SLVS075I - APRIL 1989 - REVISED DECEMBER 2005 D Operating Current Range D D D D D LM285-1.2 . . . D PACKAGE LM385-1.2 . . . D, PS, OR PW PACKAGE LM385B-1.2 . . . D OR PW PACKAGE (TOP VIEW) - LM285 . . . 10 A to 20 mA - LM385 . . . 15 A to 20 mA - LM385B . . . 15 A to 20 mA 1% and 2% Initial Voltage Tolerance Reference Impedance - LM385 . . . 1 Max at 25C - All Devices . . . 1.5 Max Over Full Temperature Range Very Low Power Consumption Applications - Portable Meter References - Portable Test Instruments - Battery-Operated Systems - Current-Loop Instrumentation - Panel Meters Interchangeable With Industry Standard LM285-1.2 and LM385-1.2 NC NC NC ANODE 1 8 2 7 3 6 4 5 CATHODE NC NC NC NC - No internal connection LM285-1.2, LM385-1.2, LM385B-1.2 . . . LP PACKAGE (TOP VIEW) ANODE CATHODE NC NC - No internal connection description/ordering information These micropower, two-terminal, band-gap voltage references operate over a 10-A to 20-mA current range and feature exceptionally low dynamic impedance and good temperature stability. On-chip trimming provides tight voltage tolerance. The band-gap reference for these devices has low noise and long-term stability. ORDERING INFORMATION TA VZ TOLERANCE SOIC (D) SOP (PS) 2% TO-226 / TO-92 (LP) TSSOP (PW) 0C 0 C to 70 70C C SOIC (D) 1% TO-226 / TO-92 (LP) TSSOP (PW) -40C -40 C to 85 85C C 1% ORDERABLE PART NUMBER PACKAGE SOIC (D) Tube of 75 LM385D-1-2 Reel of 2000 LM385DR-1-2 Reel of 2000 LM385PSR-1-2 Tube of 1000 LM385LP-1-2 Reel of 2000 LM385LPR-1-2 Tube of 150 LM385PW-1-2 Reel of 2000 LM385PWR-1-2 Tube of 75 LM385BD-1-2 Reel of 2000 LM385BDR-1-2 Tube of 1000 LM385BLP-1-2 Reel of 2000 LM385BLPR-1-2 Tube of 150 LM385BPW-1-2 Reel of 2000 LM385BPWR-1-2 Tube of 75 LM285D-1-2 Reel of 2000 LM285DR-1-2 TOP-SIDE MARKING 385-12 L385-12 385-12 385-12 385B12 385B12 385B12 285-12 TO-226 / TO-92 (LP) Tube of 1000 LM285LP-1-2 285-12 Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at www.ti.com/sc/package. Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. Copyright 2005, Texas Instruments Incorporated !"#$ % &'!!($ #% )'*+&#$ ,#$( !,'&$% &!" $ %)(&&#$% )(! $-( $(!"% (.#% %$!'"($% %$#,#!, /#!!#$0 !,'&$ )!&(%%1 ,(% $ (&(%%#!+0 &+',( $(%$1 #++ )#!#"($(!% POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 1 SLVS075I - APRIL 1989 - REVISED DECEMBER 2005 description/ordering information (continued) The design makes these devices exceptionally tolerant of capacitive loading and, thus, easier to use in most reference applications. The wide dynamic operating temperature range accommodates varying current supplies, with excellent regulation. The extremely low power drain of this series makes them useful for micropower circuitry. These voltage references can be used to make portable meters, regulators, or general-purpose analog circuitry, with battery life approaching shelf life. The wide operating current range allows them to replace older references with tighter-tolerance parts. symbol ANODE CATHODE schematic CATHODE Q13 7.5 k 600 k Q12 Q7 200 k Q4 Q11 50 k Q3 Q10 Q1 300 k 20 pF Q2 20 pF Q9 Q5 Q6 Q8 Q14 100 k 500 60 k ANODE NOTE A: Component values shown are nominal. 2 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 SLVS075I - APRIL 1989 - REVISED DECEMBER 2005 absolute maximum ratings over operating free-air temperature range (unless otherwise noted) Reverse current, IR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 mA Forward current, IF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 mA Package thermal impedance, JA (see Notes 1 and 2): D package . