MAX.) 80 (TYP.)/120 (MAX.)
Waveguide Feed-horn (F/D = 0.6)
Output impedance (Ω) 75
Output connector (F-type) 4-output
(H/V, High and low switching) 2-output
(H/V, High and low switching) 1-output
(H/V, High and low switching)
Outline dimensions (mm) 63.4 × 138.2 × 152.4 61.5 × 135.6 × 129.5 107.3 × 60.0 × 60.0
Weight (g) Approx. 460 Approx. 430 Approx. 145
BS1R6EL400A BS1R5EL200A BS1R8EL100A
Receiving system U.S.A.: FSS, Japan and others: for communication
Receiving polarization Horizontal/vertical polarization
Model No. BS1C1UR100A
Input frequency (GHz) 11.7 to 12.2
Output frequency (MHz) 950 to 1 450
Local oscillation frequency (GHz) 10.75
NF (dB) 0.7 (TYP.)/0.9 (MAX.)
Conversion gain (dB) 50 to 62
Phase noise -60 dBc/Hz @1 kHz (TYP.)
Cross-polar discrimination (dB) —
Supply voltage (V DC) 12 to 24
Power consumption (mA) 120 (TYP.)/150 (MAX.)
Waveguide WR-75
Output impedance (Ω)75
Output connector (F-type) 1-output
Outline dimensions (mm) 48.6 × 96.3 × 45.5
BS1C1UR100A
Weight (g) Approx. 100
Notice
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment
using any SHARP devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets
before using any SHARP device.
RF
124
LOW NOISE BLOCKDOWN CONVERTER
■Japan/Asia/Australia: LNBs for CS Digital Satellite Broadcast
◆Specifications
■Japan: LNBs for BS/CS 110° Satellite Broadcast
◆Features
(1) Can receive 2 satellite broadcasts of 110° BS/CS digital
[Employs wide-band (1 GHz) circular’ linear polarization conversion technology (septum waveguide structure)]
(2) Outstanding noise figure (NF) characteristics enabling compact design of antenna diameter. [NF: 0.45 dB (TYP.)/BS1F6JU300A]
(3) Low current consumption design for improved energy saving. [80 mA (TYP.)]
◆Standard Specifications
Destination Japan, Asia, Australia, CS Satellite
Receiving polarization Horizontal/Vertical
polarization
Model No. <Type> BS1R5AQ100A
Input frequency (GHz) 12.25 to 12.75
Output frequency (MHz) 950 to 1 450
Local oscillation frequency (GHz) 11.3
NF (dB) 0.6 (TYP.) / 1.0 (MAX.)
Conversion gain (dB) 50 (MIN.)
Phase noise –75 dBc/Hz @1 kHz (TYP.)
Cross-polar discrimination (dB) 25 (TYP.)/20 (MIN.)
Supply voltage (V DC)
(Polarization switching voltage)
Ver tical polarization 11.5 to 14.0
Horizontal polarization 16.0 to 19.0
Power consumption (mA) 80 (TYP.)120 (MAX.)
Waveguide Feed-horn (F/D = 0.6)
Output impedance (Ω)75
Output connector (F-type) 1-output (H/V switching)
Outline dimensions (mm) 140 × 60 × 60 BS1R5AQ100A
Weight (g) Approx. 180
Destination Japan BS/CS 110° Satellite
Receiving polarization Right circular polarization Right/Left circular
polarization
Model No. BS1F6JU300A BS1F6JP300A BS1F6JP100A
Input frequency (GHz) 11.71023 to 12.751
Output frequency (MHz) 1 032.23 to 2 073
Local oscillation frequency (GHz) 10.678
NF (dB) 0.45 (TYP.) /
0.6 (MAX.) 0.7 (TYP.) / 1.1 (MAX.)
Conversion gain (dB) 48 to 60
Phase noise -65 dBc/Hz @1 kHz (TYP.)
Cross-polar discrimination (dB) 25 (TYP.)/20 (MIN.)
Supply voltage (V DC)
(Polarization switching voltage)
Right circular polarization
9.5 to 18.0 13.5 to 16.5
Left circular polarization — 9.5 to 12.0
Power consumption (mA) 80 (TYP.)/110 (MAX.)
Waveguide Feed-horn (F/D=0.5)
Output impedance (Ω)75
Output connector (F-type) 1-output 1-output
(R/L switching) BS1F6JP300A
Outline dimensions (mm) 96 × 53.07 × 71
Weight (g) Approx. 130 (not including outer cabinet) * Outer cabinet is made upon request.
Notice
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment
using any SHARP devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets
before using any SHARP device.
