Relay Socket for Industrial Relay 1/2
for Relay (2 and 4 changeover contacts) Data sheet
WAGO Kontakttechnik GmbH & Co. KG Postfach 2880 • D-32385 Minden Tel.: 05 71 / 8 87-0 E-Mail: info@wago.com
Hansastr. 27 • D-32423 Minden Fax.: 05 71 / 8 87-169 Web: http://www.wago.com
Subject to design changes
10.11.2009 / dt10000e.doc
41
31
21
11
44
34
24
14
42
32
22
12
A1
A2
Description Item-No. Pack.-unit
pcs
Relay socket for 2 and 4 CO industrial relays
858-100 1
• Relay socket for DIN 35 carrier rails.
• For industrial relays with standard pinning.
• Contact side and coil connections are separated from
each other.
• Status indication through pluggable LED module (red).
(Accessory).
• CAGE CLAMP® CCSC connection.
• Quick exchange of the relay and the status indication
during maintenance, without having to detach the wiring.
• Safe electrical isolation in accordance with DIN VDE 0140
Part 1. (Relay-dependently)
Note: Inductive loads have to be attenuated by
an appropriate protective circuit in order to
protect relay coils and contacts !
Technical Data
Input nominal voltage UN Relay-dependently, max. AC 250 V
max. switching voltage AC 250 V
max. continuous current 4 x 8 A (4 changeover contacts)
2 x 12 A (2 changeover contacts)
max. switching power AC 4000 VA
Operation at normal rating 100 % continuous duty
Dielectric strength
contact/coil (1.2/50 µs) 4 kV (Relay-dependently)
Nominal voltage acc. to
VDE 0110 Part1 / 4.97
IEC 60664-1 250 V / 4 kV / 2
Degree of protection IP 20
Ambient operating temperature -25 °C ... +70 °C (Relay-dependently)
Storage temperature -40 °C ... +80 °C
Dimensions (WxHxD) (31 x 39* x 97) mm (Relay-dependently)
* from upper edge of DIN 35 rail
Relay Socket for Industrial Relay 2/2
for Relay (2 and 4 changeover contacts) Data sheet
WAGO Kontakttechnik GmbH & Co. KG Postfach 2880 • D-32385 Minden Tel.: 05 71 / 8 87-0 E-Mail: info@wago.com
Hansastr. 27 • D-32423 Minden Fax.: 05 71 / 8 87-169 Web: http://www.wago.com
Subject to design changes
10.11.2009 / dt10000e.doc
Retaining clip (Accessory)
Indicator (Accessory)
Relay (Accessory)
Wire connection CAGE CLAMP® CCSC
0.34-1.5 mm² / AWG 22-16
Stripped length 9-10 mm / 0.37 in
Standards / prescriptions IEC60664 / IEC60664A / DIN VDE0110
Pollution degree 2
Overvoltage category 2
Accessories:
Retaining clip for relay 858-110
Operation indicator DC 24 V 788-120
Operation indicator AC 115 V 788-124
Operation indicator AC 230 V 788-125
Relay:
1. Industrial relay 858-150
4 changeover contacts coil DC24 V
28 x 21 mm, max. 36 mm height
e.g. Hongfa JZX
2. Industrial relay 858-151
4 changeover contacts coil AC230 V
28 x 21 mm, max. 36 mm height
e.g. Hongfa JZX
3. Industrial relay 858-152
4 changeover contacts coil DC24 V (Au)
28 x 21 mm, max. 36 mm height
e.g. Hongfa JZX
4. Industrial relay 858-153
4 changeover contact coil AC230V (Au)
28 x 21 mm, max. 36 mm height
e.g. Hongfa JZX
