ScotchlokTM Terminals MNG18-47P, MNG14-47P, MNG10-55P L Pin, Nylon Insulated with Insulation Grip PL Data Sheet L Barrel Length Barrel I.D. PL Maximum Insulation Diameter 0.080 0.93 0.25 0.070 0.47 0.145 16-14 0.080 0.91 0.25 0.090 0.47 0.170 12-10 0.110 1.105 0.25 0.135 0.55 0.250 Product Number Wire Range (AWG) Pin Diameter MNG18-47P 22-18 MNG14-47P MNG10-55P Installation Information WARNING 3M File No. E23438 Turn power off before installing or removing terminal. All electrical work should be done according to appropriate electrical codes. UL Recognized for use on stranded copper (AWG) wire only. Strip away the end 3/8 inch of wire insulation. Specifications Wire Size: Barrel Seam: Maximum Voltage Rating: Maximum Temperature Rating: Maximum Current: Insulator Material: Terminal Material: Insulation Grip Material: Plating: See Table Above Butted 600 V Building Wire 1000 V Signs or Fixtures (Luminaires) 221F, (105C) Same as Wire Nylon ETP Copper Brass Tin Make the crimp in the proper station of a recommended 3M crimp tool: TH-440, TH-450 (scissor style) or TR-482, TR-490 (ratchet style) hand tools. Barrel Crimp (Required) Insulation Crimp (Recommended) Engineering Specification Crimp-Type pin terminals shall, electrically and mechanically connect to a prestripped end of a stranded copper wire: and have a round pin portion for mounting under under a screw, stud or inserting in a compatible terminal block. The pin terminal line shall offer barrel variations variations in wire size 22-18 AWG, 16-14 AWG, 12-10 AWG and construction (non-insulated butted seam, nylon insulated with insulation grip, etc...) The terminal line shall have regulatory agency coverage (UL Recognized). The terminal shall be marked with the wire range and the manufacturer's symbol.() The Nylon Insulated Pin Terminal with Insulation Grip shall be tin plated, annealed copper, with a pin having a specified length and diameter and with a tin plated brass funnel entry insulation grip covered by a molded nylon sleeve, color coded, and sized for a specified (AWG) wire range (22-18, 16-14, 12-10). Insulated connectors shall be UL Recognized for 600 volts maximum, building wire: 1000 volts maximum, signs, fixtures or luminaires and temperature rated 221F (105C ) maximum. 3M and Scotchlok are trademarks of 3M. is a trademark of Underwriters Laboratories. IMPORTANT NOTICE Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Warranty; Limited Remedy; Limited Liability. This product will be free from defects in material and manufacture as of the date of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M's option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any loss or damage arising from this 3M product, whether direct, indirect, special, incidental or consequential regardless of the legal theory asserted. Electrical Products Division 6801 River Place Blvd. Austin, TX 78726-9000 800 245 3573 http://www.3M.com/elpd Litho in USA. (c) 3M 2002 78-8125-9793-4-A