125
RF Components
DIGITAL DBS FRONT-END UNITS
■Digital DBS Front-End Units
BS front-end unit for digital broadcasting features high quality of signal transmission and improved elimination ability of various
kinds of rejection thanks to using Sharp’s original ICs.
◆Features
(1) Equipped with a direct conversion IC developed by Sharp. Reliability is improved by reducing power consumption and component
counts.
(2) Compact and thin design enabling installation on a personal computer PCI card. [Thickness: 12.9 mm (MAX.)]
(3) Wide-band reception design also covering CS broadcast band. [Reception frequency: 950 to 2 150 MHz]
(4) Wide product line-up of LINK integrated types for contributing to set development time reduction. [Compatible with QPSK/8PSK
demodulation]
(5) User support tools can be provided. [Sample/evaluation boards and software are available.]
◆Standard Specifications
❇Contact SHARP for custom design product.
*1 I2C-bus is a trademark of Philips Corporation.
*2 Terminal supply voltage is not required.
Destination Europe/U.S.A./Japan
Input type 1-input 1-input,
1-loop through output 1-input
Model No. BS2S7VZ0302A BS2S7HZ0302A BS2S7HZ6306
Input frequency (MHz) 950 to 2 150
Input signal level (dBm) –65 to –25
The 1st intermediate frequency
(MHz) Zero-IF (Direct conversion)
Base band frequency bandwidth 10 to 30, 2.0 MHz
step (BB LPF)
RF input local leak (dBm) –63 (MAX.)
PLL phase noise
(dBc/Hz)
10 kHz offset –75 (TYP.) BS2S7VZ0302A
1 kHz offset –70 (TYP.)
Output type I/Q
Channel selection system PLL (I
2
C-bus)*
1
Noise figure (dB) 12 (MAX.)
Tuning voltage (V DC) (Not required)*
2
Supply voltage (V DC) 3.3
LNB power supply DC 25 V, 400 mA (MAX.)
Input impedance (Ω)75
Outline dimensions (mm) 29.6 × 37.9 × 11.0 30.6 × 25.0 × 11.7 BS2S7HZ6306
D
Notice
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment
using any SHARP devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets
before using any SHARP device.
RF
126
DIGITAL DBS FRONT-END UNITS
■Digital DBS Front-End Units (QPSK Demodulator Circuit Built-in Type)
◆Specifications <QPSK demodulator circuit built-in type>
❇Contact SHARP for custom design product.
*1 I2C-bus is a trademark of Philips Corporation.
*2 Terminal supply voltage is not required.
■Digital DBS Front-End Units (8 PSK Demodulator Circuit Built-in Type)
◆Specifications <8 PSK demodulator circuit built-in type>
*1 I2C-bus is a trademark of Philips Corporation.
*2 Terminal supply voltage is not required.
Destination Europe/U.S.A./Japan
Input type 1-input, 1-loop through output 1-input,
1-loop through output
(super compact type)
Model No. BS2F7VZ0194A BS2F7VZ0724 BS2F7VZ7294
Input frequency (MHz) 950 to 2 150
Input signal level (dB m) –65 to –25
The 1st intermediate frequency (MHz) Zero-IF (Direct conversion)
Base band frequency bandwidth (MHz) 10 to 30, 2.0 MHz step (BB LPF)
RF input local leak (dB m) –63 (MAX.)
Output type 8-bit transport
Symbol rate (M baud) 45 (MAX.)
BER (Viterbi output) Eb/No = 5.5 dB (Max.) [PR = 3/4, BER = 2 x 10
–4
]
Channel selection system PLL (I
2
C-bus)*
1
Noise figure (dB) 12 (MAX.)
Tuning voltage (V DC) (Not required)*
2
Supply voltage (V DC) 3.3, 2.5 3.3, 1.8 3.3, 2.5
LNB power supply 25 V DC, 400 mA (MAX.)
Input impedance (Ω)75 BS2F7VZ0194A
Outline dimensions (mm) 55.1 × 37.9 × 11.0 57.5 × 29.6 × 13.2
Destination Japan
Input type/Features 1-input 1-input,
1-loop through output
Model No. BS2F7HZ6460 BS2F7VZ0460
Input frequency (MHz) 950 to 2 150
Input signal level (dB m) –65 to –25
The 1st intermediate frequency (MHz) Zero-IF (Direct conversion)
Base band frequency bandwidth (MHz) 22 (BB LPF)
variable type 22.5 (BB LPF)
variable type
RF input local leak (dB m) –63 (MAX.) BS2F7HZ6460
Output type Serial
transport output Parallel/serial
transport output
Symbol rate (M baud) 28.86
Channel selection system PLL (I
2
C-bus)*
1
Noise figure (dB) 8 (TYP.)
