F-1www.hubbell-wiring.com Wiring Device-Kellems
®
Section F
Switched Disconnects and Enclosures
Hazardous Locations
NEMA 1, 3/3R and 4X
Disconnect Switches
Index
Product Page
Summary .....................................................F-2
Ratings Quick Reference Guide ..................................F-3
Labelless Circuit-Lock® Unfused Disconnect Switches
30, 60 and 100 Amp Units ....................................F-5
Accessories and Replacement Parts ............................F-6
Dimensions and Specifications .................................F-7
MotorQuick® Disconnect Switches
Cost of Ownership Analysis ...................................F-8
Labelless Disconnect Switches and Accessories ..................F-9
Dimensions and Specifications ................................F-10
Circuit-Lock® Fused Disconnect Switches
30 and 60 Amp Units ........................................F-12
Horsepower Ratings and Specifications .........................F-13
Hazardous Locations
Unfused Disconnect Switches ................................F-15
AC Manual Toggle Controllers/Disconnects
600V AC Manual Motor Controllers/Disconnects ..................F-17
NEMA 1 Disconnect Switches ...................................F-18
NEMA 3/3R and 3R Disconnect Switches .........................F-19
30 Ampere, 600 Volts AC Manual Motor Controllers ................F-20
40, 50, 60 and 85 Ampere, 600 Volts AC Manual Motor Controllers ....F-21
NEMA 4X Disconnect Switches .................................F-22
Pendant Pushbutton Stations
CPB2 and PBS Series .......................................F-23
Accessories and Replacement Parts ...........................F-24
Fused Disconnects,
MotorQuick® and VFDs
Circuit-Lock® Unfused
Disconnect Switches
www.hubbell-wiring.comF-2 Wiring Device-Kellems
®
Hubbell
Safety
Safety of personnel and
equipment is paramount
in any manufacturing
environment. Hubbell
Circuit-Lock® motor
controllers withstand
short circuits and provide
a high degree of safety
across the factory floor.
Disconnect Switches for
Variable Frequency Drives
(VFDs) safely terminate
power to prevent risk of
injury and damage to high-
performance output devices
used for controlling today’s
conveyor systems.
Hubbell
Flexibility
With Hubbell’s wide range
of Circuit-Lock® motor
controllers and disconnects
that offer several mounting
options, NEC® line of sight
requirements are easily
achieved at the equipment
or on the wall in virtually
any industrial environment.
Switches with a compact
footprint, a variety of
NEMA® type enclosures
and plug-and-play
LINKOSITY® make switch
placement easier and
more flexible than ever.
Hubbell
Compliance
Compliance with codes
and regulations is a must in
any industrial environment.
Hubbell motor controllers
meet a variety of
requirements, including
OSHA lockout/tagout,
NSF certification for
hygiene and hazardous
location ratings. Each
Circuit-Lock® motor
controller is UL listed
as “Suitable as Motor
Disconnect”. The NEC®
allows for the disconnect
and controller to be in
one unit.
Hubbell
Productivity
Circuit-Lock® keeps assembly
lines, goods and services
moving. By offering a dual
motor controller-disconnect
rating, power can be safely
terminated at any point in the
circuit to perform maintenance
on a single motor without
shutting down the entire
line. With the plug-and-play
LINKOSITY® power system,
MotorQuick® reduces motor
change-out time by more than
65% to get equipment up and
running faster.
Hubbell’s Circuit-Lock® Manual Motor Controllers
"Suitable as Motor Disconnects"
Hubbell manufactures one of the most complete lines of motor disconnects on the market. Designed to ensure maximum
reliability and performance, Hubbell Circuit-Lock® motor controllers meet or exceed all industry requirements. Because our
Circuit-Lock® motor controllers are also disconnects, they ensure safety, compliance, flexibility and productivity for today’s
industrial and commercial environments. Whether controlling motor loads, safely terminating power or isolating equipment,
Hubbell has the solution for you—no matter what the environment or application.
NEC® is a registered trademark of the National Fire Protection Association (NFPA).
NEMA® is a registered trademark of the National Electrical Manufacturers Association.
Variable Frequency Disconnects Each Controller is Also a Disconnect
F-3www.hubbell-wiring.com Wiring Device-Kellems
®
Switched Disconnects and Enclosures
Hubbell Manual Motor Controllers and Disconnects
"Suitable as Motor Disconnects"
HBL7810D HBL7853D
HBL7863DHBL7862D
HBL16R93DHBLDS3
FDS30HBL13S33D
HBL13R89DHBL1379D
HBLDS3MQ5
HBLDS3MQR
Ratings Quick Reference Guide
Circuit-Lock
® Switched Enclosures
HP
Amp Description Phase Poles 120 240 480 600 Catalog Number
30 TYPE 1 Non-Metallic
TYPE 1 Non-Metallic
TYPE 1 Non-Metallic
3
3
3
3
3
3
3
3
3
7.5
7.5
7.5
15
15
15
20
20
20
HBL1389MQR
HBL1389MQ5
HBL1389MQR2
NEMA 1 Aluminum
NEMA 1 Aluminum
NEMA 1 Non-Metallic
NEMA 1 Non-Metallic
1
3
1
3
2
3
2
3
2
3
2
3
5
7.5
5
7.5
10
15
10
15
15
20
15
20
HBL1372D
HBL1379D
HBL1392D
HBL1389D
NEMA 3/3R Non-Metallic
NEMA 3/3R Non-Metallic
1
3
2
3
2
3
5
7.5
10
15
15
20
HBL13R22D
HBL13R23D
NEMA 3R Die Cast Aluminum
NEMA 3R Die Cast Aluminum
NEMA 3R Aluminum
NEMA 3R Aluminum
1
3
1
3
2
3
2
3
2
3
2
3
5
7.5
5
7.5
10
15
10
15
15
20
15
20
HBL13R12D
HBL13R13D
HBL13R92D
HBL13R89D
IP69k TYPE 4X Labelless Non-Metallic
IP69k TYPE 4X Labelless Non-Metallic
IP69k TYPE 4X Labelless Non-Metallic
IP69k TYPE 4X Labelless Non-Metallic
IP69k TYPE 4X Labelless Non-Metallic
IP69k TYPE 4X Labelless Non-Metallic
TYPE 4X Labelless Non-Metallic
TYPE 4X Labelless Non-Metallic
TYPE 4X Labelless Non-Metallic
IP69k TYPE 4X Stainless Steel
IP69k TYPE 4X Stainless Steel
IP69k TYPE 4X Stainless Steel
TYPE 4X Stainless Steel
TYPE 4X Stainless Steel
TYPE 4X Non-Metallic Fused Disconnect
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
1
1
1
1
1
1
1
1
1
1
1
1
2
1
1
7.5
7.5
7.5
7.5
7.5
5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
15
15
15
15
15
10
15
15
15
15
15
15
15
15
15
15
15
15
15
15
10
15
15
15
15
15
15
15
15
20
HBLDS3
HBLDS3AC
HBLDS3AC2
HBLDS3NK
HBLDS3ACNK
HBLDS33ACNK
HBLDS3MQR
HBLDS3MQ5
HBLDS3MQR2
HBLDS3SS
HBLDS3SSAC
HBLDS3SSVFD
HBLDS3SSMQR
HBLDS3SSMQ5
FDS30
NEMA 4X Stainless Steel
NEMA 4X Non-Metallic
3
3
3
3
3
3
7.5
7.5
15
15
20
20
HBL13S33D
HBL13X33D
60 NEMA 3R Aluminum
NEMA 3R Aluminum
1
3
2
3
—
—
10
10
15
25
20
30
HBL16R92D
HBL16R93D
IP69k TYPE 4X Non-Metallic
IP69k TYPE 4X Non-Metallic
IP69k TYPE 4X Stainless Steel
IP69k TYPE 4X Stainless Steel
TYPE 4X Non-Metallic Fused Disconnect
3
3
3
3
3
3
3
3
3
3
7.5
7.5
7.5
7.5
3
30
30
30
30
15
50
50
50
50
30
50
50
50
50
40
HBLDS6
HBLDS6AC
HBLDS6SS
HBLDS6SSAC
FDS60
NEMA 4X Stainless Steel
NEMA 4X Non-Metallic
3
3
3
3
—
—
10
10
25
25
30
30
HBL16S63D
HBL16X63D
100 IP69k TYPE 4X Non-Metallic
IP69k TYPE 4X Non-Metallic
IP69k TYPE 4X Stainless Steel
IP69k TYPE 4X Stainless Steel
3
3
3
3
3
3
3
3
7.5
7.5
7.5
7.5
30
30
30
30
50
50
50
50
50
50
50
50
HBLDS10
HBLDS10AC
HBLDS10SS
HBLDS10SSAC
Circuit-Lock
® Switches
HP
Amp Description Phase Poles 120 240 480 600 Catalog Number
30 Toggle Switch
Short Toggle Switch
Toggle Switch, Bulk Pack
Toggle Switch
Short Toggle Switch
1
1
1
3
3
2
2
2
3
3
2
2
2
3
3
5
5
5
7.5
7.5
10
10
10
15
15
15
15
15
20
20
HBL7832D
HBL7832DS
HBL7832DX
HBL7810D
HBL7810DS
40 Toggle Switch
Toggle Switch
1
3
2
3
2
3
5
7.5
10
15
15
20
HBL7842D
HBL7843D
50 Toggle Switch
Toggle Switch
1
3
2
3
2
3
5
7.5
10
15
15
25
HBL7852D
HBL7853D
—Finger guard (30–50A Switches) ————— —HBLFG30
60 Toggle Switch
Toggle Switch
Toggle Switch – Front Wire
Toggle Switch – Front Wire
1
3
1
3
2
3
2
3
—
—
—
—
10
10
10
10
15
25
15
25
20
30
20
30
HBL7862D
HBL7863D
HBL7862FWD
HBL7863FWD
85 Toggle Switch
Toggle Switch
1
3
2
3
—
—
10
10
15
25
20
40
HBL7882D
HBL7883D
HBLDS3SS HBLDS3SSR
www.hubbell-wiring.comF-4 Wiring Device-Kellems
®
Switched Disconnects and Enclosures
Circuit-Lock® Unfused Disconnect Switches
Features and Benefits
Labelless Circuit-Lock® 30, 60, and 100 Ampere Unfused Disconnect Switches
NEC section 430.102(B) requires each motor controller to have a disconnect within line of sight from the motor and driven equipment.
