150W Constant Voltage LED Driver LEDWV150 series FEATURES 3/4Ultra High Efficiency (Up to 94%) 3/4High Power Factor Correction (0.99 Typ) 3/4 150 W Continuous Output Power 3/4Lightning Protection 3/4Over Voltage, Over Temp. , Short Circuit & Over current Protection 3/4Waterproof (IP67) 3/4Comply UL8750 & EN61347 Safety Regulations 3/4Very High MTBF & Life Time SPECIFICATION LEDWV150S012ST LEDWV150S024ST LEDWV150S036ST LEDWV150S040ST LEDWV150S042ST LEDWV150S048ST LEDWV150S050ST LEDWV1150S052ST LEDWV150S054ST LEDWV150S056ST LEDWV150S081ST LEDWV150S105ST Voltage 12 Vdc 24 Vdc 36 Vdc 40 Vdc 42 Vdc 48 Vdc 50 Vdc 52 Vdc 54 Vdc 56 Vdc 81 Vdc 105 Vdc Max. Current 12.5 A 6.25 A 4.17 A 3.75 A 3.57 A 3.13 A 3.00 A 2.88 A 2.78 A 2.68 A 1.85 A 1.42 A Rated Power 150 W 150 W 150 W 150 W 150 W 150 W 150 W 150 W 150 W 150 W 150 W 150 W 0 - 2.88 A 0 - 2.78 A 0 - 2.68 A 0 - 1.85 A 0 - 1.42 A 93% 93% 94% 94% 70 V 95 V 128 V Model 5% Output Voltage Tolerance 2.0 % Vo Ripple & Noise (max.) (2) Current Range (Min - Max) 0 - 12.5 A 0 - 6.25 A 0 - 4.17 A 0 - 3.75 A 0 - 3.57 A 0 - 3.13 A Load Regulation 2% Setup, Rise Time 0.6S @ 110 VAC or 0.3S @ 220 VAC 10% When Power On or Off Output Overshoot / Undershoot W (Wide Range Input) = 90V ~305VAC Voltage Range 47Hz / 63Hz Input Frequency Range 0.99 @ 110 VAC and 0.96 at 220 VAC Power Factor Correction Efficiency (Typ.) at 230Vac 92% 93% 93% 93% 94% 93% 1.75 A / 100VAC AC Current (Typ.) Protections Environmental 0.8 A / 220VAC 110C max. temp. of components inside the case Over Temperature Protection 135% Io (Typ.) Protection type : Hiccup mode, recovers automatically after fault condition is removed Over Current Protection 15 V 30 V 43 V 50 V 51 V 58 V 60 V 62 V 65 V Protection type : latch-off mode, Power supply must turn off and on again -35C ~ +70C Operational Temperature Range Storage - 40 ~ +85C Operational 10 ~ 100% RH Humidity 5 ~100% R.H Storage Safety Standards Safety & EMC 93% Protection type : Hiccup mode, recovers automatically after fault condition is removed Short Circuit Protection Over Voltage (Typ.) 93% 65A @ 230VAC Input and 25C Inrush Current UL8750 compliance to UL1012 UL935, CAN/CSA-C22.2 (No. 0, No 107.1, No. 250.0) 2W No load Power Dissipation Withstand Voltage I/P - O/P: 3KVAC (4242 DC) I/P - FG: 1.5KVAC (2121 DC) O/P-FG: 0.5KVAC (707 DC), 1 minute EN55015 with 6db margin EMI Conduction & Radiation EN 61347-1, EN61347-2-13 CE EMS Immunity MTBF (3) Others 0 - 3.00 A 1% Line Regulation Life Time (3) Dimension (L*W*H) EN61000-3-2 , EN61000-3-3, EN61000-4-2, EN61000-4-3, EN61000-4-4, EN61000-4-5 EN61000-4-6, EN61000-4-8, EN61000-4-11, EN 61547 584K HRS Compliance: MIL-HDBK-217F @ 25C ambient temp. 74,000 hours @ 45C ambient temp. 199*67.5*40 (mm) - 7.83*2.66*1.57 (inch) 1000 g - 2.20Lbs Weight Autec Power Systems 667 E Cochran St, Simi Valley, CA93065 www.autec.com Tel: (805)522-0888 Fax: (805)522-8777 Mechanical Specification LEDWV-150S012ST All other models W HITE (ACN ) BLAC K (ACL) GR EEN (G ND) AC INPUT (3*AW G #18) D C OUTPUT (2*A WG #18) R ED (V+) BLAC K (V-) U nspecified tolerance: A 0 .2 SHIPPING SPECIFICATIONS PIN ASSIGNMENT AC CONNECTION Input DC Output PIN 1 LINE (Black) +V (Red) PIN 2 NEUTRAL (White) -V (Black) PIN 3 GROUND (Green) Connector Flying lead (stripped and tinned) Autec Power Systems 667 E Cochran St, Simi Valley, CA93065 Series UNITS PER CARTON LEDU(W)V-150 20.0 INDIVIDUAL BOX DIEMENSION Series inch LEDU(W)V-150 mm www.autec.com WIDTH 7.68 195.0 CARTON WEIGHT 26Kg LENGTH 2.68 68.0 57.20Lbs HEIGHT 1.57 40.0 Tel: (805)522-0888 Fax: (805)522-8777 Efficiency LEDU(W)V150S012ST LEDU(W)V150S024ST LEDU(W)V150S036ST LEDU(W)V150S040ST LEDU(W)V150S042ST LEDU(W)V150S048ST LEDU(W)V150S050ST LEDU(W)V1150S052ST LEDU(W)V150S054ST LEDU(W)V150S056ST LEDU(W)V150S081ST LEDU(W)V150S105ST Efficiency @ Full Load and 115VAC (min) 88% 89% 89% 89% 90% 89% 89% 89% 89% 89% 90% 90% Efficiency @ Full Load and 115VAC (typ) 89% 90% 90% 90% 91% 90% 90% 90% 90% 90% 91% 91% Efficiency @ Full Load and 230VAC (min) 91% 92% 92% 92% 93% 92% 92% 92% 92% 92% 93% 93% Efficiency @ Full Load and 230VAC (typ) 92% 93% 93% 93% 94% 93% 93% 93% 93% 93% 94% 94% Model Derating Curve Derating Curve 100 100 80 80 Load(%) Load(%) Derating Curve 60 60 40 40 20 20 0 0 -35 -20 -5 10 25 40 55 70 90 120 Ambient Temperature(C) 150 180 210 240 270 Input Voltage(V) NOTES: 1. Measured at full load, 220VAC input and 25 of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth oscilloscope and the output paralleled a 0.1uf ceramic capacitor & 10 uf electrolytic capacitor. 3. For 54V output model, measured at 110VAC input, 80%load and 25 of ambient temperature. 4. For 54V output model, measured at 220VAC input, 80%load and 45 of ambient temperature. 5. All parameters NOT specially mentioned are measured at 220VAC input, rated load and 25 of ambient temperature. 6. Specifications are subject to change without notice. AUTEC cannot be held liable for errors or omissions or the consequences thereof. 7. A suffix -XXXX may be added to denote variation or modifications to the base product, were X can be any alphanumeric character or blank Autec Power Systems 667 E Cochran St, Simi Valley, CA93065 www.autec.com Tel: (805)522-0888 Fax: (805)522-8777