46 PRODUCT CATALOGUE - STEGOREGULATING
TECHNICAL DATA
Switch temperature difference 7K (±4K tolerance)
Sensor element thermostatic bimetal
Contact type snap-action contact
Service life > 100,000 cycles
Max. switching capacity 250VAC, 10 (2) A
120VAC, 15 (2) A
DC 30W at 24VDC to 72VDC
Max. inrush current AC 16A for 10 sec.
Connection¹
2-pole terminal, clamping torque 0.5Nm max.: rigid wire 2.5mm²,
stranded wire (with wire end ferrule) 1.5mm²
Mounting clip for 35mm DIN rail, EN 60715
Casing plastic according to UL94 V-0, light grey
Dimensions 60 x 33 x 43mm
Weight approx. 40g
Fitting position variable
Operating/Storage temperature -45 to +80°C (-49 to +176°F)
Operating/Storage humidity max. 95% RH (non-condensing)
Protection type IP20
¹ When connecting with wires, wire end ferrules must be used.
Important note: The contact system of the regulator is subjected to environmental influences, thus the contact resistance may
change. This can lead to a voltage drop and/or self-heating of the contacts.
KTO 011: Thermostat (normally closed); contact breaker for regulating heaters. The contact opens when tempe
rature
is rising.
KTS 011: Thermostat (normally open); contact maker for regulating of filter fans and heat exchangers or for swit
ching
signal devises when temperature limit has been exceeded. The contact closes when temperature is rising.
> Large setting range
> Small size
> Simple to mount
> High switching performance
Connection diagrams
Thermostat
KTO 011 (NC)
Thermostat
KTS 011 (NO)
Examples of
connection
e.g. Signal deviceThermostat
KTS 011 (NO)
e.g. FanThermostat
KTS 011 (NO)
HeaterThermostat
KTO 011 (NC)
Heater
Filter fan, Cooling equipment, Signal device
SMALL COMPACT THERMOSTAT
KTO 011 / KTS 011
Setting range Art. No. Contact breaker (NC) Art. No. Contact maker (NO) Approvals
0 to +60°C 01140.0-00 01141.0-00 VDE
-10 to +50°C 01142.0-00 01143.0-00 VDE + UL File No. E164102
+20 to +80°C 01159.0-00 01158.0-00 VDE + UL File No. E164102
+32 to +140°F 01140.9-00 01141.9-00 VDE + UL File No. E164102
+14 to +122°F 01142.9-00 01143.9-00 VDE + UL File No. E164102
0 to +60°C 01146.9-00 01147.9-00 VDE + UL File No. E164102
TECHNICAL DATASHEET
20.03.2013 | Specifications are subject to change without notice. Errors and omissions excepted. Suitability of this product for its intended use and any associated risks must be determined by the end customer/buyer in its final application. www.stego.de | www.stego.co.uk | www.stegonorden.se