Specifications Signal Tower Dimensions (Unitmm) Model LA6- D - Rated Voltage DC24 V Operating Voltage Range 10% of Rated Voltage Standard Rated Power Consumption Maximum 16 LA6-5 D N-RYGBC 5W LA6-5 D B-RYGBC 6.5W LA6-3D N-RYG 3.5W LA6-3D B-RYG 4.5W LA6-5 D N-YYYYY 7W LA6-5 D B-YYYYY 8W LA6-3D N-YYY 4.5W LA6-3D B-YY 5.5W 16 < Specification : Height > 5 - B : 330 3 - B : 264 5 - N : 290 3 - N : 224 Environmental Condition Power Consumption test with alarm set at Alarm Sound No.1 at maximum volume Signal Wire Current Maximum 70mA Standby Current Maximum 15mA [LJ Steel Pole & `L' Bracket Cable Type T N Direct Mount / Terminal Buss Type < Specification : Height > 5 - B : 320 3 - B : 254 5 - N : 280 3 - N : 214 Operating Ambient Temperature -25 to +60 Operating Humidity Range Less than 90% RH (No Dew or Condensation) Storage Temperature Range -25 to +60 Storage Humidity Range Less than 90% RH (No Dew or Condensation) 70 Indoor Only 40 Mounting Direction Upright/Inverted Direction 20 IP65 (With alarm: IP54) IEC 60529 2 Environmental Condition Install in an upright position LA6- LJ Sweep Durability: Total amplitude: 0.3 mmp-p (10 - 57.5 Hz), Acceleration: 20.0 m/s2 (57.5 - 150 Hz) Fixed pitch durability: Acceleration 20.0 m/s2 LA6- TN Sweep Durability: Total amplitude 0.3 mmp-p (10 - 57.5 Hz), Acceleration: 20.0 m/s2 (57.5 - 150 Hz) Fixed Vibration Frequency Durability: Acceleration 10.0 m/s2 500VAC for 1min between terminals and chassis without breaking insulation Display Color red (1000 mcd) yellow (1700 mcd) green (2600 mcd) blue (1000 mcd) white (1250 mcd) 3 3 Mounting Surface Thickness Range: 16mm or less. L L Bracket Dimensional Drawing (Typical Luminous Intensity) Purple (800 mcd) pink (850 mcd) cyan (2150 mcd) lemon (2150 mcd) * Due to the characteristics of the LED elements, a variation in difference of the color tone and brightness of every product may occur. Flash Rate 60 2 fpm 2400Hz Rapid intermittent beep No. 4 2400Hz Fast intermittent beep No. 5 3600Hz Continuous beep No. 6 3600Hz Rapid intermittent beep No. 7 3600Hz Long intermittent beep No. 8 3600Hz Fast intermittent beep No. 9 2400Hz & 3375Hz Multiplexed Beep No. 10 2400Hz & 3600Hz Multiplexed Beep Environmental Condition Alarm Sound No.1 measured from the front direction of the alarm opening at 1m The set up button is the fourth step (Factory Default: Maximum). Volume Control [Maximum] -> [-5dB drop from maximum (standard)] -> [-10dB drop from maximum (standard)] -> [OFF] (-> Returns to [Maximum]) Data Transfer Main Unit Interface Transfer Cable USB micro-B Terminal Female Data Programming Application Software Exclusive Application Software (Downloadable from our Homepage) Unit: mm 5 2.5 40 Mounting Hole5 Nameplate Location Maximum: 85dB Top View (Unit: mm) 2 12 No. 2 2400Hz Long intermittent beep Outer Dimension 6 17 (10) 2400Hz Continuous beep sound No. 3 (Alarm Direction) Mounting Hole5 5 0 12 No. 1 Front Direction No. 11 4000Hz & 4800Hz Multiplexed Beep 32 20 60 81 Side View Mounting Hole5 Wiring Hole Bottom View 4.5 31 122 66 ( TN Type) 2 Use 23 for Cable Gland (34.6) 2- 81 11 Model Code USB2.0/1.1 Interface, Transmission Rate: USB2.0/1.1/1.0 Charge /Data Transfer Micro USB (not included); Connector: USB Male- USB (MicroB) male Signal Tower LA6-3DTN B 480g LA6-3DLJ B 980g LA6-3DTN N 420g LA6-3DLJ N 930g LA6-5 DTN B 590g LA6-5 DLJ B 1090g LA6-5 DTN N Remarks L Bracket NoteCable gland is not included with this product. More than 1Mohm at DC500V between the power input lead and chassis. Withstand Voltage Compliance Standards 313.5 Cable Gland Insulation Resistance Mass (Tolerance 10%) 294 Wire Length1060 Environmental Condition Tested while installed in an upright position Sound Level 284 60 2 TN Type Underside View Cable Gland Mounting Screw Hole M16x1.5 Effective Screw Length: 12mm JIS C 60068-2-6:2010 Alarm Sound (Typical Frequency) 1 Mounting Surface Thickness Range: 4mm or less. 0 Vibration Resistance 8.5 60 10 Protection Rating 40 10 1 Mounting Location 70 530g