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97C/W LP package . . . . . . . . . . . . . . . . . . . . . . . . . . 140C/W PS package . . . . . . . . . . . . . . . . . . . . . . . . . . . 95C/W PW package . . . . . . . . . . . . . . . . . . . . . . . . . 149C/W Operating virtual junction temperature, TJ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150C Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 260C Storage temperature range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -65C to 150C Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. NOTES: 1. Maximum power dissipation is a function of TJ(max), JA, and TA. The maximum allowable power dissipation at any allowable ambient temperature is PD = (TJ(max) - TA)/JA. Operation at the absolute maximum TJ of 150C can affect reliability. 2. The package thermal impedance is calculated in accordance with JESD 51-7. recommended operating conditions IZ Reference current TA Operating free-air temperature range LM285-1.2 LM385-1.2, LM385B-1.2 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 MIN MAX 0.01 20 -40 85 0 70 UNIT mA C 3 SLVS075I - APRIL 1989 - REVISED DECEMBER 2005 electrical characteristics at specified free-air temperature PARAMETER LM285-1.2 LM385-1.2 LM385B-1.2 TEST CONDITIONS TA MIN TYP MAX MIN TYP MAX MIN TYP MAX 1.223 1.235 1.247 1.21 1.235 1.26 1.223 1.235 1.247 VZ Reference voltage IZ = I(min) to 20 mA 25C VZ Average temperature coefficient of reference voltage IZ = I(min) to 20 mA Full range VZ Change in reference voltage with current VZ/t Long-term change in reference voltage IZ(min) Minimum reference current zz Reference impedance Vn IZ = 100 A, Broadband f = 10 Hz to noise voltage 10 kHz IZ = I(min) to 1 mA IZ = 1 mA to 20 mA IZ = 100 A 25C 20 20 1 1 1 1.5 1.5 1.5 25C 12 20 20 Full range 30 30 30 25C 25C 20 20 10 8 15 8 15 0.2 0.6 0.4 1 0.4 1 1.5 60 1.5 60 1.5 60 mV ppm/khr 8 Full range 25C 20 V ppm/C Full range Full range IZ = 100 A, f = 25 Hz 20 UNIT A V Full range is -40C to 85C for the LM285-1.2 and 0C to 70C for the LM385-1.2 and LM385B-1.2. I(min) = 10 A for the LM285-1.2 and 15 A for the LM385-1.2 and LM385B-1.2 The average temperature coefficient of reference voltage is defined as the total change in reference voltage divided by the specified temperature range. 4 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 SLVS075I - APRIL 1989 - REVISED DECEMBER 2005 TYPICAL CHARACTERISTICS REFERENCE VOLTAGE CHANGE vs REVERSE CURRENT REVERSE CURRENT vs REVERSE VOLTAGE IIIIIII IIIIIII 16 100 10 1 0.1 0 0.2 0.4 0.6 IIIIII IIIIII TA = -55C to 125C V Z - Reference Voltage Change - mV I R - Reverse Current - A TA = -55C to 125C 0.8 1 1.2 12 8 4 0 -4 0.01 1.4 0.1 1 10 100 IR - Reverse Current - mA VR - Reverse Voltage - V Figure 1 Figure 2 REFERENCE VOLTAGE vs FREE-AIR TEMPERATURE FORWARD VOLTAGE vs FORWARD CURRENT IIII 1.2 1.245 V Z - Reference Voltage - V V F - Forward Voltage - V TA = 25C 0.8 0.4 1.24 1.235 1.23 1.225 0 0.01 0.1 1 10 100 1.220 -55 -35 -15 5 25 45 65 85 105 125 TA - Free-Air Temperature - C IF - Forward Current - mA Figure 3 Figure 4 Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices. POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 5 SLVS075I - APRIL 1989 - REVISED DECEMBER 2005 TYPICAL CHARACTERISTICS NOISE VOLTAGE vs FREQUENCY REFERENCE IMPEDANCE vs REFERENCE CURRENT 700 100 600 Vn - Noise Voltage - nV/ Hz Vn zz - Reference Impedance - f = 25 Hz TA = -55C to 125C 10 1 IZ = 100 A TA = 25C 500 400 