ABS1,4,5
27
TURQUOISE
SWITCHES
S TYPE (ABS)
HIGH ENVIRONMENTAL
RESISTANCE
FEATURES
• Subminiature size (19.8
×
11.1
×
6.4 mm) (.780
×
.437
×
.252 inch)
• Sealed construction for use in adverse environment-Sealed construction by ep-
oxy resin and rubber cap keeps off the cause of miscontact such as dust. Con-
forming to IP67* of IEC protective construction classification
• Elastomer double molding technology, an industry first and ultrasonic swaging
technology contribute to uniform sealing in high production quantities
• Expansion of low-level circuit type
• UL/CSA/VDE/SEMKO approved
(AS for gold-clad twin layer, VDE and SEMKO are not approved.)
*Based on the protective construction classification of IEC, items which satisfy the test
requirements are denoted with an IP designation.
TYPICAL APPLICATIONS
• Automotives
• Home appliances (vacuum cleaner, air purifier)
• Others (gas cookingrange, water vallet)
ORDERING INFORMATION
Type of
switch
ABS:
Turquoise switch
S type
Wire and
terminal position
1:
4:
5:
Straight type
Right angle
Left angle
Terminal
1:
4:
5:
6:
.110 quick-connect
terminal
Solder terminal
PC board terminal
Wire leads
Contact
arrangement
1:
2:
3:
SPDT
SPST-NC
SPST-NO
Actuator
0:
1:
2:
3:
4:
6:
8:
Pin plunger
Short hinge lever
Hinge lever
Long hinge lever
Simulated roller lever
Roller lever
Leaf lever
Operating force by
pin plunger (max.)
3:
4:
5:
0.74 N {75 gf}
(Gold-clad double
and triple layer
only)
0.98 N {100 gf}
1.47 N {150 gf}
Contact
0:
1:
4:
Silver-alloy
Gold-clad
triple layer
Gold-clad
double layer
Ex. ABS 1 1 1 0 4 0
Remarks: 1. Standard packing: Dust protected type 100 pcs./carton, 1,000 pcs./case; Immersion protected type 50 pcs./case.
2. SPST-NC and SPST-NO are only available for wire leads type.
3. Leaf lever is only available for wire leads type
4. As for wire position:
5. Not every combination is available. Please refer to the following table, “PRODUCT TYPES”.
Straight type Wire opposite to the
actuator side type
(Right angle)
Wire actuator side type
(Left angle)
ABS1,4,5
28
PRODUCT TYPES
1. Dust protected type
Silver alloy
Gold-clad triple layer
Gold-clad double layer
Remarks: When ordering UL/CSA approved types, please attach suffix “9" to the part number.
When ordering VDE/SEMKO approved types, please attach suffix “8" to the part number.
Actuator Operating force
Max. .110
quick-connect
terminal Solder terminal PC board terminal
Terminal position
Straight Right angle Left angle
Pin plunger 0.98 N {100 gf} ABS111040 ABS141040 ABS151040 ABS451040 ABS551040
1.47 N {150 gf} ABS111050 ABS141050 ABS151050 ABS451050 ABS551050
Short hinge lever 0.39 N {40 gf} ABS111140 ABS141140 ABS151140 ABS451140 ABS551140
0.59 N {60 gf} ABS111150 ABS141150 ABS151150 ABS451150 ABS551150
Hinge lever 0.34 N {35 gf} ABS111240 ABS141240 ABS151240 ABS451240 ABS551240
0.54 N {55 gf} ABS111250 ABS141250 ABS151250 ABS451250 ABS551250
Long hinge lever 0.25 N {25 gf} ABS111340 ABS141340 ABS151340 ABS451340 ABS551340
0.44 N {45 gf} ABS111350 ABS141350 ABS151350 ABS451350 ABS551350
Simulated roller lever 0.34 N {35 gf} ABS111440 ABS141440 ABS151440 ABS451440 ABS551440
0.54 N {55 gf} ABS111450 ABS141450 ABS151450 ABS451450 ABS551450
Roller lever 0.39 N {40 gf} ABS111640 ABS141640 ABS151640 ABS451640 ABS551640
0.59 N {60 gf} ABS111650 ABS141650 ABS151650 ABS451650 ABS551650
Actuator Operating force
Max. .110
quick-connect
terminal Solder terminal PC board terminal
Terminal position
Straight Right angle Left angle
Pin plunger 0.74 N {75 gf} ABS111031 ABS141031 ABS151031 ABS451031 ABS551031
0.98 N {100 gf} ABS111041 ABS141041 ABS151041 ABS451041 ABS551041
