VDE TURQUOISE SWITCHES ABS TYPE HIGH ENVIRONMENTAL RESISTANCE FEATURES 19.3 * Subminiature size (19.8x11.1x6.4 mm) * Sealed construction for use in adverse environment-Sealed construction by epoxy resin and rubber cap greatly reduces possible miscontact due to contaminants such as dust. Conforming to IP67* of IEC protective construction classification * Elastomer double molding technology, an industry first and ultrasonic swaging technology contribute to uniform sealing in high production quantities * Expansion of low-level circuit type * We offer a Au clad 2-ply contact type (for small loads) that we developed specifically for small current and voltage loads in the range of 1 mA to 100 mA and 5 V to 30 V. * UL/CSA/VDE/SEMKO approved (AS for Au-clad twin layer, VDE and SEMKO are not approved.) * Based on the protective construction classification of IEC, items which satisfy the test requirements are denoted with an IP designation. 6.4 11.1 TYPICAL APPLICATIONS * Automotive * Home appliances (vacuum cleaner, air purifier) * Others (gas cooking range) ORDERING INFORMATION Ex. ABS Type of switch Wire and terminal position 1 Terminal ABS: 1: Straight type 1: .110 quick-connect Turquoise 4: Right angle terminal switch 5: Left angle 4: Solder terminal S type 5: PC board terminal 6: Wire leads Remarks: 1. 2. 3. 4. 1 1 0 4 0 Operating force by Contact* Agency standard pin plunger (max.) 1: SPDT 0: Pin plunger 4: 0.98 N 0: AgNi alloy 3: UL/CSA/SEMKO 2: SPST-NC 1: Short hinge lever 5: 1.47 N 1: Au-clad (AgNi alloy contact, 3: SPST-NO 2: Hinge lever triple layer Au-clad triple layer type) 3: Long hinge lever 4: Au-clad 8: VDE/SEMKO 4: Simulated roller double layer (AgNi alloy contact, lever Au-clad triple layer type) 6: Roller lever 9: UL/CSA 8: Leaf lever (Au-clad double layer type) Contact arrangement Actuator Standard packing: Dust protected type 100 pcs./carton, 1,000 pcs./case; Immersion protected type 50 pcs./case. SPST-NC and SPST-NO are only available for wire leads type. Leaf lever is only available for wire leads type As for wire position: Straight type Wire opposite to the actuator side type (Right angle) Wire actuator side type (Left angle) 5. Not every combination is available. Please refer to the following table, "PRODUCT TYPES". * Contact 0: AgNi alloy 1: Au-clad triple layer AgNi alloy Au-clad CuNi alloy AgNi alloy 4: Au-clad double layer Au-clad CuNi alloy All Rights Reserved (c) COPYRIGHT Matsushita Electric Works, Ltd. ABS1,4,5 PRODUCT TYPES 1. Dust protected type AgNi alloy Actuator Pin plunger Short hinge lever Hinge lever Long hinge lever Simulated roller lever Roller lever Operating force Max. .110 quick-connect terminal Solder terminal 0.98 N 1.47 N 0.39 N 0.59 N 0.34 N 0.54 N 0.25 N 0.44 N 0.34 N 0.54 N 0.39 N 0.59 N ABS111040* ABS111050* ABS111140* ABS111150* ABS111240* ABS111250* ABS111340* ABS111350* ABS111440* ABS111450* ABS111640* ABS111650* ABS141040* ABS141050* ABS141140* ABS141150* ABS141240* ABS141250* ABS141340* ABS141350* ABS141440* ABS141450* ABS141640* ABS141650* Operating