300 200 100 0.1 0.01 0.1 1 10 0 10 100 100 1k Figure 6 Figure 5 OUTPUT NOISE VOLTAGE vs CUTOFF FREQUENCY 50 40 IZ = 100 A TA = 25C TRANSIENT RESPONSE IIIII IIII IIII 100 A R C 30 20 Output 1.5 36 k 1 VI VO 0.5 0 5 10 0 0.1 III III RC Low Pass Input and Output Voltages - V Output Noise Voltage - V 60 100 k f - Frequency - Hz IZ - Reference Current - mA 70 10 k Input 1 10 f - Cutoff Frequency - kHz 100 0 Figure 7 0 100 t - Time - s 500 600 Figure 8 Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices. 6 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 SLVS075I - APRIL 1989 - REVISED DECEMBER 2005 APPLICATION INFORMATION IO 58 A + V+ 5.1 k 100 k 1% Mercury Cell 1.345 V LM334 cw - R 2.00 k 1% cw V- 500 10 k 412 1% 953 1% LM385-1.2 + Type K - Meter Adjust for 11.15 mV at 25C across 953 Adjust for 12.17 mV at 25C across 412 Figure 9. Thermocouple Cold-Junction Compensator 2.3 V V+ 30 V V+ LM334 R V- 2.74 k 1.2 V LM385-1.2 Figure 10. Operation Over a Wide Supply Range 9V 499 k 1.2 V LM385-1.2 Figure 11. Reference From a 9-V Battery POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 7 PACKAGE OPTION ADDENDUM www.ti.com 11-Nov-2009 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Drawing Pins Package Eco Plan (2) Qty LM285D-1-2 ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM285DE4-1-2 ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM285DG4-1-2 ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM285DR-1-2 ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM285DRE4-1-2 ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM285DRG4-1-2 ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM285LP-1-2 ACTIVE TO-92 LP 3 1000 Pb-Free (RoHS) CU SN N / A for Pkg Type LM285LPE3-1-2 ACTIVE TO-92 LP 3 1000 Pb-Free (RoHS) CU SN N / A for Pkg Type LM285LPRE3-1-2 ACTIVE TO-92 LP 3 2000 Pb-Free (RoHS) CU SN N / A for Pkg Type LM385BD-1-2 ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM385BDE4-1-2 ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM385BDG4-1-2 ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM385BDR-1-2 ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM385BDRE4-1-2 ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM385BDRG4-1-2 ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM385BLP-1-2 ACTIVE TO-92 LP 3 1000 Pb-Free (RoHS) CU SN N / A for Pkg Type LM385BLPE3-1-2 ACTIVE TO-92 LP 3 1000 Pb-Free (RoHS) CU SN N / A for Pkg Type LM385BLPR-1-2 ACTIVE TO-92 LP 3 2000 Pb-Free (RoHS) CU SN N / A for Pkg Type LM385BLPRE3-1-2 ACTIVE TO-92 LP 3 2000 Pb-Free (RoHS) CU SN N / A for Pkg Type LM385BPW-1-2 ACTIVE TSSOP PW 8 150 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM385BPWE4-1-2 ACTIVE TSSOP PW 8 150 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM385BPWG4-1-2 ACTIVE TSSOP PW 8 150 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM385BPWR-1-2 ACTIVE TSSOP PW 8 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM385BPWRE4-1-2 ACTIVE TSSOP PW 8 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM385BPWRG4-1-2 ACTIVE TSSOP PW 8 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Addendum-Page 1 Lead/Ball Finish MSL Peak Temp (3) PACKAGE OPTION ADDENDUM www.ti.com 11-Nov-2009 Orderable Device Status (1) Package Type Package Drawing Pins Package Eco Plan (2) Qty LM385D-1-2 ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM385DE4-1-2 ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM385DG4-1-2 ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM385DR-1-2 ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM385DRE4-1-2 ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM385DRG4-1-2 ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM385LP-1-2 ACTIVE TO-92 LP 3 1000 Pb-Free (RoHS) CU SN N / A for Pkg Type LM385LPE3-1-2 ACTIVE TO-92 LP 3 1000 Pb-Free (RoHS) CU SN N / A for Pkg Type LM385LPR-1-2 ACTIVE TO-92 LP 3 2000 Pb-Free (RoHS) CU SN N / A for Pkg Type LM385LPRE3-1-2 ACTIVE TO-92 LP 3 2000 Pb-Free (RoHS) CU SN N / A for Pkg Type LM385PW-1-2 ACTIVE TSSOP PW 8 150 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM385PWE4-1-2 ACTIVE TSSOP PW 8 150 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM385PWG4-1-2 ACTIVE TSSOP PW 8 150 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM385PWR-1-2 ACTIVE TSSOP PW 8 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM385PWRE4-1-2 ACTIVE TSSOP PW 8 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM385PWRG4-1-2 ACTIVE TSSOP PW 8 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Lead/Ball Finish MSL Peak Temp (3) (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability information and additional product content details. TBD: The Pb-Free/Green conversion plan has not been defined. Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes. Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above. Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material) (3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. Addendum-Page 2 PACKAGE OPTION ADDENDUM www.ti.com 11-Nov-2009 Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. Addendum-Page 3 PACKAGE MATERIALS INFORMATION www.ti.com 14-Jul-2012 TAPE AND REEL INFORMATION *All dimensions are nominal Device LM285DR-1-2 Package Package Pins Type Drawing SOIC SPQ Reel Reel A0 Diameter Width (mm) (mm) W1 (mm) B0 (mm) K0 (mm) P1 (mm) W Pin1 (mm) Quadrant D 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 Q1 LM385BDR-1-2 SOIC D 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 Q1 LM385BPWR-1-2 TSSOP PW 8 2000 330.0 12.4 7.0 3.6 1.6 8.0 12.0 Q1 LM385DR-1-2 SOIC D 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 Q1 LM385PWR-1-2 TSSOP PW 8 2000 330.0 12.4 7.0 3.6 1.6 8.0 12.0 Q1 Pack Materials-Page 1 PACKAGE MATERIALS INFORMATION www.ti.com 14-Jul-2012 *All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) LM285DR-1-2 SOIC D 8 2500 340.5 338.1 20.6 LM385BDR-1-2 SOIC D 8 2500 340.5 338.1 20.6 LM385BPWR-1-2 TSSOP PW 8 2000 367.0 367.0 35.0 LM385DR-1-2 SOIC D 8 2500 340.5 338.1 20.6 LM385PWR-1-2 TSSOP PW 8 2000 367.0 367.0 35.0 Pack Materials-Page 2 MECHANICAL DATA MSOT002A - OCTOBER 1994 - REVISED NOVEMBER 2001 LP (O-PBCY-W3) PLASTIC CYLINDRICAL PACKAGE 0.205 (5,21) 0.175 (4,44) 0.165 (4,19) 0.125 (3,17) DIA 0.210 (5,34) 0.170 (4,32) Seating Plane 0.157 (4,00) MAX 0.050 (1,27) C 0.500 (12,70) MIN 0.104 (2,65) FORMED LEAD OPTION 0.022 (0,56) 0.016 (0,41) 0.016 (0,41) 0.014 (0,35) STRAIGHT LEAD OPTION D 0.135 (3,43) MIN 0.105 (2,67) 0.095 (2,41) 0.055 (1,40) 0.045 (1,14) 1 2 3 0.105 (2,67) 0.080 (2,03) 0.105 (2,67) 0.080 (2,03) 4040001-2 /C 10/01 NOTES: A. All linear dimensions are in inches (millimeters). B. This drawing is subject to change without notice. C. Lead dimensions are not controlled within this area D. FAlls within JEDEC TO -226 Variation AA (TO-226 replaces TO-92) E. Shipping Method: Straight lead option available in bulk pack only. Formed lead option available in tape & reel or ammo pack. POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 1 MECHANICAL DATA MSOT002A - OCTOBER 1994 - REVISED NOVEMBER 2001 LP (O-PBCY-W3) PLASTIC CYLINDRICAL PACKAGE 0.539 (13,70) 0.460 (11,70) 1.260 (32,00) 0.905 (23,00) 0.650 (16,50) 0.610 (15,50) 0.020 (0,50) MIN 0.098 (2,50) 0.384 (9,75) 0.335 (8,50) 0.748 (19,00) 0.217 (5,50) 0.433 (11,00) 0.335 (8,50) 0.748 (19,00) 0.689 (17,50) 0.114 (2,90) 0.094 (2,40) 0.114 (2,90) 0.094 (2,40) 0.169 (4,30) 0.146 (3,70) DIA 0.266 (6,75) 0.234 (5,95) 0.512 (13,00) 0.488 (12,40) TAPE & REEL 4040001-3 /C 10/01 NOTES: A. All linear dimensions are in inches (millimeters). B. This drawing is subject to change without notice. C. Tape and Reel information for the Format Lead Option package. 2 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All semiconductor products (also referred to herein as "components") are sold subject to TI's terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI's terms and conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily performed. TI assumes no liability for applications assistance or the design of Buyers' products. Buyers are responsible for their products and applications using TI components. To minimize the risks associated with Buyers' products and applications, Buyers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other intellectual property right relating to any combination, machine, or process in which TI components or services are used. Information published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional restrictions. Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause harm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use of any TI components in safety-critical applications. In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI's goal is to help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and requirements. Nonetheless, such components are subject to these terms. No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties have executed a special agreement specifically governing such use. Only those TI components which TI has specifically designated as military grade or "enhanced plastic" are designed and intended for use in military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components which have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal and regulatory requirements in connection with such use. TI has specifically designated certain components which meet ISO/TS16949 requirements, mainly for automotive use. Components which have not been so designated are neither designed nor intended for automotive use; and TI will not be responsible for any failure of such components to meet such requirements. Products Applications Audio www.ti.com/audio Automotive and Transportation www.ti.com/automotive Amplifiers amplifier.ti.com Communications and Telecom www.ti.com/communications Data Converters dataconverter.ti.com Computers and Peripherals www.ti.com/computers DLP(R) Products www.dlp.com Consumer Electronics www.ti.com/consumer-apps DSP dsp.ti.com Energy and Lighting www.ti.com/energy Clocks and Timers www.ti.com/clocks Industrial www.ti.com/industrial Interface interface.ti.com Medical www.ti.com/medical Logic logic.ti.com Security www.ti.com/security Power Mgmt power.ti.com Space, Avionics and Defense www.ti.com/space-avionics-defense Microcontrollers microcontroller.ti.com Video and Imaging www.ti.com/video RFID www.ti-rfid.com OMAP Applications Processors www.ti.com/omap TI E2E Community e2e.ti.com Wireless Connectivity www.ti.com/wirelessconnectivity Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright (c) 2012, Texas Instruments Incorporated