1.47 N {150 gf} ABS111051 ABS141051 ABS151051 ABS451051 ABS551051
Short hinge lever 0.29 N {30 gf} ABS111131 ABS141131 ABS151131 ABS451131 ABS551131
0.39 N {40 gf} ABS111141 ABS141141 ABS151141 ABS451141 ABS551141
0.59 N {60 gf} ABS111151 ABS141151 ABS151151 ABS451151 ABS551151
Hinge lever 0.27 N {28 gf} ABS111231 ABS141231 ABS151231 ABS451231 ABS551231
0.34 N {35 gf} ABS111241 ABS141241 ABS151241 ABS451241 ABS551241
0.54 N {55 gf} ABS111251 ABS141251 ABS151251 ABS451251 ABS551251
Long hinge lever 0.23 N {23 gf} ABS111331 ABS141331 ABS151331 ABS451331 ABS551331
0.25 N {25 gf} ABS111341 ABS141341 ABS151341 ABS451341 ABS551341
0.44 N {45 gf} ABS111351 ABS141351 ABS151351 ABS451351 ABS551351
Simulated roller lever 0.27 N {28 gf} ABS111431 ABS141431 ABS151431 ABS451431 ABS551431
0.34 N {35 gf} ABS111441 ABS141441 ABS151441 ABS451441 ABS551441
0.54 N {55 gf} ABS111451 ABS141451 ABS151451 ABS451451 ABS551451
Roller lever 0.29 N {30 gf} ABS111631 ABS141631 ABS151631 ABS451631 ABS551631
0.39 N {40 gf} ABS111641 ABS141641 ABS151641 ABS451641 ABS551641
0.59 N {60 gf} ABS111651 ABS141651 ABS151651 ABS451651 ABS551651
Actuator Operating force
Max. .110
quick-connect
terminal Solder terminal PC board terminal
Terminal position
Straight Right angle Left angle
Pin plunger 0.74 N {75 gf} ABS111034 ABS141034 ABS151034 ABS451034 ABS551034
0.98 N {100 gf} ABS111044 ABS141044 ABS151044 ABS451044 ABS551044
1.47 N {150 gf} ABS111054 ABS141054 ABS151054 ABS451054 ABS551054
Short hinge lever 0.29 N {30 gf} ABS111134 ABS141134 ABS151134 ABS451134 ABS551134
0.39 N {40 gf} ABS111144 ABS141144 ABS151144 ABS451144 ABS551144
0.59 N {60 gf} ABS111154 ABS141154 ABS151154 ABS451154 ABS551154
Hinge lever 0.27 N {28 gf} ABS111234 ABS141234 ABS151234 ABS451234 ABS551234
0.34 N {35 gf} ABS111244 ABS141244 ABS151244 ABS451244 ABS551244
0.54 N {55 gf} ABS111254 ABS141254 ABS151254 ABS451254 ABS551254
Long hinge lever 0.23 N {23 gf} ABS111334 ABS141334 ABS151334 ABS451334 ABS551334
0.25 N {25 gf} ABS111344 ABS141344 ABS151344 ABS451344 ABS551344
0.44 N {45 gf} ABS111354 ABS141354 ABS151354 ABS451354 ABS551354
Simulated roller lever 0.27 N {28 gf} ABS111434 ABS141434 ABS151434 ABS451434 ABS551434
0.34 N {35 gf} ABS111444 ABS141444 ABS151444 ABS451444 ABS551444
0.54 N {55 gf} ABS111454 ABS141454 ABS151454 ABS451454 ABS551454
Roller lever 0.29 N {30 gf} ABS111634 ABS141634 ABS151634 ABS451634 ABS551634
0.39 N {40 gf} ABS111644 ABS141644 ABS151644 ABS451644 ABS551644
0.59 N {60 gf} ABS111654 ABS141654 ABS151654 ABS451654 ABS551654
ABS1,4,5
29
2. Immersion protected type (3 wire leads type SPDT)
Silver alloy
Gold-clad triple layer
Gold-clad double layer
Remarks: When ordering UL/CSA approved types, please attach suffix “9" to the part number.
When ordering VDE/SEMKO approved types, please attach suffix “8" to the part number.
Actuator Operating force
Max.
SPDT
Wire position
Straight Right angle Left angle
Pin plunger 0.98 N {100 gf} ABS161040 ABS461040 ABS561040
1.47 N {150 gf} ABS161050 ABS461050 ABS561050
Short hinge lever 0.39 N {40 gf} ABS161140 ABS461140 ABS561140
0.59 N {60 gf} ABS161150 ABS461150 ABS561150
Hinge lever 0.34 N {35 gf} ABS161240 ABS461240 ABS561240
0.54 N {55 gf} ABS161250 ABS461250 ABS561250
Long hinge lever 0.25 N {25 gf} ABS161340 ABS461340 ABS561340
0.44 N {45 gf} ABS161350 ABS461350 ABS561350
Simulated roller lever 0.34 N {35 gf} ABS161440 ABS461440 ABS561440
0.54 N {55 gf} ABS161450 ABS461450 ABS561450
Roller lever 0.39 N {40 gf} ABS161640 ABS461640 ABS561640
0.59 N {60 gf} ABS161650 ABS461650 ABS561650
Actuator Operating force
Max.