LA6-5 DLJ N RoHS Directive (EN 50581) UL508, CSA-C22.2 No.14 KC ( KN 61000-6-4, KN 61000-6-2) FCC Part 15 SubpartB Class A CE Marking LA6-5DTNUB-RYGBC D Mounting/Wiring...Direct Mount/Terminal Buss LED Tiers...5 Color...Red/Amber/Green/Blue/White Body Color...Silver FlashingAlarm...with Flash and Alarm LED Tiers Mounting/Wiring 3: 3 Tiers TN: Direct/Terminal 5: 5 Tiers LJ: Steel Pole & Angle Cable 1040g EMC Directive (EN 61000-6-4, EN 61000-6-2) LA6- Example: Body Color W: Off-white U: Silver Flashing/Alarm B: With N: Without Color RYG: 3 Tiers RYGBC: 5 Tiers The LED light color for each tier can be changed after purchase. LJ type does not have a "U" (Silver) specification. UL Recognized Component (File No.E215660) See More, Do More! Embedded Software Program, Wiring External Contact Classification Contact Relay Don't Apply Voltage! LA6 N No Flashing/Alarm B External Contact Classification PLC NPN Transistsor Flashing/Pulse Enable External Contact Flashing/Alarm Don't Apply Voltage! LA6 N No Flashing/Alarm B Flashing/Alarm Flashing/Pulse Enable Brown / C o mmo n Li n e LED Tier 1/ Input1 Red / LED Tier 2/ Input2 Orange / LED Tier 3/ Input3 Green / LED Tier 4/ Input4 Blue / LED Tier 5/ Input5 White / Purple / Alarm 1/ Input6 Lt. Blue / Alarm 2/ Input7 Pink / Mode Change LED Tier 1/ Input1 LED Tier 2/ Input2 Orange / LED Tier 3/ Input3 Green / Blue / LED Tier 4/ Input4 LED Tier 5/ Input5 White / Purple / Alarm 1/ Input6 Lt. Blue / Alarm 2/ Input7 Pink / Mode Change Lighting/Alarm Power Supply Wire Gray / Power Supply Wire Yellow / B Flashing/Alarm Type To set a variety of colors or use different mode features. Flashing/Pulse Enable PLC Output Unit 2 Flashing/Pulse Enable Brown / C om m on L i n e External Contact PLC Lighting/Alarm PLC Output Unit 1 Circuit Diagram C E Gray / Power Supply Wire Power Supply Wire Yellow / DC 24V (Class2) (Non-polarized) B B Flashing/Alarm Type DC 24V (Class 2) Inaba Bldg 4-11-14 Itachibori, Nishi-ku, Osaka, Japan 550-0012 International Division, Sales and Marketing Department E-mail: overseas@patlite.co.jp TEL: +81-6-7688-5400 FAX: +81-6-7688-5401 20130 S. Western Ave. Torrance, CA 90501, U.S.A. TEL: +1-310-328-3222 FAX: +1-310-328-2676 Am Soeldnermoos 8, D-85399 Hallbergmoos, Germany TEL.+49 -811 9981 9770-0 FAX.+49-811 9981 9770-9 E-mail: info@patlite.eu A-2603, Daesung-D-POLIS, 543-1 Gasan-dong, Geumcheon-gu, Seoul, 153-719 TEL.+82-2-523-6636 FAX.+82-2-861-9919 E-mail : sales@patlite.co.kr E-mail: sales@patlite.com No.2 Leng Kee Road, #05-01 Thye Hong Centre, Singapore 159086 TEL: +65-6226-1111 FAX: +65-6324-1411 E-mail: sales@patlite.com.sg 7F. No. 91, Huayin St, Datong District Taipei, Taiwan R.O.C TEL.+886-(0)2-2555-1611 FAX.+886-(0)2-2555-1621 E-mail: info@patlite.tw LOT 321 Batamindo Industrial Park, Jalan Beringin Mukakuning, Batam 29433 Indonesia TEL: +62-770-61-1123 FAX: +62-770-61-2444 Room 512, Jufeng Business Building, No.697-3 Lingshi Road, Shanghai China 200072 E-mail: sales@patlite.cn TEL: +86-21-6630-8969 FAX: +86-21-6630-8938 PATLITE ECO PROJECT For the benefit of mankind and the earth, Patlite is committed to developing environmentally friendly products. To ensure correct use of these products, read the "Instruction Manual" prior to use. Failure to follow all safeguards can result in fire, electric shock, or other accidents.Specifications are subject to change without notice. Catalog No. K-3111A 1410 M/M(SM)A www.patlite.com http://www.patlite.com Full Color Display See More, Do More! Display a variety of colors in various ways to improve your processes. PATLITE innovation continues with improved functionality to drive productivity, improve efficiencies, and reduce waste. One of our basic themes is to help you make continuous improvements in your process. In order to make your lives more "comfortable", our theme of "Visual Information" has been a persistent one by making things easier to do. Here, we introduce the LA6 multi-informational signal tower. It can be easily manipulated to