060-0572-05 - Honeywell Test & Measurement

Precision Low Proﬁle Load Cell

Model 41

DESCRIPTION

Model 41 is a low proﬁle “pancake” type load cells. These

bonded foil, strain gage load cells are engineered to measure

loads from 5 lb to 500,000 lb. The tension/ compression

Model 41 is designed with the threaded hole running completely

through the center of the cell. Model 41 utilizes two stabilizing

diaphragms, which are welded to the sensing member to

reduce off-center and side-loading effects. It provides high

performance in non-linearity, hysteresis, and repeatability speci-

ﬁcations for such applications as tube mills, extruding processes

and weighing. Each unit has a welded construction and can be

hermetically sealed for added durability. Model 41 load cells are

available with optional 0 Vdc to 5 Vdc or 4 mA to 20 mA output.

FEATURES

• 0.1%accuracy

• 5lbto500000lb

• mV/Voutput(standard);4mAto20mAand0Vdcto5Vdc

(optional)outputs

• Doublediaphragmdesign

• Intrinsicallysafeavailable(2Noptiononly)16

• CEapproved17

Approved Approved

2Honeywell•SensingandControl

Model 41

PERFORMANCE SPECIFICATIONS

Characteristic Measure

Load ranges18 5 lb to 500000 lb

Non-linearity,5lbto25lb ±0.2%fullscale

Non-linearity,

50 lb to 500000 lb ±0.1%fullscale

Hysteresis, 5 lb to 25 lb ±0.1%fullscale

Hysteresis,

50 lb to 500000 lb ±0.08%fullscale

Non-repeatability,5to25lb ±0.1%fullscale

Non-repeatability,

50 lb to 500000 lb ±0.03%fullscale

Output(tolerance),

5 lb to 25 lb 2mV/V±0.5%fullscale

Output(tolerance),

50 lb to 500000 lb 3mV/V±0.5%fullscale

Operation Compression/tension13

Resolution Inﬁnite

Standardcalibration 5-pointcalibration:0%,50%and100

%offullscaleintensiononly

ENVIRONMENTAL SPECIFICATIONS

Characteristic Measure

Temperature, operating -54°Cto121°C[-65°Fto250°F]

Temperature, compensated 15°Cto71°C[60°Fto160°F]

Temperature effect, zero 0.002%fullscale/°F

Temperature effect, span 0.002%fullscale/°F

ELECTRICAL SPECIFICATIONS

Characteristic Measure

Straingagetype Bonded foil

Excitation(calibration) 10 Vdc

Insulation resistance 5000 mOhm @ 50 Vdc

Bridge resistance

(tolerance)

350ohm(nominal)

Zerobalance(tolerance) ±1%fullscale

Shuntcalibrationdata Included

Electricaltermination(std)

5 lb to 5000 lb

PTIH-10-6P

Electricaltermination(std)

7500 lb to 500000 lb

MS3102E-14S-6P

Mating connector

5lbto5000lb(notincl.)

PT06A-10-6Sorequiv.(AA111)

Mating connector

7500to500000lb(notincl.)

MS3106A-14S-6S(AA121)

MECHANICAL SPECIFICATIONS

Characteristic Measure

Maximum allowable load 150%FS1

Weight Seetable

Material

Less than 200,000 lb

17-4PH stainless steel

Material greater than or

equalto300000lb

Carbonsteel

Deection Seetable

Naturalfrequency Seetable

RANGE CODES

Range

Code

Available ranges Range

Code

Available ranges

AT 5 lb DV 10000 lb

AV 10 lb EJ 15000 lb

BL 25 lb EL 20000 lb

BN 50 lb EN 30000 lb

BR 100 lb EP 50000 lb

CN 250 lb ER 75000 lb

CR 500 lb ET 100000 lb

CV 1000 lb FJ 150000 lb

DL 2000 lb FL 200000 lb

DN 3000 lb FN 300000 lb

DP 4000 lb FP 400000 lb

DR 5000 lb FR 500000 lb

DT 7500 lb

WIRING CODES

Connector Unamplied (Std.)