SPDT
Wire position
Straight Right angle Left angle
Pin plunger 0.74 N {75 gf} ABS161031 ABS461031 ABS561031
0.98 N {100 gf} ABS161041 ABS461041 ABS561041
1.47 N {150 gf} ABS161051 ABS461051 ABS561051
Short hinge lever 0.29 N {30 gf} ABS161131 ABS461131 ABS561131
0.39 N {40 gf} ABS161141 ABS461141 ABS561141
0.59 N {60 gf} ABS161151 ABS461151 ABS561151
Hinge lever 0.27 N {28 gf} ABS161231 ABS461231 ABS561231
0.34 N {35 gf} ABS161241 ABS461241 ABS561241
0.54 N {55 gf} ABS161251 ABS461251 ABS561251
Long hinge lever 0.23 N {23 gf} ABS161331 ABS461331 ABS561331
0.25 N {25 gf} ABS161341 ABS461341 ABS561341
0.44 N {45 gf} ABS161351 ABS461351 ABS561351
Simulated roller lever 0.27 N {28 gf} ABS161431 ABS461431 ABS561431
0.34 N {35 gf} ABS161441 ABS461441 ABS561441
0.54 N {55 gf} ABS161451 ABS461451 ABS561451
Roller lever 0.29 N {30 gf} ABS161631 ABS461631 ABS561631
0.39 N {40 gf} ABS161641 ABS461641 ABS561641
0.59 N {60 gf} ABS161651 ABS461651 ABS561651
Actuator Operating force
Max.
SPDT
Wire position
Straight Right angle Left angle
Pin plunger 0.74 N {75 gf} ABS161034 ABS461034 ABS561034
0.98 N {100 gf} ABS161044 ABS461044 ABS561044
1.47 N {150 gf} ABS161054 ABS461054 ABS561054
Short hinge lever 0.29 N {30 gf} ABS161134 ABS461134 ABS561134
0.39 N {40 gf} ABS161144 ABS461144 ABS561144
0.59 N {60 gf} ABS161154 ABS461154 ABS561154
Hinge lever 0.27 N {28 gf} ABS161234 ABS461234 ABS561234
0.34 N {35 gf} ABS161244 ABS461244 ABS561244
0.54 N {55 gf} ABS161254 ABS461254 ABS561254
Long hinge lever 0.23 N {23 gf} ABS161334 ABS461334 ABS561334
0.25 N {25 gf} ABS161344 ABS461344 ABS561344
0.44 N {45 gf} ABS161354 ABS461354 ABS561354
Simulated roller lever 0.27 N {28 gf} ABS161434 ABS461434 ABS561434
0.34 N {35 gf} ABS161444 ABS461444 ABS561444
0.54 N {55 gf} ABS161454 ABS461454 ABS561454
Roller lever 0.29 N {30 gf} ABS161634 ABS461634 ABS561634
0.39 N {40 gf} ABS161644 ABS461644 ABS561644
0.59 N {60 gf} ABS161654 ABS461654 ABS561654
ABS1,4,5
30
3. Immersion protected type (2 wire leads type SPST-NC)
Silver alloy
Gold-clad triple layer
Gold-clad double layer
Remarks: When ordering UL/CSA approved types, please attach suffix “9" to the part number.
When ordering VDE/SEMKO approved types, please attach suffix “8" to the part number.
Actuator Operating force
Max.
SPST-NC
Wire position
Straight Right angle Left angle
Pin plunger 0.98 N {100 gf} ABS162040 ABS462040 ABS562040
1.47 N {150 gf} ABS162050 ABS462050 ABS562050
Short hinge lever 0.39 N {40 gf} ABS162140 ABS462140 ABS562140
0.59 N {60 gf} ABS162150 ABS462150 ABS562150
Hinge lever 0.34 N {35 gf} ABS162240 ABS462240 ABS562240
0.54 N {55 gf} ABS162250 ABS462250 ABS562250
Long hinge lever 0.25 N {25 gf} ABS162340 ABS462340 ABS562340
0.44 N {45 gf} ABS162350 ABS462350 ABS562350
Simulated roller lever 0.34 N {35 gf} ABS162440 ABS462440 ABS562440
0.54 N {55 gf} ABS162450 ABS462450 ABS562450
Roller lever 0.39 N {40 gf} ABS162640 ABS462640 ABS562640
0.59 N {60 gf} ABS162650 ABS462650 ABS562650
Actuator Operating force
Max.
