CUSTOMER : DATE : May. 01, 2015 REV : Rev. 5.0 PRODUCT FAMILY DATA SHEET 5630R Family Top View Type White SMD LED MODEL NAME : LEMWS59R Series RoHS Compliant CONTENTS 1. Features -------------------------------------------------------- 3 ---------------------------------------------- 3 --------------------------------------- 3 -------------------------------- 4 2. Applications 3. Outline Dimensions 4. Absolute Maximum Ratings 5. Electro - Optical Characteristics 6. Forward Voltage Bins 7. Chromaticity Bins ------------------------ ------------------------------------------------------------------------------------------- 8. Typical Characteristic Curves --------------------------------- 9. Reliability Test Items and Conditions 12. Disclaimers 5 6~9 10 ~ 18 ----------------------- 19 -------------------------- 20 ~ 24 ------------------------------------------------ 25 ~ 28 10. Packing and Labeling of Products 11. Cautions on Use 4~5 -------------------------------------------------------- Appendix. Product Nomenclature ---------------------------------- 2 / 30 28 29 1. Features - Light Color : White - Lead Frame Type LED Package : 5.6x3.0x0.9 mm (LxWxH) [Unit : mm] - Viewing angle : 120 - Chip Material : InGaN - Soldering Methods : Reflow Soldering - Taping : 12 mm conductive black carrier tape & antistatic clear cover tape 3,000 pcs/reel, 178 mm Reel 2. Applications - Indoor Lighting : Ambient Light, LED Tube and Ceiling Light 3. Outline Dimensions ( Unit : mm ) Tolerances Unless Dimension 0.1mm 3 / 30 4. Absolute Maximum Ratings Item ( Ta = 25 ) Symbol Rating Unit If 200 mA Ifp 260 mA Operating Temperature Topr -40 ~ +85 Storage Temperature Tstg -40 ~ +100 Junction Temperature Tj 110 Forward Current Peak Pulse Forward Current*1) Soldering Temperature JEDEC-J-STD-020 Class 2 (ANSI/ESDA/JEDEC JS-001) ESD Classification *1) Pulse width 10ms and duty cycle 10% Operating the LED beyond the listed maximum ratings may affect device reliability and cause permanent damage. These or any other conditions beyond those indicated under recommended operating conditions are not implied. The exposure to the absolute maximum rated conditions may affect device reliability. The LEDs are not designed to be driven in reverse bias. 5. Electro - Optical Characteristics Typical values measured by "Flux Class" only Nominal Min CCTs CRI 6500K (F) 5700K (G) 5000K (H) 4000K (J) ( Ta = 25, If = 65mA ) Flux Code Product Code Luminous Flux (lm) Flux Class1) Flux Bin2) Min Typ Max R1 24.0 R2 27.4 C R 31.2 31.9 33.5 LEMWS59R80FZ2DA0 D R4 33.5 34.3 35.1 80 LEMWS59R80GZ21A0 1 R1 24.0 R2 27.8 80 LEMWS59R80GZ2CA0 C R 31.6 32.9 33.8 80 LEMWS59R80GZ2DA0 D R4 33.8 34.6 35.4 80 LEMWS59R80HZ21A0 1 R1 25.0 R2 28.8 80 LEMWS59R80HZ2CA0 C R 31.9 32.9 34.1 80 LEMWS59R80HZ2DA0 D R4 34.1 34.9 35.7 80 LEMWS59R80JZ31A0 1 R1 24.0 R2 27.4 80 LEMWS59R80JZ3CA0 C R 30.6 31.6 32.8 80 LEMWS59R80JZ3DA0 D R4 32.8 33.6 34.4 90 LEMWS59R90JZ3AA0 A R 24.1 25.5 27.8 80 LEMWS59R80FZ21A0 1 80 LEMWS59R80FZ2CA0 80 *1) "Flux Class" is the 14th digit in the Product Code which is used for ordering 5630 Family LED's *2) "Flux Bin" is the flux as referenced on the product label (refer to 10-4 in section 10) 4 / 30 27.9 28.8 28.8 27.6 27.4 31.2 27.8 31.6 28.8 31.9 27.4 30.6 5. Electro - Optical Characteristics Typical values measured by "Flux