A(+)excitation

B(+)excitation

C(-)excitation

D(-)excitation

E(-)output

F(+)output

DEFLECTIONS AND RINGING FREQUENCIES

Capacity (lb) Deection @

full scale (in)

Natural ringing

frequency (Hz)

Weight

(lb)

5 to 25 0.001 2000 0.8

50 to 1000 0.002 4600 1.5

2000 to 5000 0.002 10000 2.0

7500 to 15000 0.003 6000 8.8

20000 to 50000 0.004 8000 11.0

75000 to 100000 0.006 5500 30.9

150000 to 200000 0.010 4500 46.3

300000 to 500000 0.010 4100 130.1

Honeywell•SensingandControl3

Precision Low Proﬁle Load Cell

iNTERNAL AMPLIFIERS

Amplier

specications

Voltage out-

put: Option 2b

Voltage out-

put: Option 2c

Voltage out-

put: Option 2t

Current three-

wire: Option 2j

Current two-

wire: Option

Intrinsically

safe amp: Op-

tion 2n (2N)***

Output signal ±5 V 0-5 V or ±5 V @

45 mA

0-10 V or ±10 V

@ 45 mA

4 mA to 20 mA 4 mA to 20 mA 4 mA to 20 mA

Input power (voltage) ±15 Vdc or 26-32

Vdc

11 Vdc to 28 Vdc 15 Vdc to 28 Vdc 22 Vdc to 32 Vdc 9 Vdc to

32 Vdc

9 Vdc to

28 Vdc

Input power (current) 45 mA 40 mA 40 mA 65 mA 4 mA to 28 mA 4 mA to 24 mA

Freq. response 3000 Hz 3000 Hz 3000 Hz 2500 Hz 300 Hz 2000 Hz

Power supply rejection 60 db 60 db 60 db 60 db 60 db 60 db

Operating temperature -20°Fto185°F -20°Fto185°F -20°Fto185°F 0°Fto185°F 0°Fto185°F -20°Fto185°F

Reverse volt. protection Yes Yes Yes Yes Yes Yes

Short circuit protection Momentary Momentary Momentary Yes Yes Yes

Wiring code: connector A(+)Supply

B Output common

CSupplyreturn

D(+)Output

EShuntCal1

FShuntCal2

A(+)Supply

B Output common**

CSupplyreturn**

D(+)Output

EShuntCal1

FShuntCal2

A(+)Supply

B Output common**

CSupplyreturn**

D(+)Output

EShuntCal1

FShuntCal2

A(+)Supply

B Output common**

CSupplyreturn**

D(+)Output

EShuntCal1

FShuntCal2

A(+)Supply

BNoconnection

CNoconnection

D(+)Output

ECaseground

FNoconnection

A(+)Supply

BNoconnection

CNoconnection

D(+)Output

ECaseground

FNoconnection

Wiring code: cable R(+)Supply

Bl Output common

GSupplyreturn

W(+)Output

BShuntCal1

BrShuntCal2

R(+)Supply

Bl Output com*

GSupplyreturn*

W(+)Output

BShuntCal1

BrShuntCal2

R(+)Supply

Bl Output com*

GSupplyreturn*

W(+)Output

BShuntCal1

BrShuntCal2

R(+)Supply

Bl Output com*

GSupplyreturn*

W(+)Output

BShuntCal1

BrShuntCal2

R(+)Supply

Bl(+)Output

WCaseground

R(+)Supply

Bl(+)Output

WCaseground

* Black and green wires are internally connected.

**PinsBandCareinternallyconnected.

***SeeourWebsite(http://measurementsensors.honeywell.com)forthemostup-to-dateinformationregardingintrinsicallysafeapprovals,ref.#008-0547-00.

