ORDERING INFORMATION
HIGH ENVIRONMENTAL
RESISTANCE
TURQUOISE
SWITCHES
ABS TYPE
VDE
6.4
19.3
11.1
FEATURES
• Subminiature size (19.8×11.1×6.4 mm)
• Sealed construction for use in adverse environment-Sealed construction by
epoxy resin and rubber cap greatly reduces possible miscontact due to
contaminants such as dust. Conforming to IP67* of IEC protective construction
classification
• Elastomer double molding technology, an industry first and ultrasonic swaging
technology contribute to uniform sealing in high production quantities
• Expansion of low-level circuit type
•We offer a Au clad 2-ply contact type (for small loads) that we developed
specifically for small current and voltage loads in the range of 1 mA to 100 mA
and 5 V to 30 V.
• UL/CSA/VDE/SEMKO approved
(AS for Au-clad twin layer, VDE and SEMKO are not approved.)
*Based on the protective construction classification of IEC, items which satisfy the test
requirements are denoted with an IP designation.
TYPICAL APPLICATIONS
•Automotive
• Home appliances (vacuum cleaner, air purifier)
• Others (gas cooking range)
Type of
switch
ABS:
Turquoise
switch
S type
Wire and
terminal
position
1:
4:
5:
Straight type
Right angle
Left angle
Te r minal
1:
4:
5:
6:
.110 quick-connect
terminal
Solder terminal
PC board terminal
Wire leads
Contact
arrangement
1:
2:
3:
SPDT
SPST-NC
SPST-NO
Actuator
0:
1:
2:
3:
4:
6:
8:
Pin plunger
Short hinge lever
Hinge lever
Long hinge lever
Simulated roller
lever
Roller lever
Leaf lever
Operating
force by
pin plunger
(max.)
4:
5:
0.98 N
1.47 N
Contact*
0:
1:
4:
AgNi alloy
Au-clad
triple layer
Au-clad
double layer
Agency standard
3:
8:
9:
UL/CSA/SEMKO
(AgNi alloy contact,
Au-clad triple layer type)
VDE/SEMKO
(AgNi alloy contact,
Au-clad triple layer type)
UL/CSA
(Au-clad double layer type)
Ex. ABS 1 1 1 0 4 0
Remarks: 1. Standard packing: Dust protected type 100 pcs./carton, 1,000 pcs./case; Immersion protected type 50 pcs./case.
2. SPST-NC and SPST-NO are only available for wire leads type.
3. Leaf lever is only available for wire leads type
4. As for wire position:
5. Not every combination is available. Please refer to the following table, “PRODUCT TYPES”.
* Contact
Straight type Wire opposite to the
actuator side type
(Right angle)
Wire actuator side type
(Left angle)
AgNi alloy
0: AgNi alloy 1: Au-clad triple layer 4: Au-clad double layer
AgNi alloyAu-clad
CuNi alloy
Au-clad
CuNi alloy
All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.
ABS1,4,5
PRODUCT TYPES
1. Dust protected type
AgNi alloy
Au-clad triple layer
Au-clad double layer
* Agency standard: Please refer to “Ordering information”.
Actuator Operating force
Max.
.110
quick-connect
terminal
Solder terminal
PC board terminal
Te r minal position
Straight Right angle Left angle
Pin plunger 0.98 N ABS111040* ABS141040* ABS151040* ABS451040* ABS551040*
1.47 N ABS111050* ABS141050* ABS151050* ABS451050* ABS551050*
Short hinge lever 0.39 N ABS111140* ABS141140* ABS151140* ABS451140* ABS551140*
0.59 N ABS111150* ABS141150* ABS151150* ABS451150* ABS551150*
Hinge lever 0.34 N ABS111240* ABS141240* ABS151240* ABS451240* ABS551240*
0.54 N ABS111250* ABS141250* ABS151250* ABS451250* ABS551250*
Long hinge lever 0.25 N ABS111340* ABS141340* ABS151340* ABS451340* ABS551340*
0.44 N ABS111350* ABS141350* ABS151350* ABS451350* ABS551350*
Simulated roller lever 0.34 N ABS111440* ABS141440* ABS151440* ABS451440* ABS551440*
0.54 N ABS111450* ABS141450* ABS151450* ABS451450* ABS551450*
Roller lever 0.39 N ABS111640* ABS141640* ABS151640* ABS451640* ABS551640*
0.59 N ABS111650* ABS141650* ABS151650* ABS451650* ABS551650*
Actuator Operating force
Max.
