Relay Socket for Industrial Relay 1/2 for Relay (2 and 4 changeover contacts) Data sheet 42 A2 32 22 A1 12 Item-No. Description Relay socket for 2 and 4 CO industrial relays 858-100 * Relay socket for DIN 35 carrier rails. Technical Data * For industrial relays with standard pinning. * Contact side and coil connections are separated from each other. Input nominal voltage UN max. switching voltage max. continuous current * Status indication through pluggable LED module (red). (Accessory). * CAGE CLAMP(R) CCSC connection. * Quick exchange of the relay and the status indication during maintenance, without having to detach the wiring. * Safe electrical isolation in accordance with DIN VDE 0140 Part 1. (Relay-dependently) 44 41 34 24 14 31 21 11 Pack.-unit pcs 1 Relay-dependently, max. AC 250 V AC 250 V 4 x 8 A (4 changeover contacts) 2 x 12 A (2 changeover contacts) AC 4000 VA 100 % continuous duty max. switching power Operation at normal rating Dielectric strength contact/coil (1.2/50 s) 4 kV (Relay-dependently) Nominal voltage acc. to VDE 0110 Part1 / 4.97 IEC 60664-1 250 V / 4 kV / 2 Degree of protection IP 20 Ambient operating temperature -25 C ... +70 C (Relay-dependently) Storage temperature -40 C ... +80 C Dimensions (WxHxD) (31 x 39* x 97) mm (Relay-dependently) * from upper edge of DIN 35 rail Note: Inductive loads have to be attenuated by an appropriate protective circuit in order to protect relay coils and contacts ! WAGO Kontakttechnik GmbH & Co. KG Subject to design changes 10.11.2009 / dt10000e.doc Postfach 2880 * D-32385 Minden Hansastr. 27 * D-32423 Minden Tel.: Fax.: 05 71 / 8 87-0 E-Mail: 05 71 / 8 87-169 Web: info@wago.com http://www.wago.com Relay Socket for Industrial Relay 2/2 for Relay (2 and 4 changeover contacts) Data sheet Wire connection Retaining clip (Accessory) CAGE CLAMP(R) CCSC 0.34-1.5 mm / AWG 22-16 9-10 mm / 0.37 in Stripped length Standards / prescriptions Accessories: Retaining clip for relay Operation indicator DC 24 V Operation indicator AC 115 V Operation indicator AC 230 V Relay: 1. Industrial relay Indicator (Accessory) 2. Industrial relay 3. Industrial relay 4. Industrial relay Relay (Accessory) WAGO Kontakttechnik GmbH & Co. KG Subject to design changes 10.11.2009 / dt10000e.doc Postfach 2880 * D-32385 Minden Hansastr. 27 * D-32423 Minden Tel.: Fax.: IEC60664 / IEC60664A / DIN VDE0110 Pollution degree 2 Overvoltage category 2 858-110 788-120 788-124 788-125 858-150 4 changeover contacts coil DC24 V 28 x 21 mm, max. 36 mm height e.g. Hongfa JZX 858-151 4 changeover contacts coil AC230 V 28 x 21 mm, max. 36 mm height e.g. Hongfa JZX 858-152 4 changeover contacts coil DC24 V (Au) 28 x 21 mm, max. 36 mm height e.g. Hongfa JZX 858-153 4 changeover contact coil AC230V (Au) 28 x 21 mm, max. 36 mm height e.g. Hongfa JZX 05 71 / 8 87-0 E-Mail: 05 71 / 8 87-169 Web: info@wago.com http://www.wago.com