NEC section 430.109(A)(6) recognizes that a manual motor controller and disconnect can be the same unit, provided it has been tested
for this purpose. Hubbell’s Circuit-Lock® Unfused Disconnect Switches are UL listed as a manual motor controller and also “suitable as a
motor disconnect” and meet these code requirements. In addition, the enclosure offers the ability to lock directly wired motor loads in the
OFF position to comply with OSHA Lockout/Tagout regulations. This safety enclosure is Type 4X (Wash down, Corrosion resistant) IP69k
and is also suitable for use with metallic conduit. The switch is mounted on an internal frame that is integral with the enclosure and bonds
all grounds, and it accepts auxiliary contacts that can be used to signal PLC controllers.
Conduit hub and adjustable
mounting feet are supplied for
ease of installation.
Labelless Circuit-Lock® Unfused Disconnect
Switches are available in 30, 60 and 100 Amp,
600V AC ratings.
Auxiliary contacts are available
for control circuit applications
including the ON/OFF control
of pilot lights or signal for
programmable controllers.
Stainless steel
hardware
for corrosion
resistance
Internal frame
automatically
bonds all grounds
High visibility red
handle can be locked
in the OFF position
as a method of
compliance with
OSHA Lockout/
Tagout requirements Captured
neoprene gasket
provides a
watertight seal
between cover
and base
Reversible interior
accommodates
top or bottom
conduit opening
Type 4X, 12 and IP69k enclosure is
molded of rugged Valox® to resist
abuse, corrosion and enhance safety HBLDS3
Three molded-in
conduit drill points
are located on the
top, bottom, and
back surface of
enclosure
Molded-in conduit opening
and field installed hub
Product ratings are laser-marked
into the device and will not wash
off for permanent identification
Valox® is a trademark of SABIC Innovative Plastics, acquired from General Electric Company.
IP69k
IP69k
F-5www.hubbell-wiring.com Wiring Device-Kellems
®
Switched Disconnects and Enclosures
Circuit-Lock® Unfused Disconnect Switches
“Suitable as Motor Disconnects”
HBLDS3SS
Labelless Circuit-Lock® Unfused Disconnect Switches in Non-Metallic Enclosures*
Description 30 Amp 60 Amp 100 Amp
Labelless disconnect switch. HBLDS3 HBLDS6 HBLDS10
Labelless disconnect switch for use with variable
frequency drives.
HBLDS3VFD HBLDS6VFD HBLDS10VFD
Labelless disconnect switch with HBLAC1
auxuliary contact.
HBLDS3AC HBLDS6AC HBLDS10AC
Labelless disconnect switch with HBLAC2
auxuliary contact.
HBLDS3AC2 — —
Labelless disconnect switch without conduit
knockout or conduit fitting.
HBLDS3NK — —
Labelless disconnect switch with HBLAC1 auxuliary
contact without conduit knockout or conduit fitting.
HBLDS3ACNK — —
Labelless disconnect
switch with 3 auxuliary contacts,
without conduit knockouts. Break before main break – 1 set
“normally open”, 1 set “normally closed”. Break after main
break – 2 sets “normally open”, 1 set “normally closed”.
HBLDS33ACNK — —
Circuit-Lock® Unfused Disconnect Switches in Stainless Steel Enclosures*
Description 30 Amp 60 Amp 100 Amp
Square Top disconnect switch. HBLDS3SS HBLDS6SS HBLDS10SS
Square Top disconnect switch for use with variable
frequency drives.
HBLDS3SSVFD HBLDS6SSVFD HBLDS10SSVFD
Square Top disconnect switch with HBLAC1
auxuliary contact.
HBLDS3SSAC HBLDS6SSAC HBLDS10SSAC
Sloped Top disconnect switch. HBLDS3SSR HBLDS6SSR HBLDS10SSR
Sloped Top disconnect switch for use with variable
frequency drives.
HBLDS3SSRVFD HBLDS6SSRVFD HBLDS10SSRVFD
Sloped Top disconnect switch with HBLAC1
auxuliary contact.
HBLDS3SSRAC HBLDS6SSRAC HBLDS10SSRAC
Auxiliary Contacts for 30, 60 and 100 Amp Switch, NEMA A600 Pilot Duty
Description Catalog Number
“Break After Main Break”, 1 set of n/o contacts,
1 set of n/c contacts.
HBLAC1**
“Break Before Main Break”, 1 set of n/o contacts. HBLAC2**
Note: *Certified by NSF, International.
**Up to two auxiliary contacts per enclosure. Not for use with HBLDS33ACNK.
30A Units are supplied with one ¾ in. NPT Raintight conduit fitting.
60A and 100A Units are supplied with two 1¼ in. NPT Raintight conduit fittings.
HBLAC2
HBLAC1
UL Listed, CSA Certied
TYPE 4, 4X and
12 Enclosure Rating
HBLDS3AC
Variable Frequency Drive Diagram
HBLDS3SSR
IP69k
www.hubbell-wiring.comF-6 Wiring Device-Kellems
®
Switched Disconnects and Enclosures
Circuit-Lock® Unfused Disconnect Switches
“Suitable as Motor Disconnects”
Labelless Replacement Covers
Description 30 Amp 60 Amp 100 Amp
For non-metallic switches. HBLDS3RC HBLDS6RC HBLDS10RC
For square top stainless steel switches. HBLDS3SSRC HBLDS6SSRC HBLDS10SSRC
For sloped top stainless steel switches. HBLD3SSRRC HBLD60100SSRRC HBLD60100SSRRC
Replacement Ground Block
Description Catalog Number
For 30A switches. HBL30RGB
For 60A and 100A switches. HBL60100RGB
Replacement Neutral Block
Description Catalog Number
For 30A switches. HBL30RNB
For 60A switches. HBL60RNB
For 100A switches. HBL100RNB
Replacement Switches
Description Catalog Number
For 30A switches. HBLDS3RS
For 60A and 100A switches. HBLDS60100RS
For HBLDS33ACNK. HBLDS33ACRS
Replacement Mounting Feet
Description Catalog Number
For 30A non-metallic switches. HBLRFT1∆
For 60A and 100A non-metallic switches. HBLRFT2∆
Note: ∆ Package of 10 feet and 10 screws.