.110
quick-connect
terminal
Solder terminal
PC board terminal
Te r minal position
Straight Right angle Left angle
Pin plunger 0.98 N ABS111041* ABS141041* ABS151041* ABS451041* ABS551041*
1.47 N ABS111051* ABS141051* ABS151051* ABS451051* ABS551051*
Short hinge lever 0.39 N ABS111141* ABS141141* ABS151141* ABS451141* ABS551141*
0.59 N ABS111151* ABS141151* ABS151151* ABS451151* ABS551151*
Hinge lever 0.34 N ABS111241* ABS141241* ABS151241* ABS451241* ABS551241*
0.54 N ABS111251* ABS141251* ABS151251* ABS451251* ABS551251*
Long hinge lever 0.25 N ABS111341* ABS141341* ABS151341* ABS451341* ABS551341*
0.44 N ABS111351* ABS141351* ABS151351* ABS451351* ABS551351*
Simulated roller lever 0.34 N ABS111441* ABS141441* ABS151441* ABS451441* ABS551441*
0.54 N ABS111451* ABS141451* ABS151451* ABS451451* ABS551451*
Roller lever 0.39 N ABS111641* ABS141641* ABS151641* ABS451641* ABS551641*
0.59 N ABS111651* ABS141651* ABS151651* ABS451651* ABS551651*
Actuator Operating force
Max.
.110
quick-connect
terminal
Solder terminal
PC board terminal
Te r minal position
Straight Right angle Left angle
Pin plunger 0.98 N ABS111044* ABS141044* ABS151044* ABS451044* ABS551044*
1.47 N ABS111054* ABS141054* ABS151054* ABS451054* ABS551054*
Short hinge lever 0.39 N ABS111144* ABS141144* ABS151144* ABS451144* ABS551144*
0.59 N ABS111154* ABS141154* ABS151154* ABS451154* ABS551154*
Hinge lever 0.34 N ABS111244* ABS141244* ABS151244* ABS451244* ABS551244*
0.54 N ABS111254* ABS141254* ABS151254* ABS451254* ABS551254*
Long hinge lever 0.25 N ABS111344* ABS141344* ABS151344* ABS451344* ABS551344*
0.44 N ABS111354* ABS141354* ABS151354* ABS451354* ABS551354*
Simulated roller lever 0.34 N ABS111444* ABS141444* ABS151444* ABS451444* ABS551444*
0.54 N ABS111454* ABS141454* ABS151454* ABS451454* ABS551454*
Roller lever 0.39 N ABS111644* ABS141644* ABS151644* ABS451644* ABS551644*
0.59 N ABS111654* ABS141654* ABS151654* ABS451654* ABS551654*
All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.
2. Immersion protected type (3 wire leads type SPDT)
AgNi alloy
Au-clad triple layer
Au-clad double layer
* Agency standard: Please refer to “Ordering information”.
Actuator Operating force
Max.
SPDT
Wire position
Straight Right angle Left angle
Pin plunger 0.98 N ABS161040* ABS461040* ABS561040*
1.47 N ABS161050* ABS461050* ABS561050*
Short hinge lever 0.39 N ABS161140* ABS461140* ABS561140*
0.59 N ABS161150* ABS461150* ABS561150*
Hinge lever 0.34 N ABS161240* ABS461240* ABS561240*
0.54 N ABS161250* ABS461250* ABS561250*
Long hinge lever 0.25 N ABS161340* ABS461340* ABS561340*
0.44 N ABS161350* ABS461350* ABS561350*
Simulated roller lever 0.34 N ABS161440* ABS461440* ABS561440*
0.54 N ABS161450* ABS461450* ABS561450*
Roller lever 0.39 N ABS161640* ABS461640* ABS561640*
0.59 N ABS161650* ABS461650* ABS561650*
Actuator Operating force
Max.