force Max. .110 quick-connect terminal Solder terminal 0.98 N 1.47 N 0.39 N 0.59 N 0.34 N 0.54 N 0.25 N 0.44 N 0.34 N 0.54 N 0.39 N 0.59 N ABS111041* ABS111051* ABS111141* ABS111151* ABS111241* ABS111251* ABS111341* ABS111351* ABS111441* ABS111451* ABS111641* ABS111651* ABS141041* ABS141051* ABS141141* ABS141151* ABS141241* ABS141251* ABS141341* ABS141351* ABS141441* ABS141451* ABS141641* ABS141651* Operating force Max. .110 quick-connect terminal Solder terminal 0.98 N 1.47 N 0.39 N 0.59 N 0.34 N 0.54 N 0.25 N 0.44 N 0.34 N 0.54 N 0.39 N 0.59 N ABS111044* ABS111054* ABS111144* ABS111154* ABS111244* ABS111254* ABS111344* ABS111354* ABS111444* ABS111454* ABS111644* ABS111654* ABS141044* ABS141054* ABS141144* ABS141154* ABS141244* ABS141254* ABS141344* ABS141354* ABS141444* ABS141454* ABS141644* ABS141654* Straight ABS151040* ABS151050* ABS151140* ABS151150* ABS151240* ABS151250* ABS151340* ABS151350* ABS151440* ABS151450* ABS151640* ABS151650* PC board terminal Terminal position Right angle ABS451040* ABS451050* ABS451140* ABS451150* ABS451240* ABS451250* ABS451340* ABS451350* ABS451440* ABS451450* ABS451640* ABS451650* Left angle ABS551040* ABS551050* ABS551140* ABS551150* ABS551240* ABS551250* ABS551340* ABS551350* ABS551440* ABS551450* ABS551640* ABS551650* Straight ABS151041* ABS151051* ABS151141* ABS151151* ABS151241* ABS151251* ABS151341* ABS151351* ABS151441* ABS151451* ABS151641* ABS151651* PC board terminal Terminal position Right angle ABS451041* ABS451051* ABS451141* ABS451151* ABS451241* ABS451251* ABS451341* ABS451351* ABS451441* ABS451451* ABS451641* ABS451651* Left angle ABS551041* ABS551051* ABS551141* ABS551151* ABS551241* ABS551251* ABS551341* ABS551351* ABS551441* ABS551451* ABS551641* ABS551651* Straight ABS151044* ABS151054* ABS151144* ABS151154* ABS151244* ABS151254* ABS151344* ABS151354* ABS151444* ABS151454* ABS151644* ABS151654* PC board terminal Terminal position Right angle ABS451044* ABS451054* ABS451144* ABS451154* ABS451244* ABS451254* ABS451344* ABS451354* ABS451444* ABS451454* ABS451644* ABS451654* Left angle ABS551044* ABS551054* ABS551144* ABS551154* ABS551244* ABS551254* ABS551344* ABS551354* ABS551444* ABS551454* ABS551644* ABS551654* Au-clad triple layer Actuator Pin plunger Short hinge lever Hinge lever Long hinge lever Simulated roller lever Roller lever Au-clad double layer Actuator Pin plunger Short hinge lever Hinge lever Long hinge lever Simulated roller lever Roller lever * Agency standard: Please refer to "Ordering information". All Rights Reserved (c) COPYRIGHT Matsushita Electric Works, Ltd. ABS1,4,5 2. Immersion protected type (3 wire leads type SPDT) AgNi alloy Actuator Pin plunger Short hinge lever Hinge lever Long hinge lever Simulated roller lever Roller lever Straight ABS161040* ABS161050* ABS161140* ABS161150* ABS161240* ABS161250* ABS161340* ABS161350* ABS161440* ABS161450* ABS161640* ABS161650* SPDT Wire position Right angle ABS461040* ABS461050* ABS461140* ABS461150* ABS461240* ABS461250* ABS461340* ABS461350* ABS461440* ABS461450* ABS461640* ABS461650* Left