Pu l s e Ja c k TM
Extended Temperature products
for Industrial Applications
Enhanced EMI performance for Non-AutoMDIX and AutoMDIX option
Fully IEEE803.2 Compliant over entire temperature range -40°C to +85°C
Peak solder temperature: 260°C
Industry standard RJ-45 and compatible pin out with Existing PulseJacks
Electrical Specifications @ 25°C — Operating Temperature -40°C to +85°C
Insertion Return Loss Common Mode
RoHS-6
Turns Mech. EMI LEDs Loss (dB TYP) Crosstalk Rejection Hipot
Part No.
Ratios
Drawing Fingers (L/R) (dB TYP) 100W ±15W (dB TYP) (dB TYP) (Vrms)
TX RX 1-65 1-10 10-30 30-60 60-80 1-30 30-60 60-100 1-50 50-130 @60Hz
MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz 1 MIN
JX0011D21NL 1CT:1 1CT:1 A YES N/A -1 -20 -16 -12 -10 -40 -35 -30 -30 -20 1500
JX0011D21BNL 1CT:1 1CT:1 B YES G/Y -1 -20 -16 -12 -10 -40 -35 -30 -30 -20 1500
JX0026D21NL 1CT:1 1CT:1 A YES N/A -1 -20 -16 -12 -10 -40 -35 -30 -30 -20 1500
JX0026D21BNL 1CT:1 1CT:1 B YES G/Y -1 -20 -16 -12 -10 -40 -35 -30 -30 -20 1500
Notes: 1. LEDs Left/Right: G=green, Y=yellow, N/A=none
Mating Force Unmating Force Plug to Jack
Part Number (MAX) (MAX) Durability Retention (MIN)
JX0 Series 5 lbs./2.268 kgs. 5 lbs./2.268 kgs. 750 Insertions 20 lbs./9.072 kgs.
RJ45 Durability Testing Rating
Notes: 1. Connector dimensions comply with FCC dimension requirements. 2. MSL = Moisture Sensitivity Level rating from 1 to 5 (highest rating = 1, lowest rating = 5)
Part Shield Contact
Housing MSL 2
Number Material Finish Material Plating Area Solder Area
Material Specification Rating
JX0
10-20m inches Nickel over Phosphor Nickel underplating and Tin Matte finish
Series Brass 10-20m inches Brass Bronze selective gold plating 15µ inches over Nickel Thermoplastic UL 94 V-0 1
RJ45 Material Specification
JX0 Series Electrical Schematics
�
JX0011
�
JX0026
Yellow 585nm 2.5V 2.1V
Green 565nm 2.5V 2.2V
Standard Wavelength Forward (TYP)
LED V(MAX)
LED Configuration
J426.C (03/19)
1Networking.PulseElectronics.com
Pu l s e Ja c k TM
Extended Temperature products
for Industrial Applications
JX0 Series Mechanicals
B
Dimensions: Inches
mm
Unless otherwise specified,
all tolerances are ± .010
0,25
A
2Networking.PulseElectronics.com J426.C (03/19)
For More Information:
Americas - prodinfonetworkamericas@pulseelectronics.com | Europe - comms-Apps-Europe@pulseelectronics.com | Asia - prodinfonetworkapac@pulseelectronics.com
Performance warranty of products offered on this data sheet is limited to the parameters specified. Data is subject to change without notice. Other brand and product names mentioned herein may
be trademarks or registered trademarks of their respective owners. © Copyright, 2019. Pulse Electronics, Inc. All rights reserved.