SPDT
Wire position
Straight Right angle Left angle
Pin plunger 0.98 N ABS161041* ABS461041* ABS561041*
1.47 N ABS161051* ABS461051* ABS561051*
Short hinge lever 0.39 N ABS161141* ABS461141* ABS561141*
0.59 N ABS161151* ABS461151* ABS561151*
Hinge lever 0.34 N ABS161241* ABS461241* ABS561241*
0.54 N ABS161251* ABS461251* ABS561251*
Long hinge lever 0.25 N ABS161341* ABS461341* ABS561341*
0.44 N ABS161351* ABS461351* ABS561351*
Simulated roller lever 0.34 N ABS161441* ABS461441* ABS561441*
0.54 N ABS161451* ABS461451* ABS561451*
Roller lever 0.39 N ABS161641* ABS461641* ABS561641*
0.59 N ABS161651* ABS461651* ABS561651*
Actuator Operating force
Max.
SPDT
Wire position
Straight Right angle Left angle
Pin plunger 0.98 N ABS161044* ABS461044* ABS561044*
1.47 N ABS161054* ABS461054* ABS561054*
Short hinge lever 0.39 N ABS161144* ABS461144* ABS561144*
0.59 N ABS161154* ABS461154* ABS561154*
Hinge lever 0.34 N ABS161244* ABS461244* ABS561244*
0.54 N ABS161254* ABS461254* ABS561254*
Long hinge lever 0.25 N ABS161344* ABS461344* ABS561344*
0.44 N ABS161354* ABS461354* ABS561354*
Simulated roller lever 0.34 N ABS161444* ABS461444* ABS561444*
0.54 N ABS161454* ABS461454* ABS561454*
Roller lever 0.39 N ABS161644* ABS461644* ABS561644*
0.59 N ABS161654* ABS461654* ABS561654*
ABS1,4,5
All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.
ABS1,4,5
3. Immersion protected type (2 wire leads type SPST-NC)
AgNi alloy
Au-clad triple layer
Au-clad double layer
* Agency standard: Please refer to “Ordering information”.
Actuator Operating force
Max.
SPST-NC
Wire position
Straight Right angle Left angle
Pin plunger 0.98 N ABS162040* ABS462040* ABS562040*
1.47 N ABS162050* ABS462050* ABS562050*
Short hinge lever 0.39 N ABS162140* ABS462140* ABS562140*
0.59 N ABS162150* ABS462150* ABS562150*
Hinge lever 0.34 N ABS162240* ABS462240* ABS562240*
0.54 N ABS162250* ABS462250* ABS562250*
Long hinge lever 0.25 N ABS162340* ABS462340* ABS562340*
0.44 N ABS162350* ABS462350* ABS562350*
Simulated roller lever 0.34 N ABS162440* ABS462440* ABS562440*
0.54 N ABS162450* ABS462450* ABS562450*
Roller lever 0.39 N ABS162640* ABS462640* ABS562640*
0.59 N ABS162650* ABS462650* ABS562650*
Actuator Operating force
Max.
SPST-NC
Wire position
Straight Right angle Left angle
Pin plunger 0.98 N ABS162041* ABS462041* ABS562041*
1.47 N ABS162051* ABS462051* ABS562051*
Short hinge lever 0.39 N ABS162141* ABS462141* ABS562141*
0.59 N ABS162151* ABS462151* ABS562151*
Hinge lever 0.34 N ABS162241* ABS462241* ABS562241*
0.54 N ABS162251* ABS462251* ABS562251*
Long hinge lever 0.25 N ABS162341* ABS462341* ABS562341*
0.44 N ABS162351* ABS462351* ABS562351*
Simulated roller lever 0.34 N ABS162441* ABS462441* ABS562441*
0.54 N ABS162451* ABS462451* ABS562451*
Roller lever 0.39 N ABS162641* ABS462641* ABS562641*
0.59 N ABS162651* ABS462651* ABS562651*
Actuator Operating force
Max.