SPST-NC
Wire position
Straight Right angle Left angle
Pin plunger 0.74 N {75 gf} ABS162031 ABS462031 ABS562031
0.98 N {100 gf} ABS162041 ABS462041 ABS562041
1.47 N {150 gf} ABS162051 ABS462051 ABS562051
Short hinge lever 0.29 N {30 gf} ABS162131 ABS462131 ABS562131
0.39 N {40 gf} ABS162141 ABS462141 ABS562141
0.59 N {60 gf} ABS162151 ABS462151 ABS562151
Hinge lever 0.27 N {28 gf} ABS162231 ABS462231 ABS562231
0.34 N {35 gf} ABS162241 ABS462241 ABS562241
0.54 N {55 gf} ABS162251 ABS462251 ABS562251
Long hinge lever 0.23 N {23 gf} ABS162331 ABS462331 ABS562331
0.25 N {25 gf} ABS162341 ABS462341 ABS562341
0.44 N {45 gf} ABS162351 ABS462351 ABS562351
Simulated roller lever 0.27 N {28 gf} ABS162431 ABS462431 ABS562431
0.34 N {35 gf} ABS162441 ABS462441 ABS562441
0.54 N {55 gf} ABS162451 ABS462451 ABS562451
Roller lever 0.29 N {30 gf} ABS162631 ABS462631 ABS562631
0.39 N {40 gf} ABS162641 ABS462641 ABS562641
0.59 N {60 gf} ABS162651 ABS462651 ABS562651
Actuator Operating force
Max.
SPST-NC
Wire position
Straight Right angle Left angle
Pin plunger 0.74 N {75 gf} ABS162034 ABS462034 ABS562034
0.98 N {100 gf} ABS162044 ABS462044 ABS562044
1.47 N {150 gf} ABS162054 ABS462054 ABS562054
Short hinge lever 0.29 N {30 gf} ABS162134 ABS462134 ABS562134
0.39 N {40 gf} ABS162144 ABS462144 ABS562144
0.59 N {60 gf} ABS162154 ABS462154 ABS562154
Hinge lever 0.27 N {28 gf} ABS162234 ABS462234 ABS562234
0.34 N {35 gf} ABS162244 ABS462244 ABS562244
0.54 N {55 gf} ABS162254 ABS462254 ABS562254
Long hinge lever 0.23 N {23 gf} ABS162334 ABS462334 ABS562334
0.25 N {25 gf} ABS162344 ABS462344 ABS562344
0.44 N {45 gf} ABS162354 ABS462354 ABS562354
Simulated roller lever 0.27 N {28 gf} ABS162434 ABS462434 ABS562434
0.34 N {35 gf} ABS162444 ABS462444 ABS562444
0.54 N {55 gf} ABS162454 ABS462454 ABS562454
Roller lever 0.29 N {30 gf} ABS162634 ABS462634 ABS562634
0.39 N {40 gf} ABS162644 ABS462644 ABS562644
0.59 N {60 gf} ABS162654 ABS462654 ABS562654
ABS1,4,5
31
4. Immersion protected type (2 wire leads type SPST-NO)
Silver alloy
Gold-clad triple layer
Gold-clad double layer
Remarks: When ordering UL/CSA approved types, please attach suffix “9" to the part number.
When ordering VDE/SEMKO approved types, please attach suffix “8" to the part number.
Actuator Operating force
Max.
SPST-NO
Wire position
Straight Right angle Left angle
Pin plunger 0.98 N {100 gf} ABS163040 ABS463040 ABS563040
1.47 N {150 gf} ABS163050 ABS463050 ABS563050
Short hinge lever 0.39 N {40 gf} ABS163140 ABS463140 ABS563140
0.59 N {60 gf} ABS163150 ABS463150 ABS563150
Hinge lever 0.34 N {35 gf} ABS163240 ABS463240 ABS563240
0.54 N {55 gf} ABS163250 ABS463250 ABS563250
Long hinge lever 0.25 N {25 gf} ABS163340 ABS463340 ABS563340
0.44 N {45 gf} ABS163350 ABS463350 ABS563350
Simulated roller lever 0.34 N {35 gf} ABS163440 ABS463440 ABS563440
0.54 N {55 gf} ABS163450 ABS463450 ABS563450
Roller lever 0.39 N {40 gf} ABS163640 ABS463640 ABS563640
0.59 N {60 gf} ABS163650 ABS463650 ABS563650
Actuator Operating force
Max.
SPST-NO
Wire position
Straight Right angle Left angle
Pin plunger 0.74 N {75 gf} ABS163031 ABS463031 ABS563031
0.98 N {100 gf} ABS163041 ABS463041 ABS563041
1.47 N {150 gf} ABS163051 ABS463051 ABS563051
Short hinge lever 0.29 N {30 gf} ABS163131 ABS463131 ABS563131
0.39 N {40 gf} ABS163141 ABS463141 ABS563141
0.59 N {60 gf} ABS163151 ABS463151 ABS563151
Hinge lever 0.27 N {28 gf} ABS163231 ABS463231 ABS563231
0.34 N {35 gf} ABS163241 ABS463241 ABS563241
0.54 N {55 gf} ABS163251 ABS463251 ABS563251
Long hinge lever 0.23 N {23 gf} ABS163331 ABS463331 ABS563331
0.25 N {25 gf} ABS163341 ABS463341 ABS563341
0.44 N {45 gf} ABS163351 ABS463351 ABS563351
Simulated roller lever 0.27 N {28 gf} ABS163431 ABS463431 ABS563431
0.34 N {35 gf} ABS163441 ABS463441 ABS563441
0.54 N {55 gf} ABS163451 ABS463451 ABS563451
Roller lever 0.29 N {30 gf} ABS163631 ABS463631 ABS563631
0.39 N {40 gf} ABS163641 ABS463641 ABS563641
0.59 N {60 gf} ABS163651 ABS463651 ABS563651
Actuator Operating force
Max.
