LCA710 Single Pole, Normally Open OptMOS(R) Relay INTEGRATED CIRCUITS DIVISION Parameter Blocking Voltage Load Current On-Resistance (max) Rating 60 1 0.5 Units VP Arms / ADC Features * Low On-Resistance: 0.5 * High Current Handling Capability: 1A * 3750Vrms Input/Output Isolation * Low Drive Power Requirements (TTL/CMOS Compatible) * No Moving Parts * High Reliability * Arc-Free With No Snubbing Circuits * No EMI/RFI Generation * Small 6-Pin Packages * Machine Insertable, Wave Solderable * Surface Mount and Tape & Reel Versions Available Applications * Instrumentation * Multiplexers * Data Acquisition * Electronic Switching * I/O Subsystems * Meters (Watt-Hour, Water, Gas) * Medical Equipment--Patient/Equipment Isolation * Security * Aerospace * Industrial Controls Description The LCA710 is a 60V, 1A, 0.5, normally open (1-Form-A) solid state relay featuring low on-resistance and high current handling capability. It uses optically coupled MOSFET technology to provide 3750Vrms of input to output isolation. Its optically coupled outputs, which use the patented OptoMOS architecture, are controlled by a highly efficient GaAIAs infrared LED. The LCA710 can be used to replace mechanical relays, and offers the superior reliability associated with semiconductor devices. Because it has no moving parts, it can offer faster, bounce-free switching in a more compact surface mount or thru-hole package. Approvals * UL Recognized Component: File E76270 * CSA Certified Component: Certificate 1175739 * EN/IEC 60950-1 Certified Component: TUV Certificate B 09 07 49410 004 Ordering Information Part # LCA710 LCA710R LCA710RTR LCA710S LCA710STR Description 6-Pin DIP (50/Tube) 6-Pin Lo-Profile Surface Mount (50/Tube) 6-Pin Lo-Profile Surface Mount (1000/Reel) 6-Pin Surface Mount (50/Tube) 6-Pin Surface Mount (1000/Reel) Switching Characteristics of Normally Open Devices Pin Configuration AC/DC Configuration 1 + Control - Control Do Not Use 6 2 5 3 4 Form-A Load Do Not Use IF Load 90% 10% ILOAD DC Only Configuration + Control - Control Do Not Use Pb DS-LCA710-R09 1 6 2 5 3 4 ton toff + Load - Load e3 www.ixysic.com 1 INTEGRATED CIRCUITS DIVISION LCA710 Absolute Maximum Ratings @ 25C Parameter Blocking Voltage Reverse Input Voltage Input Control Current Peak (10ms) Input Power Dissipation 1 Total Power Dissipation 2 Isolation Voltage, Input to Output Operational Temperature Storage Temperature 1 Derate linearly 1.33 mW / C 2 Derate linearly 6.67 mW / C Ratings 60 5 50 1 150 800 3750 -40 to +85 -40 to +125 Units VP V mA A mW mW Vrms C C Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at conditions beyond those indicated in the operational sections of this data sheet is not implied. Electrical Characteristics @ 25C Parameter Output Characteristics Load Current, Continuous AC/DC Configuration DC Configuration Peak Load Current On-Resistance AC/DC Configuration DC Configuration Off-State Leakage Current Switching Speeds Turn-On Turn-Off Output Capacitance Input Characteristics Input Control Current to Activate Input Control Current to Deactivate Input Voltage Drop Reverse Input Current Common Characteristics Input to Output Capacitance 2 Conditions Symbol Min Typ Max Units - IL - - 1 1.8 5 Arms / ADC ADC AP t<10ms ILPK - 0.3 0.1 - 0.5 0.15 1 ILEAK - VL=0V, f=1MHz ton toff - - 105 2.5 0.25 - IL=1A IF=10mA VR=5V IF IF VF IR 0.4 0.9 - 0.7 1.2 - 10 1.4 10 mA mA V A - CI/O - 3 - pF IL=1A IL=1.8A VL=60VP IF=10mA, VL=10V RON www.ixysic.com A ms pF R09 INTEGRATED CIRCUITS DIVISION LCA710 PERFORMANCE DATA @25C (Unless Otherwise Noted)* Typical LED Forward Voltage Drop (N=50, IF=10mA) Typical Turn-On Time (N=50, IF=10mA, IL=1ADC) Device Count (N) 25 20 15 10 5 25 20 20 15 10 5 0 0 1.17 25 1.19 1.21 1.23 15 10 5 0 1.25 0.24 0.27 0.30 0.33 0.36 0.39 0.078 0.083 0.088 0.093 0.098 0.103 LED Forward Voltage (V) Turn-On Time (ms) Turn-Off Time (ms) Typical IF for Switch Operation (N=50, IL=1ADC) Typical IF for Switch Dropout (N=50, IL=1ADC) Typical On-Resistance Distribution (N=50, IF=10mA, IL=1ADC) 25 20 Device Count (N) Device Count (N) 25 15 10 5 35 30 20 Device Count (N) Device Count (N) 30 Device Count (N) 35 Typical Turn-Off Time (N=50, IF=10mA, IL=1ADC) 15 10 5 0.90 0.95 1.00 1.05 1.10 20 15 10 5 0 0 25 0 0.90 1.15 0.95 1.00 1.05 1.10 1.15 0.215 LED Current (mA) LED Current (mA) 0.197 0.199 0.201 0.203 On-Resistance (:) 0.205 Typical Blocking Voltage Distribution (N=50) 35 Device Count (N) 30 25 20 15 10 5 0 72 IF=50mA IF=30mA IF=20mA IF=10mA 1.2 1.0 0.8 -40 -20 0 20 40 60 Temperature (C) 80 100 120 Typical Turn-Off Time vs. LED Forward Current (IL=1ADC) 0.09 2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0 0.08 Turn-Off Time (ms) Turn-On Time (ms) LED Forward Voltage Drop (V) 1.8 1.4 82 Typical Turn-On Time vs. LED Forward Current (IL=1ADC) Typical LED Forward Voltage Drop vs. Temperature 1.6 74 76 78 80 Blocking Voltage (VP) 0.07 0.06 0.05 0.04 0.03 0.02 0.01 0 0 5 10 15 20 25 30 35 Forward Current (mA) 40 45 50 0 5 10 15 20 25 30 35 40 45 50 LED Forward Current (mA) *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. R09 www.ixysic.com 3 INTEGRATED CIRCUITS DIVISION LCA710 PERFORMANCE DATA @25C (Unless Otherwise Noted)* Typical Turn-On Time vs. Temperature (IL=1ADC) 1.4 0.14 Turn-Off Time (ms) 0.8 0.6 IF=10mA 0.4 IF=10mA 0.08 0.06 IF=5mA 0.04 0.02 0.2 0 0 -40 -20 0 20 40 60 Temperature (C) 80 -40 100 Typical On-Resistance vs. Temperature (IF=10mA, IL=1ADC) 0.45 1000 800 600 400 200 0 -200 -400 -600 -800 -1000 -0.3 -20 0 20 40 60 Temperature (C) 80 100 Typical Load Current vs. Load Voltage (IF=10mA) 0.30 0.25 0.20 0.15 0.10 0.05 0 -40 -20 0 20 40 60 80 100 400 0 -0.1 0.1 0.2 -40 0.3 7 Leakage (PA) 0.017 0.016 0.015 0.014 0.013 0 20 40 60 Temperature (C) 80 100 0 20 40 60 80 100 120 Energy Rating Curve 0.018 -20 -20 Temperature (C) 80.0 0 -40 IF=5mA 600 8 73.0 -40 100 800 0.019 74.0 80 IF=10mA 1000 81.0 75.0 60 0 -0.2 Typical Leakage vs. Temperature Measured Across Pins 4&6 76.0 40 200 Typical Blocking Voltage vs. Temperature 77.0 20 1200 Load Voltage (V) 78.0 0 1400 Temperature (C) 79.0 -20 Maximum Load Current vs. Temperature Load Current (mA) 0.35 Typical IF for Switch Operation vs. Temperature (IL=1ADC) Temperature (C) Load Current (mA) 0.40 On-Resistance (:) 0.10 1.01 1.00 0.99 0.98 0.97 0.96 0.95 0.94 0.93 0.92 0 -40 Load Current (A) Turn-On Time (ms) IF=5mA 1.0 LED Current (mA) 0.12 1.2 Blocking Voltage (VP) Typical Turn-Off Time vs. Temperature (IL=1ADC) 6 5 4 3 2 1 -20 0 20 40 60 Temperature (C) 80 100 0 10Ps 100Ps 1ms 10ms 100ms 1s 10s 100s Time *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. 4 www.ixysic.com R09 INTEGRATED CIRCUITS DIVISION LCA710 Manufacturing Information Moisture Sensitivity All plastic encapsulated semiconductor packages are susceptible to moisture ingression. IXYS Integrated Circuits Division classified all of its plastic encapsulated devices for moisture sensitivity according to the latest version of the joint industry standard, IPC/JEDEC J-STD-020, in force at the time of product evaluation. We test all of our products to the maximum conditions set forth in the standard, and guarantee proper operation of our devices when handled according to the limitations and information in that standard as well as to any limitations set forth in the information or standards referenced below. Failure to adhere to the warnings or limitations as established by the listed specifications could result in reduced product performance, reduction of operable life, and/or reduction of overall reliability. This product carries a Moisture Sensitivity Level (MSL) rating as shown below, and should be handled according to the requirements of the latest version of the joint industry standard IPC/JEDEC J-STD-033. Device