display various colors and combination of colors in various ways in order to communicate "visual information" in a manner that is intuitive and easy to understand. The applications are endless. As a pioneer manufacturer of information display equipment, we will strive to provide society the best products in order to meet your expectations for "Safety, Security, and Comfort". * Indicate abnormal conditions with a variety of color patterns. Can freely set up multiple colors. For example, a serious condition can be indicated with the "All-point Lighting" where the entire signal tower is the same color, thus conveying important information. * Use "Operating Modes" to enhance a visual status condition. The downloadable program can be used to make patterns change at set intervals so the signal tower can be used to count time or set a pace. * Simple and easy to use complimentary programming software The downloadable complimentary programming software can be used to easily control which colors are displayed and how they are to behave. "More active, more flexible and beautiful" "RevoliteTM" was made to redefine "light" and to make the environment more active, more beautiful, and more flexible. Separate Display Tact time Display 1 Gradition Display 2 Case File Case File "Factory / Production Line" See More to reduce downtime, improve productivity, and improve efficiency "Public / Institution" See More through intuitive, quietly visual, and reliable communication Time Trigger Type 5 min. Case1 Assembly Line 15 min. 25 min. Duration of Turntable Operation Case1 Check out the video on our website!! Productivity can be improved by assigning a task for each tier that is lit so that operators can know if they are on pace or not. No external controls are required to set up the takt time. Time Trigger Type Lighting Method: "Takt Time Display" Display elapsed time in "real time" by counting the number of tiers that are lit. Baggage Conveyors Check out the video on our website!! Flashing lights can help alert people that a baggage conveyor is about to start, thus reducing accidents. Different color lights can also be used to match airline colors so it's easier for passengers to know which carousel to go to. Lighting Method: "Sine Curve Display" Changing the light intensity allows for a more subtle way to communicate operation status. Simple Display Type Serious Error Case2 3 Processing Machine Slight Error Needs Maintenance Checkout Busy Case2 Check out the video on our website!! When there are many processing machines it is important that any trouble or need for maintenance is quickly communicated. This can be easily accomplished with predetermined color arrays, as shown on the example on the right. The various colors or intensity of colors will allow problems to be addressed quickly, thus improving productivity and reducing down time. Simple Display Type Lighting Method: "Detailed Error Display" The level of information (serious error, slight error) can be expressed colorfully. Check-out Registers Checkout Open Check out the video on our website!! Different colors can designate a busy or open checkout register in larger supermarkets. This allows customers to be able checkout quicker and balances cashier's workload. Special light patterns can also be used to communicate between cashiers and their supervisors or other employees. Lighting Method: "All-point Lighting Display" An "All-point Lighting Display" can use all sections of the LA6, such as displaying the light sequentially to simulate movement at a checkout register, and an all-solid color can be displayed when the lane is open. 4 View our videos at our exclusive site for more information. Features and various product operation modes can be viewed at our exclusive site (www.patlite.com/LA6). The contents introduce actual applications, ideas for applications, and wide-spread potential for this product. A new lens design optimizes visibility. An internal Mode Switch is available. The newly developed lens design efficiently diffuses LED light so that it is unmistakably visible, even from great distances. Use the internal mode switch to easily set up various functions, such as the alarm volume. Product Features Factory / Production Public/ Institutions Applications Case1 Q&A Assembly Line By rendering a visual task with the use of elapsed time in a product line, production can advance by checking whether work progress is relevant, and it contributes to an improvement in efficiency. Tact time setup does not require any external control programs, either. 