Philips Components Product specification Aluminium electrolytic capacitors Power Standard Miniature 4-Terminal Snap-in 166/167 PSM-4TSI FEATURES * Keyed polarity obtained by 4 snap-in terminals * Polarized aluminium electrolytic capacitors, non-solid handbook, 4 columns blank blank * Large types, minimized dimensions, cylindrical aluminium case, insulated with a blue sleeve * Pressure relief on the top of the aluminium case MEA555 * Charge and discharge proof Fig.1 Component outlines. * Long useful life: 10000 hours at 85 C * High ripple current capability. APPLICATIONS * General purpose, industrial and audio/video systems handbook, 4 columns * Smoothing and filtering long life 105 C 168/169 PLL-4TSI 166/167 PSM-4TSI standard snap-in 85 C 056/057 PSM-SI * Standard and switched mode power supplies CCB033 * Energy storage in pulse systems * For excellent mounting stability. QUICK REFERENCE DATA VALUE DESCRIPTION Case size (Dnom x Lnom in mm) Rated capacitance range (E6/E12 series), CR 166 167 35 x 40; 35 x 50 35 x 40; 35 x 45; 35 x 50 3300 to 68000 F 330 to 1500 F 20% Tolerance on CR Rated voltage range, UR 10 to 100 V 200 to 400 V -40 to +85 C Category temperature range Endurance test at 85 C 5000 hours Useful life at 85 C 10000 hours Useful life at 40 C and 1.4 x IR applied 175000 hours Shelf life at 0 V, 85 C 500 hours Based on sectional specification IEC 384-4/CECC 30300 Climatic category IEC 68 1998 Jan 29 40/085/56 508 Philips Components Product specification Aluminium electrolytic capacitors Power Standard Miniature 4-Terminal Snap-in 166/167 PSM-4TSI Selection chart for CR, UR and relevant nominal case sizes (D x L in mm) for 166 series Preferred types in bold. UR (V) CR (F) 10 16 25 40 63 100 3300 - - - - - 35 x 40 4700 - - - - - 35 x 50 6800 - - - - 35 x 40 - 10000 - - - - 35 x 50 - 15000 - - - 35 x 40 - - 22000 - - 35 x 40 35 x 50 - - 33000 - 35 x 40 35 x 50 - - - 47000 35 x 40 35 x 50 - - - - 68000 35 x 50 - - - - - Selection chart for CR, UR and relevant nominal case sizes (D x L in mm) for 167 series Preferred types in bold. CR (F) 330 UR (V) 200 250 385 400 - - 35 x 40 35 x 40 - - - 35 x 45 470 - - 35 x 45 35 x 50 - - 35 x 50 - 680 - 35 x 40 - - 820 - 35 x 45 - - 1000 35 x 40 35 x 50 - - 1200 35 x 45 - - - 1500 35 x 50 - - - 390 L 1998 Jan 29 509 Philips Components Product specification Aluminium electrolytic capacitors Power Standard Miniature 4-Terminal Snap-in 166/167 PSM-4TSI MECHANICAL DATA AND PACKAGING QUANTITIES 60 handbook, 2 columns 60 60 handbook, 4 columns B 60 A C dummy D dummy 22.5 0.1 2 0.1 (4x) 22.5 CCB062 Lmax 6.3 1 CCB055 Bottom view Dimensions in mm. Dummy terminals (A and C) must be free from the electrical circuit. Dimensions in mm. For dimensions see Table 1. Fig.2 4-Terminal Snap-in. Table 1 Fig.3 Mounting hole diagram. Physical dimensions, mass and packaging information; see Fig.2 NOMINAL CASE SIZE D x L (mm) CASE CODE Dmax (mm) Lmax (mm) MASS (g) PACKAGING QUANTITIES (units per box) CARDBOARD BOX DIMENSIONS lxwxh (mm) 35 x 40 3540 36 42 55 50 390 x 198 x 54 35 x 45 3545 36 47 63 50 390 x 198 x 59 35 x 50 3550 36 52 72 50 390 x 198 x 64 MARKING The capacitors are marked (where possible) with the following information: * Rated capacitance (in F) * Tolerance code on rated capacitance (M for 20%) * Rated voltage (in V) * Climatic category in accordance with "IEC 68" * Date code (year and week) in accordance with "IEC 62" * Code for factory of origin * Name of manufacturer * `-' sign to indicate the negative terminal, visible from the top and side of the capacitor * Code number (last 8 digits) * Code for basic specification in accordance with "IEC 384-4-1" and "CECC 30301". 