HBLRFT1
HBLDS3RC
HBLD3SSRRC
HBLDS3RS
IP66
SUITABILITY
HBL30RGB
HBL30RNB
HBLDS3SSRC
F-7www.hubbell-wiring.com Wiring Device-Kellems
®
Circuit-Lock® Unfused Disconnect Switches
Specifications
Moisture Resistance Indoor and Outdoor – Type 4X (Wash down, Corrosion resistant);
Indoor – 30, 60A and 100A Type 12 (Dust-tight, Falling Dirt, Noncorrosive Liquids).
Flammability UL94-5VA and V0 Classification.
Operating Temperature Maximum Continuous 75°C; Minimum Continuous -40°C without impact.
UV Resistance All materials are UV stabilized.
Dielectric Voltage Withstands 3000V AC minimum.
Max. Working Voltage 600V AC RMS.
Current Interrupting Certified for current interrupting at full rated current and voltage.
Short Circuit Current Ratings (SCCR): • 30/60/100A: Suitable for use on a circuit capable of delivering not more than 10kA RMS
(Motor Disconnect) symmetrical, 600V AC max.
• 30A: Suitable for use on a circuit capable of delivering not more than 65kA RMS symmetrical,
600V AC max. when protected by Class J fuses rated 30A max.
• 60/100A: Suitable for use on a circuit capable of delivering not more than 65kA RMS symmetrical,
600V AC max. when protected by Class J fuses rated 100A max.
Terminal Identification In accordance with UL, CSA and international conventions.
Product Identification Identification and ratings are part of external label.
Mounting Non-Metallic - External fully adjustable feet. Stainless Steel - Feet are fixed.
Impact Resistance In accordance with UL 746C.
Materials
Part Non-Metallic Stainless Steel
Base Valox® #14 Gauge Type 304 Stainless Steel
Top Valox® #14 Gauge Type 304 Stainless Steel
Handle Valox® Valox®
Conduit Hub Zinc 30A Unfused - ¾ in. Zinc 30A - ¾ in.
Zinc 60/100A Unfused - 1¼ in. Zinc 60/100A - 1¼ in.
Enclosure Gasket Neoprene Neoprene
Shaft (Unfused) Valox® Valox®
Shaft Seal Molded Neoprene Molded Neoprene
Frame Galvanized Steel N/A
Enclosure Screws Stainless Steel 300 Series Stainless Steel
Switched Disconnects and Enclosures
Circuit-Lock® Unfused Disconnect Switches
Dimensions and Specifications
Horsepower Ratings
Voltage 30A 30A* 60A 100A
1Ø 120V AC 1 1 7.5 7.5
1Ø 200–240V AC 3 2.5 15 15
1Ø 480V AC 5 5 30 30
3Ø 200–240V AC 7.5 530 30
3Ø 480V AC 15 10 50 50
3Ø 600V AC 15 10 50 50
Note: *HBLDS33ACNK.
Dimensions
Key
Labelless Non-Metallic Stainless Steel, Square Top Stainless Steel, Sloped Top
30A 60A/100A 30A 60A/100A 30A 60A/100A
inch (mm) inch (mm) inch (mm) inch (mm) inch (mm) inch (mm)
A6.00 (152) 7.75 (197) — — — —
B5.12 (130) 6.87 (175) 4.87 (124) 7. 3 0 (185) 5.41 (137) 7. 6 6 (195)
C4.12 (105) 4.75 (121) 3.30 (84) 5.50 (140) 4.50 (114) 6.45 (164)
D6.62 (168) 8.00 (203) — — — —
E7.6 2 (194) 9.95 (253) 7. 0 5 (179) 10.30 (262) 8.60 (218) 11.41 (290)
F8.50 (216) 11.00 (279) 8.38 (213) 11.63 (296) 8.22 (209) 11.17 (284)
G4.12 (105) 5.94 (151) 5.39 (137) 5.93 (151) 4.92 (125) 6.10 (155)
Valox® is a trademark of SABIC Innovative Plastics, acquired from General Electric Company. Dimensions in Inches (mm)
Non-Metallic Stainless Steel, Square Top Stainless Steel, Sloped Top
www.hubbell-wiring.comF-8 Wiring Device-Kellems
®
MotorQuick® significantly reduces the time it takes
to replace motors by combining the plug-and-play
technology of the LINKOSITY® power system with the
versatility of Circuit-Lock® motor disconnect switches.
Quick disconnect terminations will reduce motor change-
out time by aproximately 65%. Keeping spare motors
already pre-wired with a LINKOSITY® inlet enables wiring
to be done off-line when it is convenient, not critical.
Motor rotation can be pre-checked in a maintenance
shop to further speed the installation. The net result is
that equipment is up and running in a fraction of the time,
helping improve the bottom line.
MotorQuick® Motor Changeout
Catalog Number
Total
Material Cost
Labor
Cost/ Hr Downtime
Total Labor
Cost
Downtime
Cost/hr
Total
Downtime
Cost Total Cost Total Savings
HBL1389MQ*
HBLDS3MQ*
$299.00
$411.00
$53.00
$53.00
20 minutes
20 minutes
$17.67
$17.67
$750.00
$750.00
$250.00
$250.00
$566.67
$678.67
$342.33
$309.33
Note: *MotorQuick catalog numbers are based on the average cost of the various designs.
MotorQuick® Cost of Ownership Analysis
Traditional Motor Changeout
Catalog Number
Total
Material Cost
Labor
Cost/ Hr Downtime
Total Labor
Cost
Downtime
Cost/hr
Total
Downtime
Cost Total Cost
HBL1389D
HBLDS3
$106.00
$185.00
$53.00
$53.00
1 hour
1 hour
$53.00
$53.00
$750.00
$750.00
$750.00
$750.00
$909.00
$988.00
Switched Disconnects and Enclosures
Hubbell’s MotorQuick®
Plug and Play Technology
F-9www.hubbell-wiring.com Wiring Device-Kellems
®
HBL1389MQR2
HBLDS3MQR
PH2030C
30 Ampere, 600 Volts AC
MotorQuick® Disconnect Switches
Type 1 Non-Metallic Enclosure 30A 3 Pole 600V AC Catalog Number
HBL1389D with one pre-wired LINKOSITY® female receptacle (load side). HBL13 8 9MQR
HBL1389D with 5 foot pre-wired LINKOSITY® female cable (load side). HBL13 8 9 MQ 5
HBL1389D with one pre-wired LINKOSITY® male receptacle (line side)
and one pre-wired LINKOSITY® female receptacle (load side).
HBL13 8 9MQR2
Type 4X Non-Metallic Labelless Enclosure 30A 3 Pole 600V AC
HBLDS3 with one pre-wired LINKOSITY® female receptacle (load side). HBLDS3MQR
HBLDS3 with 5 foot pre-wired LINKOSITY® female cable (load side). HBLDS3MQ5
HBLDS3 with one pre-wired LINKOSITY® male receptacle (line side)
and one pre-wired LINKOSITY® female receptacle (load side).
HBLDS3MQR2
Type 4X Stainless Steel Enclosure 30A 3 Pole 600V AC Sloped Top Square Top
HBLDS3SS with one pre-wired LINKOSITY® female receptacle (load side). HBLDS3SSRMQR HBLDS3SSMQR
HBLDS3SS with 5 foot pre-wired LINKOSITY® female cable (load side). HBLDS3SSRMQ5 HBLDS3SSMQ5
HBLDS3SS with one pre-wired LINKOSITY® male receptacle (line side)
and one pre-wired LINKOSITY® female receptacle (load side).
HBLDS3SSRMQR2 HBLDS3SSMQR2
Accessories
Description Catalog Number
3P 4W LINKOSITY® male receptacle for installation on motor. RM3004PA001
3P 4W LINKOSITY® female receptacle for installation in switch. RF3004PA001
3P 4W LINKOSITY® double ended (male/female) 5-50 foot cable. PH3004PAxxx*
3P 4W LINKOSITY® single ended (female) 5-50 foot cable. PF3004PAxxx*
Cord connector, ¾ in. NPT .63–.75 in. (16.0–19.1) diameter. SHC1037CR
Lock-on cover for LINKOSITY® connections. PH2030C
Note: *Cables available from 5-50 feet in 5 foot increments. To purchase larger cable, replace the XXX with the required
length in feet. (Examples: PH3004PA005 = 5 foot cable, PH3004PA050 = 50 foot cable.)