ALLOWABLE MAXIMUM LOADS

Capacity (lb) Side load

(lb)

Bending

(lb-in)

Torque

(lb-ft)

5 to 25 50% 40% 25%

50 to 1000 45% 35% 25%

2000 to 5000 30% 25% 25%

7500 to 30000 20% 20% 15%

50000 to 100000 20% 20% 15%

150000 to 200000 20% 20% 15%

300000 20% 20% 10%

400000 20% 20% 10%

500000 20% 20% 10%

4Honeywell•SensingandControl

Model 41

OPTION CODES

Many range/option combinations are available in our quick-ship and fast-track manufacture programs.

Please see http://measurementsensors.honeywell.com for updated listings.

Load ranges 5, 10, 25, 50, 100, 250, 500, 1000, 2000, 5000, 3000, 4000, 7500, 10000, 15000, 20000, 30000, 50000, 75000, 100000, 150000,

200000, 300000, 400000, 500000 lb

Temperature

compensation

1a.60°Fto160°F

1b.30°Fto130°F

1c.0°Fto185°F

1d.-20°Fto130°F

1e.-20°Fto200°F

1f.70°Fto250°F

1g.70°Fto325°F14

1h.70°Fto400°F14

1i.-65°Fto250°F14

1j.0°Cto50°C

1k.-20°Cto85°C

1m.-25°Cto110°C

Internal

ampliers 10

2b. 4 wire, ±5 Vdc

2c. 0-5 Vdc output

2j.4-20mA(three-wire)

output

2k.4mAto20mA(two-

wire)20

2n(2N)4mAto20mA(wire)

intrinsically safe20

2t. 0 Vdc to 10 Vdc

2u. Unampliﬁed, mV/V output

Internal ampli-

er enhance-

ments

3a. Input/output isolation19

3d. Remote buffered shunt calibratrion8

Overload

stops

4a. Overload stops

Electrical

termination

6a. Bendix PTIH-10-6P 6-pin

(rangesto5000lb)

6b.MS3102E-14S-6P(rang-

es7500lbandup)9

6e.Integralcable:Teon

6f.Integralcable:PVC

6g.Integralcable:Neo-

prene9

6h.Integralcable:Silicone

6i. Integral underwater

cable9

6j. 1/2-14 conduit ﬁtting with

5ftof4conductorPVC

cable

6q.Moldedintegralcablepoly-

urethane9

6v. Phoenix connector on end of

cable

Shunt calibra-

tion

8a. Precision internal resistor14

Special cali-

bration

9a.10point(5up/5down)20%increments@68°F

9b.20point(10up/10down)10%increments@68°F

9c.ASTME-74calibration

Bridge resist-

ance

12b.5000ohm(foil)

Zero and span

adjustment

14a.Noaccesstopots

14b. Top access to pots

Electrical con-

nector orienta-

tion

15a. Horizontal electrical exit port orientation

15b. Vertical electrical exit port orientation

15c. Radial electrical exit port orientation

15d.Connectoronendofcable

Special cali-

bration

30a. Compression only calibration, positive in compression

30b. Tension and compression calibration, positive in tension

30c. Compression only calibration, negative in compression

30d. Tension and compression calibration, positive in compression

Bridge type 31a.Dualbridge

Shock and

vibration

44a.Shockandvibrationresistance

Interfaces 53e.Signaturecalibration14

53t.TEDSIEEE1451.4module15

Honeywell•SensingandControl5

Precision Low Proﬁle Load Cell

MOUNTING DIMENSIONS

Ranges

D mm

[in]

H mm

[in]

H***

[in]

F# ØG

mm [in]

B.C.