angle ABS561040* ABS561050* ABS561140* ABS561150* ABS561240* ABS561250* ABS561340* ABS561350* ABS561440* ABS561450* ABS561640* ABS561650* Straight ABS161041* ABS161051* ABS161141* ABS161151* ABS161241* ABS161251* ABS161341* ABS161351* ABS161441* ABS161451* ABS161641* ABS161651* SPDT Wire position Right angle ABS461041* ABS461051* ABS461141* ABS461151* ABS461241* ABS461251* ABS461341* ABS461351* ABS461441* ABS461451* ABS461641* ABS461651* Left angle ABS561041* ABS561051* ABS561141* ABS561151* ABS561241* ABS561251* ABS561341* ABS561351* ABS561441* ABS561451* ABS561641* ABS561651* SPDT Wire position Right angle ABS461044* ABS461054* ABS461144* ABS461154* ABS461244* ABS461254* ABS461344* ABS461354* ABS461444* ABS461454* ABS461644* ABS461654* ABS561044* ABS561054* ABS561144* ABS561154* ABS561244* ABS561254* ABS561344* ABS561354* ABS561444* ABS561454* ABS561644* ABS561654* Operating force Max. 0.98 N 1.47 N 0.39 N 0.59 N 0.34 N 0.54 N 0.25 N 0.44 N 0.34 N 0.54 N 0.39 N 0.59 N Au-clad triple layer Actuator Pin plunger Short hinge lever Hinge lever Long hinge lever Simulated roller lever Roller lever Operating force Max. 0.98 N 1.47 N 0.39 N 0.59 N 0.34 N 0.54 N 0.25 N 0.44 N 0.34 N 0.54 N 0.39 N 0.59 N Au-clad double layer Actuator Operating force Max. Straight Pin plunger Short hinge lever Hinge lever Long hinge lever Simulated roller lever Roller lever 0.98 N 1.47 N 0.39 N 0.59 N 0.34 N 0.54 N 0.25 N 0.44 N 0.34 N 0.54 N 0.39 N 0.59 N ABS161044* ABS161054* ABS161144* ABS161154* ABS161244* ABS161254* ABS161344* ABS161354* ABS161444* ABS161454* ABS161644* ABS161654* * Agency standard: Please refer to "Ordering information". All Rights Reserved (c) COPYRIGHT Matsushita Electric Works, Ltd. Left angle ABS1,4,5 3. Immersion protected type (2 wire leads type SPST-NC) AgNi alloy Actuator Pin plunger Short hinge lever Hinge lever Long hinge lever Simulated roller lever Roller lever Straight ABS162040* ABS162050* ABS162140* ABS162150* ABS162240* ABS162250* ABS162340* ABS162350* ABS162440* ABS162450* ABS162640* ABS162650* SPST-NC Wire position Right angle ABS462040* ABS462050* ABS462140* ABS462150* ABS462240* ABS462250* ABS462340* ABS462350* ABS462440* ABS462450* ABS462640* ABS462650* Left angle ABS562040* ABS562050* ABS562140* ABS562150* ABS562240* ABS562250* ABS562340* ABS562350* ABS562440* ABS562450* ABS562640* ABS562650* Straight ABS162041* ABS162051* ABS162141* ABS162151* ABS162241* ABS162251* ABS162341* ABS162351* ABS162441* ABS162451* ABS162641* ABS162651* SPST-NC Wire position Right angle ABS462041* ABS462051* ABS462141* ABS462151* ABS462241* ABS462251* ABS462341* ABS462351* ABS462441* ABS462451* ABS462641* ABS462651* Left angle ABS562041* ABS562051* ABS562141* ABS562151* ABS562241* ABS562251* ABS562341* ABS562351* ABS562441* ABS562451* ABS562641* ABS562651* SPST-NC Wire position Right angle ABS462044* ABS462054* ABS462144* ABS462154* ABS462244* ABS462254* ABS462344* ABS462354* ABS462444* ABS462454* ABS462644* ABS462654* ABS562044* ABS562054* ABS562144* ABS562154* ABS562244* ABS562254* ABS562344* ABS562354* ABS562444* ABS562454* ABS562644* ABS562654* Operating