Sample Set Up
(1) HBLDS3MQR + (1) PH3004PAxxx + (1) RM3004PA001 = Total Set Up**
Note: ** Retrofit parts available for pre-existing disconnect switch installations.
Please consult factory for availability.
Valox® is a trademark of SABIC Innovative Plastics, acquired from General Electric Company.
Crush and Impact
Resistance of
MC Cable
Cable Ratings:
TC-ER, MTW, STOOW
Thermoplastic Cover
on Plated Steel Base
NEMA 1 Enclosure
Pre-wired with
LINKOSITY®
Components
Lockable Handle to
Meet OSHA Lockout/
Tagout Regulations
Type 4X Enclosure
Permanent Labelless
Marking
High Impact Valox®
Enclosure
HBL13 8 9MQ5
HBLDS3MQ5
+ + =
HBLDS3SSRMQR
HBLDS3SSMQR
HBLDS3SSRMQR
IP67
SUITABILITY
www.hubbell-wiring.comF-10 Wiring Device-Kellems
®
3.40"
(86.36)
4.52"
(114.81)
3.97"
(100.84)
.88"
(22.35)
ON
OFF
4.12"
(105)
Female
LINKOSITY Cord
(MQ5 Option)
Female
LINKOSITY Cord
(MQ5 Option)
Female
LINKOSITY
Receptacle
Male
LINKOSITY
Receptacle
(MQR2 Option)
Female
LINKOSITY
Receptacle
Male
LINKOSITY
Receptacle
(MQR2 Option)
6.00" (152)
5.12" (130)
4.12"
(105)
6.62"
(168)
7.62"
(194)
8.50"
(216)
HP Rating
120V AC 3
240V AC 7.5
480V AC 15
600V AC 20
HP Rating
120V AC 1
240V AC 7.5
480V AC 15
600V AC 15
30 Ampere, 600 Volts AC
Certifications
Connecting Components Listed to UL 2238 and UL 50E.
Electrical Performance
Voltage Up to 600V AC.
Amperage Up to 30A.
Environmental
Connectivity System Components
Moisture Resistance UL Type 4, 4X, 12 and 13.
Ingress Protection IP67 Suitability.
Flammability UL94HB cables / UL94V-0 receptacles.
Materials
Connectivity System Components
Contact Carrier Nylon 6/6, white.
Contact Materials Pins - brass.
Sockets - leaded nickel copper
w/ stainless steel sleeve.
Contact Plating Hard gold over palladium/nickel.
Overmold Material Glass filled polyurethane, gray.
Coupling Hardware Nickel plated brass.
Cable (16 AWG and Up) UL 600V Type TC-ER, MTW 90°C
or STOOW 600V 105°C.
LINKOSITY® Connection
Specications Type 1 Type 4X
Electrical Performance
Dielectric Voltage 2,200V AC minimum for 1 minute. 2,200V AC minimum for 1 minute.
Electrical Life
6,000 cycles with load. 6,000 cycles with load.
Max. Working Voltage 600V AC RMS.
600V AC RMS.
Short Circuit Current Ratings (SCCR):
(Motor Disconnect)
10,000 RMS symmetrical amps when tested
with 60A max J fuses.
• 30: Suitable for use on a circuit capable of delivering not more
than 10kA RMS symmetrical, 600V AC max.
• 30A: Suitable for use on a circuit capable of delivering not more
than 65kA RMS symmetrical, 600V AC max. when protected by
Class J fuses rated 30A max.
Short Circuit Current Ratings (SCCR):
(
Motor Controller)
10,000 RMS symmetrical amps when tested
with 125A
RK5 fuses.
Mechanical
Mechanical Life
10,000 minimum cycles. 10,000 minimum cycles.
Terminal Accommodations
Amps AWG Min. AWG Max. Amps AWG Min. AWG Max.
30 #14 #10 30 #14 #10
Terminal Torque 30
20 inch pounds
30
20 inch pounds
Impact Resistance
— — —
UL74 6C
Environmental
Flammability UL94HB/V-0.
UL94-5VA and V0 Classification.
Operating Temp. Max. continuous 60°C
Max. continuous 75°C
Min. continuous w/o impact -40°C
Min. continuous -40°C
Listings
UL 508
Industrial Control Equipment File #E36355
Industrial Control Equipment File #E36355
Dimensions Type 1 Type 4X
Dimensions in Inches (mm)
F-11www.hubbell-wiring.com Wiring Device-Kellems
®
Circuit-Lock® 30 and 60 Ampere Fused Disconnect Switches
The Circuit-Lock Fused Disconnect Switch provides fused switched control of a directly wired load. The switch cannot
be turned ON unless the enclosure cover is closed. The fuses cannot be accessed until the switch is turned OFF. The
fuse holder accepts Class “J” fuses. This enclosure is non-metallic and is listed for Outdoor/Indoor (Type 4X Wash down,
Corrosion resistant). The handle can be locked in the OFF position to comply with OSHA Lockout/Tagout regulations.
Compact Fused Disconnect Switch
accepts Class “J” fuses. Fuse holders
are top mounted for easy access. The
switch accepts auxiliary contacts for
control circuit applications including
the ON/OFF control of remote pilot
lights or signal for programmable
controllers.
Stainless steel ¼ inch turn
door fasteners for quick,
easy access to fuses.
Enclosure door can be locked
to prevent unauthorized
access. Additionally, if the
switch is ON, the door cannot
be opened.
Switched Disconnects and Enclosures
Circuit-Lock® Fused Disconnect Switches “Suitable as Motor Disconnects”
Features and Benefits
Conduit hub and adjustable
mounting feet are supplied
with each Circuit-Lock®
Fused Disconnect Switch.
Lockable high
visibility red handle
to meet OSHA
Lockout/Tagout
Safety interlocked
fuse access door
Fused disconnect
switches accept
Class “J” fuses
Stainless steel
hardware
for corrosion
resistance
Removable door
for ease of wiring
and installation
Non-metallic enclosure
meets UL 50E Type 4X
(watertight) 12 (dust-tight)
and IP66 suitability
requirements. Enclosure is
molded of rugged Valox®
to resist abuse, corrosion
and enhance safety.
All external hardware
is stainless steel
Adjustable mounting
feet (4) can be
mounted in any of
three positions for
ease of installation
Three molded-in conduit drill points are
located on the top, bottom, and back
surface of enclosure. Conduit hub provided:
30A 1 inch NPT, 60A 1¼ inch NPT
FDS30
Valox® is a trademark of SABIC Innovative Plastics, acquired from General Electric Company.
www.hubbell-wiring.comF-12 Wiring Device-Kellems
®
15.03"
(381.8)
7.27"
(184.7)
8.43"
(214.1)
15.36"
(390.1)
14.48"
(367.8)
12.37"
(314.2)
3.60"
(91.4)
7.19"
(182.6)
9.31"
(236.5)
10.18"
(258.6)
11.46"
(291.6)
Dimensions
Switched Disconnects and Enclosures
Circuit-Lock® Fused Disconnect Switches “Suitable as Motor Disconnects”
Dimensions
HBLRFT2
FDS30
MICPK30
UL Listed, CSA Certied
TYPE 4, 4X and
12 Enclosure Rating
IP66
SUITABILITY
Dimensions in Inches (mm)
30 and 60 Amp Fused Disconnect Switches
Description Catalog Number
30A Circuit-Lock fused disconnect switch. FDS30*
60A Circuit-Lock fused disconnect switch. FDS60*
Note: *Class “J” fuses not included.
Auxiliary Contacts
Description
Black Style Switch
Catalog Number
Gray Style Switch
Catalog Number
Auxiliary contact, normally open, A600 pilot duty, break before break. ACFSNO HBLACFSNO
Auxiliary contact, normally closed, A600 pilot duty, break before break. ACFSNC HBLACFSNC
Note: Auxiliary contacts are specific to the style switch noted and are NOT interchangeble.
Replacement Switches
Description
Black Style Switch
Catalog Number
Gray Style Switch
Catalog Number
For 30A fused switches. 30MIFRS HBL30MIFRS
For 60A fused switches. Gray Style switch will retro fit Black Style switch. —HBL60MIFRS
Note: If replacing a Black Style switch, you must use the 30MIFRS. All other applications can use the Gray Style switch.
