62/162 GB Series CE-2 Miniature Bayonet Lock Connectors MIL-C-26482 CONTENTS PAGES Introduction to 62GB solder connectors a8 Military specifications 5-7 Basic construction 184 Precautions against mis-mating or cross plugging 130 & 31 Sealing 3&4 Potting 3,8,9 & 26 Derating 1,10 & 11 Hermetic seal connectors 3,18 & 19 Filter pin connectors 3 Film wire 2& 24 Front demountable coupling rings 2 Rough grip heavy duty coupling rings 2 Lever coupling rings 2 Introduction to 162GB crimp connectors 4 Audio applications 4,24 &25 4 5 7 8 NN bh bP) N on Cable assembly facilities at Amphenol MIL-C-2648? qualification approval tests &6 DEF 5325 qualification approval tests Table of shell styles &9 Insert availability and voltage ratings 10 & 11 How to order 6? GB solder connectors 12 How to order 162 GB crimp connectors 13 Box mounting receptacles 14&15 Single hole fixing receptacles 16&17 Hermetic seal receptacles 18&19 Cable mounting receptacles 20 &21 Plugs 22 & 23 Plugs with optional coupling rings 24 & 25 Cable accessories 26 & 27 Cables to DEF 10 27 Accessories 28 & 29 Key/keyway orientations 31 Insert orientations 30 - * * e ee eR Ke ee ek OK 8 OR KR 8 ek ee ek ee ee 62 GB solder and 162 GB crimp assembly instructions 36 & 37 Amphenol 3 an LAYS, companyThis miniature bayonet lock connector series offers designers important features not found in any other range of connectors. The issue of certificate No. 1713 by the Ministry of Technology has verified the design leadership of 62GB connectors developed and manufactured entirely in the United Kingdom by Amphenol Limited. The certificate grants the connector series certified qualification approval to the United States Military Specification MIL-C-26482. 62GB series are the first and only British connectors to achieve this. The range already has full qualification approval to the British Defence Specification DEF STAN 59-35 (Part 1) Sec. 3 Patt. 105. A doubly strong position which Amphenol are well geared to handle. The manufacturing facilities of the Whitstable plant have been cited as exemplary in Europe. Certainly the layout is extensive and extremely efficient; safety awards have been attained every time returns have been submitted to the British Safety Council. 62GB Series connectors have been well established with Government authorities on an international scale and users can be found in Sweden, Denmark, Norway, Finland, Germany, Spain, Holland, India, Canada and Italy. Derating Connectors must be derated under the following operating conditions : 1. At elevated temperatures, the current ratings are reduced as shown in the table on page 10. 2. Athigh altitudes, revised voltage ratings become effective as shown on page 11. 3. When connectors to different specifications are inter- mated (e.g. Pattern 105 and MIL-C-26482), the combina- tion must not be operated under conditions more severe than the less stringent clause of either specification. Amphenol 62GB connectors are designed to meet the most stringent requirements of both specifications. Amphenol 62GB solder connectors FULLY QUALIFIED TO DEF STAN 59-35 (Part 1) Sec. 3. Patt. 105 CERTIFIED QUALIFICATION APPROVAL TO MIL-C-26482 Military Specifications The British Defence Specification DEF STAN 59-35 (part 1) Sec. 3 Patt. 105 closely corresponds to the United States Military specification MIL-C-26482 solder terminations. Certain differences exist between the schedules which can be seen on pages 5, 6 and 7. Approved gauges are used to check interchangeability of 62GB series with other connectors manufactured to Pattern 105 or MIL-C-26482. Basic Construction Connector shells are machined from solid aluminium bar stock-not forged or extruded as in competitive designs. Machining has inherent advantages in terms of strength and adaptability. 62GB Series can be supplied in brass or stainless steel, for instance. The normal shell finish used, which has a high resistance to corrosion, is cadmium plating with an olive-drab chromate treatment. Other finishes may bs supplied to special order, such as bright cadmium plate. Inserts are of polychloroprene rubber compounded to an Amphenol specification. Operating temperature range is 55C to +125C, and the connectors have gold-plated contacts designed for soldered connections, Configurations for size 20 contacts range between 2 contacts in the size 8 12-7mm (0-5in diameter) shell up to a maximum of 61 contacts in the size 24 36:1mm (1-5in diameter) shell, Intermediate sizes, and contact data for heavier current ratings are shown in the insert availability chart on page 10 and 11. Protection Against Mis-mating or Cross-Plugging In Pattern 105 positive shell-to-shell keying is provided with keys and keyways in a choice of either the normal (N) or any of the four preferred alternate positions: B, C, E and F. This prevents mismating between shells of different orient- ations and overcomes the difficulties associated with rotated inserts and a standard key/keyway orientation. In the latter system, damage to the inserts or contacts can result if excessive force is used to engage non-mating pairs. Rotated inserts are, however, permissible in Pattern 105 connectors if required to mate with or replace units to MIL-C-26482 mounted in existing equipment. Connectors having normal orientations manufactured to Pattern 105 or MIL-C-26482 are fully intermateable as also are connectors with inserts in positions W, X, Y or Z.Film Wire Receptacles may be supplied with pin or socket contacts to suit flexible printed wiring under deviation (219). Front Demountable Coupling Rings This feature is unique to Amphenols connectors and has important users benefits. A damaged coupling ring can be replaced or the bayonet track cleansed of dirt and the ring refitted. Both these operations can be carried out in the field as an emergency. Rough-grip Heavy Duty Coupling Rings Designed for use in difficult situations such as arctic temperatures where gloves would be worn or in muddy conditions where an equal grip problem exists. The rough- grip style of coupling ring has been found so useful that it is now incorporated into the Defence Standard. Deviation (044). Lever Coupling Rings Amphenols lever coupling ring design allows extremely close mounting of connectors. Mating and unmating is achieved with a 120 movement and it is easy to apply torque to the lever when connectors are mounted in confined spaces. Deviation (218).Sealing Peripheral seals are provided on the rubber inserts and the mating shells are sealed by a square-section gasket, Wire- sealing is achieved by the use of multiple risers in the rear grommet. Leakage rate for 62GB connectors is less than 1 cc per hour, 96.6 kN/m? (14 p.s.i.) for 62GB connectors. Potting Plugs and certain receptacles may be supplied with nylon potting moulds as listed on pages 8 and 9. Potting moulds with location rings are also available separately and are shown in the cable accessories section on page 26. These moulds are intended to be left in position after the compound has cured, Potting compounds which have given satisfactory results are Silcoset 102 and British Paints PR: 1261. @: Amphenol is fully equipped to undertake all aspects of potting. Hermetic Seal Connectors Single hole fixing, solder mounting and square flange receptacles with pin contacts are available with Amphenol one-piece glass-to-metal hermetic seals. Identoseal permanent coding is used for contact identification. Leakage rate is less than -003 cm? (0:1 micron cubic feet) of helium per hour. Hermetic connectors have the lowest silhouette of any connector in the range; thus they are particularly useful in non-hermetic applications where space is at a premium. Hermetic styles are also designed to comply with MIL-C-26482. Connectors with built-in filtering against conducted electro Magnetic interference can be ordered under the series number 482. These are environmentally and electrically compatible with 62GB series. As well as being intermateable they can also be mounted within the same cut-out dimensions.Amphenol 162 GB crimp connectors DESIGNED TO COMPLY WITH MIL-C-26482 AND BS 9522-N001, THE SUCCESSOR TO DEF 5326 Patt.603 Development and manufacture of 162GB miniature bayonet lock connectors has been closely co- ordinated with the solder version. The entire programme has been carried out at Amphenols Whitstable Plant. The precision machinery and measurement control processes used for the produc- tion of 162GB crimp connectors are the same as those used to produce 62GB solder connectors. Full intermountability and intermateability are absolutely guaranteed. 162GB Series crimp connectors share many of the features of 62GB solder connectors. Coupling is achieved with a triple-track bayonet locking system which gives positive alignment on all shell sizes. When connector halves are fully mated there is a definite click, Inspection holes in the coupling ring will then reveal the bayonet pins on the receptacle which are clearly marked in yellow. The Amphenol design means simplified removal of coupling rings for servicing or replacement as they are front demountable. \n addition there is a rough grip heavy duty style ring for arduous conditions and a lever coupling ring which allows extremely close mounting of connectors. The method of sealing is the same as for 62GB connectors; using peripheral seals on the rubber inserts and sealing the mating shells with a square section gasket. Wire sealing is by multiple risers in the rear grommet. Derating Connectors must be derated under the following operating conditions : 1. At elevated temperatures, the current ratings are reduced as shown in the table on page 10. 