THN 30-4813WI - TRACO Power

www.tracopower.com Page 1 of 4

DC/DC Converters

THN 30WI Series, 30 Watt

Features

◆ Highest power density 30W converter!

Ultra compact size: 1.0” x 1.0” x 0.4”

◆ Shielded metal case with isolated

baseplate

◆ Ultrawide 4:1 input voltage range

◆ Very high efﬁciency across full load range

up to 92%

◆ No minimum load required

◆ Remote On/Off control

◆ Operating temp. range –40°C to +80°C

and up to 85 °C with heat-sink

◆ Over temperature protection

◆ Output voltage adjustable

◆ I/O isolation voltage 1500 VDC

◆ RoHS 2011/65/EU compliant

◆ 3-year product warranty

The THN 30WI series is the latest generation of high performance DC/DC converter

modules with highest power density. The product achieves 30W output power while

it comes in a metal case with dimensions of only 1.0”x 1.0”x 0.4”.

All models have an ultra wide 4:1 input voltage range and precisely regulated

output voltages, even under no load conditions. Highest efﬁciency across full load

range makes this product very reliable and applicable in temperature ranges of up

to 85°C. With a low input current at minimal load and remote On/Off control these

converters are the ideal solution for battery-operated systems. Typical applications

are in mobile equipments, instrumentation, distributed power architectures in com-

munication and industrial electronics and everywhere where space on the PCB is

critical.

Order code Input voltage range Output voltage Output current max. Efﬁciency typ.

THN 30-2410WI 3.3 VDC 7000 mA 86 %

THN 30-2411WI 5.0 VDC 6000 mA 89 %

THN 30-2411WI-A1 5.0 VDC *16000 mA 89 %

THN 30-2412WI 12 VDC 2500 mA 89 %

THN 30-2413WI 9 – 36 VDC 15 VDC 2000 mA 89 %

THN 30-2415WI (24 VDC nominal) 24 VDC 1250 mA 89 %

THN 30-2425WI *2 48 VDC 625 mA 91 %

THN 30-2422WI ±12 VDC ±1250 mA 89 %

THN 30-2423WI ±15 VDC ±1000 mA 91 %

THN 30-2425WI ±24 VDC ±625 mA 91 %

THN 30-4810WI 3.3 VDC 7000 mA 87 %

THN 30-4811WI 5.0 VDC 6000 mA 90 %

THN 30-4811WI-A1 5.0 VDC *16000 mA 90 %

THN 30-4812WI 12 VDC 2500 mA 90 %

THN 30-4813WI 18 – 75 VDC 15 VDC 2000 mA 91 %

THN 30-4815WI (48 VDC nominal) 24 VDC 1250 mA 91 %

THN 30-4825WI *2 48 VDC 625 mA 91 %

THN 30-4822WI ±12 VDC ±1250 mA 91 %

THN 30-4823WI ±15 VDC ±1000 mA 92 %

THN 30-4825WI ±24 VDC ±625 mA 92 %

Models

Scheme

UL 60950-1UL 60950-1

*1 Adjustable output up to 6 VDC

*2 This dual ±24 VDC converter can be used as single 48 VDC converter (open common contact)

www.tracopower.com Page 2 of 4

DC/DC Converters

THN 30WI Series 30 Watt

Input Specifications

Input current at no load (at nominal input voltage) 24 Vin models: 10 mA typ.

48 Vin models: 8 mA typ.

Start-up voltage 24 Vin models: < 9.0 VDC

48 Vin models: < 18 VDC

Under voltage shut down (lock-out circuit) 24 Vin models: 8.0 VDC typ.

48 Vin models: 16 VDC typ.

Surge voltage (1 sec. max.) 24 Vin models: 50 V max.

48 Vin models: 100 V max.

Reflected input ripple current 30 mAp-p typ.

Conducted noise (input) EN 55032 class A and B (with external components)

– Filter proposal for compling to class A/B www.tracopower.com/overview/thn30wi

ESD (electrostatic discharge) EN 61000-4-2, air ±8 kV, contact ±6 kV,

perf. criteria A

Radiated immunity EN 61000-4-3, 10 V/m, perf. criteria A

Fast transient / Surge EN 61000-4-4, ±2 kV, perf. criteria A

EN 61000-4-5, ±2 kV perf. criteria A

With external input capacitor e.g. Nippon

chemi-con KY 220 µF, 100 V, ESR 48 mOhm

Conducted immunity EN 61000-4-6, 10 Vrms, perf. criteria A

Recommended input fuse (slow blow) 24 Vin models: 6300 mA

48 Vin models: 3150 mA

Output Specifications

Voltage set accuracy ±1 %

Output voltage adjustment range 5.0 Vout A1 models: –10 % to +20%

15 & 24 Vout models: –10 % to +20%

other single output models: ±10 %

– For further information see application note www.tracopower.com/overview/thn30wi

Regulation – Input variation (Vmin – Vmax) single output models: 0.2 % max.

dual output models: 0.5 % max.

– Load variation (0 – 100 %) single output models: 0.2 % max.

dual output models balanced load: 1.0 % max.

dual output models unbalanced load (25% /100%): 5.0 % max.

Minimum load not required

Ripple and noise (measured with output capacitor) 3.3 & 5.0 Vout models: 75 mVp-p with (22µF/25V X7R 1812 MLCC)

(20 MHz bandwidth) 12 & 15 Vout models: 75 mVp-p with (2x 22µF/25V X7R 1812 MLCC)

24 Vout models: 75 mVp-p with (2x 6.8µF/50V X7R 1812 MLCC)

dual output models: 60 mVp-p with (10µF/50V X7R 1812 MLCC)

Temperature coefficient ±0.02 %/K

Output current limitation at 170 % of Iout max.