force Max. 0.98 N 1.47 N 0.39 N 0.59 N 0.34 N 0.54 N 0.25 N 0.44 N 0.34 N 0.54 N 0.39 N 0.59 N Au-clad triple layer Actuator Pin plunger Short hinge lever Hinge lever Long hinge lever Simulated roller lever Roller lever Operating force Max. 0.98 N 1.47 N 0.39 N 0.59 N 0.34 N 0.54 N 0.25 N 0.44 N 0.34 N 0.54 N 0.39 N 0.59 N Au-clad double layer Actuator Operating force Max. Straight Pin plunger Short hinge lever Hinge lever Long hinge lever Simulated roller lever Roller lever 0.98 N 1.47 N 0.39 N 0.59 N 0.34 N 0.54 N 0.25 N 0.44 N 0.34 N 0.54 N 0.39 N 0.59 N ABS162044* ABS162054* ABS162144* ABS162154* ABS162244* ABS162254* ABS162344* ABS162354* ABS162444* ABS162454* ABS162644* ABS162654* * Agency standard: Please refer to "Ordering information". All Rights Reserved (c) COPYRIGHT Matsushita Electric Works, Ltd. Left angle ABS1,4,5 4. Immersion protected type (2 wire leads type SPST-NO) AgNi alloy Actuator Pin plunger Short hinge lever Hinge lever Long hinge lever Simulated roller lever Roller lever Straight ABS163040* ABS163050* ABS163140* ABS163150* ABS163240* ABS163250* ABS163340* ABS163350* ABS163440* ABS163450* ABS163640* ABS163650* SPST-NO Wire position Right angle ABS463040* ABS463050* ABS463140* ABS463150* ABS463240* ABS463250* ABS463340* ABS463350* ABS463440* ABS463450* ABS463640* ABS463650* Left angle ABS563040* ABS563050* ABS563140* ABS563150* ABS563240* ABS563250* ABS563340* ABS563350* ABS563440* ABS563450* ABS563640* ABS563650* Straight ABS163041* ABS163051* ABS163141* ABS163151* ABS163241* ABS163251* ABS163341* ABS163351* ABS163441* ABS163451* ABS163641* ABS163651* SPST-NO Wire position Right angle ABS463041* ABS463051* ABS463141* ABS463151* ABS463241* ABS463251* ABS463341* ABS463351* ABS463441* ABS463451* ABS463641* ABS463651* Left angle ABS563041* ABS563051* ABS563141* ABS563151* ABS563241* ABS563251* ABS563341* ABS563351* ABS563441* ABS563451* ABS563641* ABS563651* SPST-NO Wire position Right angle ABS463044* ABS463054* ABS463144* ABS463154* ABS463244* ABS463254* ABS463344* ABS463354* ABS463444* ABS463454* ABS463644* ABS463654* ABS563044* ABS563054* ABS563144* ABS563154* ABS563244* ABS563254* ABS563344* ABS563354* ABS563444* ABS563454* ABS563644* ABS563654* Operating force Max. 0.98 N 1.47 N 0.39 N 0.59 N 0.34 N 0.54 N 0.25 N 0.44 N 0.34 N 0.54 N 0.39 N 0.59 N Au-clad triple layer Actuator Pin plunger Short hinge lever Hinge lever Long hinge lever Simulated roller lever Roller lever Operating force Max. 0.98 N 1.47 N 0.39 N 0.59 N 0.34 N 0.54 N 0.25 N 0.44 N 0.34 N 0.54 N 0.39 N 0.59 N Au-clad double layer Actuator Operating force Max. Straight Pin plunger Short hinge lever Hinge lever Long hinge lever Simulated roller lever Roller lever 0.98 N 1.47 N 0.39 N 0.59 N 0.34 N 0.54 N 0.25 N 0.44 N 0.34 N 0.54 N 0.39 N 0.59 N ABS163044* ABS163054* ABS163144* ABS163154* ABS163244* ABS163254* ABS163344* ABS163354* ABS163444* ABS163454* ABS163644* ABS163654* * Agency standard: Please refer to "Ordering information". All