Class" only Nominal Min CCTs CRI 3500K (K) 3000K (L) 2700K (M) ( Ta = 25, If = 65mA ) Flux Code Product Code Luminous Flux (lm) Flux Class1) Flux Bin2) Min Typ Max R1 23.5 R2 26.9 C R 30.0 30.9 32.2 LEMWS59R80KZ3DA0 D R4 32.2 33.0 33.8 90 LEMWS59R90KZ3AA0 A R 23.5 25.1 27.6 80 LEMWS59R80LZ31A0 1 R1 23.4 R2 27.4 80 LEMWS59R80LZ3CA0 C R 29.7 30.6 31.8 80 LEMWS59R80LZ3DA0 D R4 31.8 32.6 33.4 90 LEMWS59R90LZ3AA0 A R 23.2 24.9 26.7 80 LEMWS59R80MZ31A0 1 R1 22.6 R2 25.9 80 LEMWS59R80MZ3CA0 C R 27.3 29.0 30.2 80 LEMWS59R80MZ3DA0 D R4 30.2 31.0 31.8 90 LEMWS59R90MZ3AA0 A R 22.0 23.5 25.9 80 LEMWS59R80KZ31A0 1 80 LEMWS59R80KZ3CA0 80 *1) "Flux Class" is the 14th digit in the Product Code which is used for ordering 5630 Family LED's *2) "Flux Bin" is the flux as referenced on the product label (refer to 10-4 in section 10) 5 / 30 27.1 26.8 25.3 26.9 30.0 27.4 29.7 25.9 27.3 5. Electro - Optical Characteristics (Continued) Item Symbol Forward Voltage (Vf) (@65mA, Ta=25) ( Ta = 25, If = 65mA ) Flux Class CCT Min. Typ. Max. 1 All 2.80 2.90 3.10 A All 2.70 2.90 3.00 C All 2.70 2.85 3.00 D All 2.70 2.85 3.00 Refer to `Chromaticity Bins' Unit V Vf Color Cx / Cy All All Viewing Angle 21/2 All All - 120 - deg All All 80 - - - A 4000K~ 2700K 90 - - - Ra Color Rendering Index (Ra) - Thermal Resistance, Junction to Solder Point Rth j-s All All - 15 - /W Typical Temperature Coefficient of Forward Voltage*1) Vf / Tj All All -1.0 - -3.0 mV/ *1) Measured at Ta between 25 and 85. These values are measured by the LG Innotek optical spectrum analyzer within the following tolerances. Luminous Flux (v) : 7%, Forward Voltage (Vf) : 0.1V, Color Value : 0.005, CRI Value : 2, Although all LEDs are tested by LG Innotek equipment, some values may vary slightly depending on the conditions of the test equipment. 6. Forward Voltage Bins Bin Code Ranks by Flux Code 8A (2.70~ 2.75) 8B (2.75~ 2.80) ( Ta = 25, If = 65mA ) 9A (2.80~ 2.85) 9B (2.85~ 2.90) 0A (2.90~ 2.95) 0B (2.95~ 3.00) 1A (3.00~ 3.05) 1B (3.05~ 3.10) 1R1 / 1R2 AR / CR / DR4 Bin Structure : Please refer to the following example as below; Example#1) Bin Code : R1-L11-9B (Flux Bin Code = R1, Color Coordinate Bin Code = L11, Vf Bin Code = 9B) Example#2) Bin Code : R-L11-8B (Flux Bin Code = R, Color Coordinate Bin Code = L11, Vf Bin Code = 8B) 6 / 30 7. Chromaticity Bins (Cool White) LG Innotek complies with the ANSI C78.377A standard for its chromaticity bin structure. For each ANSI quadrangle for the CCT range of 4500K to 6500K, LG CIE Y Innotek provides 9 micro bins. CIE X Bin FB1 FB2 FB3 FB4 CIE X CIE Y 0.3028 0.3087 0.3098 0.3041 0.3041 0.3098 0.3108 0.3055 0.3055 0.3108 0.3119 0.3068 0.3087 0.3146 0.3154 0.3098 0.3304 0.3363 0.3296 0.3240 0.3240 0.3296 0.3229 0.3177 0.3177 0.3229 0.3162 0.3113 0.3363 0.3422 0.3352 0.3296 Bin GB1 GB2 GB3 GB4 CIE X CIE Y 0.3207 0.3263 0.3266 0.3212 0.3212 0.3266 0.3268 0.3217 0.3217 0.3268 0.3270 0.3222 0.3263 0.3320 0.3319 0.3266 0.3462 0.3513 0.3437 0.3389 0.3389 0.3437 0.3361 0.3316 0.3316 0.3361 0.3285 0.3243 0.3513 0.3565 0.3485 0.3437 Bin HB1 HB2 HB3 HB4 7 / 30 CIE X CIE Y 0.3376 0.3434 0.3428 0.3373 0.3373 0.3428 0.3422 0.3369 0.3369 0.3422 0.3416 0.3366 0.3434 0.3493 0.3484 0.3428 0.3616 0.3664 0.3579 0.3534 0.3534 0.3579 0.3494 0.3451 0.3451 0.3494 0.3408 0.3369 0.3664 0.3712 0.3624 0.3579 Bin IB1 IB2 IB3 IB4 