AAMOSPEC NPN SILICON POWER DARLINGTON TRANSISTORS ...designed for use in automotive ignition. switching and motor con- trol applications. FEATURES: * Collector-Emitter Sustaining Voltage- Veeorsus) = 300 V (Min) - TIP150 = 350 V (Min) - TIP151 = 400 V (Min) - TIP152 * Collector-Emitter Saturation Voltage Voe;saty = 2-0 V (Max.) @ |, =5.0A * Reverse-Base SOA --300V to 400 Vat7A MAXIMUM RATINGS NPN TIP150 TIP151 TIP152 7 AMPERE DARLINGTON POWER TRANSISTORS 300-400 VOLTS 80 WATTS fv TO-220 Characteristic Symbol | TIP150 | TIP151 | TIP1&62 | Unit Collector-Emitter Voitage Vero 300 350 400 Vv COllector-Base Voltage Vego 300 350 400 V Emitter-Base Voltage Vero 8.0 V Collector Current-Continuous le 7.0 A -Peak lom 10 Base Current ip 1.6 A Total Power Dissipation @T,= 25C Py 80 Ww Derate above 25C 0.64 wre Operating and Storage Junction T .Ts1 C Temperature Range - 65 to +150 THERMAL CHARACTERISTICS Characteristic Symbol Max Unit Thermal Resistance Junction to Case Reje 1.56 SCAN B LaX, r A ft wt ah spe se \ =a FIGURE -1 POWER DERATING P, , POWER DISSIPATION(WATTS) ot 88S SBS oO 2 50 7S 100 125 150 To , TEMPERATURE(C) PIN 1.BASE 2.COLLECTOR 3.EMITTER 4.COLLECTOR(CASE) MILLIMETERS DIM MIN MAX A 14.68 | 15.31 B 9.78 | 10.42 c 5.01 6.52 D 13.06 | 14.62 E 3.57 4.07 F 2.42 3.66 G 1.12 1.36 H 0.72 0.96 | 4.22 4.98 J 1.14 1.38 K 2.20 2.97 L 033 0.55 M 2.48 2.98 Oo 3.70 3.90TIP150, TIP151, TIP152 NPN eee ELECTRICAL CHARACTERISTICS ( T, = 25C unless otherwise noted ) Characteristic Symbol Min Max Unit OFF CHARACTERISTICS Collector - Emitter Breakdown Voltage (1) Vier)ceo V (Ig = 10 mA, I, = 0) TIP150 300 TIP 151 350 TIP152 400 Collector - Base Breakdown Voltage (1) Vipryceo V (I, = 1.0 mA, I, =0) TIP150 300 TIP151 350 TIP152 400 Collector Cutoff Current lcEO uA ( Vog = 300 V, 1, = 0 ) TIP 150 250 ( Veg = 350 V, I, = 0 ) TIP151 250 ( Veg = 400 V, 1, = 0 ) TIP 152 250 Emitter Cutoff Current leso mA ( Veg = 8.0 V,I,= 0 ) 15 ON CHARACTERISTICS (1) DC Current Gain hFE (ig = 2.54, Vog = 5.0V) 150 (1g = 5.0A, Veg = 5.0V) 50 (Ig =7.0A, Vee =5.0V) 15 Collector-Emitter Saturation Voltage VecE(sat) Vv (Ig = 1.0 A, Ip = 10 mA) 1.5 (Ig =2.0A, I, = 100 mA) 1.5 (Ig = 5.0 A, |, = 250 mA ) 2.0 Base-Emitter Saturation Voltage Vee;sat) Vv (Ig = 2.0A, Ip = 100 mA) 2.2 (Ig = 5.0A, ly = 250 mA) 2.3 Diode Forward Voltage Ve Vv (1,=7.0A) 3.5 DYNAMIC CHARACTERISTICS Small-Signal Current Gain ha (I, = 0.5 A, Vog= 5.0 V, f = 1.0 KHz ) 200 Output Capacitance Cop pF (Veg = 10 V, 1. = 0 , f = 1.0 MHz) 150 SWITCHING CHARACTERISTICS Delay Time Veg = 250 V, Ip = 5.0A ta 30(typ) ns Rise Time lay = -lg2 =250 mA, t 180 ns tp = 20us,Duty Cycle =2.0% c (typ) Storage Time t 3.5(typ) us Fail Time t, 1.6(typ) us (1) Pulse Test: Pulse width = 300 us , Duty Cycle = 2.0%TIP150,TIP151,TIP152 NPN Deere Tee ee eee erence cnc ee FIG-2 OC CURRENT GAIN FIG-3 BAES-EMITTER VOLTAGE Ty425C loflg=20 25C hre , OC CURRENT GAIN Vee, BASE-EMITTER VOLTAGE (VOLTS) 04 07 1.0 20 5.0 40 0.4 07 1.0 2.0 3.0 5.0 40 Ic , COLLECTOR CURRENT (AMP) iC , COLLECTOR CURRENT (AMP) FIG-4 COLLECTOR-EMITTER SATURATION VOLTAGE FIG-S REVERSE BIASE SAFE OPERATING AREA \oflp=20 VOLTAGE (VOLTS) TP 150 TIP152 Vee, COLLECTOR-EMITTER SATURATION Ic, COLLECTOR CURRENT (Amp.) TIP151 O04 07 10 20 30 5.0 10 0 100 200 300 200 500 Ic , COLLECTOR CURRENT (AMP) Vcz , COLLECTOR EMITTER (VOLTS) FIG-6 ACTIVE REGION SAFE OPERATING AREA There are two limitation on the power handling ability pc of a transistor:average junction temperature and second breakdown safe operating area curves indicate = Ic-Vce limits of the transistor that must be observed for reliable operation i.e., the transistor must not be subjected to greater dissipation than curves indicate. The data of FiG-6 curve is base on Typiq=150 C; Tc is variable depending on power level. second breakdown puise limits are valid for duty cycles to 10% provided - Bondng Wire Limt Tuer $150C,At high case temperatures,thermal limitation =a thermaly Unit will reduce the power that can be handled to values less T.#25C(Singe Puse) TIP1s1~L. than the limitations imposed by second breakdown. TIP152 To<2ere Ic , COLLECTOR CURRENT (Amp) 1 2 5 10 20 50 100 200 500 VCE , COLLECTOR EMITTER VOLTAGE (VOLTS)