e3
DS21216 Rev. 7 - 2 1 of 3 GBJ6005-GBJ610
www.diodes.com ãDiodes Incorporated
Characteristic Symbol GBJ
6005
GBJ
601
GBJ
602
GBJ
604
GBJ
606
GBJ
608
GBJ
610 Unit
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
VRRM
VRWM
VR
50 100 200 400 600 800 1000 V
RMS Reverse Voltage VR(RMS) 35 70 140 280 420 560 700 V
Average Forward Rectified Output Current @ TC= 110°C IO6.0 A
Non-Repetitive Peak Forward Surge Current, 8.3 ms single
half-sine-wave superimposed on rated load IFSM 170 A
Forward Voltage per element @ IF= 3.0A VFM 1.0 V
Peak Reverse Current @ TC= 25°C
at Rated DC Blocking Voltage @ TC= 125°C IR5.0
500 µA
I2t Rating for Fusing (t < 8.3ms) (Note 1) I2t 120 A2s
Typical Total Capacitance per Element (Note 2) CT55 pF
Typical Thermal Resistance Junction to Case (Note 3) RqJC 1.8 °C/W
Operating and Storage Temperature Range Tj,T
STG -65 to +150 °C
GBJ6005 - GBJ610
6.0A GLASS PASSIVATED BRIDGE RECTIFIER
Features
·Case: GBJ
·Case Material: Molded Plastic. UL Flammability
Classification Rating 94V-0
·Moisture Sensitivity: Level 1 per J-STD-020C
·Lead Free Plating (Tin Finish).
·Terminals: Plated Leads, Solderable per MIL-STD-202,
Method 208
·Polarity: Molded on Body
·Mounting: Through Hole for #6 Screw
·Mounting Torque: 5.0 in-lbs Maximum
·Marking: Type Number
·Weight: 6.6 grams (approximate)
Mechanical Data
Notes: 1. Non-repetitive, for t > 1ms and < 8.3 ms.
2. Measured at 1.0 MHz and applied reverse voltage of 4.0V DC.
3. Thermal resistance from junction to case per element. Unit mounted on 75 x 75 x 1.6mm aluminum plate heat sink.
4. RoHS revision 13.2.2003. Glass and High Temperature Solder Exemptions Applied, see
EU Directive Annex Notes 5 and 7.
·Glass Passivated Die Construction
·High Case Dielectric Strength of 1500VRMS
·Low Reverse Leakage Current
·Surge Overload Rating to 170A Peak
·Ideal for Printed Circuit Board Applications
·UL Listed Under Recognized Component
Index, File Number E94661
·Lead Free Finish/RoHS Compliant (Note 4)
Single phase, 60Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
Maximum Ratings and Electrical Characteristics @ TA= 25°C unless otherwise specified
GBJ
Dim Min Max
A29.70 30.30
B19.70 20.30
C17.00 18.00
D3.80 4.20
E7.30 7.70
G9.80 10.20
H2.00 2.40
I0.90 1.10
J2.30 2.70
K3.0 X 45°
L4.40 4.80
M3.40 3.80
N3.10 3.40
P2.50 2.90
R0.60 0.80
S10.80 11.20
All Dimensions in mm
_
B
C
D
EEG
H
K
J
I
L
M
N
P
R
S
A
DS21216 Rev. 7 - 2 2 of 3 GBJ6005-GBJ610
www.diodes.com
0.01
0.1
1.0
10
0 0.4 0.8 1.2 1.6 1.8
V , INSTANTANEOUS FORWARD VOLTAGE (V)
Fi
g
.2 T
y
pical Forward Characteristics
(
per element
)
F
I , INSTANTANEOUS FORWARD CURRENT (A)
F
T=25°C
j
0
40
80
120
160
180
110 100
I , PEAK FORWARD SURGE CURRENT (A)
FSM
NUMBER OF CYCLES AT 60 Hz
Fi
g
. 3 Maximum Non-Repetitive Sur
g
e Current
T = 150°C
j
Single half-sine-wave
10
100
1
1 10 100
C , TOTAL CAPACITANCE (pF)
T
V , REVERSE VOLTAGE (V)
Fi
g
.4 T
y
pical Total Capacitance, Per Element
R
f = 1MHz
T=25°C
j
0.1
1.0
10
100
1000
02040 6080
100 120 140
PERCENT OF RATED PEAK REVERSE VOLTAGE (%)
Fi
g
.5 T
y
pical Reverse Characteristics
T = 50°C
j
T = 125°C
j
T = 100°C
j
T = 25°C
j
0
2
4
6
25 50 75 100 125 150
I , AVERAGE RECTIFIED CURRENT (A)
O
T , CASE TEMPERATURE (°C)
Fi
g
. 1 Forward Current Deratin
g
Curve
C
Resistive or
Inductive load
3
5
1
With heatsink
Without heatsink
Notes: 5. For packaging details, visit our website at http://www.diodes.com/datasheets/ap02008.pdf
DS21216 Rev. 7 - 2 3 of 3 GBJ6005-GBJ610
www.diodes.com
Ordering Information
Device Packaging Shipping
GBJ6005-F GBJ 15/Tube
GBJ601-F GBJ 15/Tube
GBJ602-F GBJ 15/Tube
GBJ604-F GBJ 15/Tube
GBJ606-F GBJ 15/Tube
GBJ608-F GBJ 15/Tube
GBJ610-F GBJ 15/Tube
(Note 5)
IMPORTANT NOTICE
LIFE SUPPORT
Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further
notice to any product herein. Diodes Incorporated does not assume any liability arising out of the application or use of any product described herein; neither
does it convey any license under its patent rights, nor the rights of others. The user of products in such applications shall assume all risks of such use and will
agree to hold Diodes Incorporated and all the companies whose products are represented on our website, harmless against all damages.
Diodes Incorporated products are not authorized for use as critical components in life support devices or systems without the expressed written approval of the
President of Diodes Incorporated.
