||||||||||| | | | |
LXZTS series
APPLICATIONS:
FEATURES:
Size varies
RoHS
Compliant
STANDARD SPECIFICATIONS:
30332
Esperanza, Rancho Santa Margarita, California
92688
tel 949-546-8000 | fax 949-546-8001| www.abracon.com
Revised: 12.29.10
Visit
www.abracon.com
for Terms & Conditions of Sale
Pb in ceramic
(exempt per RoHS 2002/95/EC Annex (7))
TEST CIRCUIT:
CERTIFIED
ABRACON IS
CERTIFIED
ABRACON IS
ISO9001:2008
CERTIFIED
* Components shall be left in a chamber of +85±2°C for 1000 hours, and then measured after leaving in natural condition for 1 hour.
Table 1
Frequency (kHz) Frequency Accuracy Resonant Impedance R0 (Ω)
400 ±2.0 (kHz) 20
455 ±2.0 (kHz) 20
500 ±2.0 (kHz) 20
600 ±2.0 (kHz) 30
07 )%( 5.0± 008
001 )%( 5.0± 0001
Parameters Minimum Typical Maximum Units Notes
Standard Frequencies (Fosc) 400, 455, 500, 600, 800, 1000 kHz Please contact Abracon for
other frequencies
1 elbaT eeS ycaruccA ycneuqerF
Resonant Impedance R0 See Table 1 Ω
Temperature Coefficient -0.3 ----- +0.3 % Oscillation Freq. drift,
-25 ~ +85°C
Aging* -0.3 ----- +0.3 % 10 years, from initial value
Withstanding Voltage ----- ----- 50 Vdc 1 minute
Insulation Resistance Ri 100 ----- ----- MΩ 10V, 1 minute
Operating Temperature Range -25 ----- +85 °C
Storage Temperature Range -40 ----- +85 °C
Rating Voltage UR ----- ----- 6 Vdc
----- ----- 15 Vp-p
• Standard frequency range from 400kHz to 1000kHz
• Suitable for RoHS compliant reflow process
• Low cost timing solution
• Microprocessor clocks
• Electrical appliances
• Remote controls
SMD LOW FREQUENCY kHz
BAND CERAMIC RESONATORS
Parts shall be measured under a condition (Temp.：20°C±15°C, Humidity ：65%±20% R.H.) unless the standard condition
(Temp.：25°C ±3°C, Humidity ：65%±5% R.H.) is regulated to measure.
IC：1/6TC4069UBP×2
X：CERAMIC RESONATOR
C1, C2：120pF, 470pF (for 400kHz)
C1, C2：100pF (for 455kHz, 500kHz,
600kHz, 800kHz, 1000kHz)
• Low resonant impedance
• SMD type package with
formed leads
||||||||||| | | | |
LXZTS series
Size varies
RoHS
Compliant
30332
Esperanza, Rancho Santa Margarita, California
92688
tel 949-546-8000 | fax 949-546-8001| www.abracon.com
Revised: 12.29.10
Visit
www.abracon.com
for Terms & Conditions of Sale
OPTIONS & PART IDENTIFICATION:
Pb in ceramic
(exempt per RoHS 2002/95/EC Annex (7))
CERTIFIED
ABRACON IS
CERTIFIED
ABRACON IS
ISO9001:2008
CERTIFIED
SMD LOW FREQUENCY kHz
BAND CERAMIC RESONATORS
LXZTS - kHz -
Frequency in MHz
Please specify the frequency in kHz.
e.g. 455kHz, 600kHz
Packaging
Blank: Bulk
T: Tape and reel
Fosc (kHz) A B C D E F G H I J
400 8.0±0.5 9.0±0.5 3.5±0.5 2.0±0.5 5.0±0.5 1.1±0.1 0.9±0.1 0+0.1/-
0.4 1.0±0.3 0.15±0.05
455 7.5±0.3 8.5±0.3 3.3±0.3 2.5±0.5 5.0±0.5 1.1±0.1 0.9±0.1 0+0.1/-
0.4 1.0±0.5 0.15±0.02
500 7.5±0.5 8.5±0.5 3.3±0.5 2.0±0.5 5.0±0.5 1.0±0.1 --- 0+0.1/-
0.4 1.0±0.3 0.15±0.05
600 7.0±0.3 8.5±0.3 3.0±0.3 2.5±0.5 5.0±0.5 1.1±0.1 0.9±0.1 0+0.1/-
0.4 1.0±0.5 0.15±0.02
800 5.0±0.3 6.0±0.3 2.2±0.3 2.0±0.5 2.5±0.5 0.8±0.2 --- 0+0.1/-
0.4 1.0±0.5 0.12±0.02
1000 5.0±0.5 6.0±0.5 2.2±0.5 2.0±0.5 2.5±0.5 0.8±0.2 0.7±0.2 0+0.1/-
0.4 1.0±0.3 0.12±0.05
Dimensions: mm
OUTLINE DIMENSIONS:
||||||||||| | | | |
LXZTS series
Size varies
RoHS
Compliant
30332
Esperanza, Rancho Santa Margarita, California
92688
tel 949-546-8000 | fax 949-546-8001| www.abracon.com
Revised: 12.29.10
Visit
www.abracon.com
for Terms & Conditions of Sale
TAPE AND REEL:
Pb in ceramic
(exempt per RoHS 2002/95/EC Annex (7))
CERTIFIED
ABRACON IS
CERTIFIED
ABRACON IS
ISO9001:2008
CERTIFIED
SMD LOW FREQUENCY kHz
BAND CERAMIC RESONATORS
REFLOW PROFILE:
Blank Pocket
10 Pitches
Loaded Pocket Blank Pocket
10 Pitches
Leader
200mm Max
Peeling Strength
20-70g
Carrier Tape
Top Tape
10 max
φA φB W T Carrier tape size
330±3 80min 24.5min 30.4max 24
Dimensions: mm
T: 1000pcs/ reel for 400kHz, 455kHz,
500kHz, 600kHz
T: 2500pcs/ reel for 800kHz, 1000kHz
ATTENTION: Abracon Corporation’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated,
Automotive Applications. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application
requiring high reliability where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme
operating environment, written consent and authorization from Abracon Corporation is required. Please contact Abracon Corporation for more information.