Watertight Closure Plug Kits
Description Catalog Number
For 30A Circuit-Lock® unfused and fused Pin and Sleeve mechanical interlocks. MICPK30
For 60 and 100A Circuit-Lock® unfused and fused Pin and Sleeve mechanical interlocks. MICPK60
Replacement Mounting Feet
Description Catalog Number
Replacement mounting feet and screws for 30 and 60A fused mechanical interlocks. HBLRFT2∆
Note: 30A Units supplied with two 1 in. NPT raintight conduit fittings.
60A Units supplied with two 1¼ in. NPT raintight conduit fittings.
∆ Package of 10 feet and 10 screws.
HBL30MIFRSHBLACFSNO
Gray Style Switch
ACFSNO 30MIFRS
Black Style Switch
F-13www.hubbell-wiring.com Wiring Device-Kellems
®
Horsepower Ratings
Ratings Volts Standard HP Maximum HP*Catalog Number
30A
600V AC
Max.
120V AC
208-240V AC
3Ø 240V AC
3Ø 480V AC
3Ø 600V AC
3Ø Y 120/208V AC
3Ø Y 277/480V AC
3Ø Y 347/600V AC
0.5
1.5
3
5
7.5
3
5
7.5
2
3
7.5
15
20
5
15
20
FDS30
60A
600V AC
Max.
120V AC
208-240V AC
3Ø 240V AC
3Ø 480V AC
3Ø 600V AC
3Ø Y 120/208V AC
3Ø Y 277/480V AC
3Ø Y 347/600V AC
1.5
3
7.5
15
15
7.5
15
15
3
7.5
15
30
50
15
30
40
FDS60
Note: *Requires time delay fuses.
Switched Disconnects and Enclosures
Circuit-Lock® Fused Disconnect Switches
Horsepower Ratings and Specifications
Fuse and Short Circuit Information
Horsepower Ratings The starting current of motors of more than the standard horsepower rating may require the use of
fuses with appropriate time-delay characteristics.
Short Circuit Withstand Rating Suitable for use on a circuit capable of delivering not more than 200,000 RMS symmetrical amperes
at the voltage rating of receptacle when protected by Class “J” fuses.
Note: Replacement fused switch must be the same type Hubbell switch as original and have equal or greater short circuit current withstand rating.
Circuit-Lock® Fused Disconnect Switch
Specifications
Moisture Resistance Indoor and Outdoor – Type 4X (Wash down, Corrosion resistant);
Indoor – Type 12 (Dust-tight, Falling Dirt, Noncorrosive Liquids).
Flammability UL94-5VA and V0 Classification.
Operating Temperature Maximum Continuous 75°C;
Minimum Continuous -40°C without impact.
UV Resistance All materials are UV stabilized.
Dielectric Voltage Withstands 3000V AC minimum.
Max. Working Voltage 600V AC RMS.
Impact Resistance In accordance with UL 746C.
Terminal Identification In accordance with UL, CSA and international conventions.
Product Identification Identification and ratings are part of external label.
Mounting External fully adjustable feet.
Fuse Types UL Listed, Class “J”; CSA Certified, HRCI-J.
Materials
Part Material
Base Valox®
Door Valox®
Handle Valox®
Conduit Hub Zinc, 30A Fused – 1 in., 60A Fused – 1¼ in.
Enclosure Gasket Neoprene
Shaft Brass
Shaft Seal Neoprene
Frame Galvanized Steel
Ground Plate Galvanized Steel
Enclosure Screws Stainless Steel 300 Series
Valox® is a trademark of SABIC Innovative Plastics, acquired from General Electric Company.
www.hubbell-wiring.comF-14 Wiring Device-Kellems
®
Hazardous Location Non-Fused Disconnect Switches
Hubbell’s hazardous location line of non-fused disconnect switches are typically
used for applications with the presence of flammable gasses or vapors, ignitable
dusts and fibers. They are also suitable for use in outdoor or indoor damp, wet
and dirty locations or in areas where frequent wash downs, heavy rain, or water
spray routinely occurs. These switches are compact in size to reduce cost and
make it easier to position on the wall or piece of equipment. The enclosures are
made of copper-free aluminum and have a polyester/epoxy finish to prevent
corrosion. The high visibility handles can be locked out to comply with OSHA
lock out/tag out regulations.
Features
• Compact size enclosures provide application flexibility with cost savings
over industry standard sizes.
• Fewer cover bolts reduces installation and maintenance time.
• Gasketed flange with O-ring located inside bolt circle to seal out moisture.
• Rotary handle style operating mechanism with lockout provision as standard.
• Removable ductile mounting lugs adjust to irregular mounting surfaces.
• Bodies have top and bottom drilled and tapped conduit entrances for
power connection.
• UL98 certified switch.
Applications
• Grain manufacturing and storage
• Industrial chemical and gas manufacturing
• Petroleum refining
• Fertilizer manufacturing
• Vehicle repair/paint shops
• Coal mining
• Cotton and fabric mills
Class I, Div. 1 & 2, Groups B,C,D
Class l, Zones 1 & 2, Groups llB+ H2, llA
Class II, Div. 1 & 2, Groups E,F,G
Class III, NEMA 3, 4, 4X, 7(B,C,D), 9(E,F,G)
HBLB7NFD26A
HBLB7NFD13A
Switched Disconnects and Enclosures
Wiring Devices for Hazardous Locations
Features and Applications
Copper-free aluminum construction
with electrostatically applied polyester/
epoxy nish to prevent corrosion
Large visible rotary handle with
“On-Off” indicator allows a quick
means of disconnecting power
Lockable handle to meet
OSHA Lockout/Tagout
regulations
Lockable handle to meet
OSHA Lockout/Tagout
regulations
Compact NEMA 4X enclosure and
footfrint allows easy installation in
tight locations
• 316 Stainless steel bolts
• Top and bottom drilled and
tapped conduit entrances
• For use as motor disconnects
F-15www.hubbell-wiring.com Wiring Device-Kellems
®
HBLB7NFD26A
HBLB7NFD13A
HBLVSQ3034
HBLVP3485
Switched Disconnects and Enclosures
Wiring Devices for Hazardous Locations
30, 60 and 100 Ampere
30, 60 and 100 Amp Unfused Hazardous Location Disconnect Switches
Description Catalog Number
30A 3 Pole disconnect switch. HBLB7NFD13A
30A 3 Pole disconnect switch with auxuliary contact. HBLB7NFD13AA
60A 3 Pole disconnect switch. HBLB7NFD26A
60A 3 Pole disconnect switch with auxuliary contact. HBLB7NFD26AA
100A 3 Pole disconnect switch. HBLB7NFD21A
100A 3 Pole disconnect switch with auxuliary contact. HBLB7NFD21AA
Horsepower Ratings
Switch
Amps/Phase
Single Phase HP Three Phase HP DC HP Terminal
Wire Size
Conduit
Sizes Catalog Number120V AC 230V AC 208V AC 230V AC 480V AC 600V AC 230V DC
30A / 3P 2 5 10 10 20 30 1#14-10 1 NPT HBLB7NFD13A
60A / 3P 3 7.5 20 20 40 40 10 #14-4 1½ NPT HBLB7NFD26A
100A / 3P 5 15 25 30 50 50 20 #8-1 1½ NPT HBLB7NFD21A
Dimensions
Outside Box Inside Box Mounting Dimensions
A B C D E F G H I J K
30 Amp 5³⁄₄ 8¹⁄₁₆ 6⁵⁄₁₆ 3⁵⁄₈ 5¹³⁄₁₆ 5¹⁄₁₆ 3¹⁄₈ 8¹⁄₈ – – 1¹⁄₄
60 & 100 Amp 8¹⁄₈ 13¹⁄₁₆ 7¹³⁄₁₆ 4¹⁄₄ 9³⁄₁₆ 6⁵⁄₁₆ 2¹⁄₂ 11³⁄₈ 6³⁄₈ 7¹⁄₂ 1¹³⁄₁₆
Unfused Mechanical Interlocks and Plugs
Amp Poles/Wires Voltage AC Receptacle Plug
30 3 Pole, 2 Wire 600V AC HBLVSQ3023 HBLVP3385
4 Pole, 3 Wire 600V AC HBLVSQ3034 HBLVP3485
60 3 Pole, 2 Wire 600V AC HBLVSQ6023 HBLVP6385
4 Pole, 3 Wire 600V AC HBLVSQ6034 HBLVP6485
Note: HBLVSQ 30 amp models come standard with 1" drilled and tapped conduit openings top and bottom plus
two 1" x ¾" reducers and one ¾" close-up plug for maximum flexibility. 60 amp models come with one 1½"
opening on top and bottom and one 1½" close-up plug.