CIE X CIE Y 0.3548 0.3611 0.3595 0.3536 0.3536 0.3595 0.3580 0.3524 0.3524 0.3580 0.3565 0.3512 0.3611 0.3673 0.3655 0.3595 0.3736 0.3782 0.3689 0.3646 0.3646 0.3689 0.3596 0.3555 0.3555 0.3596 0.3503 0.3465 0.3782 0.3828 0.3732 0.3689 7. Chromaticity Bins (Continued) Bin FB5 FB6 FB7 FB8 FB9 CIE X CIE Y 0.3098 0.3296 0.3154 0.3162 0.3352 0.3282 0.3108 0.3108 0.3229 0.3229 0.3162 0.3282 0.3170 0.3119 0.3212 0.3162 0.3146 0.3205 0.3422 0.3481 0.3210 0.3408 0.3154 0.3154 0.3352 0.3352 0.3210 0.3216 0.3408 0.3334 0.3162 0.3162 0.3216 0.3221 0.3170 0.3261 0.3212 Bin CIE X CIE Y 0.3266 0.3437 0.3319 0.3319 0.3485 0.3406 0.3268 0.3268 0.3361 0.3361 0.3319 0.3406 0.3318 0.3270 0.3327 0.3285 0.3320 0.3376 0.3565 0.3616 0.3373 0.3534 0.3319 0.3319 0.3485 0.3485 0.3373 0.3369 0.3534 0.3451 0.3282 0.3319 0.3282 0.3334 0.3319 0.3369 0.3366 0.3318 0.3369 0.3327 GB5 GB6 GB7 GB8 GB9 Bin CIE X CIE Y 0.3428 0.3579 0.3484 0.3474 0.3624 0.3536 0.3422 0.3422 0.3494 0.3494 0.3474 0.3536 0.3465 0.3416 0.3448 0.3408 0.3493 0.3551 0.3712 0.3760 0.3539 0.3669 0.3484 0.3484 0.3624 0.3624 0.3539 0.3527 0.3669 0.3578 0.3406 0.3474 0.3406 0.3451 0.3474 0.3527 0.3515 0.3465 0.3487 0.3448 HB5 HB6 HB7 HB8 HB9 8 / 30 Bin CIE X CIE Y 0.3595 0.3689 0.3655 0.3636 0.3732 0.3636 0.3580 0.3580 0.3596 0.3596 0.3636 0.3636 0.3617 0.3565 0.3540 0.3503 0.3673 0.3736 0.3828 0.3874 0.3714 0.3775 0.3655 0.3655 0.3732 0.3732 0.3714 0.3692 0.3775 0.3677 0.3536 0.3636 0.3636 0.3536 0.3578 0.3636 0.3692 0.3636 0.3677 0.3670 0.3617 0.3578 0.3540 IB5 IB6 IB7 IB8 IB9 7. Chromaticity Bins (Neutral & Warm White) LG Innotek complies with the ANSI C78.377A standard for its chromaticity bin structure. For each ANSI quadrangle for the CCT range of 2700K to 4000K, LG Innotek provides 16 micro bins. 0.44 CIE Y 0.42 0.40 0.38 0.36 0.34 0.36 0.38 0.40 0.42 0.44 0.46 0.48 0.50 CIE X Bin J11 J12 J13 J14 CIE X CIE Y 0.3736 0.3804 0.3785 0.3841 0.3720 0.3800 0.3720 0.3800 0.3785 0.3841 0.3766 0.3765 0.3703 0.3804 Bin CIE X CIE Y 0.3874 0.3996 0.3917 0.4071 0.4041 0.3969 0.3969 0.3932 0.3969 0.3932 0.4041 0.3969 0.4012 0.3885 0.3726 0.3941 0.3917 0.4071 0.3871 0.3959 0.3849 0.3881 0.3785 0.3841 0.3785 0.3841 0.3849 0.3881 0.3828 0.3803 0.3766 0.3765 K11 K12 K13 K14 Bin CIE X CIE Y 0.4015 0.4299 0.4052 0.4364 0.4323 0.4098 0.4260 0.4075 0.4260 0.4075 0.4323 0.4098 0.4282 0.4008 0.3848 0.4221 0.4052 0.4364 0.4146 0.4089 0.4114 0.4005 0.4041 0.3969 0.4041 0.3969 0.4114 0.4005 0.4082 0.3922 0.4012 0.3885 L11 L12 L13 L14 9 / 30 Bin CIE X CIE Y 0.4165 0.4562 0.4260 0.4189 0.4625 0.4275 0.4575 0.4181 0.4513 0.4166 0.4513 0.4166 0.4575 0.4181 0.4525 0.4087 0.3984 0.4465 0.4071 0.4189 0.4625 0.4275 0.4430 0.4212 0.4687 0.4289 0.4387 0.4122 0.4637 0.4196 0.4323 0.4098 0.4575 0.4181 0.4323 0.4098 0.4575 0.4181 0.4387 0.4122 0.4637 0.4196 0.4344 0.4032 0.4586 0.4103 0.4282 0.4008 0.4525 0.4087 M11 M12 M13 M14 7. Chromaticity Bins (Continued) Bin J21 J22 J23 J24 J31 J32 J33 J34 J41 J42 J43 J44 CIE X CIE Y 0.3703 0.3766 0.3746 0.3687 0.3687 0.3746 0.3727 0.3670 0.3766 0.3828 0.3806 0.3746 0.3746 0.3806 0.3784 0.3727 0.3871 0.3939 0.3915 0.3849 0.3849 0.3915 0.3890 0.3828 0.3939 0.4006 0.3979 0.3915 0.3915 0.3979 0.3952 0.3890 0.3828 0.3890 0.3866 0.3806 0.3806 0.3866 0.3841 0.3784 0.3890 0.3952 0.3925 0.3866 0.3866 0.3925 0.3898 0.3841 0.3726 0.3765 