SPST-NC
Wire position
Straight Right angle Left angle
Pin plunger 0.98 N ABS162044* ABS462044* ABS562044*
1.47 N ABS162054* ABS462054* ABS562054*
Short hinge lever 0.39 N ABS162144* ABS462144* ABS562144*
0.59 N ABS162154* ABS462154* ABS562154*
Hinge lever 0.34 N ABS162244* ABS462244* ABS562244*
0.54 N ABS162254* ABS462254* ABS562254*
Long hinge lever 0.25 N ABS162344* ABS462344* ABS562344*
0.44 N ABS162354* ABS462354* ABS562354*
Simulated roller lever 0.34 N ABS162444* ABS462444* ABS562444*
0.54 N ABS162454* ABS462454* ABS562454*
Roller lever 0.39 N ABS162644* ABS462644* ABS562644*
0.59 N ABS162654* ABS462654* ABS562654*
All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.
4. Immersion protected type (2 wire leads type SPST-NO)
AgNi alloy
Au-clad triple layer
Au-clad double layer
* Agency standard: Please refer to “Ordering information”.
Actuator Operating force
Max.
SPST-NO
Wire position
Straight Right angle Left angle
Pin plunger 0.98 N ABS163040* ABS463040* ABS563040*
1.47 N ABS163050* ABS463050* ABS563050*
Short hinge lever 0.39 N ABS163140* ABS463140* ABS563140*
0.59 N ABS163150* ABS463150* ABS563150*
Hinge lever 0.34 N ABS163240* ABS463240* ABS563240*
0.54 N ABS163250* ABS463250* ABS563250*
Long hinge lever 0.25 N ABS163340* ABS463340* ABS563340*
0.44 N ABS163350* ABS463350* ABS563350*
Simulated roller lever 0.34 N ABS163440* ABS463440* ABS563440*
0.54 N ABS163450* ABS463450* ABS563450*
Roller lever 0.39 N ABS163640* ABS463640* ABS563640*
0.59 N ABS163650* ABS463650* ABS563650*
Actuator Operating force
Max.
SPST-NO
Wire position
Straight Right angle Left angle
Pin plunger 0.98 N ABS163041* ABS463041* ABS563041*
1.47 N ABS163051* ABS463051* ABS563051*
Short hinge lever 0.39 N ABS163141* ABS463141* ABS563141*
0.59 N ABS163151* ABS463151* ABS563151*
Hinge lever 0.34 N ABS163241* ABS463241* ABS563241*
0.54 N ABS163251* ABS463251* ABS563251*
Long hinge lever 0.25 N ABS163341* ABS463341* ABS563341*
0.44 N ABS163351* ABS463351* ABS563351*
Simulated roller lever 0.34 N ABS163441* ABS463441* ABS563441*
0.54 N ABS163451* ABS463451* ABS563451*
Roller lever 0.39 N ABS163641* ABS463641* ABS563641*
0.59 N ABS163651* ABS463651* ABS563651*
Actuator Operating force
Max.
SPST-NO
Wire position
Straight Right angle Left angle
Pin plunger 0.98 N ABS163044* ABS463044* ABS563044*
1.47 N ABS163054* ABS463054* ABS563054*
Short hinge lever 0.39 N ABS163144* ABS463144* ABS563144*
0.59 N ABS163154* ABS463154* ABS563154*
Hinge lever 0.34 N ABS163244* ABS463244* ABS563244*
0.54 N ABS163254* ABS463254* ABS563254*
Long hinge lever 0.25 N ABS163344* ABS463344* ABS563344*
0.44 N ABS163354* ABS463354* ABS563354*
Simulated roller lever 0.34 N ABS163444* ABS463444* ABS563444*
0.54 N ABS163454* ABS463454* ABS563454*
Roller lever 0.39 N ABS163644* ABS463644* ABS563644*
0.59 N ABS163654* ABS463654* ABS563654*
ABS1,4,5
All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.
ABS1,4,5
5. Immersion protected type (3 wire leads type SPDT)
• Leaf lever type
AgNi alloy
Au-clad triple layer
Au-clad double layer
6. Immersion protected type (2 wire leads type SPST-NC)
• Leaf lever type
AgNi alloy
Au-clad triple layer
Au-clad double layer
7. Immersion protected type (2 wire leads type SPST-NO)
• Leaf lever type
AgNi alloy
Au-clad triple layer
* Agency standard: Please refer to “Ordering information”.
