PulseJack TM Extended Temperature products for Industrial Applications Enhanced EMI performance for Non-AutoMDIX and AutoMDIX option Fully IEEE803.2 Compliant over entire temperature range -40C to +85C Peak solder temperature: 260C Industry standard RJ-45 and compatible pin out with Existing PulseJacks Electrical Specifications @ 25C -- Operating Temperature -40C to +85C Turns Ratios RoHS-6 Part No. Mech. Drawing EMI Fingers Insertion Loss (dB TYP) LEDs (L/R) 1-65 MHz TX RX Return Loss (dB TYP) 100W 15W 1-10 MHz 10-30 MHz 30-60 MHz Crosstalk (dB TYP) 60-80 MHz 1-30 MHz 30-60 MHz 60-100 MHz Common Mode Rejection (dB TYP) Hipot (Vrms) 1-50 MHz @60Hz 1 MIN 50-130 MHz JX0011D21NL 1CT:1 1CT:1 A YES N/A -1 -20 -16 -12 -10 -40 -35 -30 -30 -20 1500 JX0011D21BNL 1CT:1 1CT:1 B YES G/Y -1 -20 -16 -12 -10 -40 -35 -30 -30 -20 1500 JX0026D21NL 1CT:1 1CT:1 A YES N/A -1 -20 -16 -12 -10 -40 -35 -30 -30 -20 1500 JX0026D21BNL 1CT:1 1CT:1 B YES G/Y -1 -20 -16 -12 -10 -40 -35 -30 -30 -20 1500 Notes: 1. LEDs Left/Right: G=green, Y=yellow, N/A=none Part Number Mating Force (MAX) JX0 Series 5 lbs./2.268 kgs. RJ45 Durability Testing Rating Unmating Force (MAX) Durability Plug to Jack Retention (MIN) 5 lbs./2.268 kgs. 750 Insertions 20 lbs./9.072 kgs. RJ45 Material Specification Shield Finish Contact Housing Material Material Plating Area Solder Area Material Specification JX0 10-20m inches Nickel over Phosphor Nickel underplating and Tin Matte finish Brass Thermoplastic UL 94 V-0 Series 10-20m inches Brass Bronze selective gold plating 15 inches over Nickel Part Number MSL 2 Rating 1 Notes: 1. Connector dimensions comply with FCC dimension requirements. 2. MSL = Moisture Sensitivity Level rating from 1 to 5 (highest rating = 1, lowest rating = 5) JX0 Series Electrical Schematics JX0011 1 Networking.PulseElectronics.com LED Configuration JX0026 Standard Forward Wavelength LED V(MAX) (TYP) Yellow 585nm Green 565nm 2.5V 2.5V 2.1V 2.2V J426.C (03/19) PulseJack TM Extended Temperature products for Industrial Applications JX0 Series Mechanicals A B Dimensions: Inches mm Unless otherwise specified, all tolerances are .010 0,25 For More Information: Americas - prodinfonetworkamericas@pulseelectronics.com | Europe - comms-Apps-Europe@pulseelectronics.com | Asia - prodinfonetworkapac@pulseelectronics.com Performance warranty of products offered on this data sheet is limited to the parameters specified. Data is subject to change without notice. Other brand and product names mentioned herein may be trademarks or registered trademarks of their respective owners. (c) Copyright, 2019. Pulse Electronics, Inc. All rights reserved. 2 Networking.PulseElectronics.com J426.C (03/19)