EF2-1.5NUX-L-A - NEC Electronics

●Allspecificationsinthiscatalogandproductionstatusofproductsaresubjecttochangewithoutnotice.Priortothepurchase,pleasecontactNECTokinforupdatedproductdata.

●Pleaserequestforaspecificationsheetfordetailedproductdatapriortothepurchase.

●Beforeusingtheproductinthiscatalog,pleaseread"Precautions"andothersafetyprecautionslistedintheprintedversioncatalog.

2006.03.17P0610EMDD03VOL02E

For Right Use of Miniature Relays

DO NOT EXCEED MAXIMUM RATINGS.

Do not use relays under exceeding conditions such as over ambient temperature, over voltage and over

current. Incorrect use could result in abnormal heating, damage to related parts or cause burning.

READ CAUTIONS IN THE SELECTION GUIDE.

Read the cautions described in NEC/TOKIN's "Miniature Relays" when you choose relays for your application.

The information in this document is subject to change without notice.

Date Published May 2005 P

Printed in Japan

DATA SHEET

MINIATURE SIGNAL RELAY

ED2/EF2 SERIES

Ultra-low power, compact and lightweight, High breakdown voltage,

Surface mounting type

DESCRIPTION

NEC TOKIN's new miniature signal relays, ED2/EF2 series, achieved 50 mW of ultra low power consumption.

FEATURES

 Low power consumption (50 mW)

 Applicable for the surge voltage standard of FCC (1500 V, 10 × 160 µs) and Telcordia (2500 V, 2 × 10 µs)

 Two types for through-hole mounting (ED2 series) and surface mounting (EF2 series)

 Variation of dense mounting type and/or long-joint-life type for latest SMT

• Compatible configuration and terminal allocation with dense mounting type of EE2 series

• Upgraded soldering joint reliability between the relay terminal and PCB by optimization of the terminal

configuration;

20-year-joint-life under 35°C-per-day-temperature-difference specified in IPC-SM-785 for

telecommuication equipment

APPLICATIONS

Electronic switching systems, PBX, terminal equipment, telephone system.

●Allspecificationsinthiscatalogandproductionstatusofproductsaresubjecttochangewithoutnotice.Priortothepurchase,pleasecontactNECTokinforupdatedproductdata.

●Pleaserequestforaspecificationsheetfordetailedproductdatapriortothepurchase.

●Beforeusingtheproductinthiscatalog,pleaseread"Precautions"andothersafetyprecautionslistedintheprintedversioncatalog.

2006.03.17P0610EMDD03VOL02E

ED2/EF2 SERIES

2

DIMENSIONS AND PAD LAYOUTS (Unit : mm (inch))

ED2 SERIES

EF2 SERIES

●Allspecificationsinthiscatalogandproductionstatusofproductsaresubjecttochangewithoutnotice.Priortothepurchase,pleasecontactNECTokinforupdatedproductdata.

●Pleaserequestforaspecificationsheetfordetailedproductdatapriortothepurchase.

●Beforeusingtheproductinthiscatalog,pleaseread"Precautions"andothersafetyprecautionslistedintheprintedversioncatalog.

2006.03.17P0610EMDD03VOL02E

ED2/EF2 SERIES

3

PIN CONFIGURATIONS (bottom view)

ED2 SERIES

EF2 SERIES

MARKINGS (top view)

SAFETY STANDARD AND RATING

TUV Certified

(EN60255/IEC60255)

UL Recognized

(UL508)*

File No E73266

CSA Certificated

(CSA C22.2 No14)

File No LR46266 No.9950557

Nonlatch and Single-coil latch 30 Vdc, 1 A (Resistive)

110 Vdc, 0.3 A (Resistive)

125 Vac, 0.5 A (Resistive)

Creepage and clearance of coil to contact is over

than 2 mm (According EN60950)

* Spacing : UL114, UL478 Basic insulation class

●Allspecificationsinthiscatalogandproductionstatusofproductsaresubjecttochangewithoutnotice.Priortothepurchase,pleasecontactNECTokinforupdatedproductdata.

●Pleaserequestforaspecificationsheetfordetailedproductdatapriortothepurchase.

●Beforeusingtheproductinthiscatalog,pleaseread"Precautions"andothersafetyprecautionslistedintheprintedversioncatalog.