0.3689 0.3652 0.3652 0.3689 0.3613 0.3578 0.3765 0.3803 0.3725 0.3689 0.3689 0.3725 0.3647 0.3613 0.3959 0.4002 0.3922 0.3881 0.3881 0.3922 0.3842 0.3803 0.4002 0.4044 0.3962 0.3922 0.3922 0.3962 0.3880 0.3842 0.3803 0.3842 0.3762 0.3725 0.3725 0.3762 0.3682 0.3647 0.3842 0.3880 0.3798 0.3762 0.3762 0.3798 0.3716 0.3682 Bin K21 K22 K23 K24 K31 K32 K33 K34 K41 K42 K43 K44 CIE X CIE Y 0.3941 0.4012 0.3982 0.3915 0.3915 0.3982 0.3950 0.3889 0.4012 0.4082 0.4050 0.3982 0.3982 0.4050 0.4017 0.3953 0.4146 0.4223 0.4187 0.4114 0.4114 0.4187 0.4151 0.4082 0.4223 0.4299 0.4260 0.4187 0.4187 0.4260 0.4221 0.4151 0.4082 0.4151 0.4117 0.4050 0.4050 0.4117 0.4082 0.4017 0.4151 0.4221 0.4184 0.4117 0.4117 0.4184 0.4147 0.4082 0.3848 0.3885 0.3803 0.3769 0.3769 0.3803 0.3721 0.3690 0.3885 0.3922 0.3837 0.3803 0.3803 0.3837 0.3752 0.3721 0.4089 0.4127 0.4040 0.4005 0.4005 0.4040 0.3953 0.3922 0.4127 0.4165 0.4075 0.4040 0.4040 0.4075 0.3984 0.3953 0.3922 0.3953 0.3868 0.3837 0.3837 0.3868 0.3783 0.3752 0.3953 0.3984 0.3899 0.3868 0.3868 0.3899 0.3814 0.3783 Bin L21 L22 L23 L24 L31 L32 L33 L34 L41 L42 L43 L44 10 / 30 CIE X CIE Y 0.4221 0.4282 0.4243 0.4184 0.4184 0.4243 0.4203 0.4147 0.4282 0.4344 0.4302 0.4243 0.4243 0.4302 0.4260 0.4203 0.4430 0.4496 0.4450 0.4387 0.4387 0.4450 0.4404 0.4344 0.4496 0.4562 0.4513 0.4450 0.4450 0.4513 0.4465 0.4404 0.4344 0.4404 0.4360 0.4302 0.4302 0.4360 0.4316 0.4260 0.4404 0.4465 0.4419 0.4360 0.4360 0.4419 0.4373 0.4316 0.3984 0.4008 0.3921 0.3899 0.3899 0.3921 0.3834 0.3814 0.4008 0.4032 0.3943 0.3921 0.3921 0.3943 0.3853 0.3834 0.4212 0.4236 0.4144 0.4122 0.4122 0.4144 0.4052 0.4032 0.4236 0.4260 0.4166 0.4144 0.4144 0.4166 0.4071 0.4052 0.4032 0.4052 0.3962 0.3943 0.3943 0.3962 0.3873 0.3853 0.4052 0.4071 0.3982 0.3962 0.3962 0.3982 0.3893 0.3873 Bin M21 M22 M23 M24 M31 M32 M33 M34 M41 M42 M43 M44 CIE X CIE Y 0.4465 0.4525 0.4477 0.4419 0.4419 0.4477 0.4428 0.4373 0.4525 0.4586 0.4535 0.4477 0.4477 0.4535 0.4483 0.4428 0.4687 0.4750 0.4697 0.4637 0.4637 0.4697 0.4643 0.4586 0.4750 0.4813 0.4756 0.4697 0.4697 0.4756 0.4700 0.4643 0.4586 0.4643 0.4590 0.4535 0.4535 0.4590 0.4538 0.4483 0.4643 0.4700 0.4646 0.4590 0.4590 0.4646 0.4593 0.4538 0.4071 0.4087 0.3996 0.3982 0.3982 0.3996 0.3906 0.3893 0.4087 0.4103 0.4011 0.3996 0.3996 0.4011 0.3918 0.3906 0.4289 0.4304 0.4209 0.4196 0.4196 0.4209 0.4115 0.4103 0.4304 0.4319 0.4223 0.4209 0.4209 0.4223 0.4126 0.4115 0.4103 0.4115 0.4023 0.4011 0.4011 0.4023 0.3931 0.3918 0.4115 0.4126 0.4035 0.4023 0.4023 0.4035 0.3944 0.3931 8. Typical Characteristic Curves Forward Current vs. Forward Voltage Relative Luminous Flux vs. Forward Current Ta = 25 Relative Luminous Flux [%] 5000K 3000K Forward Current [mA] 5000K CCT data also applies to 5700K and 6500K CCTs and 3000K data also applies to 2700K, 3500K and 4000K CCTs. 11 / 30 8. Typical Characteristic Curves Spectrum 6500K (F) 5700K (G) 12 / 30 8. Typical Characteristic Curves Spectrum 5000K (H) 13 / 30 8. Typical Characteristic Curves Spectrum 4000K (J) Ta=25, If=65mA Ta=25, If=65mA CRI > 90 CRI > 80 3500K (K) Ta=25, If=65mA Ta=25, If=65mA CRI > 90 CRI > 80 14 / 30 8. Typical Characteristic Curves Spectrum 3000K (L) Ta=25, If=65mA Ta=25, If=65mA CRI > 90 CRI > 80 2700K (M) Ta=25, If=65mA Ta=25, If=65mA CRI > 90 CRI > 80 15 / 30 8. Typical Characteristic Curves