DC/DC Converters TEN 10 Series, 10 Watt Features Wide 2:1 input range High power density Operating temperature range nded fo me om not rec esign d w e n r in UL 60950-1 -40C to +85C Indefinite short circuit protection I/O isolation 1500 VDC Input filter to meet EN 55022, Class A and FCC, level A without external components Industry standard pinout Shielded metal case with insulated baseplate High reliability, MTBF >1 Mio. h 3-year product warranty The TEN 10 series is a family of high performance 10W DC/DC converters in a compact 2" x 1" low profile package with industry standard footprint. A high efficiency allows a wide operating temperature range of -40C to +85C. A built-in EMI filter is built in to meet EN 55022, class A without any external components. Further standard features include over voltage protection and short-circuit protection. Typical applications for these converters are battery operated equipment, instrumentation, distributed power architectures in communication and industrial electronics, everywhere where isolated, tightly regulated voltages are required. Models Order code TEN 10-1210 TEN 10-1211 TEN 10-1212 TEN 10-1213 TEN 10-1215 TEN 10-1221 TEN 10-1222 TEN 10-1223 TEN 10-2410 TEN 10-2411 TEN 10-2412 TEN 10-2413 TEN 10-2415 TEN 10-2421 TEN 10-2422 TEN 10-2423 TEN 10-4810 TEN 10-4811 TEN 10-4812 TEN 10-4813 TEN 10-4815 TEN 10-4821 TEN 10-4822 TEN 10-4823 http://www.tracopower.com Input voltage range 9 - 18 VDC (12 VDC nominal) 18 - 36 VDC (24 VDC nominal) 36 - 75 VDC (48 VDC nomial) Output voltage 3.3 VDC 5 VDC 12 VDC 15 VDC 24 VDC 5 VDC 12 VDC 15 VDC 3.3 VDC 5 VDC 12 VDC 15 VDC 24 VDC 5 VDC 12 VDC 15 VDC 3.3 VDC 5 VDC 12 VDC 15 VDC 24 VDC 5 VDC 12 VDC 15 VDC Output current max. 2'400 mA 2`000 mA 830 mA 670 mA 415 mA 1`000 mA 415 mA 330 mA 2'400 mA 2`000 mA 830 mA 670 mA 415 mA 1`000 mA 415 mA 330 mA 2`400 mA 2`000 mA 830 mA 670 mA 415 mA 1`000 mA 415 mA 330 mA Efficiency typ. 72 % 77 % 80 % 80 % 81 % 78 % 81 % 80 % 76 % 78 % 82 % 82 % 83 % 80 % 82 % 82 % 76 % 80 % 82 % 83 % 83 % 81 % 83 % 83 % Page 1 of 4 DC/DC Converters TEN 10 Series 10 Watt Input Specifications Input current at no load 12 Vin models: 30 mA typ. 24 Vin models: 20 mA typ. 48 Vin models: 10 mA typ. Input current at full load 12 Vin; 3.3 VDC 12 Vin; 5 & 5 VDC 12 Vin; other output 24 Vin; 3.3 VDC 24 Vin; 5 & 5 VDC 24 Vin; other output 48 Vin; 3.3 VDC 48 Vin; 5 & 5 VDC 48 Vin; other output models: models: models: models: models: models: models: models: models: 915 mA typ. 1080 mA typ. 1045 mA typ. 435 mA typ. 530 mA typ. 510 mA typ. 215 mA typ. 260 mA typ. 250 mA typ. Start-up voltage / under voltage shut down 12 Vin models: 8.5 VDC / 8 VDC 24 Vin models: 16.5 VDC / 16 VDC 48 Vin models: 32.5 VDC / 32 VDC Surge voltage (1 sec. max.) 12 Vin models: 25 V max. 24 Vin models: 50 V max. 48 Vin models: 100 V max. Reserve voltage protection 1.0 A max. Conducted noise (input) EN 55022 level A, FCC part 15, level A Output Specifications Voltage set accuracy 1 % Regulation - Input variation Vin min. to Vin max. 0.3 % max. - Load variation 10 % - 90 % single output models: 0.5 % max. dual output models: 1 % max. (balanced load) dual output models: 3 % max. (unbalanced load) Ripple and noise (20 MHz Bandwidth) single output models: 50 mVpk-pk max. dual