Tuning voltage (V DC) (Not required)*
2
Supply voltage (V DC) 3.3, 1.5
LNB power supply 25 V DC, 400 mA (MAX.)
Input impedance (Ω)75 BS2F7VZ0460
Outline dimensions (mm) 65.8 × 26.0 × 13.7 (MAX.) 55.1 × 37.9 × 11.0
Notice
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment
using any SHARP devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets
before using any SHARP device.
127
RF Components
COMBINATION FRONT-END FOR DIGITAL TERRESTRIAL AND DIGITAL SATELLITE BROADCASTING
■Combination Front-End for Digital Terrestrial and Digital Satellite Broadcasting
◆Features
(1) Enables simultaneous reception of digital terrestrial and digital satellite broadcasting.
(2) Contributes to making LCD TVs, etc. thinner.
(3) Combination reception module for terrestrial digital:
A tuner circuit, a demodulator, an MPEG decoder and a video encoder combined in a single module.
◆Standard Specifications
*1 An RF front-end unit is additionally required to receive analog broadcasting.
*2 It conforms to the ARIB standard.
*3 I2C-bus is a trademark of Philips Corporation.
*4 DC 5V type of supply voltage is also available.
Destination Japan
Model No. VA1W1JF9003
RF circuit system Digital terrestrial Digital DBS
Single conversion type Direct conversion type
Input frequency (MHz)*
1
VHF, UHF, CATV
VHF Low: 93 to 159
VHF High: 167 to 351
UHF: 357 to 767
950 to 2 150
Input signal level*
2
(dBm) –75 to –20 –65 to –25
Output type Direct IF [Balance]
(Output frequency: 57MHz) I/Q
IF bandwidth (MHz) 6 –
Base band frequency bandwidth – 10 MHz to 30 MHz,
2.0 MHz step (BB LPF)
Noise figure (dB) 6 (TYP.) 6 (TYP.)
PLL phase noise (dBc/Hz) –90 (TYP.)
at 10kHz offset –80 (TYP.)
at 10kHz offset
Image rejection (dB) 65 (TYP.) – VA1W1JF9003
Channel selection system PLL (I
2
C-bus)*3
Power consumption (W) 1.57 (TYP.)
(When the digital terrestrial and digital satellite broadcasting
are received simultaneously)
Supply voltage (V DC) 5 3.3*4
Outline dimensions (mm) 60.9 × 42.1 × 12.6
Notice
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment
using any SHARP devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets
before using any SHARP device.
RF
128
DIGITAL TERRESTRIAL FRONT-END UNIT
■Front-End Units for ISDB-T/DVB-T
◆Features
(1) Low phase noise characteristics, high elimination of adjacent channel interference.
(2) Transport stream output front-end units with built-in OFDM demodulation IC. [VA1L5JF6013/VA1J5ED5055]
(3) Compact, low power consumption.
(4) Other types are available with various forms of chassis (vertical or horizontal type) and input connectors (F or DIN type), etc.
◆Standard Specifications
*1 An RF front-end unit is additionally required to receive analog broadcasting.
*2 I2C-bus is a trademark of Philips Corporation.
Destination Japan Europe/Asia
Product name ISDB-T front end
(IF output)
ISDB-T front end
(built-in OFDM
demodulation) DVB-T front end (IF output) DVB-T front end
(built-in OFDM
demodulation)
Model No. VA1T1JF2091 VA1L5JF6023 VA1T1ED5065 VA1H1ED5265 VA1K5ED5255
Input frequency (MHz)*
1
VHF, UHF, CATV
VHF Low: 93 to 159
VHF High: 167 to 351
UHF: 357 to 767
VHF: 143.5 to 430
UHF: 430 to 862 VHF: 143.5 to 430
UHF: 430 to 862
Output Direct IF Transport stream
(Built-in OFDM
demodulation) Direct IF Transport stream
(Built-in OFDM
demodulation)
IF bandwidth (MHz) 6 7, 8, selectable
Mode Mode 1, 2, 3 2k, 8k, both compatible
Input sensitivity — –79 dBm (TYP.)
[in mode 3, 64 QAM,
CR = 7/8 (QEF)] —–81 dBm (TYP.)
[at 2 k, 64 QAM,
CR = 2/3 (QEF)]
Noise figure (dB) 6 (TYP.)
Phase noise –90 dBc/Hz (TYP.)
[at 10 kHz offset] –90 dBc/Hz (TYP.)