SPST-NO
Wire position
Straight Right angle Left angle
Pin plunger 0.74 N {75 gf} ABS163034 ABS463034 ABS563034
0.98 N {100 gf} ABS163044 ABS463044 ABS563044
1.47 N {150 gf} ABS163054 ABS463054 ABS563054
Short hinge lever 0.29 N {30 gf} ABS163134 ABS463134 ABS563134
0.39 N {40 gf} ABS163144 ABS463144 ABS563144
0.59 N {60 gf} ABS163154 ABS463154 ABS563154
Hinge lever 0.27 N {28 gf} ABS163234 ABS463234 ABS563234
0.34 N {35 gf} ABS163244 ABS463244 ABS563244
0.54 N {55 gf} ABS163254 ABS463254 ABS563254
Long hinge lever 0.23 N {23 gf} ABS163334 ABS463334 ABS563334
0.25 N {25 gf} ABS163344 ABS463344 ABS563344
0.44 N {45 gf} ABS163354 ABS463354 ABS563354
Simulated roller lever 0.27 N {28 gf} ABS163434 ABS463434 ABS563434
0.34 N {35 gf} ABS163444 ABS463444 ABS563444
0.54 N {55 gf} ABS163454 ABS463454 ABS563454
Roller lever 0.29 N {30 gf} ABS163634 ABS463634 ABS563634
0.39 N {40 gf} ABS163644 ABS463644 ABS563644
0.59 N {60 gf} ABS163654 ABS463654 ABS563654
ABS1,4,5
32
5. Immersion protected type (3 wire leads type SPDT)
• Leaf lever type
Silver alloy
Gold-clad triple layer
Gold-clad double layer
6. Immersion protected type (2 wire leads type SPST-NC)
• Leaf lever type
Silver alloy
Gold-clad triple layer
Gold-clad double layer
7. Immersion protected type (2 wire leads type SPST-NO)
• Leaf lever type
Silver alloy
Gold-clad triple layer
Remarks: When ordering UL/CSA approved types, please attach suffix “9" to the part number.
When ordering VDE/SEMKO approved types, please attach suffix “8" to the part number.
Actuator Operating force
Max.
SPDT
Wire position
Straight Right angle Left angle
Leaf lever 0.88 N {90 gf} ABS161840 ABS461840 ABS561840
1.08 N {110 gf} ABS161850 ABS461850 ABS561850
Actuator Operating force
Max.
SPDT
Wire position
Straight Right angle Left angle
Leaf lever 0.74 N {75 gf} ABS161831 ABS461831 ABS561831
0.88 N {90 gf} ABS161841 ABS461841 ABS561841
1.08 N {110 gf} ABS161851 ABS461851 ABS561851
Actuator Operating force
Max.
SPDT
Wire position
Straight Right angle Left angle
Leaf lever 0.74 N {75 gf} ABS161834 ABS461834 ABS561834
0.88 N {90 gf} ABS161844 ABS461844 ABS561844
1.08 N {110 gf} ABS161854 ABS461854 ABS561854
Actuator Operating force
Max.
SPST-NC
Wire position
Straight Right angle Left angle
Leaf lever 0.88 N {90 gf} ABS162840 ABS462840 ABS562840
1.08 N {110 gf} ABS162850 ABS462850 ABS562850
Actuator Operating force
Max.
SPST-NC
Wire position
Straight Right angle Left angle
Leaf lever 0.74 N {75 gf} ABS162831 ABS462831 ABS562831
0.88 N {90 gf} ABS162841 ABS462841 ABS562841
1.08 N {110 gf} ABS162851 ABS462851 ABS562851
Actuator Operating force
Max.
SPST-NC
Wire position
Straight Right angle Left angle
Leaf lever 0.74 N {75 gf} ABS162834 ABS462834 ABS562834
0.88 N {90 gf} ABS162844 ABS462844 ABS562844
1.08 N {110 gf} ABS162854 ABS462854 ABS562854
Actuator Operating force
Max.
SPST-NO
Wire position
Straight Right angle Left angle
Leaf lever 0.88 N {90 gf} ABS163840 ABS463840 ABS563840
1.08 N {110 gf} ABS163850 ABS463850 ABS563850
Actuator Operating force
Max.
