Datasheet
• Advanced one-piece photoelectric sensors with outstanding optical performance
and extremely rugged design
• Operate from 90 to 250 V ac (50/60 Hz)
• SPDT electromechanical relay output for economical, high-capacity switching
and immunity to electrical noise
• Multiple sensing modes include: opposed, diffuse, retroreflective, and
convergent, plus glass and plastic fiber optic models
• Switchable light/dark operate
• Versatile plug-in modules available for output timing logic and/or signal
strength display
• Highly visible Power, Signal (AID™ System 1), and Output indicator LEDs
• Choice of prewired 2 m (6.5 ft) or 9 m (30 ft) unterminated cable or Mini-style
quick-disconnect fitting
• Versatile mounting options
• Designed to withstand 1200 psi washdown; exceeds its NEMA 6P and IEC IP67
rating
WARNING: Not To Be Used for Personnel Protection
Never use this device as a sensing device for personnel protection. Doing so could lead to
serious injury or death. This device does not include the self-checking redundant circuitry necessary
to allow its use in personnel safety applications. A sensor failure or malfunction can cause either an
energized or de-energized sensor output condition.
Opposed-Mode Emitter (E) and Receiver (R) Models
Because of their extremely high excess gain, these opposed-mode sensors are an excellent option
for sensing in contaminated or dirty areas, and are also the best choice for long-range sensing.
Range: 60 m (200 ft)
Output Type: SPDT Electro-mechanical relay
Effective Beam: 13 mm
OPPOSED
Infrared, 880 nm
Models Cable Excess Gain Beam Pattern
Q452E Emitter 2-wire 2 m (6.5 ft) cable
1
10
100
1.0 m
3.3 ft
10 m
33 ft
100 m
330 ft
0.1 m
0.33 ft
E
X
C
E
S
S
G
A
I
N
DISTANCE
1000
Q45E/R
Opposed Mode
48 m
160 ft
60 m
200 ft
36 m
120 ft
24 m
80 ft
12 m
40 ft
0
0
0.5 m
1.0 m
1.5 m
0.5 m
1.0 m
1.5 m
0
20 in
40 in
60 in
20 in
40 in
60 in
DISTANCE
Q45E/R
Opposed Mode
Q45VR2R Receiver 5-wire 2 m (6.5 ft) cable
Q452EQ Emitter 3-Pin Mini-style QD
Q45VR2RQ Receiver 5-Pin Mini-style QD
To order the 9 m (30 ft) cable models, add the suffix "W/30" to the cabled model number. (For example: Q452E W/30.)
Models with a quick disconnect (QD) connector require a mating cable.
1U.S. Patent no. 4356393
Q45VR2 Series Sensors
Original Document
36339 Rev. F 23 October 2014
36339
Retroreflective-Mode Models
The visible red sensing beam of these sensors makes them very easy to align. Model
Q45VR2LP polarizes the emitted light and filters out unwanted reflections, making
sensing possible in applications otherwise considered unsuited to retroreflective
sensing. Specified using the model BRT-3 3-inch reflector (see the Accessories section
of your current Banner catalog for further information).
Output Type: SPDT Electro-mechanical relay
RETRO
Visible red, 680 nm
(non-polarized)
P
POLAR RETRO
Visible red, 680 nm
(polarized)
Non-Polarized - Range 0.08 to 9 m (3 in to 30 ft)
Models Cable Excess Gain Beam Pattern
Q45VR2LV 5-wire 2 m (6.5 ft) cable
1
10
100
1000
.10 m
.33 ft
1.0 m
3.3 ft
10 m
33 ft
.01 m
.033 ft
E
X
C
E
S
S
G
A
I
N
DISTANCE
Q45LV
Retroreflective Mode
With BRT-3 Reflector
12 m
40 ft
15 m
50 ft
9 m
30 ft
6 m
20 ft
3 m
10 ft
0
0
25 mm
50 mm
75 mm
25 mm
50 mm
75 mm
0
1.0 in
2.0 in
3.0 in
1.0 in
2.0 in
3.0 in
DISTANCE
Q45LV
Retroreflective Mode
With BRT-3 Reflector
Q45VR2LVQ 5-Pin Mini-style QD
Polarized - Range 0.15 to 6 m (6 in to 20 ft)
Models Cable Excess Gain Beam Pattern
Q45VR2LP 5-wire 2 m (6.5 ft) cable
1
10
100
1000
.10 m
.33 ft
1.0 m
3.3 ft
10 m
33 ft
.01 m
.033 ft
E
X
C
E
S
S
G
A
I
N
DISTANCE
Q45LP
Retroreflective Mode
With BRT-3 Reflector
6 m
20 ft
7.5 m
25 ft
4.5 m
15 ft
3 m
10 ft
1.5 m
5 ft
0
0
25 mm
50 mm
75 mm
25 mm
50 mm
75 mm
0
1.0 in
2.0 in
3.0 in
1.0 in
2.0 in
3.0 in
DISTANCE
Q45LP
Retroreflective
Mode
With BRT-3 Reflector
Q45VR2LPQ 5-Pin Mini-style QD
To order the 9 m (30 ft) cable models, add the suffix "W/30" to the cabled model number. (For example: Q45VR2LV W/
30.) Models with a quick disconnect (QD) connector require a mating cable.