[at 10 kHz offset]
Image rejection (dB) 65 (TYP.) — 55 (TYP.) —
C/N —
22.3 dB (TYP.)
[at input level: –45 dBm,
in mode 3, 64 QAM,
CR = 7/8 (QEF)]
—
17.2 dB (TYP.)
[at input level: –50 dBm,
64 QAM,
CR = 2/3 (QEF)]
Channel selection/control system PLL (I
2
C-bus)*
2
Power consumption (W) 1.15 1.6 0.75 0.85 1.33
Supply voltage (V DC) 5, 30 1.5, 3.3, 5, 30 5 (DC-DC converter) 5, 3.3, 1.8
(DC-DC converter)
Outline dimensions (mm) 52.0 x 35.9 x 13.4 80.0 x 35.9 x 13.4 52.0 x 35.9 x 13.4 47.7 x 29.6 x 13.2 70.0 x 29.6 x 13.2
VA1T1JF2091 VA1L5JF6023 VA1S1ED5056
(VA1S8ED5056) VA1K5ED5255
Notice
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment
using any SHARP devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets
before using any SHARP device.
129
RF Components
TWO-IN-ONE RF UNIT
★Under development
■Two-In-One RF Units (RF Front-End Unit + PIF Unit)
◆Features
(1) High performance RF front-end unit and PIF unit are integrated in one unit, resulting in a short developing time.
(2) A composite unit structure improves operability during mounting.
(3) Horizontal shaped models for LCD TVs/LCD monitors are available.
(Vertical shaped models are also available.)
◆Specifications
*1 I2C-bus is a trademark of Philips Corporation.
*2 Compatible with RF loop through type.
TV system Japan U.S.A. China
Model No. ★ VT2A5JW250 VT2W5UF250 VT2W5CD551
Receiving channels (ch)
VHF UHF VHF UHF VHF UHF
Air CATV CATV Air Air CATV CATV Air Air CATV CATV Air
1 to 12 C13 to
C52 C53 to
C63 13 to 62 2 to 13 A-5 to
W+11 W+12 to
W+84 14 to 69 1 to 12 1A, Z1 to
Z33 Z34 to
Z38 13 to 57
Band split BL: 1 to 3, C13 to C22
BH: 4 to 12, C23 to C52
BU: 13 to 62, C53 to C63
BL: 2 to 6, A-5 to B
BH: 7 to 13, C to W+11
BU: 14 to 69, W+12 to W+84
BL: 1 to 5, 1A, Z1 to Z4
BH: 6 to 12, Z5 to Z33
BU: 13 to 57, Z34 to Z38
Intermediate frequency (MHz) Video 58.75 45.75 38.0
Audio 54.25 41.25 D/K: 31.5, I: 32.0, B/G: 32.5, M/N: 33.5
Detection system Pseudo synchronization detection system, split-carrier audio receiving system
Te r minals Input/loop-through output:
F-type junction Input: F-type junction Input: DIN type terminal
Input impedance (Ω) 75
RF with loop through*
2
—*
2
—*
2
B voltage (V DC) MB: 5/BT: 31.5 MB: 5/BT: 31 MB: 5/BT: 31
RF
front-end
Noise figure (dB) 9.5 9.5 9.5 9.5 46556766
Type CATV receiver front end
Channel selection system PLL (I
2
C-bus)*1
Image rejection (dB) V
L
: 85, V
H
: 75 75 V
L
: 75, A5 to I: 80,
J to W+84: 60 60 V
L
: 70, V
H
: 70 55
IF rejection (dB) V
L
: 80, V
H
: 95 95 V
L
: 90, V
H
: 100 100 V
L
: 50 to 70, V
H
: 90 90
IF
Video output level (Vp-p) 1.0 1.0 1.0
Video output S/N (dB) 47 48 44
Noise limit sensitivity (dBµ)
at S/N = 30 dB 45 43 42
Audio output level (mVrms) — 290 290
Audio output S/N (dB) — 55 45
Audio frequency
characteristics (at 70 kHz) — –1 (at 80 kHz) –0 (at 10 kHz)
SIF output Possible to SIF output
Outline dimensions (mm) 50.3 × 38.4 × 12.7 60.9 × 41.5 × 15.0
VT2A5JW250 VT2W5UF250
Notice
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment
using any SHARP devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets
before using any SHARP device.
RF
130
ANALOG TERRESTRIAL RF FRONT-END UNIT
■RF Front-End Units
<VT1Y Series>
◆Features
(1) Miniature size achieved using thin profile, low height design in industry standard RF front-end unit (terminal shape and terminal pin
arrays)
(2) Model lineup corresponding to domestic product standards of Europe, China, Japan and the United States.