Rights Reserved (c) COPYRIGHT Matsushita Electric Works, Ltd. Left angle ABS1,4,5 5. Immersion protected type (3 wire leads type SPDT) * Leaf lever type AgNi alloy Actuator 0.88 N 1.08 N Leaf lever Straight ABS161840* ABS161850* SPDT Wire position Right angle ABS461840* ABS461850* Left angle ABS561840* ABS561850* Straight ABS161841* ABS161851* SPDT Wire position Right angle ABS461841* ABS461851* Left angle ABS561841* ABS561851* Straight ABS161844* ABS161854* SPDT Wire position Right angle ABS461844* ABS461854* Left angle ABS561844* ABS561854* Straight ABS162840* ABS162850* SPST-NC Wire position Right angle ABS462840* ABS462850* Left angle ABS562840* ABS562850* Straight ABS162841* ABS162851* SPST-NC Wire position Right angle ABS462841* ABS462851* Left angle ABS562841* ABS562851* Straight ABS162844* ABS162854* SPST-NC Wire position Right angle ABS462844* ABS462854* Left angle ABS562844* ABS562854* Straight ABS163840* ABS163850* SPST-NO Wire position Right angle ABS463840* ABS463850* Left angle ABS563840* ABS563850* Straight ABS163841* ABS163851* SPST-NO Wire position Right angle ABS463841* ABS463851* Left angle ABS563841* ABS563851* Operating force Max. Au-clad triple layer Actuator Operating force Max. 0.88 N 1.08 N Leaf lever Au-clad double layer Actuator Operating force Max. 0.88 N 1.08 N Leaf lever 6. Immersion protected type (2 wire leads type SPST-NC) * Leaf lever type AgNi alloy Actuator Operating force Max. 0.88 N 1.08 N Leaf lever Au-clad triple layer Actuator Operating force Max. 0.88 N 1.08 N Leaf lever Au-clad double layer Actuator Operating force Max. 0.88 N 1.08 N Leaf lever 7. Immersion protected type (2 wire leads type SPST-NO) * Leaf lever type AgNi alloy Actuator Operating force Max. 0.88 N 1.08 N Leaf lever Au-clad triple layer Actuator Leaf lever Operating force Max. 0.88 N 1.08 N * Agency standard: Please refer to "Ordering information". All Rights Reserved (c) COPYRIGHT Matsushita Electric Works, Ltd. ABS1,4,5 Au-clad double layer SPST-NO Wire position Right angle ABS463844* ABS463854* Operating force Max. gf Actuator Straight ABS163844* ABS163854* 0.89 N 1.08 N Leaf lever Left angle ABS563844* ABS563854* * Agency standard: Please refer to "Ordering information". SPECIFICATIONS 1. Contact rating AgNi alloy contact type Voltage 125 V AC 250 V AC 30 V DC 125 V DC Resistive load 2A 2A 2A 0.4 A Inductive load 2A 2A 2A 0.05 A Au-clad contact type Au-clad Au-clad triple layer twin layer Resistive load 0.1 A -- 0.1 A -- 0.1 A 0.1 A -- -- Low-level circuit rating (Au-clad contact type) Rated voltage 6 V DC 12 V DC 24 V DC Resistive load 5 mA 2 mA 1 mA Recommended contact material chart classified by load voltage & current (reference) 2A Silver-alloy 100mA Gold-clad triple layer Gold-clad double layer 1mA 0 DC AC 5 5 15 30V 30 250V Remarks: If the contact is being used in the constant low-level circuit load range, the Au-clad twin layer contact is recommended. If there is a danger of the current being less than 0.5 A, for instance if the contact is being turned on and off, the Au-clad triple layer type is recommended. 