ØK mm

[in]

thru

T A mm

[in]

A* mm

[in]

B mm

[in]

B* mm

[in]

C mm

[in]

5, 10, 25 63,5

[2.50]

20,32

[0.80]

44,45

[1.75]

6 50,8

[2.000]

4,83

[0.19]

1/4-28

UNF

20,83

[0.82]

63,5

[2.5]

19,05

[0.75]

22,86

[0.9]

31,75

[1.25]

50, 100,

250, 500,

1000

76,2

[3.00]

25,4

[1.00]

44,45

[1.75]

6 57,15

[2.250]

7,11

[0.28]

3/8-24

UNF

20,83

[0.82]

63,5

[2.5]

19,05

[0.75]

22,86

[0.9]

31,75

[1.25]

2000,

3000,

4000,

5000

88,9

[3.50]

25,4

[1.00]

44,45

[1.75]

6 66,68

[2.625]

8,64

[0.34]

1/2-20

UNF

20,83

[0.82]

63,5

[2.5]

19,05

[0.75]

22,86

[0.9]

31,75

[1.25]

7500,

10000,

15000

139,7

[5.50]

45,7

[1.80]

45,7

[1.80]

8 114,3

[4.500]

10,16

[0.40]

1-14

UNS

31,75

[1.25]

58,42

[2.3]

38,1

[1.50]

38,1

[1.5]

50,8

[2.00}

20000,

30000,

50000

152,4

[6.00]

45,7

[1.80]

45,7

[1.80]

8 123,83

[4.875]

13,46

[0.53]

1 1/2-12

UNF

31,75

[1.25]

58,42

[2.3]

38,1

[1.50]

38,1

[1.5]

50,8

[2.00}

75000,

100000

228,6

[9.00]

63,5

[2.50]

63,5

[2.50]

12 196,85

[7.750]

16,76

[0.66]

2-12UN 31,75

[1.25]

58,42

[2.3]

38,1

[1.50]

38,1

[1.5]

50,8

[2.00}

150000,

200000

279,4

[11.00]

63,5

[2.50]

63,5

[2.50]

12 241,3

[9.500]

19,81

[0.78]

2 1/2-12

31,75

[1.25]

58,42

[2.3]

38,1

[1.50]

38,1

[1.5]

50,8

[2.00}

300000,

400000,

500000

355,6

[14.00]

107,95

[4.25]

107,95

[4.25]

12 298,45

[11.750]

26,16

[1.03]

3 1/2-8

31,75

[1.25]

58,42

[2.3]

38,1

[1.50]

38,1

[1.5]

*Lengthofloadcellwithampliedoption(seeoptioncodes)

**Cdimensionvariesonhighranges.Consultfactory

***Hdimensionwith2n(2N)amplier

TYPICAL SYSTEM DIAGRAM

Mounting options

1. Pull plate

2. Load button

Model 41

Customer supplied

Chart recorder

Alarm panel

Data acquisition

Computer

PLC

Display units

SC500

SC2000

SC2001

SC3004

GM (unampliﬁed only)

GM-A (ampliﬁed only)

NK (unampliﬁed only)

HH (unampliﬁed only)

In-line ampliﬁers (used with unampliﬁed units only)

Ampliﬁer Output

Universal in-line ampliﬁers

UV ±5 Vdc

UV-10 ±10 Vdc

UBP 0 ±5 Vdc

U3W 4 mA to 20 mA (3-wire)

U2W 4 mA to 20 mA (2-wire)

DIN rail mount in-line ampliﬁers

DV-05 0 ±5 Vdc (3-wire)

DA-05 4 mA to 20 mA (3-wire)

DV-10 0 ±10 Vdc (3-wire)

Mating connectors & cables

PT06A-10-6S, std.

PT06E-10-6S

MS3106A-14S-6S

008609-3-EN IL50 GLO

June 2013

Model 41 Precision Low Proﬁle Load Cell

Sensing and Control

Honeywell

1985 Douglas Drive North

Golden Valley, MN 55422 USA

www.honeywell.com/sensing

NOTES

1. Allowable maximum loads - maximum load to be applied without

damage.2

2. Without damage - loading to this level will not cause excessive zero

shift or performance degradation. The user must consider fatigue

life for long term use and structural integrity. All structurally critical

applications(overheadloading,etc.)shouldalwaysbedesignedwith

safety redundant load paths.