Moisture Sensitivity Level (MSL) Rating LCA710 / LCA710R / LCA710S MSL 1 ESD Sensitivity This product is ESD Sensitive, and should be handled according to the industry standard JESD-625. Reflow Profile This product has a maximum body temperature and time rating as shown below. All other guidelines of J-STD-020 must be observed. Device Maximum Temperature x Time LCA710 / LCA710R / LCA710S 250C for 30 seconds Board Wash IXYS Integrated Circuits Division recommends the use of no-clean flux formulations. However, board washing to remove flux residue is acceptable. Since IXYS Integrated Circuits Division employs the use of silicone coating as an optical waveguide in many of its optically isolated products, the use of a short drying bake could be necessary if a wash is used after solder reflow processes. Chlorine- or Fluorine-based solvents or fluxes should not be used. Cleaning methods that employ ultrasonic energy should not be used. Pb R09 e3 www.ixysic.com 5 INTEGRATED CIRCUITS DIVISION LCA710 MECHANICAL DIMENSIONS LCA710 8.382 0.381 (0.330 0.015) PCB Hole Pattern 7.239 TYP (0.285 TYP) 2.54 0.127 (0.100 0.005) 6 - 0.800 DIA. (6 - 0.031 DIA.) 2.540 0.127 (0.100 0.005) 9.144 0.508 (0.360 0.020) 6.350 0.127 (0.250 0.005) 7.620 0.127 (0.300 0.005) Pin 1 7.620 0.254 (0.300 0.010) 1.651 0.254 (0.065 0.010) 3.302 0.051 (0.130 0.002) 0.254 0.0127 (0.010 0.0005) 6.350 0.127 (0.250 0.005) 5.080 0.127 (0.200 0.005) 4.064 TYP (0.160 TYP) Dimensions mm (inches) 0.457 0.076 (0.018 0.003) LCA710R 8.382 0.381 (0.330 0.015) 9.525 0.254 (0.375 0.010) PCB Land Pattern 0.635 0.127 (0.025 0.005) 2.54 0.127 (0.100 0.005) 6.350 0.127 (0.250 0.005) 2.54 (0.10) 7.620 0.254 (0.300 0.010) 8.90 (0.3503) 1.70 (0.061) Pin 1 0.254 0.0127 (0.010 0.0005) 1.523 0.051 (0.060 0.002) 1.65 (0.0649) 1.651 0.254 (0.065 0.010) 3.302 0.051 (0.130 0.002) Dimensions mm (inches) 0.178 0.076 (0.007 0.003) LCA710S 8.382 0.381 (0.330 0.015) 9.524 0.508 (0.375 0.020) Pin 1 0.635 0.127 (0.025 0.005) PCB Land Pattern 2.54 0.127 (0.100 0.005) 2.54 (0.10) 6.350 0.127 (0.250 0.005) 0.457 0.076 (0.018 0.003) 1.651 0.254 (0.065 0.010) 7.620 0.254 (0.300 0.010) 0.254 0.0127 (0.010 0.0005) 8.90 (0.3503) 1.65 (0.0649) 0.65 (0.0255) 3.302 0.051 (0.130 0.002) 4.445 0.254 (0.175 0.010) Dimensions mm (inches) 1.651 0.254 (0.065 0.010) 6 www.ixysic.com R09 INTEGRATED CIRCUITS DIVISION LCA710 LCA710RTR & LCA710STR Tape & Reel 330.2 Dia (13.00 Dia) Top Cover Tape Thickness 0.102 Max (0.004 Max) W=16.00 (0.63) B0 = 10.10 (0.398) K0 = 4.90 (0.19) K1 = 3.80 (0.15) P = 12.00 (0.472) User Direction of Feed Embossed Carrier Embossment A0 = 10.10 (0.398) Dimensions mm (inches) NOTES: 1. All dimensions carry tolerances of EIA Standard 481-2 2. The tape complies with all "Notes" for constant dimensions listed on page 5 of EIA-481-2 For additional information please visit our website at: www.ixysic.com IXYS Integrated Circuits Division makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in IXYS Integrated Circuits Division's Standard Terms and Conditions of Sale, IXYS Integrated Circuits Division assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right. The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other applications intended to support or sustain life, or where malfunction of IXYS Integrated Circuits Division's product may result in direct physical harm, injury, or death to a person or severe property or environmental damage. IXYS Integrated Circuits Division reserves the right to discontinue or make changes to its products at any time without notice. 7 Specification: DS-LCA710-R09 (c)Copyright 2012, IXYS Integrated Circuits Division OptoMOS(R) is a registered trademark of IXYS Integrated Circuits Division All rights reserved. Printed in USA. 12/22/2012 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: IXYS: LCA710 LCA710S LCA710STR LCA710R LCA710RTR