2. Athigh altitudes, revised voltage ratings become effective as shown on page 11. 3. When connectors to different specifications are inter- mated (e.g. BS 9522-NO01 and MIL-C-26482), the combination must not be operated under conditions more severe than the less stringent clause of either specification. Amphenol 162GB connectors are designed to meet the most stringent requirements of both specifications. Audio Applications Contacts are suitable for tinsel cord applications. Cable Assemblies Amphenol is fully equipped to undertake the preparation of all types of cable assemblies complying with the military vehicles and engineering establishments and fighting vehicles requirements of the Ministry of Defence the Ministry of Environment (Motorways) for motorway contro! equip- ment the Post Office manufacturing code and to the British Standards Institute when applicable to Cable systems. Control procedures carried out in accordance with MIN DEF 05-21. Approval numbers BS 9000, 1043/M and CAA AD/1450/58. Moulded terminations form a specialised service by the company. The process offers such advantages as a waterproof seal between cable and connector back-end, mechanical protection, and a homogeneous joint between moulding and cable. Other Amphenol Products Amphenol products include: printed circuit, rack and panel, microminiature, audio; hermetic and _ r.f. connectors; integrated circuit components; trimming and precision potentiometers; concentric and digital microdials; cable, cable assemblies; fans and blowers; relays and keys; chokes and coils; r.f. coaxial switches. >62GB and DESIGNED TO COMPLY WITH MIL-26482- SCHEDULE OF TESTS REQUIRED FOR 162GB Series awatiFication APPROVAL Tests Brief Description Examination of product Maintenance aging Contact insertion and removal forces Contact retention Contact retention Operating forces Insulation resistance, room temperature Dielectric withstanding voltage (sea level) Dielectric withstanding voltage (altitude) Initial contact resistance Thermal shock Air leakage Air leakage hermetic Insulation resistance at elevated temps (short time} (long time) Durability Vibration Shock Moisture resistance Corrosion Operating forces Contact resistance Crimp only There is no damage to the contacts or connectors after 10 removals and insertions of the contacts. Crimp only Insertion does not exceed 66.7 N (15Ibf.) For individual contacts. Removal does not exceed 44.5N (10Ibf.) Crimp contact Contact locking mechanisms withstands the following minimum axial forces: CONTACT SIZE 20 16 12 FORCE (N) Soo eh 133 (LBF) 20 25 30 Axial displacement does not exceed 0.304mm (0,012in) when pressure is applied from face side. Solder contacts. 4.45N (1 Ibf. per second until specified load reached 66.7N (15 Ibf.) for size 20, 111.0 N (25 Ibf.} for size 16 and 111.0 N (25 Ibf.) for size 12. Torque measurement of mating and un-mating. Ranges from 0.905 Nm. (& Ibf.in.) on shell size 8 to 4.971 Nm. (44 Ibf.in.) on shell size 24 couplings. Unmated connectors tested in accordance with Method 302 test condition B of MIL-STD-202. Mated and unmated connectors tested in accordance with Method 301 of MIL-STD-202. Tested in accordance with Method 105, test condition C of MIL-STD-202. After 30 minutes tested in accordance with Method 301 of MIL-STD-202 unmated and mated. Between 45 and 95 millivolts drop on wire sizes from 24 to 12. Crimp contacts to meet MIL-C-23?16. Unmated connectors tested in accordance with Method 107, condition B of MIL-STD-202 except min temp is 55C. 62GB items no more than 16.387 cm3/hr. (1 atmospheric cu in/hr) No more than 0.0003 cm3 (0.01 micron cubic feet) of helium per hour. Greater than 3 megohms 250 hr at 125C. Greater than 12 megohms 1000 hr at 105C. 500 cycles of coupling and uncoupling. In accordance with Method 204 Condition B of MIL-STD-202. Impulses of 50 G's duration of 11 1 milliseconds In accordance with Method 106 of MIL-STD-202. Salt spray to Method 101 Condition B of MIL-STD-202. From 0.905 Nm. (8 Ib.in.}) for shell size 8 to 4.971 Nm. (44 Ib.in.) for shell size 24. As per contact resistance test of MIL-C-23216.Tests Brief Description fa) Solvent immersion hydraulic fluid (b) Solvent immersion lubricating oil Insert retention Insert retention hermetic Contact retention crimp Contact retention solder, Post examination of product Contact engagement and separation Resistance to test probe damage Solder Conforming to MIL-H-5606 20 hrs Conforming to MiL-H-7808 20 hrs Effective pressure differential of 5 17.0 KN/m? (75 p.s.i.) Effective pressure differential of 13 80.0 KN/m? (200 p.s.i.) Axial loads between 6 6.67 N (15 Ibf.) and 111.2 N (25 Ibf.) Axial loads between 6 6.67 N (15 Ibf.) and 111.2 N (25 Ibf.) Contacts In accordance with MIL-C-23216. In accordance with MIL-C-23216 Protective Covers and Storage Examination of product Operating forces Moisture resistance Corrosion Cover chains tensile strength Air leakage Components suitability after storage and use of recommended protective covers. Measurement of receptacles, plugs and protective covers mating and unmating forces. Crimp contacts to Method 106 of MIL-STD-202 Solder contacts tested installed in heavy condensation. Salt spray to Method 101, condition B of MIL-STD-202. 111.2 N (25 Ibf.) from various directions. 69.0 KN/m2 (10 p.s.i.) applied to inside of protective covers. Crimp Contact Retention Feature Examination of product Maintenance aging (contacts only) Contact retention Test to establish crimp effectiveness Involves repeated insertion/removal of contacts and mating and unmating of connectors. Loads applied in both directions. Connector Assembly Class J Examination of product Thermal shock Water pressure Air leakage In accordance with Method 107 Condition B of MIL-STD-202. Immersion 1.829 m (6 ft.) under water for solder type connectors. Solder receptacles 206.9 KN/m2 (30 p.s.i.) across connectors. Others to Method 112 Condition C, procedure | of MIL-STD-202. anFULLY QUALIFIED TO DEF STAN 59-35 (Part 1) Sec. 3 - SCHEDULE 62GB Series oF fests nequinen FOR QUALIFICATION APPROVAL. General Examination Compatibility (Gauging) Polarisation Engagement and Disengagement Force Contact Hold Force Sealing Contact Resistance Screen Continuity Insulation Resistance lonisation Voltage Proof Soldering Bumping Vibrating Shock Acceleration Rapid Change of Temperature Climatic Fire Risk Fireproofness Damp Heat Long Term Endurance, Mechanical Endurance, High Temperature Shelf Life Mould Growth Salt Mist Dust Robustness of Terminations Contact Retention (in insert) Insert Retention (in shell) Test Prod Damage Impact Immersion Solvent Resistance 0.904Nm 4.067Nm (8.36 Ibf.in.) torque according to shell size. .343N (.077 Ibf.) size 20 981N (.22 Ibf.) size 16 Max leakage: 1 cc per hour at 96.6 KN/m? (14 p.s.i.) differential 5 milliahms max. 5 milliohms max. 5000 megohms at 500 V Unspecified See page 11 As DEF 5011. As DEF 5011. 10 microseconds max intermittency V3 as DEF 5011. 10 microseconds max intermittency $2 as DEF 5011. A2 as DEF 5011. T5 as DEF 5011. D1/H5 as DEF 5011 21 days Not applicable Not applicable H6. 56 days. 500 operations Batch 1: 1,000 hours at 85C carrying the specified current. Batch 2 : 250 hours at 125C, no current per DEF 5011, 3 year test per DEF 5011. per DEF 5011. per DEF 133. 44,5N (10 Ibf.) size 16 22.3N (5 Ibf.) size 20 44.5N (10 Ibf.) 516.5 KN/m2 (75 p.s.i.) .056 Nm (0.5 Ibf.in.} size 20 225 Nm (2 Ibf.in.) size 16 5 impacts from 0.914 m (3 ft.) 1.624 m (5 ft.) water for 1 hour 14 fluids 3KTable of shell styles BOX MOUNTING RECEPTACLES BOX MOUNTING RECEPTACLES SINGLE HOLE FIXING (4-hole Fixing) (4-hole Fixing) RECEPTACLES Page 14& 15 Page 14 & 15) Page 16-17 SHELL a J 42e | 6268 *) 570 | 162GB 62GB a eae THREADED all SHELL | | a! 30T 162GB 62GB | eg GENER por a | 10A (on 62GB 62GB _ cc 1302 GROMMET | TI | | iN 8 SEAL | [ ] 10E 14E 162GB 162GB Ut STRAIN 62GB 62GB RELIEF Q @ CLAMP Q = (For details of | 10F | 14F at aoe, see page 26) 162GB . 162GB | } 8 cea 62GB| 10P 62GB TP 62GB UNSCREENED e JACKETED 10J CABLE CLAMP HERMETIC 8 5 a 62GB 12H 62GB 17H Page 18 & 19 S &> yySOLDER MOUNTED CABLE MOUNTING RECEPTACLES RECEPTACLES PLUGS Page 18 & 19 Page 20 & 21 Page 22 & 23 = CC 1304 CC 1305 62GB Pe) Bit 162GB Ue i Sn 62GB i | | 118 62GB 62GB 6 11E 16E 162GB 162GB 62GB @ = 62GB G@ 11F 7 IGF 6 62GB 11P 62GB 16P 8 62GB 11d 62GB 16J 2 62GB ONLY 62GB 13H Styles marked with CC numbers are approved to DEF STAN 59-35 (Part 1) Sec. 3. wyCO Insert Availability oo 1 Bo * oO =O oo a | Wo * O Ov O -62 GB only 6Oy O/ is oo ie i * O03) SOOF 62 GB only 62 GB only 62 GB only NOTES * shell size range 18-24 Lettering of inserts shown above corresponds to views of front (mating) surface of pin inserts or rear face (cable accessory end) of socket inserts. KEY @ No 16size contacts O No. 20size contacts 10 These insert arrangements are not included in Pattern 105 but are available and listed in MIL-C-26482. Due to the arrangement of contacts in the 14-12 insert arrangement it 1s classified, for current derating, in the CURRENT-AMPS PER CONTACT i SIZE 20 CONTACTS 5 SIZE 16 CONTACTS 7 7 EL a wey BY 4 T oi-8 See - aer-t Telahaten hala teal wn et) =25 0 25 50 AMBIENT TEMPERATURE "C Current-temperature derating curve CURRENT-AMPS PER CONTACT ~ py\ N\ VOLTAGE RATING 2 VOLTAGE RATINGS d.c. a.c. Altitude working working Proof voltage voltage voltage r.m.s. Rating 1 Sea level 700 500 2200 300 mb at20 C 8,500m (27,800 ft) 375 265 1250 44 mb at20 C 20,000 m (66,000 ft.) 200 140 530 162 GB only 22-21t Rating 2 Sea level 1250 900 3250 300 mb at 20C. 8,500 m (27,800 ft) 550 390 1750 44 mb at 20C + Available to special 20,000 m order only \ (66,000 ft) 300 210 7) (Figures in bold type are from DEF STAN 5935 (Part 1) Sec. 3 Patt. 105) NOTES * Because safe working voltages at altitudes above sea-level are dependent upon individual conditions of use, these values are not specified in DEF STAN 59-35 (Part 1) Sect. 3 Patt. 105 but approximate values are FLASHOVER VOLTAGE kW 2 Ne | included here for the guidance of designs. 