Amphenol (R) Tru-Loc(R) Splitter Amphenol Industrial Tru-Loc(R) Splitter for Harsh Environments Amphenol Industrial introduces a Splitter connector complimentary to its Tru-Loc(R) family of products. The Tru-Loc(R) Splitter is designed to take a single 6-Way Tru-Loc(R) Plug and split the signal or power into two identical 6-Way Tru-Loc Plugs without degradation or intermittency. The Tru-Loc(R) Splitter features a molded thermoplastic body resistant to many fluids, including diesel fuel making this series ideal for harsh environments. True to the series, the Tru-Loc(R) Splitter is vibration resistant to 32 grms, IP67 rated and can withstand operating temperatures up to 150C. Amphenol's Splitter offers a means to combine many sensors into a single Engine Control Unit. The Splitter effectively branches a single six-circuit connector harness into two individual sixcircuit connector harnesses while maintaining a matched impedance of 120 Ohms between the I/O power circuits and CAN circuits. The greatest benefit is being able to put both Power and CAN into a single connector harness reducing the number of connectors and harnesses produced by 2x for the CAN application. Amphenol Industrial offers a 6-Way Plug with contacts for either 16AWG or 20AWG wire and a 6-Way Terminating Resistor Plug - fitted with a 120 Ohm resistor for use at the end of the bus. Features: * * * * * * Ingress Protection - IP67 rated Gold Plated 1.5mm Pin Contacts Resilient up to 32 grms vibration Dielectric Withstanding Voltage - 1600 Vac RMS Matched Impedance 120 Ohms, 2 pairs Operating Temperature -40C to 150C www.amphenol-industrial.com IDS-83 Material Specification (R) Plug with RADSOK Socket Contacts Plug Body Wire Seal Main Joint Seal Socket Contact Nylon Silicone Fluoroelastomer Copper Alloy w/ Stainless Steel Hood Receptacle with Pin Contacts Receptacle Body Pin Contact Nylon Copper Alloy Electrical Specifications Dielectric Withstanding Voltage (Test Voltage) Current Rating Insulation Resistance 1600 Vac RMS 13 amp (DC) (16 AWG Cable) 100 M Ohms Mechanical Specifications Connector Mating Force Contact Retention Vibration Operating Temperature Range Ingress Protection Durability (Mating Cycle) <70 N (15.7 lb) Primary Only: 80 N (18.0 lb) Secondary Only: 60 N (13.5 lb) 32 g RMS -40/+125C or +150C depending on PN; 100 cycles, 1 hour per cycle IP67 20 cycles Description Receptacle Additional Information 2way Plug (Plug Body, Locking Collar, and Main Joint Seal) 125C Tru-Loc Splitter Receptacle for 6 Way Plugs 2way Plug (Plug Body, 150C 44.5 Locking Collar, and Main Joint Seal) 10-707003-002 4way Plug (Plug Body, Locking Collar, and Main Joint Seal) 150C 15 20 3 10-707508-02X(X: A,B,C,D) 6way Plug (Plug Body, Locking Collar, and Main Joint Seal) 4 indexes available, 150C 2.8 10-707516-001 2way receptacle 5.4 150C 23 10-707517-001 4way receptacle PORT 1 150C1.3 6 Places 5.5 10-707509-00X(X: A,B,C,D) 6way receptacle 4 indexes available, 150C 6 Places 10-838137-00D Wire seal (silicone) To be used with insulated wires with insulation between 1.8-2.5 mm 5.46 10-838137-01D Wire seal (silicone) To be used with insulated wires with insulation between 1.2-1.8 mm 10-730605-002 Stamped 0.65 and formed female socket, Au+PdNi plating Crimps to wire from 0.8-1.3 sq. mm 2.2 10-707515-002 Stamped SOCKET and formed PRE-LOAD male pin, Au+ PdNi plating Crimps to wire from 0.8-1.3 sq. mm RECESS 5.46 POSITION 10-707515-0M2 Machined male pin, Au+PaNi plating Crimps to wire from 0.8-1.3 sq. mm 10.92 10-730179-002 Stamped and formed female socket, Au+PdNi plating Crimps to wire from 0.5-0.8 sq. mm 10-730764-002 Stamped and formed male pin, Au+ PdNi plating Crimps to wire from 0.5-0.8 sq. mm 6 Way Tru-Loc