C10-729337-18P - AMPHENOL INDUSTRIAL

Amphenol®

www.amphenol-industrial.com

Tru-Loc® Splitter

Amphenol Industrial introduces a Splitter connector

complimentary to its Tru-Loc® family of products. The Tru-Loc®

Splitter is designed to take a single 6-Way Tru-Loc® Plug and

split the signal or power into two identical 6-Way Tru-Loc Plugs

without degradation or intermittency.

The Tru-Loc® Splitter features a molded thermoplastic body

resistant to many uids, including diesel fuel making this series

ideal for harsh environments. True to the series, the Tru-Loc®

Splitter is vibration resistant to 32 grms, IP67 rated and can

withstand operating temperatures up to 150°C. Amphenol’s

Splitter offers a means to combine many sensors into a

single Engine Control Unit. The Splitter effectively branches

a single six-circuit connector harness into two individual six-

circuit connector harnesses while maintaining a matched

impedance of 120 Ohms between the I/O power circuits and

CAN circuits. The greatest benet is being able to put both

Power and CAN into a single connector harness reducing the

number of connectors and harnesses produced by 2x for the

CAN application. Amphenol Industrial offers a 6-Way Plug

with contacts for either 16AWG or 20AWG wire and a 6-Way

Terminating Resistor Plug - tted with a 120 Ohm resistor for

use at the end of the bus.

Features:

• Ingress Protection – IP67 rated

• Gold Plated 1.5mm Pin Contacts

• Resilient up to 32 grms vibration

• Dielectric Withstanding Voltage – 1600 Vac RMS

• Matched Impedance 120 Ohms, 2 pairs

• Operating Temperature -40°C to 150°C

IDS-83

Amphenol Industrial Tru-Loc® Splitter for Harsh Environments

44.5

15 20

2.2

PRE-LOAD

POSITION

0.65

SOCKET

RECESS

5.46

10.92

For further information on your individual application requirements, contact: Amphenol Corporation

North America:

Amphenol Industrial Operations

180 N. Freeport Drive, Plant 4

Nogales, AZ 85621

Tel: (888) 364-9011

Fax: (520) 285-5134

Email: tech@amphenol-aio.com

Europe:

Amphenol Industrial Operations Europe

Via Barbaiana 5

1-20020 Lainate (MI) Italy

Tel: +39 02 93254.204

Fax: +39 02 93254.444

Email: info@amphenol-aio.com

Middle East:

Amphenol Middle East Enterprises FZE

Ofce C-37 PO Box 21107

Ajman Free Zone, UAE

Tel: +9 716-7422494

Fax: +9 716-7422941

Email: jhussain@amphenol-industrial.com

Asia:

Amphenol Technology (Zhuhai) Co., Ltd.

No. 63 Xin Han Road, San Zao Town

Jin Wan District, Zhuhai City, China 519040

Tel: +86 756-3989760

Fax: +86 756-3989768

Email: enquiry@amphenol-aio.com

Notice: Specifications are subject to change without notice. Contact your nearest Amphenol Corporation Sales Office for the latest specifications. All statements, information and data given herein are believed to be accurate and reliable but are presented

without guarantee, warranty, or responsibility of any kind, expressed or implied. Statements of suggestions concerning possible use of our products are made without representation or warranty that any such use is free of patent infringement and are not

recommendations to infringe any patent. The user should assume that all safety measures are indicated or that other measures may not be required. Specifications are typical and may not apply to all connectors.

* Socket Contacts are on reels of 4,200 pieces and pin contacts are on reels of 4000 pieces

* For Crimp Information please contact factory

* Cable seals are sold separately and must be used in all

cavities and on both sides of the connection system

For additional information on the Amphe-Power family of connectors with RADSOK®

Technology, please ask for our RADSOK® Catalog (SL-391) or download it from the Catalogs

section of our website.