2006.03.17P0610EMDD03VOL02E

ED2/EF2 SERIES

4

PERFORMANCE CHARACTERISTICS (Community)

Contact Form 2 Form c

Maximum Switching Power 30 W (resistive) 62.5 VA (resistive)

Maximum Switching Voltage 220 Vdc 250 Vac

Maximum Switching Current 1 A

Contact Ratings

Maximum Carrying Current 2 A

Minimum Contact Ratings 10 mV. dc, 10 µA ＊4

Initial Contact Resistance 75 mΩ max. (Initial)

Contact Material Silver alloy with gold alloy overlay

Non-Latch Type 50 to 70 mW

Single Coil Latch Type 30 to 80 mW

Nominal Operating Power

Double Latch Type 50 to 80 mW

Operate Time (Excluding Bounce) Approximately 3 ms

Release Time (Excluding Bounce) Approximately 2 ms without diode

Insulation Resistance 1000 MΩ at 500 Vdc

Between Open Contacts

Between Adjacent Contacts

1000 Vac for one minute (1500 V surge, (10 × 160 µs ＊1)

Breakdown Voltage

Between Coil to Contact

Non-latch type and single-coil latch type

1500 Vac for one minute (2500 V surge, 2 × 10 µs ＊2)

Double-coil latch type

1000 Vac for one minute (1500 V surge, 10 × 160 µs ＊1)

Shock Resistance 735 m / s2 (misoperating)

980 m / s2 (destructive failure)

Vibration Resistance

10 to 55 Hz at double amplitude at 3 mm

(misoperating)

10 to 55 Hz, double amplitude of 5 mm

(Destructive failure)

Non-latch type (Additional “N”): - 40 to +85°C

Non-latch type (Standard): - 40 to +70°C

Ambient Temperature

Latch type : - 40 to +70°C

Coil Temperature Rise 7 degrees at nominal coil voltage (50 mW)

1 × 108 ＊3 operations (Non-latch type)

No-load 1 × 107 operations (Latch type)

50 Vdc 0.1 A (resistive), 1 × 106 operations at 70°C

Running specifications

Load 10 Vdc 10 mA (resistive), 1 × 106 operations at 70°C

Weight Approximately 2.2 grams

＊1 rise time : 10 µs, decay time to half crest : 160 µs

＊2 rise time : 2 µs, decay time to half crest : 10 µs

＊3 This shows a number of operation where it can be running by which a fatal defect is not caused, and a number of

operation by which a steady characteristic is maintained is 1 × 107 operations.

＊4 This value is a reference value in the resistance load.

Minimum capacity changes depending on seitching frequency and environment temperature and the load.

Recommended relay drive conditions

Drive under conditions. If it is impossible, please inquire to NEC.

Additional “N” type

of non-latch

Ambient temperature

- 40 to +85°C

standard type

of non-latch

Voltage: within ±5% at nominal voltage Ambient temperature

- 40 to +70°C

Single coil latch type

Square pulse (rise and fall time is rapidly)

Pulse height : within ±5% at nominal voltage

Pulse width : More than 10 ms

Ambient temperature

- 40 to +70°C

●Allspecificationsinthiscatalogandproductionstatusofproductsaresubjecttochangewithoutnotice.Priortothepurchase,pleasecontactNECTokinforupdatedproductdata.

●Pleaserequestforaspecificationsheetfordetailedproductdatapriortothepurchase.

●Beforeusingtheproductinthiscatalog,pleaseread"Precautions"andothersafetyprecautionslistedintheprintedversioncatalog.

2006.03.17P0610EMDD03VOL02E

ED2/EF2 SERIES

5

PART NUMBER SYSTEM

Note 1. There are two specification in operate voltage of Non-latch type relay.

Part Number Must Operate Voltage

Additional “N” type ED2-＊NU

-

＊NJ 75%

Standard type ED2-＊ 80%

＊ : Nominal coil voltage

Note 2. There are two specification in operate voltage of Non-latch type relay.

Part Number Must Operate Voltage

Additional “N” type

ED2-＊NU

-

＊NUX

-

＊NUH

-

＊NUN

75%

Standard type EF2-＊ 80%

＊ : Nominal coil voltage

●Allspecificationsinthiscatalogandproductionstatusofproductsaresubjecttochangewithoutnotice.Priortothepurchase,pleasecontactNECTokinforupdatedproductdata.