◆Specifications (Major models of VT1Y series)
(Note) The figures in the table are typical values.
*1 Available IF output equilibrium model
DIN-type junction input type With RF output terminal type
Destination Europe U.S.A. China Japan
Type CS, for frequency
synthesizer
IF output*
1
: No equilibrium
With PLL, for frequency
synthesizer, F-type junction
input
GB, hyper, for frequency
synthesizer With PLL, for frequency
synthesizer With PLL, for frequency syn-
thesizer, with RF output
Model No. VT1Y5ED211 VT1Y5UF201 VT1Y5CD201 VT1Y5JF201 VT1Y5JB201
Receiving channel
(ch)
VHF UHF VHF UHF VHF UHF VHF UHF VHF UHF
Air CATV CATV Air Air CATV CATV Air Air CATV CATV Air Air CATV CATV Air Air CATV CATV Air
2 to 12 X to
S36 S37 to
S41 21 to
C57 2 to 13 A-5 to
W+11
W+12
to
W+84
14 to
69 1 to 12 1A, Z1
to Z33 Z34 to
Z38 13 to
57 1 to 12 C13 to
C52 C53 to
C63 13 to
62 1 to 12 C13 to
C52 C53 to
C63 13 to
62
Band split B
L
: 2 to 4, X to S6
B
H
: 5 to 12, S7 to S36
B
U
: 21 to C57, S37 to S41
BL: 2 to 6, A-5 to B
BH: 7 to 13, C to W+11
BU: 14 to 69, W+12 to W+84
BL: 1 to 5, 1A, Z1 to Z4
BH: 6 to 12, Z5 to Z33
BU: 13 to 57, Z34 to Z38
BL: 1 to 3, C13 to C22
BH: 4 to 12, C23 to C52
BU: 13 to 62, C53 to C63
BL: 1 to 3, C13 to C22
BH: 4 to 12, C23 to C52
BU: 13 to 62, C53 to C63
Intermediate
frequency
(MHz)
Video 38.9 45.75 38.0 58.75
Audio 33.4 41.25 31.5 54.25
B voltage (V DC) +B: 5/BT: 31 +B: 5/BT: 31.5 +B: 5/BT: 31 +B: 5/BT: 31.5
Input impedance (Ω) 75
VSWR 2 2 2 1.5 1.5 1.5 2 2 2 1.5 1.5 1.5 – – –
Noise figure (dB) 5 7 6 5 5 6 5 7 6 4 5 4.5 8 9 8.5
Power gain (dB) 40 38 40 39 39 37 40 38 40 40 37 40 36 33 36
Image rejection (dB) VL: 70
VH: 65 60 VL: 70
VH: 60 60 VL: 70
VH: 65 60 VL: 85
VH: 85 80 VL: 85
VH: 85 80
IF rejection (dB) VL: 70
VH: 90 90 VL: 80
VH: 90 85 VL: 70
VH: 90 90 VL: 85
VH: 85 100 VL: 85
VH: 85 100
Outline dimensions
(mm) 53.0 × 33.6 × 14.3
Notice
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment
using any SHARP devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets
before using any SHARP device.
131
RF Components
ANALOG TERRESTRIAL RF FRONT-END UNIT
■Ultra Compact Front-End Units
<VT2V Series>
◆Features
(1) Compact and thin design suitable for building into a portable unit with LCD monitor. (Circuit area of 11.4 cm3)
(2) Contribute to simplifying developing process and saving space thanks to the built-in VIF/SIF circuit.
◆Specifications
Destination Japan/U.S.A.
Model No. VT2V8UP5510
Receiving channel
VHF UHF CATV FM Radio
JPN: 1 to 12
USA: 2 to 13 JPN: 13 to 62
USA: 14 to 69 JPN: C13 to C63
USA: A-5 to W+84 JPN: 76 to 90 MHz
USA: 88 to 108 MHz
The 1st intermediate
frequency (MHz)
Video 45.75
Audio 41.25
Supply voltage (V DC) 5 single (DC-DC converter)
Power consumption (W) 0.8 (TYP.)
Input impedance (Ω)75
Video S/N (dB) 50 (TYP.)
Audio S/N (dB) 53 (TYP.)
Noise limit sensitivity (dB) 42 (TYP.)
Video frequency characteristics –1.0 dB (TYP.) at 3.58 MHz
Audio frequency characteristics –1.5 dB (TYP.) at 80 kHz VT2V8UP5510
Outline dimensions (mm) 49.9 × 28.0 × 7.7
Notice
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment
using any SHARP devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets
before using any SHARP device.