Material Specification

Plug with RADSOK®Socket Contacts

Plug Body Nylon

Wire Seal Silicone

Main Joint Seal Fluoroelastomer

Socket Contact Copper Alloy w/ Stainless Steel Hood

Receptacle with Pin Contacts

Receptacle Body Nylon

Pin Contact Copper Alloy

Electrical Specifications

Dielectric Withstanding Voltage (Test Voltage) 1600 Vac RMS

Current Rating 13 amp (DC) (16 AWG Cable)

Insulation Resistance 100 M Ohms

AIPG Part Number Description Additional Information

10-838275-000 2way Plug (Plug Body, Locking Collar, and Main Joint Seal) 125°C

10-838275-002 2way Plug (Plug Body, Locking Collar, and Main Joint Seal) 150°C

10-707003-002 4way Plug (Plug Body, Locking Collar, and Main Joint Seal) 150°C

10-707508-02X(X: A,B,C,D) 6way Plug (Plug Body, Locking Collar, and Main Joint Seal) 4 indexes available, 150°C

10-707516-001 2way receptacle 150°C

10-707517-001 4way receptacle 150°C

10-707509-00X(X: A,B,C,D) 6way receptacle 4 indexes available, 150°C

10-838137-00D Wire seal (silicone) To be used with insulated wires

with insulation between 1.8-2.5 mm

10-838137-01D Wire seal (silicone) To be used with insulated wires

with insulation between 1.2-1.8 mm

10-730605-002 Stamped and formed female socket, Au+PdNi plating Crimps to wire from 0.8-1.3 sq. mm

10-707515-002 Stamped and formed male pin, Au+ PdNi plating Crimps to wire from 0.8-1.3 sq. mm

10-707515-0M2 Machined male pin, Au+PaNi plating Crimps to wire from 0.8-1.3 sq. mm

10-730179-002 Stamped and formed female socket, Au+PdNi plating Crimps to wire from 0.5-0.8 sq. mm

10-730764-002 Stamped and formed male pin, Au+ PdNi plating Crimps to wire from 0.5-0.8 sq. mm

C10-708354-000 Size 20 AWG hand crimp tool

C10-730690-000 Size 16-18 AWG hand crimp tool

Mechanical Specifications

Connector Mating Force <70 N (15.7 lb)

Contact Retention Primary Only: 80 N (18.0 lb)

Secondary Only: 60 N (13.5 lb)

Vibration 32 g RMS

Operating Temperature Range -40°/+125°C or +150°C depending on PN;

100 cycles, 1 hour per cycle

Ingress Protection IP67

Durability (Mating Cycle) 20 cycles

For further information on your individual application requirements, contact: Amphenol Corporation

North America:

Amphenol Industrial Operations

180 N. Freeport Drive, Plant 4

Nogales, AZ 85621

Tel: (520) 285-5130

Fax: (520) 285-5134

Email: tech@amphenol-aio.com

Europe:

Amphenol Industrial Operations Europe

Via Barbaiana 5

1-20020 Lainate (MI) Italy

Tel: +39 02 93254.204

Fax: +39 02 93254.444

Email: info@amphenol-aio.com

Middle East:

Amphenol Middle East Enterprises FZE

Office C-37 PO Box 21107

Ajman Free Zone, UAE

Tel: +9 716-7422494

Fax: +9 716-7422941

Email: jhussain@amphenol-industrial.com

Asia:

Amphenol Technology Shenzhen Ltd

Block 5 Fuan 2nd Industrial Park

Dayang Rd, Fuyong Baoan

Baoan, Shenzhen, China 518103

Tel: +86 755 2881 8389

Fax: +86 755 2991 8310

Email: enquiry@amphenol-aio.com

IDS-16-4 Tru-loc_10-23-14:Layout 1 1/16/15 11:25 AM Page 2

For additional information on Amphenol’s family of Tru-Loc products, please ask for our Tru-Loc data sheet (IDS-16) or

download it from our website in the Data Sheets section.

Plug

6 Way Tru-Loc Plug

Receptacle

Tru-Loc Splitter Receptacle for 6 Way Plugs

2.8

5.4

5.5

6 Places

1.3

6 Places

PORT 1

PORT 2 PORT 3

WIRE GROMMETS

120 Omh x 0.4

Watt Resister

Part Number Description

C10-708354-000

C10-708360-000

C10-708305-000

C10-708353-000

C10-729337-18P

Hand crimper with 20-22 AWG Die

6 Way Tru-Loc Dummy Plug

6 Way Tru-Loc Resistor Plug

6 Way Tru-Loc Plug, Gold Contacts for 20 AWG Wire

Tru-Loc Splitter Receptacle for 6 Way Plugs

6 Way Tru-Loc

Resistor Plug

(Dimensions are the

same as the standard

6 Way Tru-Loc Plug)

Ask about our custom matched impedance cable with 2 sets of

20AWG twisted pairs, each rated for 120 Ohms impedance.