1 = PSN VOLTAGE RATINGS MN Two categories of voltage rating are specified in ae DEF STAN 59-35 (Part 1) Sec. 3 Patt. 105. VOLTAGE RATING 1 | ! I 20 40 60 80 100 120 140 160 180 (6) (12) (18) (24) (30) (36) (42) (48) (54) ALTITUDE-THOUSANDS OF FEET (METRES) Relationship between flashover voltage and altitude for each voltage rating Rating 1 (700V d.c. working at sea-level) Applicable to the high contact density inserts shown in the upper section of the insert avai, ability diagram above. Rating 2 (1250V d.c. working at sea-level) Applicable to the inserts shown in the lower section of the insert availability diagram. Altitude derating. Information on voltage derating for operation at altitudes above sea-level can be obtained from the flashover voltage.altitude curves on the left. 11Ordering Amphenol 62GB Series Connectors To obtain the specific connector required. write down the cannectar number fram the typical example below. Only inserts shown in the availability chart on p. 10811 can be specified. All connectors are delivered with protective dust covers Shell Style Insert Arrangement 62GB = 1 4 E 18 = 11 P B (044) 7 14-0 O atime Series designation 4 luminium shel Shell size (in sixteenths al aninch) 8,10,172.14,16 18,20, 22,24 Specification key ] Styles oriqinally speci fied in MIL-C-264 Number of contacts : 5 Styles exclusir 2.3,4,5,6.7,8.10,11, 12,16 CT AN 6Q_26 19. 21723. 26,32, 41,55, 61 DEF STAN 59-35 * : ~ | (Part 1)-See. 3. consult factory for availability| Shellstyle 0 Receptacte. wall moun Contact Style My ting P Pins 1 Receptacle, cable S Sockets For hermetic connectors, P2 } a box moun denotes pin contacts with flattened and prerced ter 3 cle solder J minations. P3 denotes pin f je mounting contacts with solder bucket 4t cle. internally terminations hin ed. with cable ac : > ilustrated of hole moun qj. 6 Plug. cable mounting Orientation 7 i plain shell (Omit if normal orientation) hole mounting Keys/Keyways: A*. B, C, , B*, EF. (seep. 31) Inserts: WW, X, Y, 2. (see Environmental code APlain shell ive for new designs solder buck grommet E eal and gram- with grommet Deviations uding 126 (044) Rough grip heavy as plain shell duty couplingring and no gronimet or mut) (046) Box mount lug F As (E) but grom nut (214) Fitted with extension has integral strain relief back shell and strain clamp 4 relief clamp without H Hermetic seal na cable J grommet on F types BOGES: only, J As (E) but with resilient (218) Lever coupling ring. my) GIADG 62) BRE UL 1Op (219) Contacts for flexible unscreened jacketed printed wiring (S7A cable No grommet and 12E only) supplied. i (639) Bright cadmium : plated shells P Potting construction HOW TO ORDER FROM MS CONNECTOR NUMBERS : iplete with potting Connector numbers in the AMPHENOL and MS numbering systems. Only alternative insert orientations are specified in MIL-C-26482 mould which does not include alternative key/keyway orientations. TT Exposed solder buck ets. Threaded shell for MS31 14 E 18-11 E Xx cable Wis 62GB ue 1 4 E 18 =: el B x HOW TO ORDER FROM DEF CONNECTOR NUMBERS Select the connector style by reference to DEF STAN 59-35 (Part 1) Sec. 3 using the code below for identification. Note that the DEF Specification includes only certain connectors fram the table of styles as shown on pp. 8 & 9. Alternative key/keyway orientations are preferred in the DEF Specification to prevent mis-mating. Rotated inserts are, however, permissible where connectors are required to mate with or replace iterns to MIL-C-26482 on existing equipment. 62GB 14E 18-11 P B cc 1304 18-11 P B I I T I Insert P Pin contacts Alternative y Way Style Arrangement S Socket contacts Key/Key see above orientation 12162GB Series designation 162 GB Specification key 1Stylesoriginallyspecified in MIL-C-26482 3Styles exclusive to DEF STAN 59-35 (Part 1) Sec. 3 Shellstyle OReceptacle, wall mounting {1Receptacle, cable mounting 2Receptacle, box mounting 4Receptacle, internally threaded, with cable accessories as illustrated, forsingle hole mounting 6Plug, cable mounting Environmental code EInsert seal and grommet seal with grommet nut (excluding 12E which has plain shelland no grommet nut) FAs (E) but grommet nut hasintegral strain relief clamp TThreaded shell forcable accessories 3 @ Shell Style 6 E ? Ordering Amphenol 162GB Series Connectors Insert Arrangement 22 = Shell size (in sixteenths of anineh) 8,10,12.14.16, 18, 20, 22.24 ee sree Bal Number of contacts 3,5,6, 7 8,10,11,12,19, 21% 23,26,32,36.41,55,61 *Consult factory for availability Contact Style SSockets Orientation (amitif normal orientation) Keys/Keyways:A*, B,C, Beir Inserts: WX. YZ Inactive for new designs Deviations (218) Levercoupling ring (044) Rough grip heavy duty coupling ring (639) Bright cadmium plated shells HOW TO ORDER FROM MS CONNECTOR NUMBERS 36 @ PPins eS P B ery (044) @ Connector numbers in the AMPHENOL and MS numbering systems. Only alternative insert orientations are specified in M|L-C-26482 which does not include alternative key/keyway orientations. MS31 162GB 24 14 13Description Box Mounting Amphenol Part No. Receptacles Military No. \ q MT] 50T 4-hole flange 62 Series DEF STAN 59-35 | | mounting with 62GB-50T etc. (Part 1) Sec. 3 G j threaded shell to CC 1303 || I) accept standard Lut cable accessories 162 Series el 162GB-30T etc. ao ae Thread aa ; 30T ie a z == | 4-hole flange 62 Series r mounting with 62GB-10A4 ete i general duty back 6 I 10A shell. No grommet | | i supplied. a ely X Thread Bell Ae aa 10E 4-hole flange 62 Series MIL-C-26482 = mounting with 62GB. 10E etc MS 3110E etc. | grommetand I grommet nut G | 162 Series MS 312 0E, etc. \ 162GB-10E ete = Lae 10E B gE . 10F 10F 10P 4-hole flange mounting with grommetand grommet nut fitted with integral strain relief clamp. 4-hole flange mounting for patting. Shell size B only. Cable entry dia, max. 0.267in (6.8) 62 Series 62GB-10F ete. 162 Series 162GB-10F etc 62 Series 62GB-10F8-2 MIL-C-26482 MS 37170F etc MS 312 0F, etc. (9) MN 10J 4-hole flange mounting with clamp for unscreened jacketed cable, No grommet supplied. 62 Series 62GB-10J etc. 14 12E 12E 4-hole flange mounting with plain shell for direct wiring to exposed solder buckets. Film wire terminations available on 62 Series as deviation (219). 162 Series style has integral grommet. 62 Series 62GB-12E etc, 162 Series 162GB-12E etc. MIL-C-26482 MS 3112E etc. MS 312 2E, etc. sliDimensions and Mounting Details 62/162 OVERALL MATED DIMENSIONS Add the two relevant plug and receptacle overall : ' kK dimensions and deduct 0.365 (9.271mm) for shell Panel K sizes 20) 22, 24 Ww { 42E 0.303 (7.696mm) for all Receptacle i (219) other sizes Shell MINATIONS When receptacles are i, ; 12E(219) FILM WI RE DE MOURA Cae Panel piercing Dimensions rearface of the panel, details on Shell the maximum value size J K dia. for dimension W Page 19 as 12H in in must not be mm mm exceeded otherwise the receptacte can- 08 | 0,173/0.133 | 0.030/0.028 ae Rea es 3 4.395/3.38 0.76/0.7 Bee 10 0-173/0-133 | 0-030/0-028 4395/3238 | 0-76 /0-7 12 0:173/0-133 | 0-030/0-028 4:390/338 | O76 /O-7 Se Panel thickness with screw head W max. 14 0-173/0-133 | 0-030/0-028 E pia : ie 4:395/3-38 | 0-76 /0-7 Ralicsi He Shell size 16 | 0-173/0-133 | 0-030/0-028 5 Shetisiee inne: mm. 395/338 O76 /O7 18 | 0-173/0:133] 0030/0028 08-18 0.100 20-24 0.210 en 4-395/3-38 | 0-76 /0-7 2.540 5.330 A Overall Length Max. L Shell Lengths Thread Shell (62) (162) (62) (162) (62) (162) (62) (162) x Size | 50T 30T 10J 10A 10E 10E 10F 10F 12E 12E 12 12E fOAGHTy in in in in in in in in in in in in mm mm mm mir mn mm mm mm mm mim Mr mim 08 0-878 1-286 1-846 1-624 1-281 1:320 1-762 1-759 0-978 1-286 0-800 O-S17 3-28 UNEF 24-84 32-665 | 46-89 41-25 32-54 3353 44-755 | 44-68 24:84 32-665 | 20:32 2729 10 0-978 1:286 1-846 1:624 1281 1-320 1762 4+:769 O-gs7s8 1-286 800 0-917 -24 NEF 24-84 32-665 | 46-89 1+25 32:54 33:53 44-755 | 44-68 24-84 32-565 | 2032 229 12 0:978 1-286 1947 1624 1-281 1-320 1-762 1-759 0-978 1:286 0-800 0-917 3-20 UNEF 24:84 32-665 | 49-45 1-25 32-54 33-53 44-755 | 44-68 24-84 32665 | 2032 23-29 14 0-978 1:286 2147 1-624 1-281 1-320 1-736 4-733 0-978 1-286 0-800 O91 7 @-20 UNEF 24-04 32:665 | 54-535 | 41-25 3254 33:53 44-095 | 44-02 24-84 32665 | 20932 2a29 16 o-978 1-286 2-347 1-624 1-281 4-320 1-876 1-873 0-978 1-286 0-800 0-917 1-20 UNEF 24-84 32-665 | 59:61 4125 3254 33:53 47-65 47-575 | 24-84 S2:665 | 2032 Porea 18 O-978 1-286 2-547 1-624 1-281 1-320 1-876 1-873 O-978 1-286 0-800 0-917 144-18 NEF 24-84 32-665 | 64-695 | 41-25 32-54 33-53 47-65 47-575 | 24:84 32-665 | 20-32 23-29 20 1-048 1-348 2-831 1-687 1-383 1-382 2-118 2-415 1-048 1-34 0-875 0-980 134-18 NEF 26-62 34-24 71-905 | 42-85 35-13 35-10 53-80 53-72 2662 34:24 22-295 | 24-89 22 7-048 1-348 3-031 1-687 1383 1-382 2-118 2-115 1-048 1-348 0-875. 