●Pleaserequestforaspecificationsheetfordetailedproductdatapriortothepurchase.

●Beforeusingtheproductinthiscatalog,pleaseread"Precautions"andothersafetyprecautionslistedintheprintedversioncatalog.

2006.03.17P0610EMDD03VOL02E

ED2/EF2 SERIES

6

NOMINAL LINEUP (Community)

Non-latch Type (Standard) at 20°C

Nominal Coil

Voltage

(Vdc)

Coil

Resistance

(Ω) ±10 %

Must Operate

Voltage

(Vdc)

Must Release

Voltage

(Vdc)

Nominal

operate power

(mW)

1.5 45 1.2 0.15 50

3 180 2.4 0.3 50

4.5 405 3.6 0.45 50

5 500 4 0.5 50

6 720 4.8 0.6 50

9 1473 7.2 0.9 55

12 2400 9.6 1.2 60

24 8229 19.2 2.4 70

Non-latch Type (Additional “N”) at 20°C

Nominal Coil

Voltage

(Vdc)

Coil

Resistance

(Ω) ±10 %

Must Operate

Voltage

(Vdc)

Must Release

Voltage

(Vdc)

Nominal

operate power

(mW)

1.5 45 1.13 0.15 50

3 180 2.25 0.3 50

4.5 405 3.38 0.45 50

5 500 3.75 0.5 50

6 720 4.5 0.6 50

9 1473 6.75 0.9 55

12 2400 9 1.2 60

24 8229 18 2.4 70

Single-Coil Latch Type at 20°C

Nominal Coil

Voltage

(Vdc)

Coil

Resistance

(Ω) ±10 %

Must Operate

Voltage

(Vdc)

Must Release

Voltage

(Vdc)

Nominal

operate power

(mW)

1.5 75 1.2 1.2 30

3 300 2.4 2.4 30

4.5 675 3.6 3.6 30

5 833 4 4 30

6 1200 4.8 4.8 30

9 2700 7.2 7.2 30

12 4800 9.6 9.6 30

24 7200 19.2 19.2 80

●Allspecificationsinthiscatalogandproductionstatusofproductsaresubjecttochangewithoutnotice.Priortothepurchase,pleasecontactNECTokinforupdatedproductdata.

●Pleaserequestforaspecificationsheetfordetailedproductdatapriortothepurchase.

●Beforeusingtheproductinthiscatalog,pleaseread"Precautions"andothersafetyprecautionslistedintheprintedversioncatalog.

2006.03.17P0610EMDD03VOL02E

ED2/EF2 SERIES

7

Double-Coil Latch Type at 20°C

Nominal Coil

Voltage

(Vdc)

Coil

Resistance

(Ω) ±10 %

Must Operate

Voltage

(Vdc)

Must Release

Voltage

(Vdc)

Nominal

operate power

(mW)

S 45 – –

1.5 R 45 1.2 1.2 50

S 180 – –

3 R 180 2.4 2.4 50

S 405 – –

4.5 R 405 3.6 3.6 50

S 500 – –

5 R 500 4 4 50

S 720 – –

6 R 720 4.8 4.8 50

S 1620 – –

9 R 1620 7.2 7.2 50

S 2880 – –

12 R 2880 9.6 9.6 50

●Allspecificationsinthiscatalogandproductionstatusofproductsaresubjecttochangewithoutnotice.Priortothepurchase,pleasecontactNECTokinforupdatedproductdata.

●Pleaserequestforaspecificationsheetfordetailedproductdatapriortothepurchase.

●Beforeusingtheproductinthiscatalog,pleaseread"Precautions"andothersafetyprecautionslistedintheprintedversioncatalog.

2006.03.17P0610EMDD03VOL02E

ED2/EF2 SERIES

8

PERFORMANCE DATA

■COIL TEMPERATURE RISE

Temperature is measured by coil resistance.

■SWITCHING CAPACITY

This is allowed maximum value.

Inquiry for NEC/TOKIN under maximum value at continuous use.

■MAXIMUM COIL VOLTAGE

This is maximum value of permissible alteration.

Inquiry for NEC/TOKIN at continuous use.

●Allspecificationsinthiscatalogandproductionstatusofproductsaresubjecttochangewithoutnotice.Priortothepurchase,pleasecontactNECTokinforupdatedproductdata.

