P R O D U C T B R I E F Terminus Plug-In Series GSM865CF Terminal Modem Description The Janus line of Terminus Plug-In modems are footprint compatible, GPS enabled, plug-in terminals for use in GSM/ GPRS, EDGE, CDMA, HSPA+, EV-DO communication networks, and also Wi-Fi connectivity. They were specifically designed to provide customers with cost effective products that are easily integrated into new and existing designs, require limited customer certification resources, and are completely interchangeable to allow for maximum network flexibility while removing the worry of product obsolescence. The Plug-In Terminus GSM865CF is a quad band, GSM/GPRS wireless communication modem specifically designed for worldwide M2M network deployment. Easily integrated into any new or existing hardware applications via its standard DIP pin configuration, the GSM865CFCF is a cost-effective solution for GSM M2M connectivity. Users can choose to mount the modem directly onto their PC Board or simply mount in a DIP socket or header. The GSM864CF has a 5V power supply, 7 configurable GPIOs, 1 DAC and 1 ADC, and optional GPS. Serial UARTs can be used to communicate with the device. With all of these innovative and cost effective features, the GSM865CFCF is an easy answer for your embedded M2M application requirements. Applications GSM865CF Features Vending Machines Quad-band EGSM 850 / 900 / 1800 / 1900 MHz GSM/GPRS protocol stack 3GPP Release 4 compliant Control via AT commands according to 3GPP 27.005, 27.007 2111 Comprehensive Drive Aurora, Illinois 60505 630.499.2121 Fax: 630.851.5040 www.janus-rc.com Bulletin Revision Date JA03-PB_GSM P04 27 Aug 2012 and Telit custom Control via remote AT commands Serial port multiplexer 3GPP 27.010 SIM application toolkit 3GPP TS 51.014 SIM access profile TCP/IP stack access via AT commands Over-the-Air firmware management Voice and SMS (MO / MT) Output power * Class 4 (2W) @ 850 / 900 MHz * Class 1 (1W) @ 1800 / 1900 MHz Sensitivity: * < -107 dBm @ 850 / 900 MHz * < -106 dBm @ 1800 / 1900 MHz DARP/SAIC support Dimensions: 2.5" x 1.4" x 0.365" Operational temperature range (without GPS): -40C to 80C Operational temperature range (GPS configured): -30C to 65C Internal LDO regulator * Input voltage range: 4.75 to 5.25Vdc (5.0Vdc Nominal) * Supply disable via terminal input pin SIM Card * Standard locking SIM card socket * Or, optional SIM on a chip GSM and GPS available via Murata GSC miniature RF connector GPS * Stand alone GPS available at terminal pin interface * Dedicated GPS antenna connection with active antenna support Suitable for all M2M Applications Fleet Management Asset Tracking Security Systems Telemetry Telematics & Telecontrol Remote Monitoring Systems Remote Meter Reading Terminus Models & Ordering Ordering GSM865CF v1.1 GSM865CF v2.0 Description Terminus GSM Plug-In Modem - GPS enabled Terminus GSM Plug-In Modem - without GPS Additional Plug-In Products CDMA864CF Terminus CDMA Plug-In v2.0 Modem: Sprint Certified CDMA864CF Terminus CDMA Plug-In v3.0 Modem: Verizon Certified CDMA864CF Terminus CDMA Plug-In v4.0 Modem: Aeris Certified HSPA910CF Terminus HSPA+ Plug-In v1.0 Modem - GPS Enabled WiFi1500CF Terminus Wi-Fi Plug-In v1.0 Modem - GPS enabled WiFi1500CF Terminus WiFi Plug-In v2.0 Modem - without GPS EVDO910CF Terminus EV-DO Plug-In v3.0 Modem - Verizon 2.300 .100 TYP .047 DIA (49) .050 PIN 49 PIN 26 (TOP VIEW) 1.100 PIN 1 PIN 25 .100 TYP 2.400 GSM865CF Mechanical Drawing Terminus Plug-In Janus Remote Communications Europe Division of The Connor-Winfield Corporation 2111 Comprehensive Drive * Aurora, Illinois 60505 630.499.2121 * Fax: 630.851.5040 www.janus-rc.com Bay 143 Shannon Industrial Estate Shannon, Co. Clare, Ireland Phone: +353 61 475 666