050 x .100 Tripolarized, Latch/Ejector Header Straight, 4 Wall, Surface Mount 810 Series IMPORTANT NOTICE TO PURCHASER ALL STATEMENTS, TECHNICAL INFORMATION AND RECOMMENDATIONS CONTAINED HEREIN ARE BASED ON TESTS WE BELIEVE TO BE RELIABLE, BUT THE ACCURACY OR COMPLETENESS THEREOF IS NOT GUARANTEED, AND THE FOLLOWING IS MADE IN LIEU OF ALL WARRANTIES, EXPRESSED OR IM- PLIED: SELLERS AND MANUFACTURERS ONLY OBLIGATION SHALL BE TO REPLACE SUCH QUANTITY OF THE PRODUCT PROVED TO BE DEFECTIVE. NEITHER SELLER NOR MANUFACTURER SHALL BE LIABLE FOR ANY INJURY, LOSS OR DAMAGE, DIRECT OR CONSEQUENTIAL, ARISING OUT OF THE USE OF OR THE INABILITY TO USE THE PRODUCT. BEFORE USING, USER SHALL DETERMINE THE SUITABILITY OF THE PRODUCT FOR HIS INTENDED USE, AND USER AS- SUMES ALL RISK AND LIABILITY WHATSOEVER IN CONNECTION THEREWITH. NO STATEMENT OR RECOMMENDATION NOT CONTAINED HEREIN SHALL HAVE ANY FORCE OR EFFECT UNLESS IN AN AGREEMENT SIGNED BY OF- FICERS OR SELLER AND MANUFACTURER. TS-0583-04 Date Issued: January 26, 1999 Sheet 1 of 3 56 Physical Insulation Material: High Temperature Plastic (LCP) Flammability: UL 94V-0 Color: Ivory (Natural) Marking: 3M Logo, Part Number Identification and Orientation Triangle Contact Material: Copper Alloy Plating Underplate: 100 w [ 2.54 um ] Nickel QQ-N-290, Class 2 Wiping Area: 30 [ 0.76 um ] Gold MIL-G-45204, Type II, Grade C Solder Tails: 200 [ 5.08 um ] 60/40 Tin Lead Electrical Current Rating: 0.5 A Insulation Resistance: > 1 x 10? Q at 500 Vdc Withstanding Voltage: 500 Vrms at Sea Level Environmental Temperature Rating: 55C to +105C Process Rating: 250C @ 90 seconds Max UL File No.: E68080 3M Electronic Products Division 6801 River Place Blvd. For technical, sales or ordering information call Austin, TX 78726-9000 800-225-5373 050 x .100 Tripolarized, Latch/Ejector Header Straight, 4 Wall, Surface Mount 810 Series AL Table 1 AL Contact Dimensions Quantity A B Cc D Ref 020 1.060 .710 .860 1,92 [26.92] ]| [18.03] | [21.84] | [48.3] 026 1.210 860 1.010 2.07 [30.73] | [21.84] | [25.65] | [52.6] B 036 1.460 1.110 1.280 2.32 2X oe [37.08] | [28.19] | [32.00] | [58.9] Position 2 (See Note 3) O40 1560 | 1210 | 1360 | 2.42 [ 3 a See Note 4 [39.62] | [30.73] | [34.54] | [61.5] , 050 1.810 1.480 1.610 2.67 . = : [45.97] | [37.08] | [40.89] | [67.8] { Rap Laas eee ee spas eceseeeceeeeesess ie 060 2.060 1.710 1.860 2.92 z goseanccnc@heaasenseaaca09 5888 oe [52.32] | [43.43] | [47.24] | [74.2] " 068 2.260 1,910 2.060 3.12 Position 4 [57.04] | [48.51] | [52.32] | [79.2] 015 X ..015 #|}. [0.38] X [0.38] _ 060 T 080 2.560 2.210 2.360 3.42 L400 Ret ~ i127] yP [65.02] | [56.13] | [59.94] | [86.9] (254) 100 3,060 | 2710 | 2.860 | 3.92 [77.72] ]| [68.83] | [72.64] | [99.6] D = bong Latches H+ Short Latch D-.25 [6.3] = Short Latches Position 1 Long Latch Orientation Triangle 165+ .010 oN [4.19] aia) pe .140+.010 . .828 Ref [3.56] 03] Uy Optional Single Press Fit Post Mount/Alignment 203) 346 + 010 Feature . [8.79] Inch @.116 Optional Metal [mm] Clip Retention 2.95] p Tolerance Unless Noted Notes: 0 .00 | .000 1. This polarization bump does not exist on the 20 position header. Inch | .1 | 4.01 | 4.005 2. Recommended to be mated to the .050 X .100 82XXX Series Wiremount Socket. 3. Accepts the following mounting hole hardware: #2-58 Machine Screw and Nut (3M Part #3341-6 [ ] Dimensions for Reference only Ordering Information Header Ejector / Latch 81XXX-6X0COX 3505-28 | | Ejector (Long) [- Contact Quantity Ejector/Latch System: Board Mounting Options: 3505-29 (See Table 1) 0 = None 0 = Screw Mount 1 = Short (Packaged Separately) 1 = None i 2 = Long (Packaged Separately) 4 = Press Fit Post Mount at Ejector/latch (Short) 5 = Short (Installed) Position 1 end 6 = Long (Installed) 5 = Mounting Screw holes and metal retention clips 7 = Metal retention clips TS-0583-04 Sheet 2 of 3 3M Electronic Products Division 6801 River Place Blvd. Austin, TX 78726-9000 For technical, sales or ordering information call 800-225-5373 050 x .100 Tripolarized, Latch/Ejector Header Straight, 4 Wall, Surface Mount 810 Series @.065 + .002 Typ Table 3 [1.65] UC UC Dimensions Ejector Latches 7 7 E Min H Min No 215 [5.46] .775 [19.69] Oo .003 Typ (Plated thru hole) Short 525 [13.34] 1.085 [27.56] , Long .650 [16.51] 1.21 [30.73] Table 2 Typ, Full R Dimensions No. of Positions r G Detail A Optional plated thru hole 20 450 [11.43] N/A fi I cli i or metal clip retention % "600 [15.24] N/A 36 850 [21.59] N/A 40 950 [24.13] N/A 50 1,200 [30.48] 025 [6.35] 60 1.450 [36.83] 0.000 68 1.850 [41.91] 0.000 80 1,950 [49.53] 0.000 | 100 2.450 [62.23] 0.000 | c | Optional Drilled Hole | for Plastic Post | & @.109 + .002 =, .050 + .002 Typ [2.77] [1.27] . on 08) + .002 | Tolerance Noncumulative See Detail A | .029 + .001 158 + .002 [0.74] a | La 205 + .003 ' ' 5.21 [3.96] Position 2 ' : ' | B21 | p57 | ee ae 1 Hil = OUI ICUOLEDUCCOOCD foci Te hoo | | 220+ .003 % ue yo mA CT, 376 [5.59] Te AEC OT Cr - > Pim pt 855 : : | : f Oo : HE). . | tLe pdiononcaL UNHQ AT Sy | 110+ .002 re Ey Position 1 ] [2.79] | 280 [7.11] Screw Mounting Holes 2X @.109 + .002 [2.77] CG + .002 Recommended Mounting Hole Pattern (Shown for mounting side of PC Board) TS-0583-04 Sheet 3 of 3 3M Electronic Products Division 6801 River Place Blvd. Austin, TX 78726-9000 For technical, sales or ordering information call 800-225-5373