Actuator Operating force
Max.
SPDT
Wire position
Straight Right angle Left angle
Leaf lever 0.88 N ABS161840* ABS461840* ABS561840*
1.08 N ABS161850* ABS461850* ABS561850*
Actuator Operating force
Max.
SPDT
Wire position
Straight Right angle Left angle
Leaf lever 0.88 N ABS161841* ABS461841* ABS561841*
1.08 N ABS161851* ABS461851* ABS561851*
Actuator Operating force
Max.
SPDT
Wire position
Straight Right angle Left angle
Leaf lever 0.88 N ABS161844* ABS461844* ABS561844*
1.08 N ABS161854* ABS461854* ABS561854*
Actuator Operating force
Max.
SPST-NC
Wire position
Straight Right angle Left angle
Leaf lever 0.88 N ABS162840* ABS462840* ABS562840*
1.08 N ABS162850* ABS462850* ABS562850*
Actuator Operating force
Max.
SPST-NC
Wire position
Straight Right angle Left angle
Leaf lever 0.88 N ABS162841* ABS462841* ABS562841*
1.08 N ABS162851* ABS462851* ABS562851*
Actuator Operating force
Max.
SPST-NC
Wire position
Straight Right angle Left angle
Leaf lever 0.88 N ABS162844* ABS462844* ABS562844*
1.08 N ABS162854* ABS462854* ABS562854*
Actuator Operating force
Max.
SPST-NO
Wire position
Straight Right angle Left angle
Leaf lever 0.88 N ABS163840* ABS463840* ABS563840*
1.08 N ABS163850* ABS463850* ABS563850*
Actuator Operating force
Max.
SPST-NO
Wire position
Straight Right angle Left angle
Leaf lever 0.88 N ABS163841* ABS463841* ABS563841*
1.08 N ABS163851* ABS463851* ABS563851*
All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.
Au-clad double layer
* Agency standard: Please refer to “Ordering information”.
SPECIFICATIONS
2. Characteristics
3. Operating characteristics
Actuator Operating force
Max. gf
SPST-NO
Wire position
Straight Right angle Left angle
Leaf lever 0.89 N ABS163844* ABS463844* ABS563844*
1.08 N ABS163854* ABS463854* ABS563854*
Mechanical life
(O.T.: Specified value)
Leaf lever Min. 5x105 (at 60 cpm)
Other types Min. 5x106 (at 60 cpm)
Electrical life at rated load
(O.T.: Max.)
AgNi alloy contact type Min. 5x104 (at 20 cpm)
Au-clad contact type Min. 2x105 (at 20 cpm)
Insulation resistance Min. 100 MΩ (at 500 V DC insulation resistance meter)
Dielectric strength
Between non-continuous terminals
Between each terminal and other exposed metal parts
Between each terminal and ground
1,000 Vrms
1,500 Vrms
1,500 Vrms
Vibration resistance (Pin plunger type) 10 to 55 Hz at single amplitude of 0.75 mm (Contact opening Max. 1 msec.)
Shock resistance (Pin plunger type) Min. 294 m/s2 (Contact opening Max. 1 msec.)
Contact resistance (Initial)
AgNi alloy contact type Dust protected type (IP50): Max. 50 mΩ
Immersion protected type (IP67): Max. 100 mΩ (By voltage drop 1 A 6 to 8 V DC)
Au-clad contact type Dust protected type (IP50): Max. 100 mΩ
Immersion protected type (IP67): Max. 150 mΩ (By voltage drop 0.1 A 6 to 8 V DC)
Allowable operating speed (at no load) 0.1 to 500 mm/sec.
