OVM7695 VGA product brief lead free available in a lead-free package Industry's Most Compact VGA CameraCubeChipTM for Front-Facing Cameras in Mobile Devices The OVM7695 is an ultra compact VGA CameraCubeChipTM designed specifically to meet the performance and manufacturing requirements of front-facing camera applications for next-generation mobile devices. The only VGA camera using backside illumination (BSI) pixel technology, the reflowable OVM7695 is a highperformance, all-in-one complete camera solution with a module size of 2.4 x 2.4 x 2.3 mm. The OVM7695 offers an easy-to-use front-facing camera solution that requires minimal assembly and tuning effort. This dramatically simplifies design, integration and manufacturing of mobile phone cameras, thus reducing inventory risk and lowering development costs. The 1/13-inch OVM7695 is built on an optimized 1.75-micron OmniBSI+TM pixel, offering improved sensitivity and image reproduction to deliver optimal performance in difficult lighting conditions. The OVM7695 captures high-quality VGA video at 30 frames per second and provides full-frame, sub-sampled and cropped images in various formats through the Serial Camera Control Bus (SCCB) interface. It supports all required image processing functions, including exposure control, gamma, white balance, color saturation and noise and defective pixel canceling. It uses OmniVision's proprietary sensor technology to improve image quality by reducing or eliminating common lighting and electrical sources of image contamination to produce a clean, fully stable color image. Find out more at www.ovt.com. OVM7695 Applications Cellular and Picture Phones Ordering Information Product Features support image sizes: VGA (640x480), QVGA (320x240), QQVGA (160x120), and HF (640x20) automatic image control functions: - automatic exposure control (AEC), - automatic white balance (AWB) - automatic black level calibration (ABLC) support output formats: YUV422 and RAW 8 RGB through MIPI, YUV422 and RAW 10 RGB through OmniVision's proprietary SPI image quality controls: defect pixel correction and lens shading correction on-chip phase lock loop (PLL) built-in 1.5V regulator for digital block capable of maintaining register values at software power down OVM7695-RAEA (color, lead free, CameraCubeChipTM with black coating) OVM7695-RYEA (color, lead free, CameraCubeChipTM with metal can) support black sun cancellation Product Specifications standard serial SCCB interface active array size: 656 x 496 I/O tri-state configurability and programmable polarity power supply: maximum image transfer rate: - core: 1.5 VDC 5% (internal regulator) - VGA (640x480): 30 fps - analog: 2.8V 5% - QVGA (320x240): 60 fps - I/O: 2.8V, 1.8V - QQVGA (160x120): 120 fps - HF (640x20): 120 fps power requirements: - IDD-A: 15 mA sensitivity: 1200 mV/lux-sec - IDD-IO: 20 mA - XSHUTDOWN: 5 A shutter: rolling shutter programmable controls for frame rate, mirror and flip, AEC/AGC, and windowing support horizontal and vertical sub-sampling scan mode: progressive temperature range: - operating: -30C to 70C junction temperature - stable image: 0C to 50C junction temperature max S/N ratio: 35.9 dB output formats: YUV422, RAW RGB pixel size: 1.75 m x 1.75 m diagonal field of view (FOV): 61 dark current: 10 e-/s @ 50C junction temperature f no.: 2.7 dynamic range: 66.7 dB @ 16x gain maximum exposure interval: 536 x tROW image area: 1148 m x 868 m focal length: 1.21 mm input clock frequency: 6 ~ 27 MHz package dimensions (including ball height): - RAEA: 2420 x 2350 x 2325 m - RYEA: 3000 x 2450 x 2370 m Functional Block Diagram OVM7695 MIPI/SPI image output interface FIFO digital gain 10-bit A/D AMP black level calibration row select lens image array DSP image sensor processor formatter image sensor core column sample/hold gain control control register bank 4275 Burton Drive Santa Clara, CA 95054 USA Version 1.2, August, 2014 Tel: + 1 408 567 3000 Fax: + 1 408 567 3001 www.ovt.com SDA SCCB slave interface SCL FSIN timing generator and system control logic XSHUTDOWN XVCLK PLL OmniVision reserves the right to make changes to their products or to discontinue any product or service without further notice. OmniVision and the OmniVision logo are registered trademarks of OmniVision Technologies, Inc. CameraChip, OmniBSI-2, OmniBSI+ and CameraCubeChip are trademarks of OmniVision Technologies, Inc. All other trademarks are the property of their respective owners. MIPI/SPI