0-980 1ye-18 NEF 2662 34-24 76-99 42-85 35:13 35-10 53-80 5372 2662 34-24 22-925 | 24:89 24 1-048 1-348 3-074 1-730 1:383 1:382 2-250 2-247 1048 1-348 0-875 1:023 135-18 NEF 26-62 34-24 78-08 49-94 85-13 35:10 BYe1H 57-075 | 26:62 34-24 22225 | 29995 e Flange Flange Flange Flange Mtg. Cable Shell Cable . Thick- Dimen- Hole Holes Flange sleeve ext. Entry ness sion centres dia. Loca- Overall rear int. dia. dia. +0-005 max. TR +0-005 tion diameter dia. Thread max, (40-127) sq. (+0127) 40-005 max. 10-005 min. max, 0-002 (0-127) (0:127) closed free (0-051) Shell B Cc E G H x Z Size 50T 30T 12E 10E 1OF 10J 10A | 10F only 10J 10J in in in in in in in in in in in in in in in in mm mm mm mm mmr mm mm mm mm mm mm mm mm mm mm mm 08 0-062 | 0-817) 0-594 | 0-120] 0:445 |] 0-434 ] 0-434 ] 0-434 | 0-561 0-828 | 0-561 0-561 0-156 7-28 UNEF 0-473 | 0-168] 0-230 1-575 120-75 |15-09 3-05 111-3 11-02 [11-02 411-02 4-25 [21-03 |14:25 | 14-25 3:96 12-015 | 4-275] 5-84 10 0-062 |) 0:942) 0-719 | 0-120] 0:445) 0:558 | 0-558 | 0-558 | 0-686 | 0-891 0-686 | 0-686) 0-188 5-24 NEF 0-590 | 0-205] 0-312 1-575 |23:925 | 18:26 S205 lira 14-17 [14-17 [14-17 [17-425 [22-63 J17-425 17-425 | 4-775 14:99 6205 | 7-925 12 0:062| 1-036] 0-812 | 0-120| 0-445] 0-683 | 0-683 | 0-683 | 0-811 1-016 | 0-811 0-811 0-312 44-24 NEF 0-750 | 0-338] 0-442 1-575 | 26-315 | 20:62 SH Bee eas 1735 1735 [17-35 (20:60 725-805 F20-60 |20-60 #925 19-05 8-585 }71-23 14 0-062] 1-130] 0-906 | 0-120] 0-445) 0-808 | 0-808 | 0-808 | 0-936 | 1:141 | 0-936 | 0-936] 0-375 | 12-20 UNEF 0-875 | 0-416] 0-539 V575 [2670 [23-10 3:05 11:3 20:52 120-52 (20:52 [23-775 128-98 So ear | eae 22225 110-565 | 1369 16 0-062 | 1:223 | 0-969 | 0-120] 0-445] 0-933 | 0-933 | 0-933 | 1:061 | 1-203] 1-061 | 1-061 | 0-500 | 43-20 UNEF 1-000 | 0-550| 0-616 1:575 131-065 |24+61 3-05 less 237 23-70 [23-70 | 26-975 |90-555 126-975 |} 26-975 |12-7 254 1397 |15>65 18 0-062] 1:317 | 1-062 | 0-120) 0-445] 1-057 | 1-057 | 1-057 | 1:186] 1-426] 1:186) 1:186| 0-625 | 14-18 NEF 1125 | 0-600] 0-672 575 (33-45 | 26:575 | 3-05 11:3 26-85 |26-85 |26-85 |30-12 |36-22 [30:12 [30:12 5875 Z7E575 15:24 | 17-07 20 G-080] 1-442) 1:156 | 0-120) 0-555] 1:182 | 1:182 |] 1-182 | 1-311 | 1-426] 1-311] 1-311 | 0-625 | 14-18 NEF 1-250 | 0-635| 0-747 2-08 |36-625 | 29-36 3:05 114-095 |20-02 [30-02 |30-02 [33-30 [35-22 [33:30 |33-30 | 15-875 31-75 (16:13 |18-975 22 0-080) 1:567] 1:250 | 0-120] 0-555] 1:307 | 1:307 | 1:307 | 1-436 | 1-567] 1:436| 1-436] 0-750 | 144-18 NEF 1-375 | 0-670] 0-846 203 139-80 |31-75 3-05 |14-095 [33-20 |32-20 |33-20 |36-47 [39-80 [36-47 [36-47 |19-05 34:925 [17-02 | 21-49 24 0-080) 1-692] 1-375 | 0-147] 0-590] 1-432 | 1-432 | 1-432] 1-561 | 1-735] 1-561 | 1-561 | 0-800 | 144-18 NEF 1-500 | O-740/ 0-894 2-03 [42-98 [34-925 | 3-735 )14-985 |36-37 [36-37 |36-37 |39-65 [44-07 [39-65 |39-65 |20-32 38-1 18-80 | 22-71 15Single Hole Fixing Receptacles Description Amphenol Part No. Military No. 6 ~ Thread Single hole fixing 62 Series DEF STAN 59-35 ee with plain shell for 62GB-57A etc. (Part 1) Sec. 3 direct wiring to CC 1301 exposed solder buckets. Has panel 57A O-ring seal. Film M wire terminations available as deviation (219). Single hole fixing 62 . X Thread plain shell for direct od way wiring to exposed i solder buckets. 5016 Reduced diameter M 5005 flange with panel O' ring seal. Sizes 5024 8,10, 12 and 14 only. 50176 Solder buckets. Size 10 only. 5005 P.C. pins. Size 10 only. 5024 Solder buckets. Size 8, 12,& 14 anly. Single hole fixing 62 Series MIL-C-26482 _-% Thread 14E with grommet and 62GB-14E etc. MS 3114E etc. grommet nut. Has DEF STAN 59-35 panel 'O ring seal. (Part 1) Sec. 3 Cc 1302 162 Series 162GB-14E etc. 14E X Thread Single hole fixing 62 Series MIL-C-26482 es fee for potting. 62GB-17P etc. MS 3114P etc. Supplied complete with potting mould, locating ring and panel O' ring seal. Y|M 17P Xx Thread Single hole fixing 62 Series MIL-C-26482 | with grommet and 62GB-14F etc. MS 3114F grommet nut fitted c with integral strain relief clamp. Has MIY panel O'ring seal. 162 Series 162GB-14F etc. 14F 16 SyDimensions and Mounting Details 62/162 OVERALL MATED DIMENSIONS Add the two relevant plug and receptacle overall SrA C218) dimensions and deduct 0.365 (9.271mm) for shell sizes 20, 22, 24 FILM WIRE TERMINATIONS Shell ct 0.303 (7.696mm) for all ee ry K other sizes In in mim mm ' R 08 0.173/0.133 | 0.030/0.028 | 4,995/3.38 0.76/0.7 L 10 0:173/0-133 | 0-030/0-028 Hf 4:395/3:38 | O76 /0-7 12 0-173/0-133 | 0-030/0-028 aig 4-395/3-38 | 0-76 /O-7 14 0-173/0-123 | 0-030/0-028 4395/3-38 | 0-76 /0-7 16 0-173/0-133 | 0-030/0-028 4-395/338 O76 (0-7 48 | 0-173/0-133 | 0-030/0-028 57A 4395/3398 | O76 (0-7 (219) 5016 , 5005 5024 SINGLE HOLE FIXING RECEPTACLES PANEL PIERCING DETAILS Shell |] Mounting | Mounting) Diameter Panel thickness pe size holedia, | holecrs. | across flat} min. max. Overall ae MD 0-005 min, 0-005 (40:127) (40-127) . (62) (162) (62) (162) Shell BTA R $ N . K k size 14E 14E 14F 14F 17P 5024 5016 5005 in in in in in in in in in in in in in mm mim men mm mim mm mm mm mm mm mim mm mm 8 0-572 1-250 0-540 0-062 0-125 08 1-344 | 1-355] 1-762] 1-759) 1-391 0-978 14-53 34-75 1S-72 bebe 3175 34-14 34-42 |44-75 | 44-68 | 35-33 | 24-84 10 0-697 1-359 0-665 0-062 0-125 10 1-344 | 1-355 | 1-762] 1-759] 1-391 0-978 1-067 0-887 17-70 34:52 16-89 1575 3-175 34:14 134-42 |44-75 [144-68 195-33. 124-84 27-61 2253 12 0-885 1531 0-828 0-062 0125 The 1-344] 1-355 | 1-762] 1-759] 1:391 0-978 = = 22:48 38-885 21-03 1575 21e5 3414 34-42? [44-75 |4468 195-33 | 24-84 14 1-010 1-656 0-952 0-062 0-125 14 1:344.] 1-355] 1-736] 1:733-) 1-391 0-978 = = 25-65 42:06 24-18 1-575 3-175 34:14 134-42 |44:095) 44-02 135-39 | 24-84 16 1135 1-781 1-076 0-062 0-125 16 1-344 | 1-355] 1-876] 1:873| 1-391] 0-978 _ = 28-83 45:24 27-33 1575 | 3-175 34-14 [34-42 [47-65 |44-575/35-33 | 24-84 18 1-260 1-891 1-201 0-062 0-125 18 1-344 | 1-355 | 1:876) 1:873) 1:391] 0-978 - 32-00 48-03 30:50 ate Be 03 94-14 (94-42 147-65 | 44-575 |3533 | 24-84 20 1-385 2-031 1-326 0-062 0-250 20 1-576 | 1:576 | 2:118) 2-105) 1-641] 1-048 = _ 3518 51-59 33:68 S25 635 40:03 |40-03 153-8 63-47 |41-68 | 26-62 22 1510 2156 1-451 0-062 0-250 22 1-576 | 1-576 | 2-118] 2-105) 1-644 1:048 _ - 38-35 5476 36:855 eis 6-35 40-03 [40-03 [53:8 53:47 |41-68 126-62 24 1-635 Qa 1-576 0-062 0-250 24 1:609 | 1-609 | 2-250 | 2-247 | 1-674 1-048 4)-45 57835 40-03 1b 6-35 40-87 |40-87 b7'15 [57075 [42-52 | 20:62 Flange Flange Flange | Mounting Overall rear Cable Fixing Fixing nut thread Thread Shell Cable thickness |dimensions | Dia. flange dia. (max.) sleeve nut flat ext. entry - 0-005 max. max. location int. dia. ASF 4 0-000 dia. dia. (40-127) sq 0-005 +0-005 0:005 max, min. (0-127) (+40127) (0-127) B Cc D F G H L Xx M ie Zz 5016 Shell | 14E 14F BTA 5005 Size | 57A17P 5024 14E 14F 17P 14F 17P in in in in in in in in in in in in mm mm mm mm mm mm mm mm mm mm mm mm 08 0-117 0-942 0-830 0-706 0-713 0-828 0-572 0-156 0-750 y-24 NEF 0-527 0-473 0-260 2:97 2393 2108 17-33 18:11 2103 14-53 396 1905 13:3 12-025 6-60 10 O-117 1-067 0-88) 0-706 0-838 0-891 0-666 0-188 0-875 {4-24 NEF 0-652 0-590 0-463 2O7, 27-10 2239 AF 9S 21:29 22-63 16-915 4-775 22225 1656 14:99 11-76 12 O-117 1:255 1-130 0-706 0-963 1-016 0-822 0-312 1-062 3-20 UNEF 0-815 0-750 0-557 297 31-875 28:70 17-93 24:46 25:805 2088 7925 26-975 20:70 19-05 14-15 14 0-117 1-380 1-260 0-706 1:088 1-141 0-907 0-375 1-187 1=20 UNEF 0-939 0-875 0-590 2-97 35-05 32-00 17:93 27625 28-97 2306 9-525 30-15 23-85 22225 14-99 16 O-117 1-505 _ 0-706 1:213 1:203 1-040 0-500 1-312 14-18 NEF 1-063 1-000 0-713 2:97 38:225 =_ 1793 30-81 30-555 26415 12:7 33-32 27-00 2540 18-71 18 0-117 1-630 _ 0-706 1-338 1-426 1-165 0-625 1-437 14-18 NEF 1-188 1-725 0-835 2:97 41:40 _ 17:93 33975 36:22 2959 19-875 36-50 30-175 28-575 27:21 20 0-148 a7 0-894 1:463 1-426 1-285 0-625 1:562 12-18 NEF 1-313 1-250 1-015 3:76 4615 - 22F 37-16 36:22 32:64 19-875 38-675 33-35 31:75 25:78 22 0-148 1-942 _ 0-894 1-588 1-567 1-400 0-750 1-687 13-18 NEF 1-438 1-375 1-015 3:76 49-33 _- 22-71 40-325 3980 3556 19-05 42-85 36-53 34925 2578 24 0-148 2-067 0:927 1713 1-735 1-540 0-800 1-812 18-18 NEF 1-563 1-500 1-265 3:76 52:50 _- 23-55 43-5) 44:07 39-115 2032 46-05 39:70 38-10 32:13 17Hermetic Seal Receptacles Description Amphenol Part No. Military No. e X Thread 4eef 17H Single hole fixing with pin contacts in one piece glass-to- metal seal. Exposed solder buckets or flattened and pierced pins. Has panel O' ring seal. 62 Series 62GB-17H etc \ MIL-C-26482 MS 3114H etc. 13H Solder mounting with plain shell and exposed solder buckets or flattened and pierced pins. 62 Series 62GB-13H etc: MIL-C-26482 MS 3113H etc 12H 4-hole square mounting with exposed solder buckets or flattened and pierced pins. 62 Series 62GB-12H etc. 1862/162 OVERALL MATED DIMENSIONS Add the two relevant plug and receptacle overall dimensions and deduct Dimensions and Mounting Details 0.365 (9.271mm) for shell sizes 20, 22, 24 0.303 (7.696mm) for all other sizes E dia holes @ PANEL PIERCING DETAILS Mounting hole dia Hole | Mounting] Fixing |Dimension| Panel | Panel thickness fs a + 0-005 Crs: hole ers hole | across flat | thick min. max, } 1 (40/127) min. dia ; 0-005 ness Shell 0 (0127) | over eize screw 13 H R 5 N Ww K 12H 13H 17H 12H 17H in in in in in in in mm mm Ten mm mir mm Min m 08 0-565] 0-578 1-250 0-120 0-540 0-100 | 0-062 | 0-125 7 14:47 14-68 31-75 3:05 1372 254 57 oS 10 0-695] 0-68 1355 0-120 0-665 0-100 | 0-062 | 0-125 17-53 1745 34:52 3-05 16-89 