Max. operating cycle rate (at no load) 120 cpm
Ambient temperature –40°C to +85°C
Unit weight Approx. 2 g (IP50 type)
Type of actuator Operating force, Max. Release force, Min. Pretravel, Max.
mm
Movement
differential,
Max. mm
Overtravel,
Min. mm
Operating
position,
mm
Pin plunger 0.98N 1.47N 0.15N 0.20N 0.6 0.1 0.4 8.4±0.3
Short hinge lever 0.39N 0.59N 0.034N 0.039N 2.5 0.5 0.8 8.8±0.8
Hinge lever 0.34N 0.54N 0.029N 0.034N 2.8 0.8 1.2 8.8±0.8
Long hinge lever 0.25N 0.44N 0.025N 0.029N 3.5 1.0 1.6 8.8±1.2
Simulated roller lever 0.34N 0.54N 0.029N 0.034N 2.8 0.8 1.2 11.65±0.8
Roller lever 0.39N 0.59N 0.034N 0.039N 2.5 0.5 0.8 14.5±0.8
Leaf lever 0.88N 1.08N 0.17N 0.20N 4.5 1.0 2.5 14.5±1.5
1. Contact rating
Low-level circuit rating (Au-clad contact type)
Voltage AgNi alloy contact type
Au-clad contact type
Au-clad
triple layer
Au-clad
twin layer
Resistive load Inductive load Resistive load
125 V AC 2 A 2 A 0.1 A —
250 V AC 2 A 2 A 0.1 A —
30 V DC 2 A 2 A 0.1 A 0.1 A
125 V DC 0.4 A 0.05 A — —
Rated voltage Resistive load
6 V DC 5 mA
12 V DC 2 mA
24 V DC 1 mA
Recommended contact material chart
classified by load voltage & current
(reference)
Remarks: If the contact is being used in the constant
low-level circuit load range, the Au-clad twin
layer contact is recommended. If there is a
danger of the current being less than 0.5 A,
for instance if the contact is being turned on
and off, the Au-clad triple layer type is
recommended.
Silver-alloy
Gold-clad double layer
2A
100mA
1mA
0DC
AC
5
5
15 30V
30 250V
Gold-clad triple layer
ABS1,4,5
All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.
ABS1,4,5
DIMENSIONS mm General tolerance: ±0.25
1. Dust protected type
1-(1) .110 quick-connect terminal
Pin plunger
7.6±0.3
3.4±0.1
11
7.1±0.15
5.5±0.1
1.2±0.05 dia.
2.4
7.7
+0.1
−0.05
2.4
2.5±0.1
19.8±0.3
7.6±0.15 7.6±0.15
9.5±0.1 4
2.8±0.1 C0.6
Position
Operating
8.4±0.3
11.8±0.4
6.7
Pretravel 0.6 max.
6.4±0.2
1.7 dia.
−0.05
+0.1
2.4 dia.
Pretravel, Max. mm 0.6
Movement differential,
Max. mm 0.1
Overtravel, Min. mm 0.4
Operating
position
Distance from
mounting hole,
mm
8.4±0.3
Distance from
stand-off,
mm
11.8±0.4
Short hinge lever
5±0.4
R18
Pretravel 2.5 max.
12.85
6.3
4
(3.7)
Position
8.8±0.8
Operating
12.2±0.9
Pretravel, Max. mm 2.5
Movement differential,
Max. mm 0.5
Overtravel, Min. mm 0.8
Operating
position
Distance from
mounting hole,
mm
8.8±0.8
Distance from
stand-off,
mm
12.2±0.9
Hinge lever
4
(3.7)
8.8±0.8
12.2±0.9
7.15±0.4
R20.2
Operating
Pretravel 2.8 max.
Position
Pretravel, Max. mm 2.8
Movement differential,
Max. mm 0.8
Overtravel, Min. mm 1.2
Operating
position
Distance from
mounting hole,
mm
8.8±0.8
Distance from
stand-off,
mm
12.2±0.9
Long hinge lever
4
(3.5)
Position
Operating
8.8±1.2
R26.1
Pretravel 3.5 max.
13.1±0.4
12.2±1.3
Pretravel, Max. mm 3.5
Movement differential,
Max. mm 1
Overtravel, Min. mm 1.6
Operating
position
Distance from
mounting hole,
mm
8.8±1.2
Distance from
stand-off,
mm
12.2±1.3
All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.