AI
DG
BEHJC
F
K
Fixed Lug Position for HBLB7NFD13A
Optional Position for HBLB7NFD2 A-Series
Standard Lug Position for
HBLB7NFD2 A-Series
Standard Materials/Finish
• Enclosures: Copper-free aluminum (less than 4/10 of 1% copper content)
• Cover Bolts: 316 Stainless Steel
• O-Ring Gasket: Silicone
• Finish: Grey Powder Polyester painted exterior, electrostatically applied
• Ratings: 600V AC, 230V DC 30–100 Amp
Dimensions in Inches (mm)
www.hubbell-wiring.comF-16 Wiring Device-Kellems
®
Circuit-Lock® controllers rated “Suitable as Motor Disconnect”
The most complete offering of controllers with top horsepower and high amperage
ratings in such a compact device.
Shared Features
Strong on/off action with quick-make,
slow break operation
• Provides long-life reliability
• 10,000 Amp High Fault Short Circuit
Withstand Rating
Thermoset Body
• Provides high resistance to electrical
arc tracking
• Withstands high temperatures
• Excellent dimensional stability
• Superior dielectric strength
Front and Back Wiring
Steel Screws and
Copper Terminals
Recessed Wiring Wells
Finger safe environments
60A and 85A
#10 Brass Terminal Screw
Clamping plate for secure
back or side wiring (30A only)
30A, 40A and 50A
Optional Side Guard
For close wall applications
and nger safe environments
Switched Disconnects and Enclosures
AC Manual Toggle Controllers/Disconnects
30, 40, 50, 60 and 85A 600V AC
100% Copper Contact Arm
• High heat management
• Reliability
Optional Side Finger Guards
For close wall applications
and nger safe environments.
For 30A, 40A and 50A
controllers.
Four Large Silver Alloy
Contacts per Pole
• Excellent conductivity
• Maximum longevity
Lubrication-Free Controller
• Continued on/off cycling
even in harsh, dust and
high heat environments
F-17www.hubbell-wiring.com Wiring Device-Kellems
®
Dimensions in Inches (mm)
Specications
Electrical Performance
Dielectric Voltage Min. 2,200V AC minimum for 1 minute
Electrical Life Min. 6,000 Cycles at rated switch load
Max. Working Voltage 600V AC RMS
Switches 10,000 RMS
Short Circuit 30A & 40A 60A max. when protected by J fuses
Withstand Rating 50A 50A max. when protected by J fuses
as Motor Disconnect 60A & 85A 80A max. when protected by J fuses
Short Circuit
Withstand Rating All Switches 125A max. RK5 fuses
as Motor Controller
Mechanical
Mechanical Life Min. 10,000 minimum cycles
Switch Rating AWG Max.
Terminal 30A #10
Accommodations 40A & 50A #8**
60A & 85A #4
Wire Type Solid and stranded copper wire only.
Terminal Torque 30A – 50A 20 inch pounds
Switch Rating 60A – 85A 25 inch pounds
Environmental
Flammability UL94HB/VO
Operating Temp. Max. 75°C
Min. -40°C continuous without impact
Listings
Industrial Control File
UL 508 #E70402
CSA-C22.2 No.14 LR-46186
Note: **Use listed certified ring terminal.
Dimensions
2.25"
(57.2)
3.78"
(96.0)
2.38"
(60.4)
3.28"
(83.3)
ON
ON
2.44"
(62.0)
1.53"
(38.9)
3.56"
(90.4)
3.28"
(83.3)
3.78"
(96.0)
2.38"
(60.4)
2.83"
(71.9)
1.92"
(48.8)
Front Side
30, 40 and 50 Amp Standard Toggles
Front Side
60 and 85 Amp Standard Toggles
HBL7810D HBL7853D
HBL7863D HBLFG30
Switched Disconnects and Enclosures
AC Manual Toggle Controllers/Disconnects
30, 40, 50, 60 and 85A 600V AC
600V AC Manual Motor Controllers/Disconnects
For use in almost any industrial environment. Ideal component switch for motor control
and as a disconnect. Toggle controllers can be built into equipment and enclosures for
either box or panel-mount installation.
Amp Poles ToggleType Wire
HP Rating
Catalog Number
120V AC
1Ø
240V AC
3Ø
480V AC
3Ø
600V AC
3Ø
30 2
2
2
3
3
Standard
Short
Standard
Standard
Short
Back/Side
Back/Side
Back/Side
Back/Side
Back/Side
2
2
2
3
3
5
5
5
7.5
7.5
10
10
10
15
15
15
15
15
20
20
HBL7832D
HBL7832DS
HBL7832DX
HBL7810D
HBL7810DS
40 2
3
Standard
Standard
Side
Side
2
3
5
7.5
10
15
15
20
HBL7842D
HBL7843D
50 2
3
Standard
Standard
Side
Side
2
3
5
7.5
10
15
15
25
HBL7852D
HBL7853D
60 2
3
2
3
Standard
Standard
Standard
Standard
Back
Back
Front
Front
—
—
—
—
10
10
10
10
15
25
15
25
20
30
20
30
HBL7862D
HBL7863D
HBL7862FWD
HBL7863FWD
85 2
3
Standard
Standard
Back
Back
—
—
10
10
15
25
20
40
HBL7882D
HBL7883D
Optional Side Guard, for close wall applications and finger safe environments. HBLFG30*
Note: *For 30A, 40A and 50A controllers.
www.hubbell-wiring.comF-18 Wiring Device-Kellems
®
Dimensions in Inches (mm)
Circuit-Lock® NEMA 1 Enclosures without Switch
For use with switches shown on page F-17.
Description Cover Material Base Material
No. Equipment
Grounds Catalog Number
For use with 30A switch. Thermoplastic Steel 1HBL13 9 0
For use with 30A switch. Aluminum Aluminum 2HBL1370
Dimensions
HBL1370, HBL1372D and HBL1379D HBL1390, HBL1389D and HBL1392D
0.92"
(23.2)
1/2" x 3/4"
Knockout
Each End
2.41"
(61.3)
3.15"
(80.0)
4.72"
(120.0)
2.75"
(69.8)
2.44"
(61.9)
1.50"
(38.1)
2 - 0.265" (6.7)
Mounting Holes
2 - 1/2"
Knockouts
3.20"
(81.2)
Back
Bottom
3.97"
(100.8)
2.76"
(70.1)
4.52"
(114.8)
2.38"
(60.5)
2.00"
(50.8)
2 - 0.265" (6.7)
Mounting Holes
2 - 1/2" x 3/4"
Knockouts
0.88"
(22.42)
3.43"
(87.1)
2.65"
(67.3)
1/2" x 3/4"
Knockout
Each End
Back
Bottom
Thermoplastic Cover
on a Plated Steel Base
Durable, non-conductive cover
HBL1389D
HBL1379D
All Aluminum
Cover and Base
Base is pre-drilled for
rear surface mounting
Circuit-Lock® NEMA 1 Enclosures with Switch
Ideal for use in industrial environments, i.e. conveyer systems, industrial fans, etc.
Amp Poles Enclosure Material
HP Rating
Catalog Number
120V AC
1Ø
240V AC
3Ø
480V AC
3Ø
600V AC
3Ø
30 2Thermoplastic 2 5 10 15 HBL1392D
30 3Thermoplastic 37.5 15 20 HBL13 8 9 D
30 2Aluminum 2 5 10 15 HBL1372D
30 3Aluminum 37.5 15 20 HBL1379D
Note: See page F-17 for technical information.