Q45VR2 Series Sensors
2 www.bannerengineering.com - Tel: +1-763-544-3164 P/N 36339 Rev. F
Diffuse-Mode Models
These diffuse-mode models detect objects by sensing the reflection of their own emitted light. Ideal for
use when the reflectivity and profile of the object to be sensed are sufficient to return a large percentage
of emitted light back to the sensor. Model Q45VR2DX is the first choice for diffuse-mode applications
when there are no background objects to falsely return light.
Performance curves are based on a 90% reflectance white test card.
Output Type: SPDT Electro-mechanical relay
DIFFUSE
Infrared, 880 nm
Short Range - 45 cm (18 inches)
Models Cable Excess Gain Beam Pattern
Q45VR2D 5-wire 2 m (6.5 ft) cable
500 mm
20.0 in
400 mm
16.0 in
300 mm
12.0 in
200mm
8.0 in
100 mm
4.0 in
0
0
5 mm
10 mm
15 mm
5 mm
10 mm
15 mm
0
0.2 in
0.4 in
0.6 in
0.2 in
0.4 in
0.6 in
DISTANCE
Q45D
Diffuse Mode
Q45VR2DQ 5-Pin Mini-style QD
Long Range - 1.8 m (6 ft)
Models Cable Excess Gain Beam Pattern
Q45VR2DL 5-wire 2 m (6.5 ft) cable
1
10
100
1000
.10 m
.33 ft
1.0 m
3.3 ft
10 m
33 ft
.01 m
.033 ft
E
X
C
E
S
S
G
A
I
N
DISTANCE
Q45DL
Diffuse Mode
2.4 m
8 ft
3.0 m
10 ft
1.8 m
6 ft
1.2 m
4 ft
0.6 m
2 ft
0
0
25 mm
50 mm
75 mm
25 mm
50 mm
75 mm
0
1.0 in
2.0 in
3.0 in
1.0 in
2.0 in
3.0 in
DISTANCE
Q45DL
Diffuse Mode
Q45VR2DLQ 5-Pin Mini-style QD
High Power - 3 m (10 ft) Range
Models Cable Excess Gain Beam Pattern
Q45VR2DX 5-wire 2 m (6.5 ft) cable
1
10
100
0.1 m
0.33 ft
1.0 m
3.3 ft
10 m
33 ft
0.01 m
0.033 ft
1000
E
X
C
E
S
S
G
A
I
N
DISTANCE
Q45DX
Diffuse Mode
3.0 m
10 ft
2.4 m
8 ft
1.8 m
6 ft
1.2 m
4 ft
0.6 m
2 ft
0
0
25 mm
50 mm
75 mm
25 mm
50 mm
75 mm
0
1.0 in
2.0 in
3.0 in
1.0 in
2.0 in
3.0 in
DISTANCE
Diffuse Mode
Q45DX
Q45VR2DXQ 5-Pin Mini-style QD
Q45VR2 Series Sensors
P/N 36339 Rev. F www.bannerengineering.com - Tel: +1-763-544-3164 3
Convergent-Mode Models
These sensors are ideal for reflective sensing of very small parts or profiles, and can accurately sense the
position of parts approaching from the side. Will ignore all but highly reflective objects that are outside
the sensing range.
Performance curves are based on a 90% reflectance white test card.