Short circuit protection hiccup, automatic recovery

Over voltage protection 3.3 Vout models: 3.7 – 5.4 VDC

5.0 Vout models: 5.6 – 7.0 VDC

5.0 Vout A1 models: 6.3 – 7.4 VDC

12 Vout models: 13.5 – 19.6 VDC

15 Vout models: 18.3 – 22.0 VDC

24 Vout models: 29.1 – 32.5 VDC

Start up time (nominal Vin and constant resistive load) 30 ms max. (for power on and remote on)

Transient response setting time 250 µs typ. (25% load step change)

www.tracopower.com Page 3 of 4

All speciﬁcations valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.

DC/DC Converters

THN 30WI Series 30 Watt

General Specifications

Temperature ranges – Operating without heat sink –40°C to +80°C (with derating)

– Operating with heat sink –40°C to +85°C (with derating)

– Case temperature +105°C max.

– Storage –55°C to +125°C

Power derating – Operating without heat sink 2.2 %/K above +55°C

– Operating with heat sink 2.5 %/K above +60°C

Thermal impedance – Natural convection 15.0°C/W

– Natural convection with heat sink 13.8°C/W

Thermal protection shutdown at 115°C

Humidity (non condensing) 5 % to 95 % rel H max.

Reliability, calculated MTBF (MIL-HDBK-217F, at +70°C, ground benign) 1.2 Mio. h

Isolation voltage (60sec.) – Input/Output 1’500 VDC

– Input, Output/Case 1’000 VDC

Isolation capacitance – Input/Output 1’500 pF max.

Isolation resistance – Input/Output (500 VDC) >1 GOhm

Remote On/Off – On: 3.0 to 15 VDC or open circuit

– Off: 0 to 1.2 VDC or short circuit pin 6 and pin 2

– Off idle current: 2.0 mA

Switching frequency (fixed, pulse width modulation) 3.3 & 5.0 Vout models: 275 kHz ±10%

other models: 330 kHz ±10%

Vibration and thermal shock MIL-STD-810F

Safety standards UL/cUL 60950-1, IEC/EN 60950-1

Safety approvals – Online certification for UL/cUL 60950-1 www.ul.com -> certifications -> File e188913

copy: QQGQ2 (USA) QQGQ8 (Canada)

– Certification documents www.tracopower.com/overview/thn30wi

Physical Specifications

Casing material copper

Baseplate non conductive FR4

Potting material silicone (UL 94V-0 rated)

Weight 16.5 g (0.58oz)

Soldering temperature max. 265°C / 10sec.

Environmental compliance – Reach www.tracopower.com/info/reach-declaration.pdf

– RoHS RoHS directive 2011/65/EU

Application note: www.tracopower.com/overview/thn30wi

Output Specifications (continued)

Max. capacitive load 3.3 Vout models: 10’000 µF

5 Vout models: 7’200 µF

12 Vout models: 1’200 µF

15 Vout models: 1’000 µF

24 Vout models: 375 µF

±12 Vout models: 750 µF (each output)

±15 Vout models: 500 µF (each output)

±24 Vout models: 180 µF (each output)

Speciﬁcations can be changed without notice! Make sure you are using the latest documentation, downloadable at www.tracopower.com

www.tracopower.com

Page 4 of 4

DC/DC Converters

THN 30WI Series 30 Watt

Outline Dimensions

Dimensions in [mm], () = Inch

Pin diameter ø 1.0 (0.04)

Pin pitch tolerances: ±0.25 (±0.01)

Tolerances: ±0.5 (±0.02)

Rev. March 27. 2018

Pin Single Dual

1+Vin (Vcc) +Vin (Vcc)

2–Vin (GND) –Vin (GND)

3+Vout +Vout

4Trim Common

5–Vout –Vout

6Remote On/Off

Pin-Out

Note:

The product label on converter has to be re-

moved before mounting the heat-sink.

For volume orders converters will be sup-

plied with heat-sink already mounted. Please

contact factory for quotation.

Separate heat-sinks are only available for

prototypes and small quantity orders.

Order code: THN-HS1

(cont.: heat-sink, thermal pad, 2 clamps)

Material: Aluminum

Finish: Anodic treatment (black)

Weight: 8 g (0.28oz) without converter

Thermal impedance after assembling: 13.8 K/W

Heat-Sink (Option)

31.0 (1.22) max.

14.5 (0.57)

16.5 (0.65)

max.

Converter

Heat-sink

Thermal pad

Clamp

25.4

Bottom view

20.32

7.62

5.6

(0.3)

(0.22)

(0.8)

(1.0)

5.08

(0.2)

9.9

(0.39)

2.5

(0.1)

10.16

(0.4)

2.5

(0.1)

10.16

(0.4)

Mouser Electronics

Authorized Distributor

Click to View Pricing, Inventory, Delivery & Lifecycle Information:

TRACO Power:

THN 30-2411WI THN 30-2412WI THN 30-4813WI THN 30-4815WI THN 30-2410WI THN 30-4811WI THN 30-

2413WI THN 30-2415WI THN 30-4822WI THN 30-2423WI THN 30-2422WI THN 30-4812WI THN 30-4823WI THN

30-4810WI THN 30-2425WI THN 30-4825WI