Switched Disconnects and Enclosures
NEMA 1 Disconnect Switches
“Suitable as Motor Disconnects”
Shared Features
Wiring conduit knockouts
• ½" and ¾" NPT
• Top, bottom or back wire
entry points
Surface mount control
Switch can be locked in the off position
as a method of compliance with OSHA
lockout/tagout
HBL139 0 HBL1370
HBL13 8 9D HBL1379D
F-19www.hubbell-wiring.com Wiring Device-Kellems
®
Dimensions in Inches (mm)
HBL13R23D HBL13R13D
0.30" (7.6)
Padlock Hole
2.99"
(75.9)
4.55"
(115.6)
2.99"
(75.9)
2.22"
(56.4)
4.76"
(120.9)
5.42"
(137.7)
OFF
ON
4.51"
(57.2)
2.93"
(74.4)
1.84"
(46.7)
3 - 1/2"
Hubs
3.24
"
(82.3)
Front Side Back SideFront
3.94"
(100.1)
0.34" (8.6)
Padlock Hole
HBL13R22D and HBL13R23D HBL13R12D and HBL13R13D
Dimensions
4.40" (111.8)
10.11"
(256.8)
4.28" (108.7)
0.31" (7.9)
Padlock Hole 2.00"
(50.8)
3.30"
(83.8)
2.75"
(69.9)
1.52" (38.6)
2 - 3/4" x 1"
Knockouts
1.99"
(50.5)
3.30"
(83.3)
2.75"
(69.9)
1.06"
(26.9)
2 - 3/4"
Knockout
s
4.40"
(111.8)
5.52"
(140.2)
4.28"
(108.7)
0.31" (7.9)
Padlock Hole
Front Bottom BottomFront
HBL13R90, HBL13R89D and HBL13R92D HBL16R90, HBL16R92D and HBL16R93D
Dimensions
Circuit-Lock® NEMA 3/3R Enclosures with Switch
Ideal for use on outdoor equipment.
Amp Poles Enclosure Material
HP Rating
Catalog Number
120V AC
1Ø
240V AC
3Ø
480V AC
3Ø
600V AC
3Ø
30 2Thermoplastic 2 5 10 15 HBL13R 22D
30 3Thermoplastic 37.5 15 20 HBL13R23D
30 2Aluminum 2 5 10 15 HBL13R12 D†
30 3Aluminum 37.5 15 20 HBL13R13D†
Note: See page F-17 for technical information.
*Drill weephole to alter from NEMA 3 to NEMA 3R.
†Equipped with HBLFG30 sidewall insulation barriers.
Circuit-Lock® NEMA 3R Enclosures without Switch
For use with switches shown on page F-17.
Description Enclosure Material Catalog Number
For use with 30A switch. Aluminum HBL13R9 0
For use with 60A switch. Aluminum HBL16R9 0
Circuit-Lock® NEMA 3R Enclosures with Switch
Ideal for use in outdoor environments.
Amp Poles Enclosure Material
HP Rating
Catalog Number
120V AC
1Ø
240V AC
3Ø
480V AC
3Ø
600V AC
3Ø
30 2Aluminum 2 5 10 15 HBL13R92D
30 3Aluminum 37.5 15 20 HBL13R89D
60 2Aluminum —10 15 20 HBL16R92D
60 3Aluminum —10 25 30 HBL16R93D
Note: For switch specifications refer to page F-17.
Switched Disconnects and Enclosures
NEMA 3/3R and 3R Disconnect Switches
“Suitable as Motor Disconnects”
HBL13R89D HBL16R93D
www.hubbell-wiring.comF-20 Wiring Device-Kellems
®
HBL7810D
2.38"
(60.5)
2.25"
(57.1)
3.28"
(83.3)
(4)
#10-32
TAP
(2) .20 Dia.
Mtg. Holes
3.78"
(96.0)
HBL1379D
3.20"
(81.3)
2.41"
(61.2)
4.72"
(119.9)
HBL1389D
3.97"
(100.8)
2.62"
(66.5)
4.52"
(114.8)
HBL13R13D
2.25"
(57.2)
4.51"
(114.6)
3.94"
(100.1)
HBL13S33D
6.96"
(176.8)
4.00"
(101.6)
6.75"
(171.5)
HBL13R23D
2.99" (75.9)
4.76"
(120.9)
4.55" (115.6)
2.99"
(75.9)
0.30" (7.6)
Padlock Hol
e
HBL13R89D
3.00"
(76.2)
5.52"
(140.2)
4.40"
(111.8)
Switches
30 Ampere, 600 Volts AC Manual Motor Controllers
“Suitable as Motor Disconnect”
30A 600V AC Manual Motor Controllers, Double Pole
Description Catalog Number
30A, double pole, single throw, AC manual motor controller,
black nylon handle, side and back wired.
HBL7832D
30A, double pole, single throw, AC manual motor controller,
black nylon handle, short toggle.
HBL7832DS
30A, double pole, single throw, AC manual motor controller.
50 piece bulk pack.
HBL7832DX
HBL7832D in HBL1390 Type 1 enclosure with non-metallic cover,
½ in. and ¾ in. knockouts on top, bottom and back of steel frame.
HBL1392D
HBL7832D in HBL1370 metal Type 1 enclosure. HBL1372 D
HBL7832D in NEMA 3R non-metallic enclosure. HBL13R2 2 D
HBL7832D in HBL13R90 metal Type 3R enclosure. HBL13R92D
HBL7832D in NEMA 3R flip-lid enclosure. HBL13R12D
Note: See page F-17 for technical information.
30A 600V AC Manual Motor Controllers, Three Pole
Description Catalog Number
30A, three pole, single throw, AC manual motor controller,
black nylon handle, side and back wired.
HBL7810D
30A, three pole, single throw, AC manual motor controller,
black nylon handle, short toggle.
HBL7810DS
HBL7810D in HBL1390 Type 1 enclosure with non-metallic cover,
½ in. and ¾ in. knockouts on top, bottom and back of steel frame.
HBL13 8 9D
HBL7810D in HBL1370 metal Type 1 enclosure. HBL1379D
HBL7810D in NEMA 3R non-metallic enclosure. HBL13R23D
HBL7810D in HBL13R90 metal Type 3R enclosure. HBL13R89D
HBL7810D in NEMA 3R flip-lid enclosure. HBL13R13D
30A, 600V, three pole, rotary controller in NEMA 4X
stainless steel enclosure.
HBL13S33D
30A, 600V, three pole, rotary controller in NEMA 4X non-metallic enclosure. HBL13X3 3D
Note: See page F-17 for technical information.
Motor Rating
Product 120V AC 240V AC 480V AC 600V AC Phase
30A Double Pole 2HP 5HP 10HP 15HP 1
30A Three Pole 3HP 7½HP 15HP 20HP 3
40A Double Pole 2HP 5HP 10HP 15HP 1
40A Three Pole 3HP 7½HP 15HP 20HP 3
50A Double Pole 2HP 5HP 10HP 15HP 1
50A Three Pole 3HP 7½HP 15HP 25HP 3
60A Double Pole - 10HP 15HP 20HP 1
60A Three Pole - 10HP 25HP 30HP 3
85A Double Pole - 10HP 15HP 20HP 1
85A Three Pole - 10HP 25HP 40HP 3
Dimensions in Inches (mm)
F-21www.hubbell-wiring.com Wiring Device-Kellems
®
HBL16S63D
4.00"
(101.6)
8.00"
(203.2)
6.95"
(176.5)
3.78
"
(96.0)
3.28"
(83.3)
2.38"
(60.5)
1.5"
(38.1)
.20" DIA
(5.1)
2.31"
(58.7)
2.82"
(71.6)
1.75"
(44.5)
HBL7862D
.40"
(10.2)
3.38"
(85.9) #10-32 TAP
3.78"
(96.0)
3.38"
(85.9) .40"
(10.2)
1.5"
(38.1)
2.31"
(58.7)
2.82"
(71.6)
1.75"
(44.5)
HBL7862FWD
#10-32 TAP
3.28"
(83.3)
2.38"
(60.5)
.20" DIA
(5.1)
HBL16R93D
10.11"
(256.8)
4.40"
(111.8)
3.00"
(76.2)
40A 600V AC Manual Motor Controllers
Description Catalog Number
40A, double pole, single throw, AC manual motor controller,
black nylon handle, side wired.
HBL7842D
40A, three pole, single throw, AC manual motor controller,
black nylon handle, side wired.
HBL7843D
Note: See page F-17 for technical information.
50A 600V AC Manual Motor Controllers
Description Catalog Number
50A, double pole, single throw, AC manual motor controller,
black nylon handle, side wired.
HBL7852D
50A, three pole, single throw, AC manual motor controller,
black nylon handle, side wired.
HBL7853D
Note: See page F-17 for technical information.
60A 600V AC Manual Motor Controllers
Description Catalog Number
60A, double pole, single throw, AC manual motor controller,
black nylon handle, back wired.
HBL7862D
Same as HBL7862D except front wired. HBL7862FWD
HBL7862FWD in Type 3R enclosure. HBL16R92D
60A, three pole, single throw, AC manual motor controller,
black nylon handle, back wired.