Output Type: SPDT Electro-mechanical relay
CONVERGENT
Visible red, 680 nm
Models Focus Cable Excess Gain Beam Pattern
Q45VR2CV
38 mm (1.5 in)
Spot Size at Focus:
1.3 mm (0.05 in)
5-wire 2 m (6.5 ft)
cable
1
10
100
10 mm
.4 in
100 mm
4 in
1000 mm
40 in
1 mm
.04 in
1000
E
X
C
E
S
S
G
A
I
N
DISTANCE
Q45CV
Convergent Mode
190 mm
7.5 in
150 mm
6.0 in
113 mm
4.5 in
75 mm
3.0 in
38 mm
1.5 in
0
0
1.2 mm
2.5 mm
3.8 mm
1.2 mm
2.5 mm
3.8 mm
0
0.05 in
0.10 in
0.15 in
0.05 in
0.10 in
0.15 in
DISTANCE
Q45CV
Convergent Mode
Q45VR2CVQ 5-Pin Mini-style QD
Q45VR2CV4
100 mm (4 in) Spot
Size at Focus: 1.5
mm (0.06 in)
5-wire 2 m (6.5 ft)
cable
1
10
100
10 mm
.4 in
100 mm
4 in
1000 mm
40 in
1 mm
.04 in
1000
E
X
C
E
S
S
G
A
I
N
DISTANCE
Q45CV4
Convergent Mode
190 mm
7.5 in
150 mm
6.0 in
113 mm
4.5 in
75 mm
3.0 in
38 mm
1.5 in
0
0
1.2 mm
2.5 mm
3.8 mm
1.2 mm
2.5 mm
3.8 mm
0
0.05 in
0.10 in
0.15 in
0.05 in
0.10 in
0.15 in
DISTANCE
Q45CV4
Convergent Mode
Q45VR2CV4Q 5-Pin Mini-style QD
To order the 9 m (30 ft) cable models, add the suffix "W/30" to the cabled model number. (For example: Q45VR2CV W/
30.) Models with a quick disconnect (QD) connector require a mating cable.
Q45VR2 Series Sensors
4 www.bannerengineering.com - Tel: +1-763-544-3164 P/N 36339 Rev. F
Glass Fiber Optic Models
These models are an excellent choice for glass fiber optic applications where faster sensor response is not
important. Their high excess gain means that opposed individual fibers can operate reliably in many very
hostile environments. Also, special miniature bifurcated fiber optic assemblies with bundle sizes as small as
0.5 mm (.020 in) dia. may be used successfully for diffuse-mode sensing when using sensor model
Q45VR2F(Q). For more information on compatible glass fiber optics, refer to your current catalog.
Diffuse mode performance curves are based on a 90% reflectance white test card.
Range: Range varies by sensing mode and fiber optics used.
Output Type: SPDT Electro-mechanical relay
GLASS FIBER
Infrared, 880 nm and
Visible red, 650 nm
Infrared, 880 nm
Models Cable Excess Gain Beam Pattern
Q45VR2F 5-wire 2 m (6.5 ft) cable
1
10
100
0.1 m
0.33 ft
1.0 m
3.3 ft
10 m
33 ft
0.01 m
0.03 ft
1000
E
X
C
E
S
S
G
A
I
N
DISTANCE
Q45F
Opposed Mode
IT23S Fibers
IT13S Fibers
1
10
100
10 mm
0.4 in
100 mm
4.0 in
1000 mm
40 in
1 mm
0.04 in
1000
E
X
C
E
S
S
G
A
I
N
DISTANCE
Q45F
Diffuse Mode
BT23S Fiber
BT13S Fiber
2.0 m
75 in
1.6 m
60 in
1.2 m
45 in
0.8 m
30 in
0.4 m
15 in
0
0
50 mm
100 mm
150 mm
50 mm
100 mm
150 mm
0
2.0 in
4.0 in
6.0 in
2.0 in
4.0 in
6.0 in
DISTANCE
Q45F
Opposed Mode
IT23S Fibers
IT13S Fibers
125 mm
5 in
100 mm
4 in
75 mm
3 in
50 mm
2 in
25 mm
1 in
0
0
1.3 mm
2.5 mm
3.8 mm
1.3 mm
2.5 mm
3.8 mm
0
0.05 in
0.10 in
0.15 in
0.05 in
0.10 in
0.15 in
DISTANCE
Q45F
Diffuse Mode
BT23S Fiber
BT13S Fiber
Q45VR2FQ 5-Pin Mini-style QD
Visible Red, 650 nm
Models Cable Excess Gain Beam Pattern
Q45VR2FV 5-wire 2 m (6.5 ft) cable
1
10
100
10 mm
0.4 in
100 mm
4 in
1000 mm
40 in
1.0 mm
0.04 in
1000
E
X
C
E
S
S
G
A
I
N
DISTANCE
Q45FV
Opposed Mode
IT23S Fibers