SPST-NO
Wire position
Straight Right angle Left angle
Leaf lever 0.74 N {75 gf} ABS163831 ABS463831 ABS563831
0.88 N {90 gf} ABS163841 ABS463841 ABS563841
1.08 N {110 gf} ABS163851 ABS463851 ABS563851
ABS1,4,5
33
Gold-clad double layer
Remarks: When ordering UL/CSA approved types, please attach suffix “9" to the part number.
When ordering VDE/SEMKO approved types, please attach suffix “8" to the part number.
Actuator Operating force
Max. gf oz
SPST-NO
Wire position
Straight Right angle Left angle
Leaf lever 0.74 N {75 gf} ABS163834 ABS463834 ABS563834
0.89 N {90 gf} ABS163844 ABS463844 ABS563844
1.08 N {110 gf} ABS162854 ABS462854 ABS562854
SPECIFICATIONS
1. Contact rating
Low-level circuit rating (Gold-clad contact type)
Voltage Silver alloy contact type Gold-clad contact type
Gold-clad
triple layer Gold-clad
twin layer
Resistive load Inductive load Resistive load
125 V AC 2 A 2 A 0.1 A —
250 V AC 2 A 2 A 0.1 A —
30 V DC 2 A 2 A 0.1 A 0.1 A
125 V DC 0.4 A 0.05 A — —
Rated voltage Resistive load
6 V DC 5 mA
12 V DC 2 mA
24 V DC 1 mA
Recommended contact material chart
classified by load voltage & current
Remarks: If the contact is being used in the constant
low-level circuit load range, the gold-clad
twin lay er contact is recommended. If there
is a danger of the current being less than
0.5 A, for instance if the contact is being
turned on and off, the gold-clad triple lay er
type is recommended.
Silver-alloy
Gold-clad double layer
2A
100mA
1mA
0DC
AC 5
515 30V
30 250V
Gold-clad triple layer
2. Characteristics
3. Operating characteristics
Mechanical life
(O.T.: Specified value) Leaf lever Min. 5x10
5
(at 60 cpm)
Other types Min. 5x10
6
(at 60 cpm)
Electrical life at rated load
(O.T.: Max.) Silver alloy contact type Min. 5x10
4
(at 20 cpm)
Gold-clad contact type Min. 2x10
5
(at 20 cpm)
Insulation resistance Min. 100 M
Ω
(at 500 V DC insulation resistance meter)
Dielectric strength
Between non-continuous terminals
Between each terminal and other exposed metal parts
Between each terminal and ground
1,000 Vrms
1,500 Vrms
1,500 Vrms
Vibration resistance (Pin plunger type) 10 to 55 Hz at single amplitude of 0.75 mm (Contact opening Max. 1 msec.)
Shock resistance (Pin plunger type) Min. 294 m/s
2
{30 G} (Contact opening Max. 1 msec.)
Contact resistance (Initial) Silver alloy contact type Dust protected type (IP50): Max. 50 m
Ω
Immersion protected type (IP67): Max. 100 m
Ω
(By voltage drop 1 A 6 to 8 V DC)
Gold-clad contact type Dust protected type (IP50): Max. 100 m
Ω
Immersion protected type (IP67): Max. 150 m
Ω
(By voltage drop 0.1 A 6 to 8 V DC)
Allowable operating speed (at no load) 0.1 to 500 mm/sec.
Max. operating cycle rate (at no load) 120 cpm
Ambient temperature –40
°
C to +85
°
C –40
°
F to +185
°
F
Ambient humidity Max. 95% R.H.
Unit weight Approx. 2 g .071 oz (IP50 type)
Type of actuator Operating force, Max. Release force, Min. Pretrav el, Max.
mm inch Mov ement
differential,
Max. mm inch Overtravel,
Min. mm inch Operating
position,
mm inch
Pin plunger 0.74N
{75gf} 0.98N
{100gf} 1.47N
{150gf} 0.098N
{10gf} 0.15N
{15gf} 0.20N
{20gf} 0.6
.024 0.1
.004 0.4
.016 8.4
±
0.3
.331
±
.012
Short hinge lever 0.29N
{30gf} 0.39N
{40gf} 0.59N
{60gf} 0.020N
{2.0gf} 0.034N
{3.5gf} 0.039N
{4.0gf} 2.5
.098 0.5
.020 0.8
.031 8.8
±
0.8
.346
±
.031
Hinge lever 0.27N
{28gf} 0.34N
{35gf} 0.54N
{55gf} 0.017N
{1.70gf} 0.029N
{3.0gf} 0.034N
{3.5gf} 2.8
.110 0.8
.031 1.2
.047 8.8
±
0.8
.346
±
.031
Long hinge lever 0.23N
{23gf} 0.25N
{25gf} 0.44N
{45gf} 0.015N
{1.5gf} 0.025N
{2.5gf} 0.029N
{3.0gf} 3.5
.138 1.0
.039 1.6
.063 8.8
±
1.2
.346
±
.047
Simulated roller lever 0.27N
{28gf} 0.34N
{35gf} 0.54N
{55gf} 0.017N
{1.7gf} 0.029N
{3.0gf} 0.034N
{3.5gf} 2.8
.110 0.8
.031 1.2
.047 11.65
±
0.8
.459
±
.031
Roller lever 0.29N
{30gf} 0.39N
{40gf} 0.59N
{60gf} 0.020N
{2.0gf} 0.034N
{3.5gf} 0.039N
{4.0gf} 2.5
.098 0.5
.020 0.8
.031 14.5
±
0.8
.571
±
.031
Leaf lever 0.74N
{75gf} 0.88N
{90gf} 1.08N
{110gf} 0.15N
{15gf} 0.17N
{17gf} 0.20N
{20gf} 4.5
.177 1.0
.039 2.5
.098 14.5
±
1.5
.571
±
.059
ABS1,4,5
34
DIMENSIONS
1. Dust protected type
1-(1) .110 quick-connect terminal
Pin plunger
mm inch General tolerance:
±
0.25
±
.010
.299±.012
7.6±0.3
3.4±0.1
.134±.004
.433
11
.280±.006
7.1±0.15
5.5±0.1
.217±.004
1.2±0.05 dia.