3. Interconnecting shunt cal. 1 terminal with shunt cal. 2 terminal pro-

vides50%(unampliedunits),75%(4mAto20mA3-wireunits)or

80%(voltageampliedunits)offullscaleoutputforquickcalibration.

Shuntcalibrationcomesstandardwithinternalamplieroption2b,2c,

2t and 2j.

4.O=Orange;Y=Yellow;B=Blue;Bl=Black;R=Red;Br=Brown;

W=White;G=Green.Colorspecifyingcableandnumberorletter

specifying connector.

5.Nomatingconnectornecessaryforcableoption.

6. Adding any internal ampliﬁers on 5 lb to 25 lb ranges will increase

delivery time.

7.Option2n(2N)on5to5000lb.rangeswilltypicallytake12weeksfor

delivery.

8.Option3disnotavailablewithoption2n(2N)or2k.

9.Notavailablewithoption1c,1e,1f,1g,1hor1i.

10.Consultfactory.

11.Availability varies with range, consult factory.

12.Optiononlypertinentwhenoption2n(2N)selected.

13.Standardcalibrationfortension/compressionloadcellsisintension

only.

14.Notavailablewithampliedoutput.

15.ConsultfactoryforTEDSavailabilitywithampliedmodels.

16.Rangedependent;consultfactory.Terminationdependent;consult

factory.

17.Internalampandterminationdependent;consultfactory.

18.ThisunitcalibratedtoImperial(non-Metric)units.

Find out more

Honeywell serves its customers

through a worldwide network of

sales ofﬁces, representatives

anddistributors.Forapplication

assistance, current speciﬁca-

tions, pricing or name of the

nearestAuthorizedDistributor,

contact your local sales ofﬁce.

To learn more about Honeywell’s

test and measurement products,

call +1-614-850-5000, visit

http://measurementsensors.

honeywell.com, ore-mailinqui-

ries to info.tm@honeywell.com

Warranty. Honeywell warrants goods of its manufacture as

being free of defective materials and faulty workmanship.

Honeywell’s standard product warranty applies unless agreed

tootherwisebyHoneywellinwriting;pleaserefertoyour

order acknowledgement or consult your local sales ofﬁce for

speciﬁc warranty details. If warranted goods are returned to

Honeywell during the period of coverage, Honeywell will repair

or replace, at its option, without charge those items it ﬁnds

defective. The foregoing is buyer’s sole remedy and is in lieu

of all warranties, expressed or implied, including those of

merchantability and tness for a particular purpose. In no

event shall Honeywell be liable for consequential, special, or

indirect damages.

While we provide application assistance personally, through our

literature and the Honeywell web site, it is up to the customer to

determine the suitability of the product in the application.

Specicationsmaychangewithoutnotice.Theinformationwe

supply is believed to be accurate and reliable as of this printing.

However, we assume no responsibility for its use.

WARNING

PERSONAL INJURY

•DONOTUSEtheseproductsassafetyoremergency

stop devices or in any other application where failure of

the product could result in personal injury.

Failure to comply with these instructions could result in

death or serious injury.

WARNING

MISUSE OF DOCUMENTATION

•Theinformationpresentedinthisdatasheetisfor

referenceonly.DONOTUSEthisdocumentasproduct

installation information.

•Completeinstallation,operationandmaintenance

information is provided in the instructions supplied with

each product.

Failure to comply with these instructions could result in

death or serious injury.

Mouser Electronics

Authorized Distributor

Click to View Pricing, Inventory, Delivery & Lifecycle Information:

Honeywell:

060-0574-03 060-0572-05 060-0571-07 060-0571-06