1998 Jan 29 510 Philips Components Product specification Aluminium electrolytic capacitors Power Standard Miniature 4-Terminal Snap-in ELECTRICAL DATA AND ORDERING INFORMATION Unless otherwise specified, all electrical values in Table 2 apply at Tamb = 20 , P = 86 to 106 kPa, RH = 45 to 75%. SYMBOL DESCRIPTION Ordering example Electrolytic capacitor 166 series 15000 F/40 V; 20% Nominal case size: 35 x 40 mm CR rated capacitance at 100 Hz IR rated RMS ripple current at 100 Hz and 85 C IL1 max. leakage current after 1 minute at UR IL5 max. leakage current after 5 minutes at UR ESR max. equivalent series resistance at 100 Hz Z max. impedance at 10 kHz Table 2 166/167 PSM-4TSI Catalogue number: 2222 166 57153. Electrical data and ordering information for 166/167 series; preferred types in bold UR (V) CR 100 Hz (F) NOMINAL CASE SIZE D x L (mm) CASE CODE IR 100 Hz 85 C (A) IL1 1 min (A) IL5 5 min (A) 10 47000 35 x 40 3540 5.10 2824 944 68000 35 x 50 3550 5.88 4084 1364 28 23 166 54683 16 33000 35 x 40 3540 5.02 3172 1060 32 28 166 55333 47000 35 x 50 3550 5.34 4516 1508 34 32 166 55473 25 40 ESR 100 Hz (m) 31 Z 10 kHz (m) 26 CATALOGUE NUMBER 2222 ... ..... 166 54473 22000 35 x 40 3540 4.48 3304 1104 40 28 166 56223 33000 35 x 50 3550 4.98 4954 1654 39 33 166 56333 15000 35 x 40 3540 4.05 3604 1204 49 41 166 57153 22000 35 x 50 3550 4.86 5284 1764 40 33 166 57223 6800 35 x 40 3540 4.01 2574 861 50 42 166 58682 10000 35 x 50 3550 5.00 3784 1264 39 33 166 58103 100 3300 35 x 40 3540 2.84 1984 664 100 95 166 59332 4700 35 x 50 3550 3.59 2824 677 75 70 166 59472 200 1000 35 x 40 3540 2.85 1204 404 160 135 167 52102 1200 35 x 45 3545 2.98 1444 484 150 130 167 42122 63 1500 35 x 50 3550 3.66 1804 604 120 105 167 52152 680 35 x 40 3540 2.60 1024 344 240 145 167 53681 820 35 x 45 3545 2.70 1234 414 195 128 167 43821 250 1000 35 x 50 3550 3.12 1504 504 160 105 167 53102 330 35 x 40 3540 2.11 766 258 480 280 167 58331 470 35 x 45 3545 2.29 1089 366 340 220 167 48471 385 400 1998 Jan 29 470 35 x 50 3550 2.76 1089 366 340 220 167 58471 330 35 x 40 3540 1.85 796 268 480 280 167 56331 390 35 x 45 3545 2.08 940 316 410 265 167 46391 470 35 x 50 3550 2.76 1132 380 340 220 167 56471 511 L Philips Components Product specification Aluminium electrolytic capacitors Power Standard Miniature 4-Terminal Snap-in 166/167 PSM-4TSI Additional electrical data PARAMETER CONDITIONS VALUE Voltage Surge voltage for short periods 250 V versions Us = 1.15 x UR 385 V versions Us = 1.1 x UR Urev 1 V Reverse voltage Current Leakage current after 1 minute at UR IL1 0.006CR x UR + 4 A after 5 minutes at UR IL5 0.002CR x UR + 4 A all case sizes typ. 19 nH Inductance Equivalent series inductance (ESL) max. 25 nH 1998 Jan 29 512 Philips Components Product specification Aluminium electrolytic capacitors Power Standard Miniature 4-Terminal Snap-in 166/167 PSM-4TSI RIPPLE CURRENT AND USEFUL LIFE Table 3 Multiplier of ripple current (IR) as a function of frequency FREQUENCY (Hz) IR MULTIPLIER UR = 10 to 25 V UR = 40 to 100 V UR > 100 V 50 0.93 0.91 0.86 100 1.00 1.00 1.00 200 1.04 1.05 1.13 400 1.07 1.09 1.21 1000 1.11 1.13 1.29 2000 1.13 1.15 1.32 4000 1.15 1.18 1.35 10000 1.18 1.22 1.40 MGA453 2.4 handbook, full pagewidth 2.3 IA IR 2.2 2.1 2.0 1.9 1.8 1.7 1 life multiplier 2 1. 1.6 5 1. 2 1.5 5 2. 3 1.4 4 5 1.3 8 10 1.2 20 (1) 30 1.0 60 0.8 80 0.5 0.0 40 L 15 1.1 50 60 70 80 Tamb ( oC) IA = actual ripple current at 100 Hz and 85 C. IR = rated ripple current at 100 Hz and 85 C. (1) Useful life at 85 C and IR applied: 10000 hours. Fig.4 Multiplier of useful life as a function of ambient temperature and ripple current load. 1998 Jan 29 513 90 Philips Components Product specification Aluminium electrolytic capacitors Power Standard Miniature 4-Terminal Snap-in 166/167 PSM-4TSI SPECIFIC TESTS AND REQUIREMENTS General tests and requirements are specified in this handbook, Section "Tests and Requirements". Table 4 Test procedures and requirements TEST NAME OF TEST Endurance REFERENCE IEC 384-4/ CECC 30300 subclause 4.13 PROCEDURE (quick reference) Tamb = 85 C; UR applied; 5000 hours REQUIREMENTS UR 100 V; C/C: 15% UR > 100 V; C/C: 10% Z 2 x spec. limit IL5 spec. limit Useful life CECC 30301 subclause 1.8.1 Tamb = 85 C; UR and IR applied; 10000 hours UR 100 V; C/C: 45% UR > 100 V; C/C: 30% Z 3 x spec. limit IL5 spec. limit no short or open circuit, no visible damage total failure percentage: UR 100 V: 1%; UR > 100 V: 3% Shelf life (storage at high temperature) 1998 Jan 29 IEC 384-4/ CECC 30300 subclause 4.17 Tamb = 85 C no voltage applied; 500 hours after test: UR to be applied for 30 minutes, 24 to 48 hours before measurement 514 C/C: 10% IL5 2 x spec. limit