●Pleaserequestforaspecificationsheetfordetailedproductdatapriortothepurchase.

●Beforeusingtheproductinthiscatalog,pleaseread"Precautions"andothersafetyprecautionslistedintheprintedversioncatalog.

2006.03.17P0610EMDD03VOL02E

ED2/EF2 SERIES

9

■APPLIED VOLTAGE VS. TIMING (Sample: ED2-5NU)

■OPERATE AND RELEASE VOLTAGE VS. AMBIENT TEMPERATURE

This shows a typical change of operate (release) voltage. Maximum value of operate estimated, so it must be

applied more than this value for safety operation. In case of “hot start operation”, please inquiry for NEC/TOKIN.

(Latch type and standard type of non-latch)

(Additional “N” type of non-latch)

●Allspecificationsinthiscatalogandproductionstatusofproductsaresubjecttochangewithoutnotice.Priortothepurchase,pleasecontactNECTokinforupdatedproductdata.

●Pleaserequestforaspecificationsheetfordetailedproductdatapriortothepurchase.

●Beforeusingtheproductinthiscatalog,pleaseread"Precautions"andothersafetyprecautionslistedintheprintedversioncatalog.

2006.03.17P0610EMDD03VOL02E

ED2/EF2 SERIES

10

■RUNNING TEST (Nonload)

(Load: None, Driving: 5V.DC, 50 Hz, 50% duty, Ambient temperature: Room temperature, Sample: ED2-5NU 20 pieces)

■RUNNING TEST (Load)

(Load: 50 V.DC 0.1 A resistive, Driving: 5V.DC, 5 Hz, 50% duty, Ambient temperature: 85 degree C, Sample: ED2-5NU

10 pieces)

■BREAKDOWN VOLTAGE

Sample: ED2-5NU 10 pieces

●Allspecificationsinthiscatalogandproductionstatusofproductsaresubjecttochangewithoutnotice.Priortothepurchase,pleasecontactNECTokinforupdatedproductdata.

●Pleaserequestforaspecificationsheetfordetailedproductdatapriortothepurchase.

●Beforeusingtheproductinthiscatalog,pleaseread"Precautions"andothersafetyprecautionslistedintheprintedversioncatalog.

2006.03.17P0610EMDD03VOL02E

ED2/EF2 SERIES

11

■ALTERNATION OF VOLTAGE AT DENSELY MOUNTING (Magnet interference)

●Allspecificationsinthiscatalogandproductionstatusofproductsaresubjecttochangewithoutnotice.Priortothepurchase,pleasecontactNECTokinforupdatedproductdata.

●Pleaserequestforaspecificationsheetfordetailedproductdatapriortothepurchase.

●Beforeusingtheproductinthiscatalog,pleaseread"Precautions"andothersafetyprecautionslistedintheprintedversioncatalog.

2006.03.17P0610EMDD03VOL02E

ED2/EF2 SERIES

12

TUBE PACKAGE (ED2, EF2)

Dimension of Package (Unit : mm)

Outline of Package

TAPE PACKAGE (EF2)

APPEARANCE TAPE DIMENSION mm (inch)

Relay orientation mark and tape carrying direction.

●Allspecificationsinthiscatalogandproductionstatusofproductsaresubjecttochangewithoutnotice.Priortothepurchase,pleasecontactNECTokinforupdatedproductdata.

●Pleaserequestforaspecificationsheetfordetailedproductdatapriortothepurchase.

●Beforeusingtheproductinthiscatalog,pleaseread"Precautions"andothersafetyprecautionslistedintheprintedversioncatalog.

2006.03.17P0610EMDD03VOL02E

ED2/EF2 SERIES

13

SOLDERING TEMPERATURE CONDITION

Through–hole mounting type (ED2)

① Automatic soldering

* Preheating : 100°C max. 1 minute max.

* Solder temperature : 260°C max.

* Solder time : 5 seconds max.

② Manual soldering

* Solder temperature : 350°C max.

* Solder time : 3 seconds max.

Surface mounting type (EF2)

Note:

1. Temperature profile shows printed circuit board surface temperature on the relay terminal portion.

2. Check the actual soldering condition to use other method except above mentioned temperature profiles.

●Allspecificationsinthiscatalogandproductionstatusofproductsaresubjecttochangewithoutnotice.Priortothepurchase,pleasecontactNECTokinforupdatedproductdata.