HBL7863D
Same as HBL7863D except front wired. HBL7863FWD
HBL7863FWD in a Type 3R enclosure. HBL16R93D
60A, 600V, three pole, rotary controller in NEMA 4X
stainless steel enclosure.
HBL16S63D
60A, 600V, three pole, rotary controller in NEMA 4X
non-metallic enclosure.
HBL16X6 3D
Note: See page F-17 for technical information.
85A 600V AC Manual Motor Controllers
Description Catalog Number
85A, double pole, single throw, AC manual motor controller,
black nylon handle, back wired.
HBL7882D
85A, three pole, single throw, AC manual motor controller,
black nylon handle, back wired.
HBL7883D
Note: See page F-17 for technical information.
Motor Controller Accessories
Description Catalog Number
Finger Guards, fit 30A, 40A and 50A controllers. HBLFG30
Auxiliary Contacts, NO/Common/NC, for use in rotary switches only. HBLAUX
IP44*
SUITABILITY
AC Switches
40, 50, 60 and 85 Ampere, 600 Volts AC Manual Motor Controllers
“Suitable as Motor Disconnect”
Dimensions in Inches (mm)
www.hubbell-wiring.comF-22 Wiring Device-Kellems
®
Dimensions in Inches (mm)
HBL13X3 3DHBL16S63D
Dimensions
HBL13S33D HBL16S63D
Front Side
4.25"
(108.0)
6.10"
(154.9)
6.00"
(152.4)
6.75"
(171.5)
7.44"
(189.0)
6.96"
(176.8)
4.00"
(101.6)
Front Side
9.44"
(239.8)
8.00"
(203.2)
4.25"
(108.0)
6.10"
(154.9)
4.00"
(101.6)
6.95"
(176.5)
8.75"
(222.3)
Up to 2 Optional Auxiliary Contacts
For PLCs and external indicators
Interlocking Shaft and Handle
Prevents cover removal
when switch is on
Poured in Closed Cell
Neoprene Gasket
Circuit-Lock® NEMA 4X Enclosures with Switch and Accessories
Ideal for use in environments where wash-down is necessary, i.e. food processing, laboratories, etc.
Amp Poles Enclosure Material
HP Rating
Catalog Number
120V AC
1Ø
240V AC
3Ø
480V AC
3Ø
600V AC
3Ø
30 2Stainless Steel 37.5 15 20 HBL13S33D
30 3Valox 37. 5 15 20 HBL13X33D
60 3Stainless Steel —10 25 30 HBL16S63D
60 3Valox —10 25 30 HBL16X63D
Finger Guard option for 30A switch. HBLFG30
NO/Comon/NC auxiliary contact, 10A 120/250V AC for 30 and 60 Amp switches. HBLAUX
Note: See page F-17 for technical information.
Switched Disconnects and Enclosures
NEMA 4X Disconnect Switches
“Suitable as Motor Disconnects”
Shared Features
Un-drilled case allows custom placement
of wire entry
Switch can be locked in the off position
as a method of compliance with OSHA
lockout/tagout
HBL13X33D
Thermoplastic
4X Non-Metallic
Enclosures HBL13S33D
Hinged Cover with
Removable Continuous Pin
Valox® Handle and Collar
Chemical and impact resistant
304 Stainless Steel Enclosure
Chemical and corrosion resistant
Valox® is a trademark of SABIC Innovative Plastics, acquired from General Electric Company.
F-23www.hubbell-wiring.com Wiring Device-Kellems
®
PBS Series Heavy Duty Pendant Pushbutton Stations, NEMA 3R
Description Catalog Number
2 button, single speed.
2 button, two speed.
PBS2
PBS22
4 button, single speed.
4 button, two speed.
PBS4
PBS42
6 button, single speed.
6 button, two speed.
PBS6
PBS62
8 button, single speed.
8 button, two speed.
PBS8
PBS82
Product Dimensions, PBS Series
Style AApprox. Wt. Assembled Catalog Number
2 button 7.88" (200.0) 2.5 lbs PBS2
4 button 13.69" ( 3 47.6 ) 4.5 lbs PBS4
6 button 18.0" (457.2) 5.5 lbs PBS6
8 button 22.31" (566.7) 7.5 l bs PBS8
Note: Housing: Yellow vinyl rubber.
Contact Interrupting Ratings, PBS Series
Two-Speed Single Break Voltage Current
AC 120V 6A
35% PF 240V 3A
DC 125V .4A
IND 250V .2A
Single-Speed Double Break Voltage Current
AC 120V 6A
35% PF 240V 3A
DC 125V 1.1A
IND 250V .55A
IP44
SUITABILITY
Switched Disconnects and Enclosures
Pendant Pushbutton Stations
CPB and PBS Series
Cable Entrance Threaded
1" (25.4) NPT I.D.
1.125" (28.6) O.D.
30mm
K.O.
3.25"
(82.6) 0.88"
(22.4)
3.50"
(88.9)
A
PBS6
Momentary
(On / Off)
CPB20
Top
Bott.
Bott.
Bott.
Top
Ctr.
Ctr.
Ctr.
TAB
N.O.1 Com.1 N.C.1
N.O.1
Top
N.O.1
Com.1 N.O.2
N.O.2
Single Speed*
CPB21
Two Speed*
CPB22
Wiring Diagram CPB2 Series
*Mechanical “floating ball” interlock
prevents activating both Pushbuttons
simultaneously.
9.13"
(231.9)
1.06"
(26.9)
CPB21
2.38"
(60.5)
CPB Series Compact Pendant Stations, Two Button, NEMA 4X
Description Catalog Number
Single-speed normally open-normally closed without mechanical interlock. CPB20
Single-speed with mechanical interlock between pushbuttons. CPB21
Two-speed with mechanical interlock between pushbuttons. CPB22
Note: Included with product: nylon cord grip and sealing washer (must be installed to achieve NEMA 4X rating).
Indication label pack. Cord dia. range .375–.625 in. (9.5–15.9)
Ambient temperatures: 25°F to 140°F (32°C to 60°C).
Typical applications: Package electric motor hoists. Remote control of machinery.
Contact Ratings, CPB Series
Single-Speed Voltage Current
AC 120V 6A
35% PF 240V 3A
DC 125V 1.1A
IND 250V .55A
Two-Speed Voltage Current
AC 120V 3A
35% PF 240V 1.5A
IP55
SUITABILITY
Dimensions in Inches (mm)
www.hubbell-wiring.comF-24 Wiring Device-Kellems
®
PG2 PG6
MS2 MS5
TB2
TB5
PBSBCPBSLP
PBSPL1
07401023
Replacement Inserts
When the insert switches are in need of replacement, simply unplug the old insert and plug in a new one.
Description Catalog Number
Single speed insert momentary N.O. and N.C. PG2
On-Off insert (no mechanical interlock). Momentary, start-stop, reset-stop. PG6
2 or 3 speed insert, momentary. Used to a maximum of 3 speed points. MS2
5 speed insert, momentary. Used to a maximum of 5 speed points. For five speed
applications replace an existing terminal board with the TB5 terminal board and
replace an existing insert with the five speed (MS5) insert.
MS5
Conversion Inserts
In addition to single speed and two speed applications, pre-assembled units can be adapted to
handle other applications.
Description Catalog Number
Terminal board, required for each insert switch PG2, PG6 and MS2. TB2
Terminal board, required for insert switch MS5. TB5
Accessories
Description Catalog Number
Indicator labels for replacement package contains 1 each: hoist, trolley, bridge,
forward-reverse, raise-lower, in-out, right left, east-west, north-south, reset-stop,
start-stop, power, main hoist, auxuliary hoist, on-off, up-down.
PBSLP
Rubber button cover for replacement purposes. PBSBC
120V red pilot light for 4, 6, and 8 button units only. PBSPL1*
Note: *Each pendant station can accommodate one of the pilot light in the 1.20 in. (30.6) diameter mounting hole.
Kellems® Deluxe Aluminum Cord Fitting
Outdoor or indoors where subject to moisture, splash or submersion. Kellems grips provide strain
relief for multi-conductor cable.
Description Cord Range Catalog Number
Kellems grip. .750"-.875" (19-22.2) 07401023
Kellems grip. .875"-1.00" (22.2-25.4) 07401025
Switched Disconnects and Enclosures
Pendant Pushbutton Stations
Accessories and Replacement Parts