2.84 i-5y 278 12 0-864) 0-797 1-531 0-120 0-828 0-100 | 0-062 | 1-125 21-84 | 20-24 38-89 305 21:03 2-54 Lhe 3-18 14 0-989] 0-922 1:656 0-120 0-952 0-100 | 0-062 | 0-125 25:15 | 23-42 2-06 3:05 24-18 2:54 1357 3-18 i 16 113) 1:047 1:781 0-120 1-076 0-100 | 0-062 | 0-125 24-19 at ( 264 1-57 318 18 : 0-100 | 0-062 | 0-125 48-0 2-54 | 1-57 3:18 D 12H 20 za 0-210 | 0-062 | 0-250 Baas be 3 3: 1-57 6-35 22 2 : 0-210 | 0:062 | 0-250 Bx 4-7 05 5:33 157 6-35 24 1-615] 1-516 2-277 0-147 0-210 | 0-062 | 0-250 41-15 |:38-51 57-84 4-81 6:33 1:57 6:35 E dia Overall length Flange thickness | Flange dimension Mounting flange Fixing Overall Overall Thread Shell Fixing nut max max location nut rear Shell flat ext. dia. thread Shell AIF dia lenath 0-000 max size max max 0-005 A 6 C F L G J (-0-127) ee x 12H 13H 17H 12H 13H 17H 12H 13H 17H 12H 13H 17H 13H 13H M in in in in in in in in in in in in in in in in in mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm 0-828 0-828 0-036 o-094 O-817 | 0-630 0-942 0-426 0-706 0-750) 0-562) O-592 0-527 O-473 24 NEF 21-03 21:03 0-91 2-39 20-83 16-00 23-93 10-82 17-93 19-05 14:27 15:04 13:39 12:01 0-828 0-828 0-036 0-094 0-942 0-755 1-067 0-426 0-706 0-875 0-672 0-592 0-652 0-590 ,-24 NEF 21:03 21-03 O91 239 23-88 19-18 2710 1082 17-93 22-23 17-07 15:04 16-56 14-99 0-828 0-828 0-036 0-094 1-036 | 0-849 1-255 0-426 0-706 1-062 0-781 0-592 0-815 0-750 4-20 UNEF 21-03 21:03 0-062 0-91 239 26-42 2156 31-88 0-505 | 10-82 17-33 26-97 1984 15-04 2070 19-05 0-828 0-828 1:57 0-036 0-094 1-130 0-974 1-380 | 12-83 0-426 0-706 1187 | 0-906] 0-592 0-939 0-875 1-20 UNEF 21-03 21:03 o-91 2:39 28:70 24:74 35:05 1082 17-93 30:15 2301 15:04 2385 22:23 0-828 0-828 0-036 0-094 1-223 1-099 1-505 0-426 0-706 1:312 1-031 0-592 1-063 1-000 14-18 NEF 21:03 21-03 O91 2-39 30-99 27-91 38:23 10-82 17:93 33:32 26:19 15-04 27-00 25:40 0-828 0-828 0-036 0-094 1317 1:223 1630 0-426 0-706 1-437 1-156 0-592 1-188 1-126 11-18 NEF 21-03 21:03 091 2:39 33:53 31-06 41-40 10-82 17-93 36-50 2936 15-04 30:18 28:58 O-s90 0-890 0-036 0-125 1-442 1-317 1817 0-488 0-894 1-562 1-250 0-654 1-313 1-250 13-18 NEF 22:61 22:61 O91 3:18 36-58 | 33-45 | 46-15 0-654 | 12-40 22:71 39-67 31:75 16-61 33:35 30:75 0-890 0-890) 0-093 0-036 0-125 1:567 1-443 1-942 | 1661 0-438 o-894 1-687 1-375 0-686 1-438 1375 14-18 NEF 22-61 22:61 2:36 O91 3-18 39-88 | 3665 | 49:33 12-40 22-71 42-85 34-93 16-61 36:53 34-93 0-890 0-890 0-036 0-125 1-692 1-567 2-067 0-686 0-521 0-927 1812 1-500 0-719 1-563 1-500 1-18 NEF 2261 22:61 o-91 318 42-93 39-80 52:50 17-42 13:23 23-55 46-02 38-10 18:26 39:70 38:10 19Cable Mounting Description Amphenol Part No. Receptacles Military No. r _A ; 51T Basic cable mounting receptacle 62 Series 62GB-51T etc DEF STAN 59-35 =} (Part 1) Sec. 3 T Tl TH ol with threaded shell cc 1304 | iI \| to accept standard a Y cable accessories. 162 Series | Hii 162GB-31T etc. ll = _ 1 BU fF Thread < | = ret 31T eee eee Cable mounting 62 Series receptacle with 62GB-11A etc. general duty back shell. No grommet G Y 1A supplied, a ye | xX Thread Cable mountina 62 Series MIL-C-26482 11E 11E receptacle with grommet and grommet nut, 62GB-11E etc. 162 Series 162GB-11Eetc MS 3111E etc. MS 3127E, etc. aac Sel 11F G : al | i TE ne ae JS H eye ea A ah i A e zt y 1P Cable mounting receptacle with grommet and and grommet nut fitted with integral strainrellef clamp 62 Series 62GB-11F etc. 162 Series 162GB-11 Fetc. MIL-C-26482 MS 3111F, etc. MS 3121F, etc. For potted seal, supplied complete with detachable potting mould and location ring 62 Series 62GB-11P etc. MIL-C-26482 MS 3111P etc. a 20 11J =< With cable clamp for unscreened jacketed cable. No grommet supplied. 62 Series 62GB-11J etc. rs-62/162 OVERALL MATED DIMENSIONS Add the two relevant plug and receptacle overall 0.365 for shell sizes dimensions and deduct (9.271) 20,22,24 0.303 for all other sizes (7.696) Dimensions and Mounting Details Shell Size 08 10 20 ae 24 B1T 21 in in mm mm O-978 | 1-286 24-84 | 32-665 0-978 | 1-286 24-84 | 32-665 0-978 | 1-286 24-84 | 32-665 0-978 | 1-286 24-84 32-665 0-978 | 1-286 24-84 | 92-665 o-978 | 1-286 24-84 | 32-665 1-048 | 1-348 2662 | 34:24 1-048 | 1-348 26-62 | 34-24 1-048 | 1-348 26-62 | 34-24 A Overall Length max, Tt 11A in in mm mm 1-846 1-624 46-89 41-25 1-846 1-624 46-89 41-25 1-947 1-624 49.45 41-25 2-147 1-624 54-535 | 41-25 2-347 1-624 5961 4125 2-547 1-624 64-695 | 41-25 2-831 1-687 71-905 | 4285 3-031 1-687 76:99 4285 3-074 1-730 78-03 4394 (62) (162) VIE TLE in in mim mm 1-281 1-320 32-54 3353 1-281 1320 32-54 3353 1-281 1320 3254 33-53 1-281 1:320 3254 3$53 1-281 1:320 3254 3253 1-281 1-320 32-54 39:53 1-383 1-382 35-13 35:10 1-383 1-382 25213 35:10 1-383 1:382 35-13 35:10 (62) (162) ViF 11F in mm mm 1-762 1-759 44-75 44-68 1-762 PSS 44-75 | 44-68 1-762 1-759 44-75 | 44-68 1-736 ese, 44-095 | 44-02 1-876 1-873 47-65 | 47-575 1876 1873 5 47-875 2-118 2-115 5380 ba-72 118 2-715 80 5372 250 2-247 15 57-07 Thread x 117A only 3-28 UNEF 3-24 NEF 3-20 UNEF 2-20 UNEF 1-20 UNEF 14-18 NEF 135-18 NEF 17-18 NEF Tye18 NEF 08 20 22 24 Shell size Flange thickness +0-005 (40-127) B in mm 0-094 2-39 0-094 2-39 0-094 239 0-094 239 0-094 259 0-094 239 0-104/0-100 264 (2:55 0-104/0-100 264 /265 0-104/0-100 2:64 /2-55 Flange dimensions max. sq Cc in mms O817 2075 0-942 23-925 1-036 26-315 1:130 28-70 1-223 31-065 Te 1-442 3663 1-567 39-80 1-692 42-98 Flange location +0-005 (40-127) F T1F in in eT mn 0-415 0-828 0-54 21-03 0-415 0-891 0-54 22:63 O45 1:016 Q-54 25-805 0-415 14141 10-54 28-97 0-415 1-203 10-54 30-555 0-415 1-426 10-54 3622 0535 426 og: 3622 0-535 567 1359 3980 0-560/ 0-574 735 14-225/14-58 4a-O7 Overall rear diameter Max. G TIE, 114 and11J mn mm 0-561 14-25 0-686 17-425 0-811 20-60: 0-936 2a 7D 1/061 2695 1186 30-125 F314 3330 1-436 36:745 1-561 39:65 ere] Sone SoHo sows _ Thread 517,317 e728. UNEF 3-24 NEF 1124 NEF 4-20 UNEF 18-20 UNEF 14,-18 NEF 1-418 NEF 18,-18 NEF 15% -18 NEF Shell ext. dia. max im mitt 0473 12-025 0-590 14-99 0-750 19-05 0-875 22-226 1-000 25-40 Cable entry diameter z min closed 11d in nie 0-168 0-205 20% 0-338 BOB 0-416 TOBE 0-550 1a.a7 0-600 1a 0-635 16-14 0-670 17-02 0-740 18-80 Max free 11d in nie 0:230 he Bat 0-312 7925 0-442 11:23 0-533 0-616 16h 0-672 17-07 0-747 0.846 21-49 0-894 22:71 21Description Amphenol Part No. Plugs Military No. ae A 56T Basic plug with threaded shellto 62 Series 62GB-56T etc. DEF STAN 59-35 A (Part 1) Sec. 3 16E 16E and grammet nut. accept standard CC 1305 cable accessories. 162 Series wii) i 162GB-36T etc. os Plug with general 62 Series duty backshell. 62GB-16A etc. No grommet provided. ys 16A Box-mounting plug. 62 Series A Available for shell 62GB-56T16-XX (046) size 16: other sizes 56T to special order, Cable accessories | (046) cannot be fitted. Plug with grommet 62 Series MIL-C-26482 62GB-16E etc 162 Series 162GB-16E etc, MS 3116E etc. MS3126E, etc. E | 5 16F 16F Plug with grommet and grommet nut fitted with integral strain relief clamp. 62 Series 62GB-16F etc. 162 Series 162GB-16F etc. MIL-C-26482 MS 3116F etc. MS3126F, ete. 16P For potted seal, supplied complete with detachable potting mould and location ring. 62 Series 62GB-16P etc. MIL-C-26482 MS$3116P, etc. 22 16J Plug with cable clamp for unscreened jacketed cable. No grommet supplied, 62 Series 62GB-16J etc.Dimensions and Mounting Details o6T (046) | oe Thread L Overall length (max.) A Shell (62) | (162) | Ser size 56T 36T 16F 164 16P 16J 16E 16E (046) in in n in in in in in in mm mm mm mm mm mm mim mm mm 08 0-976| 1-277] 1-752] 1614] 1-306) 1-836] 1-281] 1-310 a 24-79 132-44 144-50 |40-995/33-17 |46-635 |32-54 133-27 62/162 OVERALL MATED DIMENSIONS 10 0-976) 1-277] 1752] 1-614] 1-41571 1-836] 1-281 ] 1-310 19 aes i oy bee se ee eee oe ae Add the two relevant plug and receptacle overall 24:79 |32-44 44-50 [40-995 [35-15 |49-20 |32-54 |33-27 Gimensionsend Gaduct O.see 72m tor wre 14 0-976] 1-277) 1-726] 1-614] 1-384 | 2-137] 1-281 | 1-310 ne 24-79 [32-44 |43-84 |40-:995 135-15 [54-28 [32-54 |33-27 16 | 0-976] 1-277| 1-866] 1-614] 1-384] 2-337] 1-281 | 1-310 | 1-150 0.303 (7.696mm) for all 24:79 |32-44 [47-40 [40-995 135-15 [59-36 |32-54 [33-27 2921 other sizes 18 0-976 | 1-277] 1:866] 1-614] 1-384 | 2-537 | 1-281 1-310 24-79 |32-44 |47-40 140-995 }35-:15 |64-45 |32-54 |33-27 20 0-976] 1:277 | 2:045| 1-614] 1:539] 2-758 | 1:281 |] 1-310 24-79 |32-44 [51-94 |40:995|39:09 |70-05 [32-54 [33-27 22. 0O-976| 1-277 | 2-045] 1-614] 1-539] 2-958 | 1-281 | 1-310 24:79 | 32-44 151-94 ]40:995]39-09 75:13 [32:54 |33:27 24 O-976| 1-277; 2178] 1-658) 1-602) 3-002 | 1-281 | 1-310 _ 24-79 | 32-44 155-32 [42-11 ]40:69 |76:25 [32:54 |33-27 Overall | Coupling Overall rear Cable 56T set | For shell size 16, 56T Cable entry dia, ring dia, dia. max, sleeve (046) (046) | (046) only, fixing threads dia, max, max, int. dia. Flange | Holecrs| 632 NC. +0-005 | dimension (+0-127) max. Thread c Y G H J K L z min. max. Shell 16E, 164 567, 36T 164 min. closed free size and 16J 16F 16P 16F 16P 16J 16J in in in in in in in in in in in mm mm mm mm mm mm mm mm mm mm mm 08 0-750 0-750 0-561 0828 0-572 0-156 _ =< ve-28 UNEF 428 UNEF 0-260 0-168 0-230 19-05 19-05 14-25 2103 14-53 3-86 660 A275 564 10 0-859 0-859 0-686 0-891 0-666 0-188 _ _ we24 NEF $24 NEF 0-463 0-205 0-312 2182 21-82 7-425 22-63 16915 4775 1176 5-205 7925 12 4-031 1-031 0-811 1016 0-822 0-312 = = 34-24 NEF 3-20 UNEF | 0-577 0-388 0:442 26-19 26-19 20-60 25-805 20-88 75926. 