26041ME-01 SPECIFICATION FOR CARBON ZINC DRY BATTERY 6F22R SS eal Matsushita Battery Industrial Co., Ltd. Matsushita Electric Industrial Co., Ltd. PRODUCT SPECIFICATIONS Individual Product Specification REFERENCE : IEC 60086-1, 60086-2 1 MODEL NO. 6F22R [ IEC DESIGNATION : 6F22] 2 NOMINAL 9Vots VOLTAGE 3, AVERAGEWEIGHT 385g 4. PERFORMANCE Duration should be over the value in Table-1 after the test of Q(testing method). O.C.V. and resistance to leakage should meet the Table-1 after the test of 9(testing method). Table -1 Test condition MBI SPEC (1)* Temp. Unit | initial 20 & Humd. 20+2C_ 7 O.C.V | 65+20% (RA) 30min | 4.8 fo 440 Duration 1h 5.4 10.5 9.0 8.0. ed 23 21 27 specified dimension. After usual discharging test, There shall be neither evidence of electrolyte @ w the discharge is repeated until | leakage on the surface of any battery nor deformation o 2 CCV drops for the first time of the specified dimension. vil = > below 3.6V. uv) oc : @ After storage for 30 days. There shall be neither evidence of electrolyte leakage on c the surface of any battery nor deformation of the D V) @ &5 Es o w 5 2 cE 3s oO mje Note (1)* Expiry code is the period in which batteries satisfy duration. This type of batteries shall have life of 18 months after manufactured. 9%. INSULATION It should be more than 10M 2(500V/DC) both between terminal and outer RESISTANCE jacket, and between terminals which is not connected electrically. 6. DIMENSIONS As per attached drawings. 7. TERMINALS Snap terminal | There should be no rust or deformation, which will cause hindrance on use. 8. APPEARANCE There should be no stain, scratch and deformation which will cause hindrance on use. Date of stipulation: Date of revision 0: Stipulated Checked Described February,4,1999 | | Aor: es y. bh Matsushita Battery Industrial Co., Ltd. Matsushita Electric Industrial Co., Ltd. _PRODUCT SPECIFICATIONS _ Individual Product Specification | Serial No, 26041ME-01 REFERENCE : IEC 60086-1, 60086-2 9. TESTING METHOD 9.1 Storage condition : The temperature of 20C storage shall be 20+2C and the relative humidity shall be 65-20%. However, during 3 months that it is short periods only, it may be 20+5C. 9.2 Environmental condition: If not specified, the temperature is 20+15C and the relative Humidity is 65-20% as normal environmental condition of JIS Z 8703. 9.3 Testing condition - Refer to Table-2. Table - 2 Service Life Battery shall be discharged as specified condition until the voltage on load drops for the first time below the specified end point. 1)Commencement :after storing more than 8 hours under the condition of Table-1. 2)Discharging method : Table-1 3)Calculation of average service life. Test nine batteries and calculate the average. Open Circuit After storing more than 8 hours, measure with a voltmeter mentioned below under Voltage the condition of Table-1. The accuracy of voltmeter shall be within 0.25% of the nominal voltage. The resistance shall be with minimum 1MQ. Resistance to Test under the condition of Table-1. Leakage at _ Over Discharge Resistance to Test under the condition of Table-1. Leakage at High Temperature Equipment shall have rated voltage 500V as specified JIS C 1302, or has more | accuracy. Measure with a caliper which has under 200mm measuring range and 0.05mm minimum scale value as specified JIS B 7507 or an instrument which has more accuracy. Terminal & Inspect by visual. Appearance Date of stipulation: Date of revision 0: Stipulated Checked at | Described | February,4,1999 ( : Ahad Vi pat +9. bl, Matsushita Battery Industrial Co., Ltd. Matsushita Electric Industrial Co., Ltd. PRODUCT SPECIFICATIONS 7 Individual Product Specification | | Serial No. 26041ME-01 REFERENCE : IEC 60086-1, 60086-2 10. MARKING a) Battery system ; Carbon Zinc battery b) Designation : 6F22R c) Nominal voltage ; OV d) Polarity of terminal @, CO e) Name or trade mark of - specified as the drawing of designs the manufacturer f) Expiry code : Specified as the drawing of designs g) Precaution - Specified as the drawing of designs Date of stipulation: | Date of revision 0; | Stipulated | Checked Desonbed Matsushita Battery Industrial Co., Ltd. Matsushita Electric Industrial Co., Ltd. PRODUCT SPECIFICATIONS Individual Product Specification Serial No. 26041ME-01 REFERENCE : IEC 60086-1, 60086-2 6F22 7 = a | , min max min | max min max min er below below (8.2) | (5.4) | (63) | (82) | 59 | 57 | (5.5) (3.9) 33 | 29 13.1 12.5 Note: (2)* Detail dimensions of snap terminal for 6F22Y(NB) (3)" Detail dimensions of snap terminal differs between 6F22Y and 6F22. Remarks: Figures in parenthesis are referrnce values. Date of stipulation: Date of revision 0: Stipulated Checked Described February,4,1999 RA ime a Y bh: hy Matsushita Battery Industrial Co., Ltd. Matsushita Electric Industrial Co., Ltd.