2. Characteristics Mechanical life (O.T.: Specified value) Electrical life at rated load (O.T.: Max.) Leaf lever Min. 5x105 (at 60 cpm) Min. 5x106 (at 60 cpm) Min. 5x104 (at 20 cpm) Min. 2x105 (at 20 cpm) Min. 100 M (at 500 V DC insulation resistance meter) Other types AgNi alloy contact type Au-clad contact type Insulation resistance Dielectric strength Between non-continuous terminals Between each terminal and other exposed metal parts Between each terminal and ground Vibration resistance (Pin plunger type) Shock resistance (Pin plunger type) AgNi alloy contact type Contact resistance (Initial) Au-clad contact type Allowable operating speed (at no load) Max. operating cycle rate (at no load) Ambient temperature Unit weight 1,000 Vrms 1,500 Vrms 1,500 Vrms 10 to 55 Hz at single amplitude of 0.75 mm (Contact opening Max. 1 msec.) Min. 294 m/s2 (Contact opening Max. 1 msec.) Dust protected type (IP50): Max. 50 m (By voltage drop 1 A 6 to 8 V DC) Immersion protected type (IP67): Max. 100 m Dust protected type (IP50): Max. 100 m (By voltage drop 0.1 A 6 to 8 V DC) Immersion protected type (IP67): Max. 150 m 0.1 to 500 mm/sec. 120 cpm -40C to +85C Approx. 2 g (IP50 type) 3. Operating characteristics Type of actuator Pin plunger Short hinge lever Hinge lever Long hinge lever Simulated roller lever Roller lever Leaf lever Operating force, Max. 0.98N 0.39N 0.34N 0.25N 0.34N 0.39N 0.88N 1.47N 0.59N 0.54N 0.44N 0.54N 0.59N 1.08N Release force, Min. 0.15N 0.034N 0.029N 0.025N 0.029N 0.034N 0.17N 0.20N 0.039N 0.034N 0.029N 0.034N 0.039N 0.20N Pretravel, Max. mm 0.6 2.5 2.8 3.5 2.8 2.5 4.5 Movement differential, Max. mm 0.1 0.5 0.8 1.0 0.8 0.5 1.0 All Rights Reserved (c) COPYRIGHT Matsushita Electric Works, Ltd. Overtravel, Min. mm 0.4 0.8 1.2 1.6 1.2 0.8 2.5 Operating position, mm 8.40.3 8.80.8 8.80.8 8.81.2 11.650.8 14.50.8 14.51.5 ABS1,4,5 mm General tolerance: 0.25 DIMENSIONS 1. Dust protected type 1-(1) .110 quick-connect terminal Pin plunger 1.7 dia. Pretravel 0.6 max. 7.60.3 Operating Position 8.40.3 7.7 6.7 +0.1 2.4-0.05 11.80.4 3.40.1 2.4 +0.1 11 2.4-0.05 dia. 5.50.1 7.10.15 2.50.1 C0.6 2.80.1 1.20.05 dia. 9.50.1 6.40.2 4 7.60.15 7.60.15 19.80.3 Pretravel, Max. mm Movement differential, Max. mm Overtravel, Min. mm Distance from mounting hole, mm Operating position Distance from stand-off, mm 0.6 0.1 0.4 8.40.3 11.80.4 Short hinge lever 12.85 50.4 Pretravel 2.5 max. R18 4 (3.7) Pretravel, Max. mm Movement differential, Max. mm Overtravel, Min. mm Distance from mounting hole, mm Operating position Distance from stand-off, mm Operating Position 8.80.8 6.3 12.20.9 2.5 0.5 0.8 8.80.8 12.20.9 Hinge lever 7.150.4 Pretravel 2.8 max. R20.2 4 (3.7) Pretravel, Max. mm Movement differential, Max. mm Overtravel, Min. mm Distance from mounting hole, mm Operating position Distance from stand-off, mm Operating Position 8.80.8 12.20.9 2.8 0.8 1.2 8.80.8 12.20.9 Long hinge lever 13.10.4 Pretravel 3.5 max. R26.1 Operating Position 8.81.2 12.21.3 4 (3.5) Pretravel, Max. mm Movement