1
Voltage Selector SWA2 (Print)
https://www.schurter.com /PG04
Fuses
Voltage selector switch, 2 stages, series-parallel, PCB mounting
Approvals and Compliances
Description
- Voltage Selector , 2 stages
- Series-parallel connections
- PCB terminals
References
Alternative: version for panel mounting SWA1 (Frontpl)
Technical Data
Ratings IEC: 6.3 A / 250 VAC; 50 Hz
␣ UL: 6.3 A / 250 VAC; 60 Hz
␣ CSA: 6.3 A / 250 VAC; 60 Hz
Mounting PCB Mounting
Terminal Solder, THT
Number of Stages 2
Lifetime 300 operating cycles (without load)
Degree of Protection from front side IP 40
Protection Class Suitable for appliances with protection
class II acc. to IEC 61140
Allowable Operation Tempe-
rature
-40 °C to 85 °C
Climatic Category 25/85/21 acc. to IEC 60068-1
Material: Socket Thermoplastic, black, UL 94V-0
Weight 3.9 g
Solderability 235 °C / 2 sec acc. to IEC 60068-2-20,
Test Ta, method 1
Resistance to Soldering Heat 260 °C / 5 sec acc. to IEC 60068-2-20,
Test Tb, method 1A
Insulation Resistance > 10'000MΩ (500VDC; 1min)
Contact Resistance < 10 mΩ at 20 mV
Dielectric Strength > 2kVAC between L-N
> 4kVAC between L/N-PE
(1min; 50Hz)
Clearance and Creepage Di-
stance
> 3mm
> 8mm between L/N-PE
Resistance to Vibration acc. to IEC 60068-2-6, test Fc
Approvals and Compliances
Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in Details about
Approvals
Approvals
The approval mark is used by the testing authorities to certify compliance with the safety requirements placed on electronic products.
Approval Reference Type: SWA2
Approval Logo Certificates Certification Body Description
VDE Approvals VDE Certificate Number:
UL Approvals UL UL File Number: E72661
Product standards
Product standards that are referenced
Organization Design Standard Description
Designed according to UL 508 Industrial control equipment
Designed according to CSA C22.2 no. 14 Fuseholder general requirements
2
Voltage Selector
SWA2 (Print) https://www.schurter.com /PG04
Fuses
Application standards
Application standards where the product can be used
Organization Design Standard Description
Designed for applications acc. IEC/UL 60950 IEC 60950-1 includes the basic requirements for the safety of information
technologyequipment.
Compliances
The product complies with following Guide Lines
Identification Details Initiator Description
CE declaration of conformity SCHURTER AG The CE marking declares that the product complies with the applicable
requirements laid down in the harmonisation of Community legislation on
its affixing in accordance with EU Regulation 765/2008.
REACH SCHURTER AG On 1 June 2007, Regulation (EC) No 1907/2006 on the Registration,
Evaluation, Authorization and Restriction of Chemicals 1 (abbreviated as
"REACH") entered into force.
Dimension [mm] 26.3 mm
2.3
20.8
21.84.5
1.1
ø15.2
13.5
1.6
5.5
115V
230V
M12.7x1.5 A)
A) double start thread
Drilling diagram
0
+0.1
ø9.4
72°
1.3
0
+0.2
72°
72°
Diagrams
234
1
23 23
4
14
1
115V 230V
A)
B)
A) Power mains
B) Internal contact arrangement for series-parallel connection
3
Voltage Selector SWA2 (Print)
https://www.schurter.com /PG04
Fuses
All Variants
Letterings Order Number
Stage 1 Stufe 2
110 220 0033.4601 █
120 240 0033.4603
115 230 0033.4604 █
230 240 0033.4610
␣ ␣ 0033.4614
120 230 0033.4615
100 230 0033.4619
█ Most Popular.
Availability for all products can be searched real-
time:https://www.schurter.com/en/Stock-Check/
Stock-Check-SCHURTER
Packaging Unit 100 Pcs
The specifications, descriptions and illustrations indicated in this document are based on current
information. All content is subject to modifications and amendments. Information furnished is believed
to be accurate and reliable. However, users should independently evaluate the suitability and test each
product selected for their own applications.
13.12.2017