Chromaticity Coordinate vs. Forward Current 5000K (H) 3000K (L) 5000K CCT data also applies to 5700K and 6500K CCTs and 3000K data also applies to 2700K, 3500K and 4000K CCTs. 16 / 30 8. Typical Characteristic Curves Radiation Characteristics Ta 25, If = 65mA Ta 25, If = 65mA X-X Y-Y 0 0 -30 -60 50 0 50 30 -60 60 -90 100 -30 30 90 100 60 -90 100 Luminous Flux vs. Temperature 17 / 30 50 0 50 90 100 8. Typical Characteristic Curves Chromaticity Coordinate vs. Temperature 5000K (H) 3000K (L) 5000K CCT data also applies to 5700K and 6500K CCTs and 3000K data also applies to 2700K, 3500K and 4000K CCTs. 18 / 30 8. Typical Characteristic Curves Forward Voltage vs. Temperature Derating Curve The ambient temperature values for each graph are obtained with LG Innotek equipment. 19 / 30 9. Reliability Test Items and Conditions 9-1. Failure Criteria Items Symbols Test Conditions Forward Voltage Vf Luminous Flux V Criteria Min. Max. If = 65mA - Initial Value 1.1 If = 65mA Initial Value 0.7 - 9-2. Reliability Tests No Items Test Conditions Test Hours /Cycles 1 Room Temperature Operating Life (RTOL) Ta = 25, If = 200mA 1,000 Hours 2 Wet High Temperature Operating Life (WHTOL) Ta = 60, RH = 90%, If = 200mA 1,000 Hours 3 High Temperature Operating Life (HTOL) Ta = 85, If = 200mA 1,000 Hours 4 Low Temperature Operating Life (LTOL) Ta = -40, If = 200mA 1,000 Hours 5 High Temperature Storage Life (HTSL) Ta = 100 1,000 Hours 6 Low Temperature Storage Life (LTSL) Ta = -40 1,000 Hours 7 Wet High Temperature Storage Life (WHTSL) Ta = 85, RH = 85% 1,000 Hours 8 Thermal Shock (TMSK) 100 ~ -40 Dwell : 15 min., Transfer : 10 sec. 100 Cycles 9 Moisture Sensitivity Level (MSL) Tsld = 260 (Pre treatment 60,60%,168 hours) 3 Times All samples are tested using LG Innotek Standard Metal PCB (25x25x1.6 mm3(LxWxH)) except MSL test . All samples must pass each test item and all test items must be satisfied. 20 / 30 10. Packing and Labeling of Product 10-1. Taping Outline Dimensions Reel ( Unit : mm ) Packing Materials : - Reel : Conductive PS (Black) - Emboss Tape : Conductive PS (Black) - Cover Tape : Conductive PET Base Tape Polarity Direction Cathode Anode Taping Arrangement (End) (Start) Unloaded Tape (Min. 200mm) Mounted with LED (3,000 pcs) 21 / 30 Unloaded Tape (Min. 40mm) Leading Part (150 ~ 600mm) 10. Packing and Labeling of Product 10-2. Packing Structures Reeled products are packed in a sealed-off and moisture-proof aluminum bag with desiccants (silica gel) and Humidity Indicator Card(HIC). A maximum of four aluminum bags are packed in an inner box and six inner boxes are packed in an outer box. Label A Vacuum Packing Label A HIC Silica gel Label A or B ( MES : A , NEDA : B) Sizes (mm) Types Inner Box 227 82 258 Outer Box 530 240 280 Tolerance : 10 mm Label C Box No. of Total Q'ty 22 / 30 10. Packing and Labeling of Product 10-3. MES Label Structure . Label A Specifying Model Name, Rank, Rack, Quantity and Run number 2C11001-A003 Lot ID : PPWS03R063M000101 <Example> Ver : 1.00 Model : LEMWS59R80FZ2B00 Q'ty : 3000[pcs] MES ID : LB5DF Run No : F00401-4517 RANK : R-FB1-0A Rack No : C-107 LB5DF=R-FB1-0A=3000=F00401-4517=C-107 R-FB1-0A LG Innotek Co., Ltd. 80mm Run No. indication 1 2 Code 3 4 5 6 7 8 9 10 Manufactured Manufactured Manufactured Site Year Month Manufactured date TH # Serial No 2013 : 3 *** 2020 : 0 2021 : 1 ( 01~31) ( 00 ~ 99 ) ( 00 ~ ZZ ) Paju :1 Huizhou : 9 1~9 : 1~9 10 : A 11 : B 12 : C . Label C Specifying Customer, Date, Model Name, Quantity, Customer Part no, Outbox ID, Rank/Rank Q'ty <Example> OutBox Customer 2013.09.10 LEMWS59R80FZ2B00/3000 PSO2221003 40mm R-FB1-0A =3000 80mm Box ID. indication 1 2 3 Manufacture Site PKG Site Box Paju :P Huizhou : H PKG : S, P Inner Box : I Outer Box : O 4 5 6 7 8 9 Year Month Date Serial No 2013 : 3 *** 2020 : 0 2021 : 1 1~9 : 1~9 10 : A 11 : B 12 : C ( 01 ~ 31) ( 001 ~ 999 ) 23 / 30 10 10. Packing and Labeling of Product 10-4. NEDA Label Structure Label A Specifying `Manufacturing Part Number', `Quantity', `Bin Code', `Lot', `Date Code' and `Country of Origin' Manuf Part Number (1P): LEMWS59R80FZ2BA0 Qty(Q): 3000 Date Code(9D): 1301 Country of Origin (4L) Bin Code: R-FB1-0A 40mm CN Lot#(1T): DPMWY5K25VP003900 LG Innotek 80mm Date Code(9D) 1 Lot#(1T) 2 3 LG Innotek Trace Code 4 Year Week 01~99 01~52 Bin Code 1 2 1 Flux 2 3 1 2 Forward Voltage Color Coordinates Label B Specifying `Manufacturing Part Number', `Quantity', `Bin Code', `Trans ID', `Date Code', `Country of Origin' and `Inner Box ID' Manuf Part Number (1P): LEMWS73V80JZ31A0 Qty(Q): 12000 Trans ID (K): IAP5X8 40mm Bin Code: V1-J21-2 INNER BOX ID: LG Innotek 80mm 24 / 30 Date Code(9D): 1301 Country of Origin (4L) HSI2531198 CN 10. Packing and Labeling of Product 10-4. NEDA Label Structure Label C Specifying `Manufacturing Site', `Customer Address', `Manufacturing Part Number', `Bin Code', `Box ID', `Trans ID' and `Quantity' FROM: LG InnotekHuiZhouCo., Ltd District 18,ZhongKai Hi-Tech Industry Development Zone, Huizhou ,Guangdong, China TO: Manuf Part Number (1P): LEMWS59R80FZ2BA0 Trans ID (K): IAP5X8 40mm Bin Code: R-FB1-0A Qty(Q): 72000 BOX ID: HSO2531048 80mm Box ID indication 1 Site Paju: P Huizhou: H 2 3 4 Code Outbox Year S, P 13 : 3 Outbox: O 14 : 4 Inbox: I 15 : 5 5 6 7 8 9 Month Date Serial No 1~9 : 1~9 10 : A 11 : B 12 : C ( 01 ~ 31) ( 001 ~ 999 ) 25 / 30 10 11. Cautions on Use 11-1. Moisture-Proof Package -. The moisture in the SMD package may vaporize and expand during soldering. -. The moisture can damage the optical characteristics of the LEDs due to the encapsulation. 11-2. During Storage Conditions Temperature Humidity Time Before Opening Aluminum Bag 5 ~ 30 50%RH Within 1 Year from the Delivery Date After Opening Aluminum Bag 5 ~ 30 60%RH 672 hours 65 5 10%RH 10 ~ 24 hours Storage Baking 11-3. During Usage -. The LED should avoid direct contact with hazardous materials such as sulfur, chlorine, phthalate, etc. -. The metal parts on the LED can rust when exposed to corrosive gases. Therefore, exposure to corrosive gases must be avoided during operation and storage. -. The silver-plated metal parts also can be affected , not only by the corrosive gases emitted inside of the end-products but by the gases penetrated from the outside environment. -. Extreme environments such as sudden ambient temperature changes or high humidity that can cause condensation must be avoided. 