●Pleaserequestforaspecificationsheetfordetailedproductdatapriortothepurchase.

●Beforeusingtheproductinthiscatalog,pleaseread"Precautions"andothersafetyprecautionslistedintheprintedversioncatalog.

2006.03.17P0610EMDD03VOL02E

ED2/EF2 SERIES

14

Notes on Correct Use

1. Notes on contact load

Make sure that the contact load is within the specified range;

otherwise, the lifetime of the contacts will be shortened considerably.

Note that the running performance shown is an example, and that it

varies depending on parameters such as the type of load, switching

frequency, driver circuit, and ambient temperature under the actual

operating conditions. Evaluate the performance by using the actual

circuit before using the relay.

2. Driving relays

- If the internal connection diagram of a relay shows + and - symbols

on the coil, apply the rated voltage to the relay in the specified

direction. If a rippled DC current source is used, abnormalities such

as beat at the coil may occur.

- The maximum voltage that can be applied to the coil of the relay

varies depending on the ambient temperature. Generally, the higher

the voltage applied to the coil, the shorter the operating time. Note,

however, that a high voltage also increases the bounce of the

contacts and the contact opening and closing frequency, which may

shorten the lifetime of the contacts.

- If the driving voltage waveform of the relay coil rises and falls

gradually, the inherent performance of the relay may not be fully

realized. Make sure that the voltage waveform instantaneously rises

and falls as a pulse.

- For a latching relay, apply a voltage to the coil according to the

polarity specified in the internal connection diagram of the relay.

- If a current is applied to the coil over a long period of time, the coil

temperature rises, promoting generation of organic gas inside the

relay, which may result in faulty contacts. In this case, use of a

latching relay is recommended.

- The operating time and release time indicate the time required for

each contact to close after the voltage has been applied to or

removed from the coil. However, because the relay has a

mechanical structure, a bounce state exists at the end of the

operating and release times. Furthermore, because additional time

is required until the contact stabilizes after being in a high-resistance

state, care must be taken when using the relay at high speeds.

3. Operating environment

- Make sure that the relay mounted in the application set is used

within the specified temperature range. Use of a relay at a

temperature outside this range may adversely affect insulation or

contact performance.

- If the relay is used for a long period of time in highly humid (RH

85% or higher) environment, moisture may be absorbed into the

relay. This moisture may react with the NOx and SOx generated by

glow discharges that occur when the contacts are opened or closed,

producing nitric or sulfuric acid. If this happens, the acid produced

may corrode the metallic parts of the relay, causing operational

malfunction.

- Because the operating temperature range varies depending on the

humidity, use the relay in the temperature range illustrated in the

figure below. Prevent the relay from being frozen and avoid the

generation of condensation.

- The relay maintains constant sealability under normal atmospheric

pressure (810 to 1,200 hpa). Its sealability may be degraded or the

relay may be deformed and malfunction if it is used under barometric

conditions exceeding the specified range.

- The same applies when the relay is stored or transported. Keep the

upper-limit value of the temperature to which the relay is exposed

after it is removed from the carton box to within 50°C.

- If excessive vibration or shock is applied to the relay, it may

malfunction and the contacts remain closed. Vibration or shock

applied to the relay during operation may cause considerable

damage to or wearing of the contacts. Note that operation of a snap

switch mounted close to the relay or shock due to the operation of

magnetic solenoid may also cause malfunctioning.

4. Notes on mounting relays

- When mounting a relay onto a PC board using an automatic chip

mounter, if excessive force is applied to the cover of the relay when

the relay is chucked or inserted, the cover may be damaged or the

characteristics of the relay degraded. Keep the force applied to the

relay to within 1 kg.

- Avoid bending the pins to temporarily secure the relay to the PC

board. Bending the pins may degrade sealability or adversely affect

the internal mechanism.

- It is recommended to solder the relay onto a PC board under the

following conditions:

<1> Reflow soldering

Refer to the recommended soldering temperature profile.

<2> Flow soldering

Solder temperature: 260°C max., Time: 5 seconds max, Preheating:

100°C max./1 minute max.

<3> Manual soldering

Solder temperature: 350°C, Time: 2 to 3 seconds

- Ventilation immediately after soldering is recommended.

Avoid immersing the relay in cleaning solvent immediately after

soldering due to the danger of thermal shock being applied to the

relay.