Simulated roller lever mm General tolerance: ±0.25
Pretravel 2.8 max.
11.65±0.8
Operating
Position
15.05±0.9
R2.5
R19.9
4
(3.5)
6.3±0.4
Pretravel, Max. mm 2.8
Movement differential,
Max. mm 0.8
Overtravel, Min. mm 1.2
Operating
position
Distance from
mounting hole,
mm
11.65±0.8
Distance from
stand-off,
mm
15.05±0.9
Roller lever
3.2
5 dia.
Pretravel 2.5 max.
5.15±0.4
17.9±0.9
Operating
Position
14.5±0.8
R18.9
Pretravel, Max. mm 2.5
Movement differential,
Max. mm 0.5
Overtravel, Min. mm 0.8
Operating
position
Distance from
mounting hole,
mm
14.5±0.8
Distance from
stand-off,
mm
17.9±0.9
1-(2) Solder terminal
3.4±0.15
2.5±0.1
9.5±0.1
8.7±0.15
15.4±0.15
2.8±0.2
19.8±0.3
-0.05
+0.1
2.4 dia.
+0.1
-0.05
2.4
2.4
2.4
1.9
7.4
1.1±0.12
1.5±0.12
0.5
1.85±0.2
1.25±0.1
5.2
6.4±0.2
Remarks: Dimensions of the actuator types are
the same as those of corresponding
.110 quick-connect terminal types.
1-(3) PC board terminal
Straight type
1.1±0.12
1.5±0.12
0.5
1.85±0.2
1.25±0.1
5.2
6.4±0.2
8.7±0.15
2.5±0.1
15.4±0.15
19.8±0.3
9.5±0.1 2.2
dia.
+0.1
-0.05
2.4
3.4±0.15
+0.1
2.4
7.4
2.4
-0.05
0.9
8.7±0.1
15.4±0.1
1.2±0.05 dia.
Remarks: Dimensions of the actuator types are
the same as those of corresponding
.110 quick-connect terminal types.
ABS1,4,5
All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.
ABS1,4,5
Right angle type mm General tolerance: ±0.25
7.62±0.15 7.62±0.15 0.5
5.08±0.2
6.4
7.62±0.1
3-1.5±0.05 dia.
7.62±0.1
Remarks: Dimensions of the actuator types are
the same as those of corresponding
.110 quick-connect terminal types.
Left angle type
5.08±0.2
0.5 6.4
7.62±0.15 7.62±0.15
1.3
7.62±0.15 7.62±0.15
(2.8)
1.3
3.2
6.4
6-C0.3
7.62±0.1
3-1.5±0.05 dia.
7.62±0.1
Remarks: Dimensions of the actuator types are
the same as those of corresponding
.110 quick-connect terminal types.
2. Immersion protected type
Wire leads
Pin plunger
Straight type
COM NO NC
21.2
9.2
300±10
5±2
dia.
-0.05
+0.1
2.4
6.4
Thickness of the lead wire: 0.5 mm2
UL/CSA approved type and Right/Left angle type:
AWG #20
Color of the lead wire:
COM...Black
N.C. ...Red
N.O. ...White
Remarks: 1. Other dimensions are the same as those of
.110 quick-connect terminal types.
2. Dimensions of the actuator types are the
same as those of corresponding .110 quick-
connect terminal types.
Right angle type Left angle type
5±2
300±10
5±2
300±10
All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.
Leaf lever mm General tolerance: ±0.25
Straight type
Pretravel 4.5 max.
1.5
Free Position
(16.5)
14.5±1.5
Operating Position
Totaltravel Position
(10.5 min.)
7.6±0.3 8±1
23.8±0.4
5±2
300±10
2.4 dia.
-0.05
+0.1
5
6.4
7.7
8.4 8.4
2.5±0.1
Thickness of the lead wire: 0.5 mm2
UL/CSA approved type and Right/Left angle type:
AWG #20
Color of the lead wire:
COM...Black
N.C. ...Red
N.O. ...White
Right angle type Left angle type
5
6.4
300±10
5±2
5
6.4
300±10
5±2
ABS1,4,5
All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.