11-4. Cleaning -. Do not use brushes for cleaning or organic solvents (i.e. Acetone, TCE, etc..) for washing as they may damage the resin of the LEDs. -. Isopropyl Alcohol(IPA) is the recommended solvent for cleaning the LEDs under the following conditions. Cleaning Condition : IPA, 25 max. x 60sec max. -. Ultrasonic cleaning is not recommended. -. Pretests should be conducted with the actual cleaning process to validate that the process will not damage the LEDs. 26 / 30 11. Cautions on Use 11-5. Thermal Management -. The thermal design of the end product must be seriously considered, particularly at the beginning of the system design process. -. The generation of heat is greatly impacted by the input power, the thermal resistance of the circuit boards and the density of the LED array combined with other components. 11-6. Static Electricity -. Wristbands and anti-electrostatic gloves are strongly recommended and all devices, equipment and machinery must be properly grounded when handling the LEDs, which are sensitive against static electricity and surge. -. Precautions are to be taken against surge voltage to the equipment that mounts the LEDs. -. Unusual characteristics such as significant increase of current leakage, decrease of turn-on voltage, or non-operation at a low current can occur when the LED is damaged. 11-7. Recommended Circuit -. The current through each LED must not exceed the absolute maximum rating when designing the circuits. -. In general, there can be various forward voltages for LEDs. Different forward voltages in parallel via a single resistor can result in different forward currents to each LED, which also can output different luminous flux values. In the worst case, the currents can exceed the absolute maximum ratings which can stress the LEDs. Matrix circuit with a single resistor for each LED is recommended to avoid the luminous flux fluctuations. L1 RL1 RL2 L2 L3 RL3 Fig.1 Recommended Circuit in Parallel Mode : Separate resistors must be used for each LED. -. The driving circuits must be designed to operate the LEDs by forward bias only. -. Reverse voltages can damage the zener diode, which can cause the LED to fail. -. A constant current LED driver is recommended to power the LEDs. 27 / 30 11. Cautions on Use 11-8. Soldering Conditions -. Reflow soldering is the recommended method for assembling LEDs on a circuit board. -. LG Innotek does not guarantee the performance of the LEDs assembled by the dip soldering method. -. Recommended Soldering Profile (according to JEDEC J-STD-020D) Profile Feature Pb-Free Assembly Pb-Based Assembly Preheat / Soak Temperature Min (Tsmin) Temperature Max (Tsmax) Maximum time(ts) from Tsmin to Tsmax 150 200 60~120 seconds 100 150 60~120 seconds Ramp-up rate (TL to Tp) 3/ second max. 3/ second max. Liquidous temperature (TL) 217 183 Time (tL) maintained above TL 60~150 seconds 60~150 seconds Maximum peak package body temperature (Tp) 260 235 Time(tp) within 5 of the specified temperature (Tc) 30 seconds 20 seconds Ramp-down rate (Tp to TL) 6/second max. 6/second max. Maximum Time 25 to peak temperature 8 minutes max. 6 minutes max. -. Reflow or hand soldering at the lowest possible temperature is desirable for the LEDs although the recommended soldering conditions are specified in the above diagrams. -. A rapid cooling process is not recommended for the LEDs from the peak temperature. -. The silicone encapsulant at the top of the LED package is a soft surface, which can easily be damaged by pressure. Precautions should be taken to avoid strong pressure on the silicone resin when leveraging the pick and place machines. -. Reflow soldering should not be done more than two times. 