output models: 75 mVpk-pk max. Temperature coefficient 0.02 %/K Output current limitation >110 % of lout max., constant current Short circuit protection continuous (automatic recovery) Capacitive load single output models: 2200 F max. dual output models: 470 F max. General Specifications Temperature ranges - Operating -40C to +85C - Case temperature +100C max. - Storage -40C to +125C Derating (convection cooling) 3.3 %/K above 70C Humidity (non condensing) 95 % rel H max. Reliability, calculated MTBF (MIL-HDBK-217F, at +25C, ground benign) >1 Mio h Isolation (Input/Output) - Voltage 1`500 VDC - Capacitance 120 pF max. - Resistance >1`000 M Ohm Switching frequency single output models: 500 kHz typ. (pulse width modulation) dual output models: 300 kHz typ. (pulse width modulation) All specifications valid at nominal input voltage, full load and +25C after warm-up time unless otherwise stated. http://www.tracopower.com Page 2 of 4 DC/DC Converters TEN 10 Series 10 Watt General Specifications EMC immunity - - - - - Electrostatic discharge ESD RF field susceptibility Electrical fast transient / burst immunity input Surge immunity Immunity to conducted RF disturbances EN 61000-4-2 EN 61000-4-3 EN 61000-4-4 EN 61000-4-5 EN 61000-4-6 8 kV / 6 kV, criteria B 10 V/m, criteria A 2 kV, criteria B 1 kV, criteria B 10 Vrms, criteria A Thermal shock, mechanical shock & vibration EN 61373, MIL-STD-810F - Test conditions www.tracopower.com/products/mil810.pdf Safety standards UL 60950-1, IEC / EN 60950-1 Safety approvals - UL/cUL www.ul.com -> certifications -> File e188913 Environmental compliance - Reach www.tracopower.com/products/ten10-reach.pdf - RoHS directive 2011/65/EU Physical Specifications Casing material Steel chrome-nickel plated Baseplate material Epoxy Potting material Silicon rubber TES (UL 94V-0 rated) Weight 30 g (1.2 oz) Soldering temperature max. 265C / 10 sec.Outline Dimensions Outline Dimensions (2.0) 5 25.4 4 5.6 10.2 Insulated baseplate (0.22) (0.4) 1 2 2.5 (0.4) 10.2 (0.2) 5.08 3 Bottom View (1.0) Pin-Out (0.4) (0.8) (0.4) 20.32 (0.6) 10.16 10.16 15.2 Pin Single Dual 1 +Vin (Vcc) +Vin (Vcc) 2 -Vin (GND) -Vin (GND) 3 +Vout +Vout 4 No pin Common 5 -Vout -Vout (0.1) 50.8 Dimensions in [mm], () = Inch Pin diameter: 1.0 0.05 (0.039 0.0019) Pin pitch tolerances: 0.25 (0.01) Casing tolerances: 0.5 (0.02) All specifications valid at nominal input voltage, full load and +25C after warm-up time unless otherwise stated. http://www.tracopower.com Page 3 of 4 DC/DC Converters TEN 10 Series 10 Watt Heat-Sink (Option) Heat-sink TEN-HS4 (optional) Order code: TEN-HS4 (cont.: heat-sink, thermal pad, 2 clamps) Material: Aluminum Finish: Anodic treatment (black) Weight: 9 g (0.31oz) without converter Thermal impedance after assembling: 10 K/W Heat-sink Thermal pad Clamp Converter 31.1 (1.22) 31.0 (1.22) max. 18.0 (0.71) max. Note: Before attaching the heatsink, the product label on converter has to be removed for optimal performance. For volume orders we can supply the converters with heatsink already mounted. Please contact us for a relative quotation. Specifications can be changed without notice! Make sure you are using the latest documentation, downloadable at www.tracopower.com www.tracopower.com Rev. February 14. 2014 Page 4 of 4