14:15 :585 11:23 14 1-156 1-156 0-936 1-141 0-907 0-375 _ =_ 32-20 UNEF $-20 UNEF 0-590 0-416 0-539 29-36 29-36 23-775 28-97 23-04 9-525 14-99 10:565 13:69 16 1-281" 1:281 1-061 1-203 1-040 0-500 317 1:000 | 28-20 UNEF}| 1-20 UNEF | 0-713 0-550 0-616 32-54 32-54 26-95 30:555 | 26-415 12-70 33-45 25-4 18-11 13-97 1565 18 1-391 1-391 1-186 1-426 1-165 0-625 145-18 NEF |1:18 NEF 0-835 0-600 0-672 3533 35:33 30-125 36:22 29-59 15-875 2221 15-24 17-07 20 1-531 1-531 1-311 1-426 1-285 0-625 _ 17-18 NEF |133,-18 NEF 1-015 0-635 0-747 38-89 38-89 33:30 36-22 32-64 15875 25-78 16-13 18-975 22 1-656 1-656 1-436 1-567 1-400 0-750 = _ 14-18 NEF |17%-18 NEF 1-015 0-670 0-846 42-06 42-06 36-745 39-80 35-56 19:05 2578 1702 2149 24 PITT 1:777 1561 1:735 1540: 0-800 _ _ 1y7e-18 NEF |15%-18 NEF 1-265 0-740 0-894 45-135 45-135 39:65 44-07 39-115 20-32 3213 18-80 22-71 23Plugs with optional coupling rings Description Amphenol Part No. Heavy duty coupling 62 Series (044) ring. Available for any 62GB-XXXXX-XX (044) of the plugs listed nM on page 22 Hil To order complete TH 7) assembly, add : Ail deviation (044) to 162 Series ill (044) connector number. 162GB-XXXXX-XX (044) A Me ; 4 eextMax = Lever coupling ring. 62 Series (218) Mating and unmating 62GB-XXXXX-XX (218) only requires 120 movement. Available in shell size C | 14 and 16 only. Other | | sizes to special order. | | 162 Series } 162GB-XXXXX-XX (218) (218) CONNECTORS FOR TINSEL CORDAGE A Max Audio plug. Suitable for tinsel cord. Available in shell size 10 only. H 0506 162 Series 162GB-0506-10-6PX 162GB-0506-10-7PX [a A Max Audio receptacle. Suitable for tinsel cord. A a Available in shell size 10 only. B HI y 5001 | + 162 Series WU 162GB-5001-10-7SX SPA eee a 24HEAVY DUTY Dimensions and Mounting Details COUPLING RINGS . WwW ae! Shell Over Size max, Ww (044) nm mm 08 0-870 10 O-979 12 1 151 29-235 14 1:276 32-41 16 1-401 18 20 22 24 LEVER COUPLING RINGS Shell Amax. Cc max. in. in. size mm, mm, 14 1-444 0-787 3667 19:98 16 1-444 o-844 3667 21:43 AUDIO CONNECTORS FOR TINSEL CORD A max. B Shell 162GB-0506-10-6PX 1626B-5001-10-75X dia, max cable outlet min. size 162GB-0506-10-7PX in in in in mm mm mim mm 10 2-375 2-75 0-875 0-276 60 325 6985 22225 7-01 25Cable Accessories Suitable for all externally threaded Plug or Receptacle shells. Description Amphenol Part No. 584 214 Grommet seal and nut. Provides an environmental seal for the exposed solder buckets in the openback class T shells. Grommet nut only for 162 Series 62 Series 62GB-584-XX-XP or S* 162 Series 162GB-214-XXTt For shell sizes 08-24 respectively. X Thread 776 A type General duty shell to accept conduit, AN 3057 or MS 3057 A cable clamps and heat shrink sleeves, 62 Series 62GB-776-XxXt 585 129 Grommet and nut with strain relief clamp. The clamp prevents the flexing of the wires in the immediate vicinity of the risers, so avoiding the risk of leaks. Grommet nut with strain relief clamp only for 162 series. 62 Series 62GB-585-XX-XP or S* 162 Series 162GB-129-XXT 711 201 Grommet and nut with right- angled strain relief clamp. The clamp prevents flexing of the wires in the immediate vicinity of the risers, so avoiding the risk of leaks (these are supplied to separate order only for use with style T shells). Grommet nut with strain relief clamp only for 162 series. 62 Series 62GB-711-&-XP or S* 162 Series 162GB-201-X Xt 720 Clamp for unscreened jacketed cable. Cable entry dimensions are given in the table opposite. No grommet is supplied. For use with 507, 517 and 5S6T styles 62 Series only. 62 Series 62GB-720-XXt 587 Clamp for screened jacketed cable. 62 Series only with grommet. Effective sealing is provided over the range of cables covered by DEF 10 (Pattern C) as specified in DEF 5325-3. These are supplied to separate order only for use with style T shells. 62 Series 62GB-587-XX-XP or 3 162 Series 162GB-151-XX-t-XX ** 75 Clamp for screened jacketed cable. 62 Series only. with grommet. Effective sealing is provided over the range of cables covered by DEF 10 (Pattern C) as specified in DEF 5325-3. These are supplied to separate order only and are intended for use with style T shells, 62 Series 62GB-5028-X X-XP or S* 162 Series 162GB-5000-XX-1-Xx*" G 586 Potting mould and ring, supplied together as a set. 62 Series 62GB-586-XXt *The suffix XX-XP or S enables the grommetto be matched to the insert arrangement (e.g. 12-3P) ** The suffix XX specifies the cable size. Tt The suffix *& specifies the shell size.cable. SJ CLAMPS The 162 series clamps are identical to the 62 series clamps except that the grommet is omitted. It is however, still necessary to quote the full plan form because the piece parts vary to suit the appropriate S.J. Clamps are available in 62 series only where there is an appropriate cable to DEF 10 or DEF STAN 61-12 part 5 available for the plan form. 162 series availability is similar according to the plan forms tooled. These are marked C on the table. Part Number Examples 62GB-587-14-12P (grommet supplied} 162GB-151-14-12 (no grommet supplied) Dimensions and Mounting Details CABLES TO DEF 10 and DEF STAN 61-12 part 5 eg. DEF 10-3A or DEF STAN 16-2-34 CABLE CABLE CABLE DEF 10-etc DEF 10-ete DEF 10-etc PLAN-FORM per PLAN-FORM en PLAN-FORM Sen 8-2 = 145C 4a% 18-32C 36C,25D 8-3 3A, 3B, 3C, 2B 14-12C 124, 12B, 12C 20-16 = 8-33C 3A, 3B, 3C, 2B 14-15 = 20-41 36C 8-4 = 14-19 18A, 18B, 18C 22-21 = 10-2 2A,2B,2C,20| 168 = 22-55 Ps 10-6 C 6A, 6B, 6C, 4C 16-23 C = 24-61C 60c 12-3 C 3A, 3B, 3C,20. 16-26 25A, 25B, 25C 12-10 10C 18-11 = | Type B Cables: Type C Cables: Type Q Cables: Applicable to DEF10 only Type A Cables: PVC outer sheath, no overall screen, L.T. (14/.0076) unscreened cores. (equivalent DEF STAN 162 wire size) Outer screen, inner PVC sheath, L.T. (14/,0076) unscreened cores. (equivalent DEF STAN 162 wire size) Outer PVC sheath, inner screen, L.T. (14.0076) unscreened cores. (equivalent DEF STAN 162 wire size) Outer screen, inner PVC sheath, L.T. (36/.012) unscreened cores. (DEF 10 only) Straight SJ Clamps 75 SJ Clamps Overall length (max,) 62GB-587-XX-PorS 62GB-5028-XX A 162GB-151-XX 162GB-5000-XX max. max length length length length Shell} 62GB-711-XX-PorS 62GB-585-XX-P or S| G2GB-5384-X%-P or S Including | Including | Including | Including size 162GB-201-xxX 62GB-720-XX| 162GB-129-XX 162GB-16010168 |62GB-776-XX|62GB-586-XX plug receptacle plug receptacle in - in in in in mn in in in mm mm mm mm mm mm mm mn mth 08 1 1-085 0-991 0-545 0-937 0-644 2732 2-742 2-375 2-416 2756 2517 13-84 23-80 1636 6939 69:64 60-235 61-365 10 14 1-060 0-991 0-545 0-937 0-753 2-742 2-752 2-532 2-573 2692 25-17 13:84 2380 gH re BR 69-64 69-99 64-39 6535 42 1s 1-160 0-991 0-545 0-937 0-722 3715.2 3'162 2-666 29-46 Zoe lt 13:84 2380 1834 80:06 80-41 67716 14 14 1-360 0-965 0-545 0-937 0-722 3H b2 3:162 2-760 34-54 24-5] 13:84 2380 18-34 80/06 8031 70-095 16 13 1-585 1-105 0.545 0-937 0-722 S272 3-282 2-790 40-26 28-065 1384 23-80 18-34 8310 83-36 70-87 18 18 1:785 1-105 0-545 0-937 0-722 _ _ 45-34 28-065 1384 23-80 16-34 _ _ 20 13 1-981 1-285 0-545 0-937 0-877 3-272 3-345 3-250 S312 50:32 32-64 13-84 23-80 2230 83-10 84-96 82-05 84-725 22 18 2-181 1:285 0-545 0:937 O-877 . eo 55-39 3264 13-84 23-80 2230 _ _ - 24 i 2-216 1-373 0-501 0-937 0-896 3-696 3-768 3-375 3-500 56-275 34-875 TTS 23-80 2276 93:87 95-70 eorteo 88-90 B di e H ia. max, a x zZ gage 711 CA Pe Cable -Pors as sleeve dia, max. 162GB-201-xx,_Pors int. dia. Thread Cable entry dia. G2GH-587-xx-xP or S 62GB-585-Xx 162GB-214 0-005 |62GB-711-XX-X Shell | cacpsoze. xx xe or PorS -XX AllSJ | 40-127 PorS 62GB-5028-XX min, min, | max, size 162GB8-5000-xx |62GB-586-XX 162GB-129-XX62GB-720-XX clamps 162GB-201-XX 162GB-5000-XX| 62GB-776-XX |62GB-586-XX| closed free in in in in in in in in in in in mm mm mm mm mm mm mim mm mm mm mm 08 0-676 0-572 0-828 0-561 0-775 | 0-161 0-733 1-750 3-28 UNEF 0-260 0-168 | 0-230 Tee: 14:54 21-03 14-25 19-68 4-09 18-62 44-45 6-60 4-275 | 5-84 10 0-676 0-666 0-891 0-686 0-902 | 0-193 0-795 1-875 -24 NEF 0-463 0-205 | 0-312 Vee 16-915 2263 17-425 22:97 490 20-19 47-625 1176 5-205 | 7-925 12 0-812 0-822 7-016 0-811 1-030 | 0-317 0-853 2/125 3-20 UNEF 0-557 0-338 | 0-442 2062 20-88 25-805 20-60 2676 8-05 2079 53-975 14-15 6585 (11:23 14 0-926 0-907 1-141 0-936 1-157 | 0-380 0-915 2:125 4-20 UNEF 0-590 0-416 | 0-539 2352 23:04 28-98 23775 29385 ] 9-65 23:24 63-975 14-99 10565 |13-69 16 1-051 1-040 1-203 1-061 1-284 | 0-505 1-010 2062 1 =20 UNEF O713 0-550 | 0-616 26-695 26-415 30-555 2695 3261 12-83 25-65 B2305 1a11 T3eG 70) 1 5s65 18 _ 1-165 1-426 1-186 0-630 1-070 145-18 NEF 0-835 0-600 | 0-672 - 29-59 36-22 30/125 - 16-00 27-18 2121 15:24 | 17:57 20 1-280 1-285 1-426 1-311 1-539] 0-630 1-140 2-062 144-18 NEF 1-015 0-635 | 0-747 32-51 32-64 36-22 3330 38-09 |16-00 28-955 52-375 25-78 16-13 118-975 22 -- 1-400 1-567 1-436 0-755 1-170 _ 154-18 NEF 1-015 0-670 | 0-846 _ 35-56 39-80 36:745 ~ 19-175 29-72 25:78 17-G2 |27-49 24 1-620 1-540 1735 1-561 1-783 | 0-805 1-260 2-187 14-18 NEF 7-265 0-740] 0-894 41-15 39-12 44-07 39-65 45:29 [20:45 32-00 65-55 32:13 18:80 |22:71 These cable accessories are suitable for any of the externally threaded class T shells 2728 Description Accessories Amphenol Part No. CAPS AND CORDS Single hole fixing receptacles Cable mounting receptacles Flange mounting receptacles _ J Dia. for 62GB-812-08 to 24 only 62 Series 62GB-813-08 to 24 62GB-814-08 to 24 62GB-812-08 to 24 Plugs 62 Series 62GB-810-08 to 24 Military No. MS 3180 CAPS AND CHAINS 62 Series Single hole fixing receptacles Cable mounting receptacles Flange mounting receptacles UY Dia. for 62GB-738-08 to 24 only 62GB-736-08 to 24 62GB-737-08 to 24 62GB-738-08 to 24 Plugs 62 Series 62GB-742-08 to 24 Military No. MS 3180 760 Flange mounting gasket for box mounting and hermetic receptacles 62 Series 62GB-760-08 to 24Dimensions J dia. . 