IT13S Fibers
1
10
100
10 mm
0.4 in
100 mm
4.0 in
1000 mm
40 in
1 mm
0.04 in
1000
E
X
C
E
S
S
G
A
I
N
DISTANCE
Q45FV
Diffuse Mode
BT23S Fiber
BT13S
Fiber
300 mm
12 in
250 mm
10 in
200 mm
8 in
150 mm
6 in
100 mm
4 in
0
0
10 mm
20 mm
30 mm
10 mm
20 mm
30 mm
0
0.4 in
0.8 in
1.2 in
0.4 in
0.8 in
1.2 in
DISTANCE
Q45FV
Opposed Mode
IT23S Fibers
IT13S Fibers
25 mm
1.0 in
20 mm
0.8 in
15 mm
0.6 in
10 mm
0.4 in
5 mm
0.2 in
0
0
1.0 mm
2.0 mm
3.0 mm
1.0 mm
2.0 mm
3.0 mm
0
0.04 in
0.08 in
0.12 in
0.04 in
0.08 in
0.12 in
DISTANCE
Q45FV
Diffuse Mode
BT23S Fiber
BT13S Fiber
Q45VR2FVQ 5-Pin Mini-style QD
Q45VR2 Series Sensors
P/N 36339 Rev. F www.bannerengineering.com - Tel: +1-763-544-3164 5
Plastic Fiber Optic Models
Lower in cost than glass fiber optics, plastic fiber optics are ideal for use in situations where environmental
conditions allow (for example, low levels of acids, alkalis, and solvents). Most are easily cut to length in the
field, and are available in a variety of sensing end styles. For more information on compatible plastic fiber
optics, refer to your current catalog.
Diffuse mode performance curves are based on a 90% reflectance white test card.
Range: Range varies by sensing mode and fiber optics used.
Output Type: SPDT Electro-mechanical relay
PLASTIC FIBER
Visible red, 660 nm
Models Cable Excess Gain Beam Pattern
Q45VR2FP 5-wire 2 m (6.5 ft) cable
1
10
100
10 mm
0.4 in
100 mm
4.0 in
1000 mm
40 in
1 mm
0.04 in
1000
E
X
C
E
S
S
G
A
I
N
DISTANCE
Q45FP
Opposed Mode
PIT46U Fibers
PIT26U Fibers
1
10
100
1 mm
0.04 in
10 mm
0.4 in
100 mm
4 in
0.1 mm
0.004 in
1000
E
X
C
E
S
S
G
A
I
N
DISTANCE
Q45FP
Diffuse Mode
PBT46U Fiber
PBT26U Fiber
125 mm
5.0 in
100 mm
4.0 in
75 mm
3.0 in
50 mm
2.0 in
25 mm
1.0 in
0
0
15 mm
30 mm
45 mm
15 mm
30 mm
45 mm
0
0.6 in
1.2 in
1.8 in
0.6 in
1.2 in
1.8 in
DISTANCE
Q45FP
Opposed Mode PIT46U Fibers
PIT26U Fibers
50 mm
2.0 in
40 mm
1.6 in
30 mm
1.2 in
20 mm
0.8 in
10 mm
0.4 in
0
0
6 mm
12 mm
18 mm
6 mm
12 mm
18 mm
0
0.25 in
0.50 in
0.75 in
0.25 in
0.50 in
0.75 in
DISTANCE
Q45FP
Diffuse Mode
PBT46U Fiber
Q45VR2FPQ 5-Pin Mini-style QD
To order the 9 m (30 ft) cable models, add the suffix "W/30" to the cabled model number. (For example: Q45VR2FP W/
30.) Models with a quick disconnect (QD) connector require a mating cable.
Overview
Status indicator LEDs for power, signal, and output are clearly visible beneath a raised dome in the sensor’s transparent o-
ring-sealed polycarbonate cover. Also located beneath the sensor’s o-ring-sealed cover are controls for light/dark operate
selection and the sensitivity adjustment.
• The power indicator (green) lights when power is applied to the sensor.
• The signal indicator (red) lights when the sensor sees its modulated light source and pulses at a rate proportional
to the strength of the received light signal; this is the AID™ Alignment Indicating Device2.
• The output indicator (amber) lights when the sensor’s output is conducting. This indicator is especially useful when
a timing logic module is used and signal and output conditions are not concurrent.