.047±.002 dia.
.094
2.4
.303
7.7
+0.1
−0.05
−.002
+.004
.094
2.4
.004
2.5±0.1
.098±
.780±.012
19.8±0.3
7.6±0.15
.299±.006 7.6±0.15
.299±.006
.374±.004
9.5±0.1 4.157
.110±.004
2.8±0.1 C0.6
Position
Operating
.331±.012
8.4±0.3
11.8±0.4
.465±.016
.264
6.7
0.6 max.
.024 max.
Pretravel
6.4±0.2
.252±.008
1.7 dia.
.067 dia.
+.004
−0.05
−.002
+0.1
2.4
.094 dia.
dia.
Pretravel, Max. mm inch 0.6 .024
Movement differential,
Max. mm inch 0.1 .004
Overtravel, Min. mm inch 0.4 .016
Operating
position
Distance from
mounting hole,
mm inch
8.4
±
0.3
.331
±
.012
Distance from
stand-off,
mm inch
11.8
±
0.4
.465
±
.016
Short hinge lever
.197±.016
5±0.4
R18
.709 Pretravel
12.85
.506
.248
6.3
.157
4
(.146)
(3.7)
.346±.031
Position
8.8±0.8
Operating
.480±.035
12.2±0.9
2.5 max.
.098 max.
Pretravel, Max. mm inch 2.5 .098
Movement differential,
Max. mm inch 0.5 .020
Overtravel, Min. mm inch 0.8 .031
Operating
position
Distance from
mounting hole,
mm inch
8.8
±
0.8
.346
±
.031
Distance from
stand-off,
mm inch
12.2
±
0.9
.480
±
.035
Hinge lever
.157
4
(.146)
(3.7)
8.8±0.8
12.2±0.9
.480±.035
.346±.031
.281±.016
7.15±0.4
R20.2
.795
Operating
2.8 max.
.110 max.
Pretravel
Position
Pretravel, Max. mm inch 2.8 .110
Movement differential,
Max. mm inch 0.8 .031
Overtravel, Min. mm inch 1.2 .047
Operating
position
Distance from
mounting hole,
mm inch
8.8
±
0.8
.346
±
.031
Distance from
stand-off,
mm inch
12.2
±
0.9
.480
±
.035
Long hinge lever
.157
4
(.138)
(3.5)
3.5 max.
Position
Operating
.346±.047
8.8±1.2
1.028
R26.1 .138 max.
Pretravel
.516±.016
13.1±0.4
.480±.051
12.2±1.3
Pretravel, Max. mm inch 3.5 .138
Movement differential,
Max. mm inch 1 .039
Overtravel, Min. mm inch 1.6 .063
Operating
position
Distance from
mounting hole,
mm inch
8.8
±
1.2
.346
±
.047
Distance from
stand-off,
mm inch
12.2
±
1.3
.480
±
.051
ABS1,4,5
35
Simulated roller lever
mm inch General tolerance:
±
0.25
±
.010
2.8 max.
.110 max.
Pretravel
.459±.031
11.65±0.8
Operating
Position
15.05±0.9
.593±.035
.098
R2.5
.783
R19.9 .157
4
(.138)
(3.5)
.248±.016
6.3±0.4
Pretravel, Max. mm inch 2.8 .110
Movement differential,
Max. mm inch 0.8 .031
Overtravel, Min. mm inch 1.2 .047
Operating
position
Distance from
mounting hole,
mm inch
11.65
±
0.8
.459
±
.031
Distance from
stand-off,
mm inch
15.05
±
0.9
.593
±
.035
Roller lever
.126
3.2
.197
5 dia.
Pretravel
2.5 max.
.098 max.