0-005 (0-127) Shell | 62GB-736-XX|/62GB-737-XX]62GB-810-XX|62GB-738-XX Size | 62GB-813-XX/62GB-814-XX|62GB-812-XX|62G8-742-xx in in in in mm mien ren tam 08 0-578 0-458 0-119 0-125 1468 14-63 302 3:18 10 0-703 0-583 0-119 0-125 17:86 14-81 302 3:18 12 0-891 0-708 0-119 0-125 22:63 17-98 3-02 3:18 14 1-016 0-896 0-115 0-125 25-81 Penee 3-02 Ste 16 1-141 1-021 0.179 0-125 29-39 29-93 3-02 34148 18 1:266 1-146 0-119 Ot25 32:16 29-11 3-02 318 20 12391 127) 0-119 0:125 35133 32:26 3:02 3:18 22 1-516 1:396 0-119 0-125 38:5] 34:46 3:02 3-18 24 1641 1:52 0-145 0-147 41:68 38-63 3-68 gaia Tolerance +0-25 (4635) A B C dia. (max.) Shell | 62GB-810-XX 62GB-814-XX 62GB-738-XX | 62GB-810-XxX | 62GB-736-XX 62GB-812-XX| 62GB-810-XX 62GB-814-XX 62GB-738-XX 62GB-812-XX 62GB-736-XX 62GB-742-XX | 62GB-742-XX | 62GB-737-XX 62GB-813-XX| 62GB-812-XX 62GB-736-XX 62GB-742-XX size |62GB-813-XX 62GB-737-XxX 62GB-738-XX 62GB-814-XX| 62GB-813-XX 62GB-737-Xx 08 3-0 0-496 0-521 0-750 76:2 1260 13:23 19:05 10 3:0 0-496 0-521 0-859 76:2 12:60 13:23 21-82 12 35 0-496 0-521 1-031 88-9 12:60 13-23 26-19 14 3:5 0-496 0-521 1-156 88-9 1260 13-23 2936 16 3:5 0-496 0-521 1-281 88-9 12-60 13-23 32-54 18 3:6 0-496 0-521 1:391 68-9 12-60 13:23 2533 20 40 0-558 0-521 1-531 101-6 1417 13:23 38-88 22 40 0-558 0-521 1656 101-6 14-17 13-23 42-06 24 40 0-558 0-556 1077 101: 14-17 14-12 40-139 D sq. E crs. F dia. G dia. H Shell |62GB-760-XX 62GB-760-XX 62GB-760-XX% 62GB-760-XX 0010 +0-010 + O-016 40-010 size |(1.0254) (40-254) (= 0-406) (0'254) 0-000 08 0-812 0-594. 0-500 0-130 0-:032/0-016 2062 15:08 12:70 330 0-81/0-40 10 0-938 O79 0-625 0-130 0-032/0-016 23-82 18-26 15-87 3:30 0-81/0-40 12 1:031 0813 0-750 0-130 0:032/0:016 26-18 20-65 19:05 3:30 0:81 /0-40 14 1125 0-906. 0-875 0-130 0-032/0-016 28-57 23-01 22:22 3-30 0:81 /0-40 16 1219 0-969 1-000 0-130 0-032/0-016 30-96 2461 2540 3-30 0-81/0-40 18 1312 1-063 1125 0-130 0-032/0-016 33-32 27:00 28-57 3:30 0-81 /0-40 20 1-438 1-156 1:250 0-130 0-032/0-016 3652 29-36 31-75 3-30 0-81 /0-40 22 1:563 1:250 1-375 0-130 0:032/0-016 39:70 3175 34:92 3-30 081 /0-40 24 1-688 1375 1-500 0-156 0:032/0-016 42-87 34-92 38-10 3-96 0-81 /0-40 29Insert Orientations For MIL-C-26482 and replacement purposes in patt. 105 of DEF STAN 59-35 (Part 1) Sec. 3. Normal position with pin contacts Alternative position of insert with socket contacts (o counterclockwise) Datum com Alternate position of insert with pin contacts (o clockwise) Each diagram shows mating face of insert. Orientation 0 (degrees) Insert 7 arrangement Normal W x MY! Zz je Sy oor 58 | 122 a : fics 8-3 0 60 |, Bae s = 8-33 0 90 il 3 a 8-4 0 45 i a 8-98 6 x Ss io=2 0 ; 6 4 = 10-6 0 90 = = cr 10-7 | 0 = = s i226 0 a 3 180 12-10 ; 0 60 155 270 295 14-5 0 40 i 184 | 8 14-12 0 43 90 i - 14-15 0 17 110 155 | 234 14-19 0 - 30 165 315 i6-8 > 0 54 152 180 331 16-23 0 158 270 = 16-26 0 60 275 338 18-11 0 62 119 241 340 18=39 0 85 138 222 265 20-16 0 238 318 333 347 20-41 0 ih 45 126 225 5 25 0 i: [486 175 | 349 22-55 0 30 | 142 226 | 314 24-61 0 90 180 __ 270 | 324 30Key/Keyway Orientations For patt. 105 DEF STAN 59-35 (Part 1) Sec. 3. 3 Pins spaced 120 apart Datum is always taken from major key or keyway. In receptacles the major keyway always remains fixed in relation to the mounting flange. For the A*, B, C, D*, E and F orientations, the three bayonet locations and associated minor keyways are rotated complete, in accordance with the table below. N.B.The accompanying diagram shows a receptacle shell, with keyways. Corresponding key orientations for a mating plug shell are therefore always clockwise. os VALUES FOR x (degrees) VALUES FOR 0) (degrees) VALUES FOR & (degrees) ES SSN eae e OF ob TF IN Ae ig 6c [Up UE UNE A. peice rose uee S05 92S 418 1185 S20 e526 = = 35 sor so | 75 7" =) 9saoe 9s 10}105 95 85 125 115 115 85 |35 35 35 35 35 30 50/75 75 75 75 75 100 75 12/105 97 89.121 113115 85 |35 95. $5 35 35 30 60] 75 75 75 95. 75 100 75 14/105; 989-91" 179 112) 75: 120) 95 G5 435 3h 86 96 So;l/7e 75 78 75 action | 75 16|105 99 93 117 111 75 120/35 35 35 35 35 30 50/75 75 75 75 75 100 75 18/105 100 95 115 110 75 120/35 35 35 35 35 30 50/175 75 75 75 75 100 75 20 )105) 40085 116110 750120 | 36 35 35 35 936 30 Sd)| 75 75.95 75. 95 400. 75 22 | 105 101 97 113 109 75120 | 36 36 95 35 35 30 50'|95 75 75 75 751490 75 \24/105 101 97 113 109 75 120| 35 35 35 35 35 30 50/75 75 75 75 75 100 75) ia VALUES FOR = (degrees) VALUES FOR w (degrees) * Shell ORIENTATION ORIENTATION SSS N | Sipe c pee R fe Re B Be ee F Sl BO 50 = = 60) 30 45 GO ay CC | (ae 10| 50 50 50 50 50 30 45 60 50 40 80 70 70 50 12} 50 50 50 50 50 30 45 60 52 44 76 68 70 50 14| 50 50 60 50 50 30 35 GO 53 46 74 G7 30 75 16/ 50 50 50 50 50 30 35 60 54 48 72 66 30 75 18} 50 50 50 50 50 30 35 60 55 50 70 65 30 75 20| 50 50 50 50 50 30 35 60 55 50 70 66 30 75 Pe eta 22; 50 50 50 50 50 30 35 60 56 52 68 64 #30 75 Pattern 105 but available for re- [28] 80, 60. 80,60, 50 90 88 80 se 82 Go oF 80 7H REECE INGE Ce ipativca by orientations E and F. 31INTERNALLY SCREENED JACKETED CABLE TYPE C CABLE AND WIRE STRIPPING Strip the outer P.V.C. Jacket of the cable back to dim A to expose the internal braid. Trim the braid back to within 19.05mm (0.75 in) of P.V.C, jacket and fold back B. A Dimension Size mm in 08 34.93 1.375 10 36.51 1.437 12814 41.27 1.625 16&20 44.45 1.75 24 49,21 1.937 FOR 62 SERIES Strip 5.3mm (0.210 in} to 6.1mm (0.240 in) of insulation from each wire to expose centre conductor. Tin the ends. If ends fray twist them back to their original lay before tinning. FOR 162 SERIES Strip 5.6mm (0.220 in) to 6.6mm (0.260 in) of insulation from each wire taking care not to cut or nick strands. |f ends fray twist them back to their original lay. INITIAL ASSEMBLY Slide onto the cable the following items in this order (1) Nut (2) Washer (3) Gasket (4) Braid Clamp and (5) Clamp Body. (6) Grommet, 62 Series only. Assembly instructions for Amphenol straight S.J. clamps to DEF STAN 59-35 (Part 1) Sec. 3 for internally and externally screened and unscreened cables. SOLDER CONNECTION TO CONTACTS (62 SERIES) Insert the individual wires into the appropriate grommet holes. At the same time, slide the grammet back as far as possible until the tinned ends of the centre conductors are far enough out of the grommet to permit soldering to the contacts, Insert the tinned ends of wires into the appropriate contacts in 62 series connector and solder into place. Slide the grommet forward over the wired contacts and press firmly into rear of connector shell and against rear face of insert. CRIMP CONNECTION TO CONTACTS (162 SERIES) Using the recommended tools, crimp the contacts to the wires and insert them in the connector as described in the Amform instructions, which are supplied with each 162 series assembly. Bring up clamp body taking care not to drag the braid fonward. (If necessary asmall amount of thin tape may be used to hold the braid in position whilst carrying Out this operation). Screw the clamp body onto the connector accessory thread, making sure that the connector serrations engage with those on clamp body. Fold the braid out at right angles to the cable and slide forward the braid clamp. Smooth back braid onto the braid clamp and trim off the surplus. Slide up gasket, washer, screw on nut and tighten. Surplus Braid Trimmed 32EXTERNALLY SCREENED JACKETED CABLE TYPES B & Q" CABLE AND WIRE STRIPPING Strip the outer braid and internal P.V.C. jacket of the cable back to dim A A Dimension SIZE mm in 08 Soioe eahe 10 34.93 E275 12&14 39.7 1.563 16&20 42.85 1.687 24 47,63 1.875 FOR 62 SERIES Strip 5.3mm (0.210 in) to 6.1mm (0.240 in) of insulation from each wire to expose centre conductor. Tin the ends. If ends fray twist them back to their original lay before tinning. FOR 162 SERIES Strip 5.6mm (0.220) to 6.6mm (0.260 in) of insulation from each wire taking care not to cut or nick strands. If ends fray twist them back to their original lay. INITLAL ASSEMBLY Slide onto the cable the following items in this order (1) Nut (2) Washer (3) Male Braid Clamp Convolute Screen (See 8B) as far as possible, and slide on items (4) Female Braid Clamp (5) Gasket and (6) Clamp Body (7) Grommet, 62 Series only. SOLDER CONNECTION TO CONTACTS (62 SERIES) Insert the Individual wires into the appropriate grommet holes. At the same time, slide the grommet back as far as possible, until the tinned ends of the centre conductors are far enough out of the grommet to permit soldering to the contacts. Insert the tinned ends of wires into the appropriate contacts in 62 series connector and solder into place. Slide the grommet forward over the wired contacts and press firmly into the rear of connector shell and against rear face of insert. CRIMP CONNECTION TO CONTACTS (162 SERIES) Using the recommended tools, crimp the contacts to the wires and insert them in the connector as described in the Amform instructions, which are supplied with each 162 series assembly. Bring up clamp body and screw onto the connector accessory thread, making sure that the connector serrations engage with thase on clamp body. Slide forward gasket and female braid clamp. Push forward screen and fold out at right angles braid which does not return to original position. Slide up male braid clamp. Smooth back braid onto male braid clamp and trim off surplus. Slide up washer. Screw on nut and tighten. Z Surplus Braid Trimmed UNSCREENED JACKETED CABLES TYPE A All procedures concerning this type of cable to be as for internally screened jacketed cable, but all references to screen (Braid) to be disregarded. 