5 min. 15 min. 25 min. Lighting Method: "Tact Time Display" Display working hour progress with a section number. Replacement Parts Case2 Processing Machine At the factory with many processing machines at work, the sign of trouble or periodic maintenance can be managed by displaying easily comprehensible color arrays to grasp the circumstance of Product Features Factory / Production Public/ Institutions Applications all equipment in a diverse "luminescence color", and stablize their Q&A operation. If an abrupt increase occurs, quick action based on information already displayed can be determined. Serious Error Slight Error Needs Maintenance Lighting Method: "Detailed Error Display" Freely change luminescence colors and patterns with editing software. The level of information (serious error, slight error) can be expressed colorfully. Exclusive Site/ Top Page Upload colors and patterns using the editing program to the signal tower using an USB cable* connected to a PC. * The USB cable is sold separately (USB microB type with Charging/ Data Transfer capability). * The website design may change without notice. Check out the video on our website!! Exclusive Site/ Application Page * Headcover Free editing software can be downloaded from our exclusive website. With the simple editing software available for free, a "luminescence color" and "luminescent pattern" are easily set-up. Sound Product Features Factory / Production Public/ Institutions Applications Q&A Product Features Factory / Production Public/ Institutions Applications Q&A * USB Port Cover Diffusion & Water Resistance Product Features Factory / Production Public/ Institutions Applications Q&A 4. Download Completed The alarm has a total of 11 sounds to match various applications. 1. Go to our exclusive website The water-resistant speaker design is able to play clear sounds of up to 85 dB (at 1m) despite it's compact size. Alarm sounds can be set up with every display pattern. 2. Download the Dedicated Software from the website 3. Customer registers on a registration page * Waterproof Ring `B' Easily set up an operation pattern. 1. The "Smart Mode" uses various colors to display information A. Single-display Type 31 luminescent patterns are stored in the unit's memory and can be set to on/off for 1-5 tiers. Off-white * Pole Bracket (with Waterproof Ring and Screws) B. Time-trigger Type Up to 15 groups of up to 63 patterns can be controlled as a continuous flow based on preset times. * Waterproof O-ring Dedicated software setup screen * 3 Tier Type * 5 Tier Type Pulse-trigger Type is activated by discrete inputs instead of time to progress from one pattern to the next, for up to 63 patterns. These can be grouped for up to 15 groups. Signal Tower Voltage: DC24V Alarm: 11 Sounds Wiring: 2 types (Screwless Terminal (TN)) or (Cable (LJ)) LED IP65 DC24V 2. "Signal Tower Mode" This mode simply displays information like a standard Signal Tower. 85dB Four new color selections are available in addition to the five standard luminescence colors. (at 1m) Lighting 5 Silver Off-white Silver Flashing/Alarm Off-white Silver Lighting Off-white Silver Flashing/Alarm Steel Pole Type (L J) 3 Tier Type 5 Tier Type 60 Set-up data can be downloaded. Alarm type is rated at IP54. Off-white C. Pulse-trigger Type * The interface design may be changed without advanced notice. Several pre-programmed patterns can be uploaded to the unit from the "Information Set." 6