28 / 30 11. Cautions on Use 11-9. Soldering Iron -. The recommended condition is less than 5 seconds at 260. -. The time must be shorter for higher temperatures. (+10 -1sec). -. The power dissipation of the soldering iron should be lower than 15W and the surface temperature of the device should be controlled at or under 230. 11-10. Eye Safety Guidelines -. Do not directly look at the light when the LEDs are on. -. Proceed with caution to avoid the risk of damage to the eyes when examining the LEDs with optical instruments. 11-11. Manual Handling -. Use Teflon-type tweezers to grab the base of the LED and do not apply mechanical pressure on the surface of the encapsulant. 12. Disclaimers -. LG Innotek is not responsible for any damages or accidents caused if the operating or storage conditions exceed the absolute maximum ratings recommended in this document. -. The LEDs described in this document are intended to be operated by ordinary electronic equipment. -. It is recommended to consult with LG Innotek when the environment or the LED operation is nonstandard in order to avoid any possible malfunctions or damage to product or risk of life or health. -. Disassembly of the LED products for the purpose of reverse engineering is prohibited without prior written consent from LG Innotek. All defected LEDs must be reported to LG Innotek and are not to be disassembled or analyzed. -. The product information can be modified and upgraded without prior notice. 29 / 30 Appendix. Product Nomenclature All LEDs are tested and sorted by color, luminous flux and forward voltage where every LED in a tube has only a single color bin, luminous flux bin and forward voltage bin. However, the forward voltage bin information is not captured in the part number nomenclature. A 16-digit part number is consisted as below; LG Innotek leverages the following part number nomenclature. PKG Type Color Type LE = Light S H MW = Multi Mixing White Emitting Diode = SMD Type = High Power SMD Type Label Code 0 = MES A = NEDA PKG Dimension 59 = 5630 PKG 1 2 3 4 5 6 7 8 9 10 Revision 11 12 13 14 15 16 Flux Class 1/A/C/D Product Family LEMWS59Q = 5630Q LEHWS59Q = 5630Q' LEMWS59R = 5630R Series CIE Micro Binning Code 2 = 9 Bins 3 = 16 Bins Ordering Information Special Code CCT Min. CRI Example : LEMWS59R80LZ3CA0 would be: Product Family = LEMWS59R = 5630R Series CRI = 80 CCT(Nominal) = L = 3000K Special Code = Z = n/a CIE Micro Bins = 3 = 16 ANSI Bin Structure Flux Class = C = min 31.2 lm ~ Label Code = A = NEDA Revision = 0 *1) "Flux Class" is the 14th digit in the Product Code which is used for ordering 5630 Family LED's *2) "Flux Bin" is the flux as referenced on the product label (refer to 10-4 in section 10) 30 / 30 Datasheet MODEL 5630 Family DOCUMENT No. - REG.DATE 2014.05.12 REV. No. 5.0 REV.DATE 2015.05.01 PAGE - History of Revision Revision Date Contents Revision Rev. 0.0 14.05.12 New Establishment Rev. 1.0 14.07.15 Modify the Flux Range Rev. 2.0 14.08.21 Modify the Flux Range (3500K, 3000K) Page 4 Rev. 3.0 15.02.05 Change the Maximum Flux Value (All CCTs) Page 4 Rev. 4.0 15.04.22 Add the "Flux Class D" Rev. 5.0 15.05.01 Add the Typical Value for all 5630 Series 31 / 30 Remark Page 3, 5 Page 4, 5 Page 4,5 and 6