.203±.016
5.15±0.4
.705±.035
17.9±0.9
Operating
Position
14.5±0.8
.571±.031
.744
R18.9
Pretravel, Max. mm inch 2.5 .098
Movement differential,
Max. mm inch 0.5 .020
Overtravel, Min. mm inch 0.8 .031
Operating
position
Distance from
mounting hole,
mm inch
14.5
±
0.8
.571
±
.031
Distance from
stand-off,
mm inch
17.9
±
0.9
.705
±
.035
1-(2) Solder terminal
3.4±0.15
.134±.006
2.5±0.1
.098±.004 .374±.004
9.5±0.1
8.7±0.15
.343±.006 15.4±0.15
.606±.006
.110±.008
2.8±0.2
19.8±0.3
.780±.012
+.004
-.002
-0.05
+0.1
2.4
.094 dia.
dia.
+.004
+0.1
-.002
-0.05
2.4
.094
.094
2.4
.094
2.4
.075
1.9
7.4
.291
1.1±0.12
.043±.005
.059±.005
1.5±0.12
.020
0.5
1.85±0.2
.073±.008 1.25±0.1
.059±.004
.205
5.2
.252±.008
6.4±0.2
Remarks: Dimensions of the actuator types are
the same as those of corresponding
.110 quick-connect terminal types.
1-(3) PC board terminal
Straight type
1.1±0.12
.043±.005
.059±.005
1.5±0.12
.020
0.5
1.85±0.2
.073±.008 1.25±0.1
.059±.004
.205
5.2
.252±.008
6.4±0.2
.291
.343±.006
8.7±0.15
.098±.004
2.5±0.1
.606±.006
15.4±0.15
.780±.012
19.8±0.3
9.5±0.1
.374±.004 2.2
.087
dia.
dia.
+0.1
-0.05
-.002
+.004
.094
2.4
.134±.006
3.4±0.15
+0.1
.094
2.4
7.4 2.4
.094
-0.05
-.002
+.004
0.9
.035
8.7±0.1
.343±.004
15.4±0.1
.606±.004
1.2±0.05 dia.
.047±.002 dia.
Remarks: Dimensions of the actuator types are
the same as those of corresponding
.110 quick-connect terminal types.
ABS1,4,5
36
Right angle type
mm inch General tolerance:
±
0.25
±
.010
.300±.006
7.62±0.15 .300±.006
7.62±0.15 .020
0.5
.043±.005
5.08±0.2
.252
6.4
7.62±0.1
.300±.004
3-1.5±0.05 dia.
3-.059±.002 dia.
7.62±0.1
.300±.004
Remarks: Dimensions of the actuator types are
the same as those of corresponding
.110 quick-connect terminal types.
Left angle type
5.08±0.2
0.5
.020
.043±.005
.252
6.4
.300±.006
7.62±0.15 .051
.300±.006
7.62±0.15 1.3
.300±.006
7.62±0.15 7.62±0.15
.300±.006
(.110)
(2.8)
.051
1.3
3.2
.126
6.4
.252
6-C0.3
7.62±0.1
.300±.004
3-1.5±0.05 dia.
3-.059±.002 dia.
7.62±0.1
.300±.004
Remarks: Dimensions of the actuator types are
the same as those of corresponding
.110 quick-connect terminal types.
2. Immersion protected type
Wire leads
Pin plunger
Straight type
COM NO NC
21.2
.835
.362
9.2
11.811±.394
300±10
.197±.079
5±2
dia.
dia.
-0.05
-.002
+.004
+0.1
2.4
.094
.252
6.4
Thickness of the lead wire: 0.5 mm
2
UL/CSA approv ed type and Right/Left angle type:
AWG #20
Color of the lead wire:
COM...Black
N.C. ... Red
N.O. ... White
Remarks: 1.Other dimensions are the same as those of
.110 quick-connect terminal types.
2.Dimensions of the actuator types are the
same as those of corresponding .110 quick-
connect terminal types.
Right angle type Left angle type
5±2
.179±079
11.811±394
300±10
5±2
.197±.079
11.811±.394
300±10
ABS1,4,5
37
Leaf lever
Straight type
mm inch General tolerance:
±
0.25
±
.010
.177 max.
Pretravel
4.5 max.
.059
1.5
Free Position
(.650)(16.5)
.571±.05914.5±1.5
Operating Position
Totaltravel Position
(.413)(10.5 min.)
.299±.012
7.6±0.3 .315±.039
8±1
.937±.016
23.8±0.4
.197±.079
5±2
11.811±.394
300±10
2.4
.094 dia.
dia.
-.002
+.004
-0.05
+0.1
.197
5
.252
6.4
7.7
.303
.331
8.4 .331
8.4
.098±.004
2.5±0.1
Thickness of the lead wire: 0.5 mm
2
UL/CSA approv ed type and Right/Left angle type:
AWG #20
Color of the lead wire:
COM...Black
N.C. ...Red
N.O. ...White
Right angle type Left angle type
.197
5
6.4
.252
11.881±.394
300±10
.197±.079
5±2
.197
5
6.4
.252 11.881±.394
300±10
.197±.079
5±2