- Use an alcohol-based or water-based cleaning solvent. Never use

thinner and benzene because they may damage the relay housing.

- Do not use ultrasonic cleaning because the vibration energy

generated by the ultrasonic waves may cause the contacts to

remain closed.

5. Handling

- Relays are packaged in magazine cases for shipment. If a space is

created in the case after some relays have been removed, be sure

to insert a stopper to secure the remaining relays in the case. If

relays are not well secured, vibration during transportation may

cause malfunctioning of the contacts.

- Exercise care in handling the relay so as to avoid dropping it or

allowing it to fall. Do not use a relay that has been dropped.

If a relay drops from a workbench to the floor, a shock of 9,800 m/s2

(1,000 G) or more is applied to the relay, possibly damaging its

functions. Even if a light shock has been applied to the relay,

thoroughly evaluate its operation before using it.

- Latching relays are factory-set to the reset state for shipment. A

latching relay may be set, however, by vibration or shock applied

while being transported. Be sure to forcibly reset the relay before

using it in the application set. Also note that the relay may be set by

unexpected vibration or shock when it is used in a portable set.

- The sealability of a surface-mount relay may be lost if the relay

absorbs moisture and is then heated during soldering. When storing

relays, therefore, observe the following points:

<1> Please use relays within 12 months after delivery. (Storage

conditions : 30 degrees C / 60% RH)

<2> For MBB packing, Please use relays within 2 years after

delivery.

(Stronge conditions : 30 degrees C / 60% RH)

After opening MBB packing, Please use within 3 months.

(Storage conditions : 30 degrees C/ 60% RH)

●Allspecificationsinthiscatalogandproductionstatusofproductsaresubjecttochangewithoutnotice.Priortothepurchase,pleasecontactNECTokinforupdatedproductdata.

●Pleaserequestforaspecificationsheetfordetailedproductdatapriortothepurchase.

●Beforeusingtheproductinthiscatalog,pleaseread"Precautions"andothersafetyprecautionslistedintheprintedversioncatalog.

2006.03.17P0610EMDD03VOL02E

ED2/EF2 SERIES

No part of this document may be copied or reproduced in any form or by any means without the prior written

consent of NEC/TOKIN Corporation. NEC/TOKIN Corporation assumes no responsibility for any errors which

may appear in this document.

NEC/TOKIN Corporation does not assume any liability for infringement of patents, copyrights or other

intellectual property rights of third parties by or arising from use of a device described herein or any other liability

arising from use of such device. No license, either express, implied or otherwise, is granted under any patents,

copyrights or other intellectual property rights of NEC/TOKIN Corporation or others. While NEC/TOKIN

Corporation has been making continuous effort to enhance the reliability of its electronic components, the

possibility of defects cannot be eliminated entirely. To minimize risks of damage or injury to persons or property

arising from a defect in an NEC/TOKIN electronic component, customers must incorporate sufficient safety

measures in its design, such as redundancy, fire-containment, and anti-failure features. NEC/TOKIN devices

are classified into the following three quality grades:

"Standard", "Special", and "Specific". The Specific quality grade applies only to devices developed based on a

customer designated "quality assurance program" for a specific application. The recommended applications of a

device depend on its quality grade, as indicated below. Customers must check the quality grade of each device

before using it in a particular application.

Standard: Computers, office equipment, communications equipment, test and measurement equipment,

audio and visual equipment, home electronic appliances, machine tools, personal electronic

equipment and industrial robots

Special: Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster

systems, anti-crime systems, safety equipment and medical equipment (not specifically designed

for life support)

Specific: Aircrafts, aerospace equipment, submersible repeaters, nuclear reactor control systems, life

support systems or medical equipment for life support, etc.

The quality grade of NEC/TOKIN devices is "Standard" unless otherwise specified in NEC/TOKIN's Data Sheets

or Data Books. If customers intend to use NEC/TOKIN devices for applications other than those specified for

Standard quality grade, they should contact an NEC/TOKIN sales representative in advance.

(Note)

(1) "NEC/TOKIN" as used in this statement means NEC/TOKIN Corporation and also includes its

majorityowned subsidiaries.

(2) "NEC/TOKIN electronic component products" means any electronic component product developed or

manufactured by or for NEC/TOKIN (as defined above).

DE0202