HARTING Han(R) 24 HPR Industrial enlarged Cable 8-wire, Cat. 5, PUR Industrial Cable 8-wire, Cat. 5, PUR Advantages General * Suitable for generic cabling Category 5 / Class D according ISO/IEC 11801 respectively EN 50173-1 especially for flexible installation (patch cords) * Qualified for transmission up to 1GigaBit Ethernet 1000Base-T acc. IEEE802.3ab * Based on stranded copper wires 26/7AWG delivers patch cord performance up to 100MHz * Applicable for industrial premises * Double jacket allows Easy-Stripping and delivers very short assembling time * Good EMC capability based on fully screen design * Flame retardant, halogen free and RoHS compliant * UL approved, UL AWM style 20963, E96807 This high-speed data cable was designed for flexible installation in industrial premises and it's especially suitable for termination of HARTING RJ45 data plugs in IP20 as well as in IP67/65. The four pair / eight wire TP construction allows the transmission of IT digital and analogue signals like Ethernet 10/100Mbit/s, 1GigaBit/s, video and voice services as well as IP-based data services. It delivers all characteristics to complete a Generic cabling system according ISO/IEC 24702:2006 respectively EN 50173-3:2007. Maximum patch cord length specified up to 20m (part of transmission channel class D) Transmission performance meets Cat.5 specification up to 100MHz for 1GigaBit Ethernet transmission according IEEE802.3ab. The cable is fully screened by an overall wire braid and guaranties a very protective signal transmission and high EMC performance. PUR is used as jacket material. The cable is flame retardant, halogen free and RoHS compliant. Identification Part number Drawing Industrial Ethernet Cable 8-wires, Cat. 5, PUR 20 m ring 09 45 600 0430 50 m ring 09 45 600 0440 100 m ring 09 45 600 0400 500 m reel 09 45 600 0420 * * * * * Wire: bare stranded copper, AWG26/7 Insulation: PE, O 1.0 mm Inner sheath: halogen free, flame retardant compound Overall screen: Aluminium-bonded polyeste tape and tinned copper wire braid, braid coverage about 85% Outer sheath: PUR, flame retardant, lead free Color code: whbu/bu, whor/or, whgn/gn, whbr/br Color of inner sheath: white Color of outer sheath: rape yellow, RAL 1021 Overall diameter: 6.5 mm - 6.9 mm All data given is in line with the actual state of art and therefore not binding. HARTING reserves the right to modify designs without giving the relevant reasons. HARTING Industrial Cable 8-wire, Cat. 5, PUR Technical Characteristics Performance Mechanical Characteristics Minimal bending radius Category 5 according to EN 50288-2-2(2004) /IEC 61 156-6(2002) Tensile strength Crush During installation: 8 x diameter After installation: 4 x diameter max. 60 N 1000 N/100mm Electrical Characteristics at 20C Transfer impedance at 10 MHz Coupling attenuation up to 1000 MHz DC loop resistance Insulation resistance Mutual capacitance Signal velocity Propagation delay Skew at 100 MHz Characteristic impedance at 100 MHz Test voltage Operating voltage 5 mOhm/m 90 dB max. 145 Ohm/km min. 5 GOhm x km 47 pF/m 0.69 c 485 ns/100m 15 ns/100m 100 Ohm +/- 5 Ohm 1000V max. 125V Chemical Characteristics Flame retardant Halogen free Fire load Free of hazardous substances IEC 60332-1-2 IEC 60754-2 0.75 MJ/m RoHS 2002/95/EG Thermal Characteristics Temperature range for fixed installation Temperature range for mobile operation - 40 C to + 80 C -10 C to + 60 C Printing HARTING INDUSTRIAL CABLE SF/UTP ES CAT 5 PUR 4x2xAWG26/7 * E96807 RU" AWM 20963 80C 30V * 094560001050000 $Production lot code$ $Meter marking$ Weight about 58 kg/km HARTING Industrial Cable 8-wire, Cat. 5, PUR Technical Characteristics Frequency MHz Attenuation dB/10m NEXT dB PS NEXT dB ACR dB@10m PS ACR dB@10m EL FEXT dB@10m PS EL FEXT dB@10m Return Loss dB typ. Cat 5 max* typ. Cat 5 max* typ. Cat 5 max* typ. Cat 5 max* typ. Cat 5 max* typ. Cat 5 max* typ. Cat 5 max* typ. Cat 5 max* 1 0.24 0.32 76 65 73 62 76 65 73 62 91 64 88 61 24.9 - 4 0.44 0.6 71 56 68 53 70 56 67 53 76 52 73 49 29.8 23 10 0.8 0.95 64 50 61 47 63 49 60 47 68 44 65 41 38.2 25 16 1.01 1.21 60 47 57 44 59 46 56 44 64 61 61 37 39.3 25 31.25 1.44 1.71 56 43 53 40 54 41 51 40 58 34 55 31 36.7 23.6 62.5 2.07 2.48 52 38 49 35 50 36 47 35 52 28 49 25 35 21.5 100 2.66 3.2 48 35 45 32 45 32 42 32 47 24 44 21 29.9 20.1 155 3.26 - 45 - 42 - 42 - 39 - 42 - 39 - 26.2 - 200 3.86 - 42 - 39 - 39 - 36 - 37 - 34 - 23.5 - * EN 50288-2-2(2004)/IEC 61156-6(2002) 2007-10-08 HARTING Electric GmbH & Co. KG Wilhelm-Harting-Strae 1 | D-32339 Espelkamp | Postfach 14 73 | D-32328 Espelkamp Tel.: +49 5772 47-97100 | Fax: +49 5772 47-688 | HARTING.Electric@HARTING.com | www.HARTING.com