Ordering information Small,High-voltage pulses common mode noise filters (1-Stage filter) EAP series EAP -10 -472 1 2 3 -O 4 1Model Name 2Rated Current 3Line to ground capacitor code:See table 1.1. table1.1 Line to ground capacitor code Code 000 101 221 331 471 681 102 222 332 472 * The terminal cover is retracted inside the unit DIN rail installation type is option Line to ground Leakage Current capacitor (Input 125/250V 60Hz) (nominal value) 5 A/ 10 A max Not Provided 100pF 12.5 A/ 25 A max A/ 50 A max 220pF 25 330pF 37.5 A/ 75 A max A/100 A max 470pF 50 75.5 A/150 A max 680pF 0.13mA/0.25mA max 1000pF 0.25mA/0.5 mA max 2200pF 0.38mA/0.75mA max 3300pF 0.5 mA/1.0 mA max 4700pF When the line to ground capacitor code is different, the attenuation characteristic is different. 4Options D :DIN rail installation type * The dimensions change when the option is set. Refer to External view. Features of EAP series Small,High-voltage pulses common mode noise filters(1-Stage filter) - Single Phase 250 VAC -Small-size -Quick and easy push-down terminal Just connect the wires,push-down and tighten the screws with a screwdriver Specifications No. Items EAP-03-472 1 Rated Voltage[V] AC 1f 250 / DC250 EAP-06-472 2 Rated Current[A] 3 3 Test Voltage (Terminal-Mounting Plate) 2,500 VAC (Cutoff Current = 20mA), 1minute at room temperature and humidity 6 EAP-10-472 EAP-16-472 EAP-20-472 EAP-30-472 10 16 20 30 4 Isolation Resistance (Terminal-Mounting Plate) 500 VDC 500MW min at room temperature and humidity 5 Leakage current 125/250V 60Hz 0.5mA/1.0mA max 6 DC registance 180mW max 7 Safety agency approval temperatures -25 to +85C (Refer to Derating Curve) 8 Operating temperature -40 to +85C (Refer to Derating Curve) 9 Operating humidity 20 to 95%RH (Non condensing) 10 Storage temperature/humidity -40 to +85C/20 to 95%RH (Non condensing) 11 Vibration 10 to 55Hz, 19.6m/s2 (2G), 3min. Period, 1hour each X, Y and Z axis 12 Impact 196.1m/s2 (20G), 11ms Once each X, Y and Z axis 13 Safety agency approvals UL1283, CSA C22.2 No.8 (C-UL), DIN EN60939 VDE0565 Teil3-1, ENEC (At only AC input) 14 Case size (without projection) /Mass 39X30X85 mm (WXHXD) /170g max (Option : -D refer to external view) Circuit Diagram 110mW max 40mW max 20mW max 10mW max 6mW max Derating Curve Case 3 1 CY LINE LOAD CY 4 2 Noise Filter Load Factor [%] 100 80 60 40 20 0 -40 CY : Line to ground capacitor I-6 : Mounting Plate -30 -20 40 50 55 60 Ambient Temperature [C] 70 80 90 EAC,EAM,EAP series External view This product is shipped in the following condition,because it is equipped with push-down terminals. 1The terminal cover is retracted inside the unit. 2The screws for connecting the terminals are held in the up right position. Standard Type 85 75 0.5 72 M4 2.5 Protection Earth Terminal cover Terminal cover 12.7 9.7 0.5 39 2-M4 Output Terminal Name Plate Terminal cover M4 Protection Earth 2-f4.8 Mounting Hole 11.5 Mounting Plate 31.5 2-M4 Input Terminal 21 2 Closed the terminal cover 30 Tolerance : 1 Mass : 170g or less Mounting Plate : Iron (surface finishing:nickel plating)=1.0 CasePBT Dimensions in mm Terminal block screw tightening torque M41.6Nm(16.9kgfcm)max DIN rail installation Type 8.5 85 +2 -1 72 M4 2.5 Protection Earth 2-M4 Input Terminal 2-M4 Output Terminal Terminal cover 12.7 9.7 Name Plate M4 11.5 39 Mounting Plate Terminal cover 21 Terminal cover Protection Earth Tolerance : 1 Mass : 170g or less Mounting Plate : Iron (surface finishing:nickel plating)=1.0 CasePBT Dimensions in mm Terminal block screw tightening torque M41.6Nm(16.9kgfcm)max 7 (9) 30 2 Closed the terminal cover DIN rail Note when installing the noise filter on a DIN rail. When the noise filter is grounded through the DIN rail, the proper noise attenuation may not be achieved. Be sure to connect the protection earth (PE) of the noise filter body to the earth. DIN rail Name Plate Noise Filter I-7 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Cosel: EAP-03-101 EAP-03-101-D EAP-03-102 EAP-03-102-D EAP-03-221 EAP-03-221-D EAP-30-000-D EAP-10-000D EAP-16-000 EAP-16-000-D EAP-20-000 EAP-20-000-D EAP-30-000 EAP-03-000 EAP-03-000-D EAP-06-000 EAP-06-000-D EAP-10-000 EAP-30-471 EAP-30-471-D EAP-30-472 EAP-30-472-D EAP-30-681 EAP-30-681-D EAP-30-222 EAP-30-222-D EAP-30-331 EAP-30-331-D EAP-30-332 EAP-30-332-D EAP-30-101 EAP-30-101-D EAP-30-102 EAP-30-102-D EAP-30-221 EAP-30-221-D EAP-20-471 EAP-20-471-D EAP-20-472 EAP-20-472-D EAP-20-681 EAP-20-681-D EAP-20-222 EAP-20-222-D EAP-20-331 EAP-20-331-D EAP-20-332 EAP-20-332-D EAP-20-101 EAP-20-101-D EAP-20-102 EAP-20-102-D EAP-20-221 EAP-20-221-D EAP-16-471 EAP-16-471-D EAP-16-472 EAP-16-472-D EAP-16-681 EAP-16-681-D EAP-16-222 EAP-16-222-D EAP-16-331 EAP-16-331-D EAP-16-332 EAP-16-332-D EAP-16-101 EAP-16-101-D EAP-16-102 EAP-16-102-D EAP-16-221 EAP-16-221-D EAP-10-471 EAP-10-471-D EAP-10-472 EAP-10-472-D EAP-10-681 EAP-10-681-D EAP-10-222 EAP-10-222-D EAP-10-331 EAP-10-331-D EAP-10-332 EAP-10-332-D EAP-10-101 EAP-10-101-D EAP-10-102 EAP-10-102-D EAP-10-221 EAP-10-221-D EAP-06-471 EAP-06-471-D EAP-06-472 EAP-06-472-D EAP-06-681 EAP-06-681-D EAP-06-222 EAP-06-222-D EAP-06-331 EAP-06-331-D