1
3
4
5
6
2
1. Sensitivity adjustment
2. LEDs• Green LED: Power on indicator
• Red LED: Signal indicator
• Amber LED: Output status indicator
3. Optional LED signal strength display
4. Optional timing adjustment
5. Optional timing adjustment
6. Light/dark operate switch
2US patent no. 4356393
Q45VR2 Series Sensors
6 www.bannerengineering.com - Tel: +1-763-544-3164 P/N 36339 Rev. F
Specifications
Supply Voltage and Current
90 to 250 V ac (50/60 Hz)
Average current 20 mA
Peak current 500 mA at 120 V ac, 750 mA at 250 V ac
Supply Protection Circuitry
Protected against transient voltages
Output Configuration
SPDT (Single-Pole Double-Throw) electromechanical relay output. All
models except emitters.
Output Rating
Max. switching power (resistive load): 150 W, 600 VA
Max. switching voltage (resistive load): 250 V ac, 30 V dc
Max. switching current (resistive load): 5 A at 250 V ac
Min. voltage and current: 5 V dc, 0.1 mA
Mechanical life of relay: 10,000,000 operations
Electrical life of relay at full resistive load: 100,000 operations
Output Protection Circuitry
Protected against false pulse on power-up
Output Response Time
15 milliseconds ON and OFF
(NOTE: 100 millisecond delay on power-up. Output is de-energized
during this time.)
Environmental Rating
NEMA 6P, IEC IP67
Operating Conditions
Temperature: –40 °C to 70 °C (–40 °F to 158 °F)
Maximum relative humidity: 90% at 50 °C (non-condensing)
Certifications
Repeatability
Opposed mode: 0.25 milliseconds
All other sensing modes: 0.5 milliseconds
Response time and repeatability specifications are independent of
signal strength.
Adjustments
Light/Dark Operate select switch and multi-turn Sensitivity control
(allows precise sensitivity setting – turn clockwise to increase gain).
Optional logic and logic/display modules have adjustable timing
functions.
Indicators
Indicator LEDs are clearly visible beneath a raised transparent Lexan®
dome on top of the sensor
Power (green) LED lights when 90 to 250 V ac power is applied
Signal (red) AID™ System LED lights when the sensor sees its
modulated light source and pulses at a rate proportional to the strength
of the received light signal
Load (amber) LED lights whenever the output relay is energized
Optional 7-element LED signal strength display modules
Construction
Molded reinforced thermoplastic polyester housing, o-ring-sealed
transparent polycarbonate cover, molded acrylic lenses, and stainless
steel hardware. Q45s are designed to withstand 1200 psi washdown.
The base of cabled models has a 1/2-inch NPS integral internal conduit
thread.
Connections
PVC-jacketed 2-wire (emitters) or 5-wire (all others) 2 m (6.5 ft) or 9
m (30 ft) unterminated cables, or 3-pin (emitters) or 5-pin (all others)
Mini-style quick-disconnect (QD) fittings are available (“Q” - suffix
models).
QD cables are ordered separately.
Application Notes
Transient suppression is recommended for contacts switching inductive
loads.
Optional output timing modules are available.
Dimensions
Opposed, Retro, and Diffuse Sensing Modes (Model Suffix E, R, D, DL, DX, LP, and LV)
Cabled Models Quick-Disconnect Models
54.1 mm
(2.13")
44.5 mm
(1.75")
69.0 mm
(2.72")
87.6 mm
(3.45")
Internal Thread
(1/2–14NPSM)
30.0 mm
(1.18")
ø 6.1 (0.24")
2m (6.5') Cable
7.1 mm
(0.28")
4.5 mm (#10) Screw
Clearance (2)
50.8 mm
(2.00")
6.4 mm (0.25")
Lens Centerline
Transparent Cover (Gasketed)
View: Output Load Status
Open to Access: Sensitivity (Gain)
Adjustment
External thread (M30 x 1.5)
hex nut supplied
External Thread
M30 X 1.5
Mini-style QD Connector
14 mm (0.6")
Q45VR2 Series Sensors
P/N 36339 Rev. F www.bannerengineering.com - Tel: +1-763-544-3164 7
Convergent Sensor Models
(CV and CV4)
Glass Fiber Optic Models
(F and FV)
Plastic Fiber Optic Models
(FP)
61.7 mm
(2.43")
60.5 mm
(2.38")
59.9 mm
(2.36")
Wiring Diagrams
Sensors with Attached Cable Sensors with Quick-Disconnect 5-Pin
Mini-Style (model suffix Q) Wire Colors
2
3
5NC
C
NO
4
1
90–250 V ac
NC
C
NO
2
3
5
4
1
90–250 V ac
1 - Black
2 - Blue
3 - Yellow
4 - Brown
5 - White
Q452E Emitter with Attached Cable Q452E Emitter with Quick-Disconnect
3-Pin Mini-Style (model suffix Q) Wire Colors
1
3
90–250 V ac
1
4
390–250 V ac
1 - Brown
3 - Blue
4 - Black
Q45VR2 Series Sensors
8 www.bannerengineering.com - Tel: +1-763-544-3164 P/N 36339 Rev. F
Accessories
3-Pin Mini-Style Cordsets
Model Length Style Dimensions Pinout
MBCC-306 2 m (6.5 ft) Straight
7/8-16UN-2B
ø 2.5 mm
typ.