differential, Max. mm Overtravel, Min. mm Distance from mounting hole, mm Operating position Distance from stand-off, mm All Rights Reserved (c) COPYRIGHT Matsushita Electric Works, Ltd. 3.5 1 1.6 8.81.2 12.21.3 ABS1,4,5 mm General tolerance: 0.25 Simulated roller lever 6.30.4 4 (3.5) Pretravel 2.8 max. R19.9 R2.5 Pretravel, Max. mm Movement differential, Max. mm Overtravel, Min. mm Distance from mounting hole, mm Operating position Distance from stand-off, mm Operating Position 11.650.8 15.050.9 2.8 0.8 1.2 11.650.8 15.050.9 Roller lever 5.150.4 3.2 Pretravel 2.5 max. R18.9 5 dia. 17.90.9 Pretravel, Max. mm Movement differential, Max. mm Overtravel, Min. mm Distance from mounting hole, mm Operating position Distance from stand-off, mm Operating Position 14.50.8 2.5 0.5 0.8 14.50.8 17.90.9 1-(2) Solder terminal +0.1 2.4-0.05 2.4 1.10.12 3.40.15 7.4 +0.1 -0.05 2.4 2.4 dia. 1.50.12 1.850.2 2.50.1 1.9 9.50.1 0.5 2.80.2 1.250.1 8.70.15 5.2 6.40.2 15.40.15 19.80.3 Remarks: Dimensions of the actuator types are the same as those of corresponding .110 quick-connect terminal types. 1-(3) PC board terminal Straight type +0.1 2.4-0.05 1.20.05 dia. 2.4 1.10.12 3.40.15 8.70.1 15.40.1 7.4 +0.1 2.4-0.05 dia. 2.50.1 0.9 9.50.1 8.70.15 15.40.15 19.80.3 1.50.12 1.850.2 0.5 1.250.1 2.2 5.2 6.40.2 Remarks: Dimensions of the actuator types are the same as those of corresponding .110 quick-connect terminal types. All Rights Reserved (c) COPYRIGHT Matsushita Electric Works, Ltd. ABS1,4,5 mm General tolerance: 0.25 Right angle type 3-1.50.05 dia. 7.620.1 5.080.2 6.4 7.620.15 7.620.15 0.5 7.620.1 Remarks: Dimensions of the actuator types are the same as those of corresponding .110 quick-connect terminal types. Left angle type 3-1.50.05 dia. 7.620.1 5.080.2 1.3 6-C0.3 (2.8) 7.620.15 7.620.15 7.620.15 7.620.15 0.5 7.620.1 6.4 1.3 3.2 6.4 Remarks: Dimensions of the actuator types are the same as those of corresponding .110 quick-connect terminal types. 2. Immersion protected type Wire leads Pin plunger Straight type 6.4 21.2 Thickness of the lead wire: 0.5 mm2 UL/CSA approved type and Right/Left angle type: AWG #20 Color of the lead wire: COM ...Black N.C. ...Red N.O. ...White +0.1 2.4-0.05 dia. 9.2 COM NO Remarks: 1. Other dimensions are the same as those of .110 quick-connect terminal types. 2. Dimensions of the actuator types are the same as those of corresponding .110 quickconnect terminal types. NC 30010 52 Right angle type Left angle type 52 30010 52 30010 All Rights Reserved (c) COPYRIGHT Matsushita Electric Works, Ltd. ABS1,4,5 mm General tolerance: 0.25 Leaf lever Straight type 5 7.60.3 81 Pretravel 4.5 max. 1.5 Free Position (16.5) Operating Position 14.51.5 7.7 Totaltravel Position (10.5 min.) +0.1 8.4 2.50.1 Thickness of the lead wire: 0.5 mm2 UL/CSA approved type and Right/Left angle type: AWG #20 Color of the lead wire: COM ...Black N.C. ...Red N.O. ...White 8.4 2.4-0.05 dia. 6.4 30010 52 23.80.4 Right angle type Left angle type 5 5 6.4 6.4 52 30010 52 30010 All Rights Reserved (c) COPYRIGHT Matsushita Electric Works, Ltd.