AQrate Gen2 Ethernet PHYs TM 10GBASE-T | 5GBASE-T | 2.5GBASE-T | 1000BASE-T | 100BASE-TX Ethernet PHYs Product Overview The Aquantia(R) GEN2 AQrate PHYs are low-power, high-performance, multi-gigabit 10GBASE-T/5GBASET/2.5GBASE-T/1000BASE-T/100BASE-TX transceivers. AQrate technology enables broad-based market adoption of multi-gigabit network connectivity through a wide range of cable types including Cat 5e, Cat 6, and Cat 6a or above. AQrate bridges the bandwidth gap between legacy cabling infrastructure designed for 1 Gbps data rates and new applications that demand bandwidth in excess of 1 Gbps with zero changes to legacy cabling or infrastructure, enabling the unabated roll-out of higher-speed connectivity Applications solutions for Enterprise, Data Center, SMB/SOHO, Carrier, Automotive, and ISM (Industrial, Scientific, Medical) markets. Aquantia's GEN2 AQrate multi-gigabit AQrate PHYs are compliant with both the IEEE(R) 802.3an/bz standard and the NBASE-TTM Alliance PHY Specification to perform all the physical layer functions required to implement 10GBASET/5GBASE-T/2.5GBASE-T/1000BASE-T/100BASE-TX transmission over 100 meters of twisted pair cabling. The AQrate PHY family integrates such features as Energy Efficient Ethernet (EEE), Precision Time Protocol (PTP)/1588v2, IEEE MAC Security (MACsec), supports all PoE standards up to 100W, and supports jumbo packets up to 16KB in all operating modes. Device Name Speeds Package AQR407/AQR107 5-speed 10 Gbps/5 Gbps/2.5 Gbps/1 Gbps/ 100 Mbps AQR408/AQR108 4-speed 5 Gbps/2.5 Gbps/1 Gbps/ 100 Mbps AQR409/AQR109 3-speed 2.5 Gbps/1 Gbps/ 100 Mbps Quad: The AQR407/AQR408/AQR409 are pin-compatible, multi-gigabit, quad-port PHYs housed in 19 mm flip-chip BGA packages enabling efficient, high-density design for high port-count and compact switches across a range of speed requirements. Single: The AQR107/AQR108/AQR109 are pin-compatible, multi-gigabit, single-port PHYs that address multiple network connectivity applications and speed requirements. These devices are available in compact 7 mm x 11 mm flip-chip BGA packages featuring the Industrial (-40C to +108C) temperature operating range. 1 Minimum specification is ambient temperature, and the maximum is junction temperature. PHYs are a game changing technology enabling Enterprise, Data Center, SMB/ SOHO, Carrier, Automotive, and ISM (Industrial, Scientific, Medical) markets to evolve beyond 1 Gbps to 5 Gbps and 2.5 Gbps data rates. The single-port product family is ideally suited for wireless access point backhaul, residential gateways/ routers, client computing, and a myriad of networked device applications while the quad-port family permits efficient high-port density and compact switch design. Features Benefits * IEEE 802.3an/bz and NBASE-T featuring AQrate technology * - 0GBASE-T: 100 meters over Augmented Cat 6 (Cat 6A) and Cat 7, 1 55 meters over Cat 6, and best effort over Cat 5e Ability to support highest data rate possible with a given cable environment while reducing power and latency * - 5GBASE-T, 2.5GBASE-T: over 100 meters of Cat 5e or better cabling * Energy-Efficient Ethernet (EEE) * * MACsec (IEEE 802.1ae, MAC security standard) * 5G and 2.5G operation over legacy infrastructure, while delivering backward compatibility with existing equipment EEE lowers overall power consumption and lowers equipment operating costs MACsec provides for secure, encrypted data communications across networks Full support for Advanced Encryption Standard (AES-256) and standalone operation * PTP/1588v2 * Synchronous Ethernet (Sync-E), ITU-T standard in cooperation with IEEE * Integrated Wake-on-LAN (WoL) Support PTP/1588v2 provides for timing accuracy across the network * Sync-E synchronizes clock signals on the PCB * * Integrated packet filtering enables sub-1W support in 100BASE-TX mode * Enables deployment in thermally constrained environments Compliant to Microsoft Network Device Class specification * Built-in Thermal Management On-chip thermal sensor with alarm and warning thresholds * Advanced Cable Diagnostics Enables the deployment of meaningful cable analysis tools for debugging installation problems * On-chip high-resolution cable analyzer * High-Performance full KR (with autonegotiation)/ * Ensures trouble-free operation over a range of interconnect scenarios * XFI/USXGMII/2500BASE-X/SGMII I/F w/ AC-JTAC * Comprehensive interface support Capable of rate adapting all rates into KR/XFI via PAUSE and 100M/1G into 2500BASE-X * Advance Loopback and Diagnostic Capability S upports legacy and next generation MACs/switches/processors * Enables extensive system test and debug with remote loopback control * Robust Radio Frequency Interference (RFI) performance Flexible on-chip BERT Full 1-second packet counters and CRC-32 checkers * Integrated MDI Filter and Advanced RFI Cancellation Eliminates external filter components R esilient operation when exposed to RFI AQRATE PHY BLOCK DIAGRAM (PER-PORT) XFI, USGXMII, 2500BASE-X, SGMII SERDES I/F ENCODER/ DECODER DSP Aquantia Corp. | 105 E Tasman Dr, San Jose, CA 95134 | phone: +1.408.228.8300 | www.aquantia.com Aquantia Corp. reserves the right to make changes to the product(s) or information contained herein without notice. No liability is assumed as a result of their use or application. Aquantia and the Aquantia logo are trademarks of Aquantia Corp. Copyright (c) 2017 Aquantia Corp. ANALOG D/A & A/D Line Version: 1.0 PB-N2100