52 mm
typ.
2
3
1
1 = Black
2 = Brown
3 = Blue
MBCC-312 3.66 m (12 ft)
MBCC-330 9.14 m (30 ft)
5-Pin Mini-Style Cordsets
Model Length Style Dimensions Pinout (Female)
MBCC-506 1.83 m (6 ft)
Straight
7/8-16UN-2B
ø 2.5 mm
typ.
52 mm
typ.
1
2
4
3
5
1 = Black
2 = Blue
3 = Yellow
4 = Brown
5 = White
MBCC-512 3.66 m (12 ft)
MBCC-530 9.14 m (30 ft)
NOTE: For a complete selection of retroreflective targets, see www.bannerengineering.com.
Brackets
SMB30C
• 30 mm split clamp, black
PBT bracket
• Stainless steel mounting
hardware included
• Mounting hole for 30 mm
sensor
66
56
13
A
B
Hole center spacing: A=ø 45
Hole size: B=ø 27.2
SMB30MM
• 12-ga. stainless steel bracket
with curved mounting slots
for versatile orientation
• Clearance for M6 (¼ in)
hardware
• Mounting hole for 30 mm
sensor
70
57
A
B
C
57
Hole center spacing: A = 51, A to B = 25.4
Hole size: A = 42.6 x 7, B = ø 6.4, C = ø 30.1
SMB30SC
• Swivel bracket with 30 mm
mounting hole for sensor
• Black reinforced
thermoplastic polyester
• Stainless steel mounting and
swivel locking hardware
included
67
58
29
B
A
Hole center spacing: A=ø 50.8
Hole size: A=ø 7.0, B=ø 30.0
Q45VR2 Series Sensors
P/N 36339 Rev. F www.bannerengineering.com - Tel: +1-763-544-3164 9
Output Timing Logic and Signal Strength Display Modules
Q45 sensors easily accept the addition of output timing logic and signal strength display functions. Display modules have a
seven-element display that gives a more precise indication of excess gain than does the AID™ system LED that is standard
on Q45 sensors. The modules listed below may be used with all Q45VR2 sensors. Refer to the module's datasheet for more
information.
Models Logic and/or Display Function
45LM58 Programmable output timing logic
45LM58D Programmable output timing logic plus signal strength display
45LMD Signal strength display only (no timing function)
Banner Engineering Corp Limited Warranty
Banner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year following
the date of shipment. Banner Engineering Corp. will repair or replace, free of charge, any product of its manufacture
which, at the time it is returned to the factory, is found to have been defective during the warranty period. This warranty
does not cover damage or liability for misuse, abuse, or the improper application or installation of the Banner product.
THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS OR
IMPLIED (INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE), AND WHETHER ARISING UNDER COURSE OF PERFORMANCE, COURSE OF DEALING OR
TRADE USAGE.
This Warranty is exclusive and limited to repair or, at the discretion of Banner Engineering Corp., replacement. IN NO
EVENT SHALL BANNER ENGINEERING CORP. BE LIABLE TO BUYER OR ANY OTHER PERSON OR ENTITY FOR
ANY EXTRA COSTS, EXPENSES, LOSSES, LOSS OF PROFITS, OR ANY INCIDENTAL, CONSEQUENTIAL OR
SPECIAL DAMAGES RESULTING FROM ANY PRODUCT DEFECT OR FROM THE USE OR INABILITY TO USE THE
PRODUCT, WHETHER ARISING IN CONTRACT OR WARRANTY, STATUTE, TORT, STRICT LIABILITY,
NEGLIGENCE, OR OTHERWISE.
Banner Engineering Corp. reserves the right to change, modify or improve the design of the product without assuming any
obligations or liabilities relating to any product previously manufactured by Banner Engineering Corp.
Q45VR2 Series Sensors
www.bannerengineering.com - Tel: +1-763-544-3164