C10-708354-000 Size 20 AWG hand crimp tool PORT 2 PORT 3 120 Omh x 0.4 44.5 16-18 AWG hand crimp C10-730690-000 Size toolResister Resistor Plug Watt 15 20 (Dimensions are the 3 same* asSocket the standard Contacts are on reels of 4,200 pieces and pin contacts arePart on Number reels of 4000Description pieces 6 Way Plug) * Tru-Loc For Crimp Information please contact factory 23 C10-708354-000 Hand crimper with 20-22 AWG Die GROMMETS * Cable seals are sold separately and mustWIRE be used in all C10-708360-000 6 Way Tru-Loc Dummy Plug cavities and on both sides of the connection system C10-708305-000 6 Way Tru-Loc Resistor Plug PlugAIPG Part Number 10-838275-000 6 Way Tru-Loc Plug 10-838275-002 REAR OF PLUG FILLED WITH POTTING(R)COMPOUND C10-708353-000 (R) 6 Way Tru-Loc Plug, Gold Contacts for 20 AWG Wire For additional information on the Amphe-Power family of connectors C10-729337-18P with RADSOK Tru-Loc Splitter Receptacle for 6 Way Plugs (R) 5.46 Technology, please ask for our RADSOK Catalog (SL-391) or download it from the Catalogs Ask about our custom matched impedance cable with 2 sets of section of our website. 20AWG twisted pairs, each rated for 120 Ohms impedance. Notice: Specifications are subject to change without notice. Contact your nearest Amphenol Corporation Sales Office for the latest specifications. All statements, information and data given herein are believed to be accurate and reliable but are presented without guarantee, warranty, or responsibility of any0.65 kind, expressed or implied. Statements of suggestions concerning possible use of our products are made without representation or warranty that any such use is free of patent infringement and are not 2.2 measures are indicated or that other measures may not be required. Specifications are typical and may not apply to all connectors. recommendations to infringe any patent. The user should assume that all safety SOCKET For additional information family of Tru-Loc products, RECESS on Amphenol's 5.46 POSITION For further information on your individual application requirements, contact: Amphenol Corporation PRE-LOAD download it from our website in the Data Sheets section. 10.92 please ask for our Tru-Loc data sheet (IDS-16) or Europe: North America: Middle East: Amphenol Industrial Operations Europe Amphenol Industrial Operations Amphenol Middle East Enterprises FZE Via Barbaiana 5 For further information your4individual application requirements, contact: Amphenol Corporation 180 N. Freeport Drive,on Plant Office C-37 PO Box 21107 1-20020 Lainate (MI) Italy Nogales, AZ 85621 Ajman North America: Europe: Middle East:Free Zone, UAE Tel: +39 02 93254.204 Tel: (520) 285-5130 Tel: +9Middle 716-7422494 Amphenol Industrial Operations Amphenol Industrial Operations Europe Amphenol East Enterprises FZE Fax: +39 02 93254.444 Fax: (520) 285-5134 +9PO 716-7422941 180 N. Freeport Drive, Plant 4 Via Barbaiana 5 OfficeFax: C-37 Box 21107 Email: tech@amphenol-aio.com Nogales, AZ 85621 Tel: (888) 364-9011 Fax: (520) 285-5134 Email: info@amphenol-aio.com 1-20020 Lainate (MI) Italy Tel: +39 02 93254.204 Fax: +39 02 93254.444 Ajman Free jhussain@amphenol-industrial.com Zone, UAE Email: Tel: +9 716-7422494 Fax: +9 716-7422941 Asia: Amphenol Technology Shenzhen Ltd Block 5 Fuan 2nd Industrial Park Dayang Rd, Fuyong Baoan Asia: Baoan, Shenzhen, China 518103 Amphenol Technology Tel: +86 755 2881 8389(Zhuhai) Co., Ltd. No. Xin755 Han Road, San Zao Town Fax:63 +86 2991 8310 Jin Wanenquiry@amphenol-aio.com District, Zhuhai City, China 519040 Email: Tel: +86 756-3989760 Fax: +86 756-3989768 Email: tech@amphenol-aio.com Email: info@amphenol-aio.com Email: jhussain@amphenol-industrial.com Email: enquiry@amphenol-aio.com