1N746A~1N759A
Zener diode
Features
1. High reliability
2. Very sharp reverse characteristi c
3. Zener voltage 3.3V to 12V
4. VZ-tolerance±5%
Applications
Voltage st abil ization
Absolute Maximum Ratings
Tj=25℃ Parameter Test Conditions Type Symbol Value Unit
Power dissipation Tamb≤75℃ P
V500 mW
Z-current IZPV/VZmA
Junction temperature Tj200 ℃
Storage temperature range Tstg -65~+200 ℃
Maximum Thermal Resistance
Tj=25℃ Parameter Test Conditions Symbol Value Unit
Junction ambient I=9.5mm(3/8”) T L=constant RthJA 300 K/W
Stresses exceeding maximum rati ngs may damage the device. Maximum ratings are stress ratings only. Functional operation above the
recommended operating conditions is not implied. Extended exposure to stresses above the recommended operating conditions may
affect device reliability.
Electrical Characteristics
Tj=25℃ Parameter Test Conditions Type Symbol Min Typ Max Unit
Forward voltage IF=200mA VF 1.5 V
Excel Semiconductor
www.excel-semi.com Rev. 3e, 1-Nov-2006
FaxBack +86-512-66607370 1/6
1N746A~1N759A
VZnom1) IZT for Z
ZT IR at V
RIZM2)
Type V mA Ω μA V mA
1N746A 3.3 20 28 10 1 110
1N747A 3.6 20 24 10 1 100
1N748A 3.9 20 23 10 1 95
1N749A 4.3 20 22 2 1 85
1N750A 4.7 20 19 2 1 75
1N751A 5.1 20 17 1 1 70
1N752A 5.6 20 11 1 1 65
1N753A 6.2 20 7 0.1 1 60
1N754A 6.8 20 5 0.1 1 55
1N755A 7.5 20 6 0.1 1 50
1N756A 8.2 20 8 0.1 1 45
1N757A 9.1 20 10 0.1 1 40
1N758A 10 20 17 0.1 1 35
1N759A 12 20 30 0.1 1 30
1) Tolerance and voltage designation(Vz):
The type numbers shown have a standard tolerance of ±5% on the nominal zener voltage, C for ±2%, D
for ±1%.
2) Maximum zener current ratings(IZM):
Maximum zener current ratings are based on maximum zener voltage of the individual units and JEDEC
250 mW rating.
Excel Semiconductor
www.excel-semi.com Rev. 3e, 1-Nov-2006
FaxBack +86-512-66607370 2/6
1N746A~1N759A
Characteristics (Tj=25℃ unless otherwise specified)
Figure 1. Typical Thermal Resistance Figure 2. Typical Forward Characteristics
Figure 3. Temperature coefficients
(-55℃ to +150℃ temperature range; 90% of the units are in the ranges indicated.)
Figure 4. Effect of zener current on zener impedance Figure 5. Effect of zener voltage on zener impedance
Excel Semiconductor
www.excel-semi.com Rev. 3e, 1-Nov-2006
FaxBack +86-512-66607370 3/6
1N746A~1N759A
Figure 6. Zener Voltage versus Zener Current – Vz=1 thru 16 Volts
Figure 7. Zener Voltage versus Zener Current – Vz=15 thru 30 Volts
Excel Semiconductor
www.excel-semi.com Rev. 3e, 1-Nov-2006
FaxBack +86-512-66607370 4/6
1N746A~1N759A
Figure 8. Zener Voltage versus Zener Current – Vz=30 thru 75 Volts
Excel Semiconductor
www.excel-semi.com Rev. 3e, 1-Nov-2006
FaxBack +86-512-66607370 5/6
1N746A~1N759A
Dimensions in mm
Type No.
Cathode identification
Φ2.0 max.
Φ0.55 max.
4.2 max. 26 min. 26 min.
Cathode Anode
1
7
N
5
Standard Glass Case
JEDEC DO-35
Marking
N
5
A
1
1
7
Excel Semiconductor
www.excel-semi.com Rev. 3e, 1-Nov-2006
FaxBack +86-512-66607370 6/6