33INTERNALLY SCREENED JACKETED CABLE TYPE C CABLE AND WIRE STRIPPING Strip the outer P.V.C. jacket of the cable back to dim A to expose the internal braid. Trim the braid back to within 19.05mm (0.75 in) of P.V.C. jacket and fold back B Size A Dimension mm in 08 58.15 2.89 10,12,14 66.68 2.625 16 69.85 2.75 20 88.9 3.50 24 95.25 3.75 FOR 62 SERIES Strip 5.3mm (0.210 in) to 6.1 mm (0.240 in) of insulation from each wire to expose centre conductor. Tin the ends. If ends fray, twist them back to their original lay before tinning. FOR 162 SERIES Strip 5.6mm (0.220 in) to 6.6mm (0.260 in) of insulation from each wire taking care not to cut or nick strands, If ends fray, twist them back to their original lay. Assembly instructions for Amphenol angled $.J. clamps to DEF STAN 59-35 (Part 1) Sec. 3 for internally and externally screened and unscreened cables. INITIAL ASSEMBLY Slide onto the cable the following items in this order (1) Nut (2) Washer (3) Gasket (4) Braid Clamp (5) 75 Angled Body (6) Grommet, 62 Series only. SOLDER CONNECTION TO CONTACTS (62 SERIES) Insert the individual wires into the appropriate grommet holes. At the same time, slide the grommet back as far as possible, until the tinned ends of the centre conductors are far enough out of the grommet to permit soldering to the contacts. Insert the tinned ends of wires into the appropriate contacts in 62 series connector and solder into place. Slide the grommet forward over the wired contacts and press firmly into the rear of the connector shell and against rear face of insert. CRIMP CONNECTION TO CONTACTS (162 SERIES) Using the recommended tools crimp the contacts to the wires and insert them in the connector as described in the Amform instructions, which are supplied with each 162 series assembly. Bring up clamp body taking care not to drag the braid forward. (If necessary a small amount of thin tape may be used to hold the braid in position whilst carrying out this operation). Screw the clamp body onto the connector accessory thread, making sure that the connector serrations engage with those on the clamp body, Fold the braid out at right angles to the cable and slide forward the braid clamp, Smooth back braid onto the braid clamp and trim off the surplus. Slide up gasket, washer, screw on nut and tighten. Surplus Braid Trimmed a 34EXTERNALLY SCREENED JACKETED CABLES TYPES B&Q CABLE AND WIRE STRIPPING Strip the outer braid and internal PVC. jacket of the cable back to dim A. A Dimension SIZE mm in 08 58.15 2.89 10,12,14 66.68 2.625 16 69.85 2.75 20 88.9 3.50 24 95.25 245 FOR 62 SERIES Strip 5.3mm (0.210in) to 6.1mm (0.240in) of insulation from each wire ta expose centre conductor. Tin the ends, If ends fray, twist them back to their original lay betore tinning, FOR 162 SERIES Strip 5.6mm (0.220 in} to 6.6mm (0.260 in) of insulation from each wire taking care not to cut or nick strands, If ends fray twist them back to their original lay. INITIAL ASSEMBLY Slide onto the cable the following items in this order: - (1) Nut (2) Washer (3) Male Braid Clarnp - Convolute Screen (See B) as far as possible and slide on iterns:- (4) Female Braid Clamp (5) Gasket (6) 75 Right Angled Body (7) Grommet, 62 Series only. SOLDER CONNECTION TO CONTACTS (62 SERIES) Insert the individual wires into the appropriate grommet holes. At the same time, slide the grommet back as far as possible, until the tinned ends of the centre conductors are far enough out of the grommet to permit soldering to the contacts. Insert the tinned ends of wires into the appropriate contacts in 62 series connector and solder into place. Slide the grommet forward over the wired contacts and press firmly into the rear of connector shell and against rear face of insert. CRIMP CONNECTION TO CONTACTS (162 SERIES) Using the recommended tools, crimp the contacts to the wires and insert them in the connector as described in the Amform instructions which are supplied with each 162 series assembly. Bring up clamp body taking care not to drag the braid forward. (If necessary a small amount of thin tape may be used to hold the braid in position whilst carrying out this operation). Screw the clamp body onta the connector accessory thread, making sure that the connector serrations engage with those on clamp body, Fold the braid out at right angles to the cable and slide forward the braid clamp. Smooth back braid onto the braid clamp and trim off surplus. Slide up gasket, washer, screw on nut and tighten. UNSCREENED JACKETED CABLES TYPE A All procedures concerning this type of cable to be as for internally screened jacketed cable, but all references to screen (Braid) to be disregarded. 35WIRE STRIPPING 62 GB SERIES Strip 5.3mm (.210in) to 6.1mm (.240in) of insulation from end of wires tO expose centre conductor and tin the ends. If encis fray, twist them back to their original lay before tinning CONTACT AND WIRE DATA 162 GB SERIES 62GB and 162GB Assembly Instructions WIRE STRIPPING 162 GB SERIES Strip 5.6mm (.220 in.) to 6.6mm (.260 in.) of insulation fram end of wire for both size 20 and 16 contacts taking care not to cut or nick strands. If ends fray twist them back to their original lay Contact Colour Cantaet part nos MR terre | Permissible insulation Stripping Size Code UTA Lea ITE SIZES: O.D. range for grammet lengths sealing AVW.G in ] in in rm ia mm pin: 162GB-149--20,000-05 | ,.,.... 0.032 - 0.020 : 0.220 - 0.260 ee Hee skt: 162GB-101-20,000-05 | 29:22:24 0.81 -0.51 OIe216. 8.6 -6.6 pin: 162GB-149-16,000-05 0.051-0.032 0.066:0,109 0.220-0,260 16 BLUE skt: 162GB-101-16000-05 16,18;20 1.295 - 0.81 1.675 -2.77 5.6 - 6.6 CRIMP WIRE TO CONTACT Use Amphenol 294-542 Crimp Tool [M22520/1-01] with 294-1889-01 Turret Head [M22520/1-02]. Release and rotate Turret Knob to proper contact size (as per colour code) and lock adjust Selector Knab on handle to correct wire size [see table]. Insert stripped wire into Contact Pocket until it is visible through inspec- tion hole. Fully seat Contact in Crimp Tool Positioner and close handles in one full stroke. (The Rachet will not release until tool has completed full stroke). Inspect Crimp for wire visibility through Inspection Hole. INSPECTION HOLE CRIMPING JAW SETTING Contact Size Wire Size Crimp Jaw Setting mi ' 24 No. 2 20 22 No, 3 20 Noa. 4 20 No.4 16 18 No. 5 16 No.6 CRIMPING WIRE TO CONTACT CONTACT INSERTION Select the proper insertion tool for the size of contact table 1. The insertion tool and procedure are the sarne for both pin and socket contacts. Slide rear accessory and sleeve over wire bundle, Lay wire in groove of insertion tool and slide contact into front of tool until it is properly located in tool probe. Insert contact into the correct hole in the rear face of the grammet. Keeping contact in line with the axis of the hole, apply asmooth even push on the tool until the contact is fully seated in position, Note: it is essential that the contact and tool and are correctly aligned with the axis of hole during insertion tO prevent damage to contacts. Withdraw tool at right angles to grommet surface unti! completely free of connector. All contacts must be inserted whether in circuit or not and the appropriate size sealing piug used behind any contacts that are not wired. Push the sealing plug in by hand until it is fully seated. 36 TABLE 1 Contact | Colour Insertion tool part number Grommet Size Code Amphenol M.S. Sealing Plug 20 RED | 294GB-5000-20 162GB-130-20000 16 BLUE 294-96 MS 24256A4-16 Tage Ee> 38000)CONTACT INSERTION CONTACT REMOVAL CAUTION: extra care is required in this Operation to prevent damage ta the connector Remove the rear accessory and sleeve and slide back on wire buncle Select the proper removal too! for the size of contact from table 2. The same tool is used for both pin and socket contacts. Position the removal tool over the contacts to be removed and push until tool probe is fully bottomed, shown when indicator band enters. insert hole. Tool 1s inserted to first band only when removing pin contacts and to second band for socket contacts removal, Slide the plunger knob fonvard to remove contact, Details of operator training are available fram Amphenal upon request. INDICATOR BAND TABLE 2 Contact Colour Removal tool part number Size Code Amphenal NES 20 RED 294-89 MS 24256R-20 16 BLUE 294-97 MS 24256R-16 CONTACT REMOVAL 37International Locations EUROPE Amphenol Limited Thanet Way, Whitstable, Kent CTS JF. England. Tel.: (0227)264411 Telex: 96157 Fax: (0227)276571 Amphenol Sicem Italia, S.p.A. Via Senato 6/B 20020 Arese (Milano) Italy Tel.: (02)93 85 161 Telex: 934623 Amphenol Socapex France 10 Bis, Quai Leon-Blum BP 3292151 Suresnes Cedex France Tel. (1) 77291 13 Telex: 204 780 F Amphenol-Tuchel Electronics GmbH August-HauBer-Str. 10 7100 Heilbronn W. Germany Tel.: (07 131)486-1 Telex: 728223 FAR EAST Amphenol Gesellschaft mbH JAPAN Tautenhayngasse 22 A-1150 Wien (Vienna) Austria Tel.; (0222)95 1511 Telex: 132661 Nippon Interconnect Company Head office 2-3-27 Kudan Minami Chiyoda-ku. Tokyo 102 Tel.: (81-3) 263-5611 Telex: (781) 2324654 HQ NIC FAX: (81-3) 239-5132 Amphenol Benelux B.V. Industrieweg 21 3401 MA |isselstein The Netherlands Tel.: (8408) 87844 Telex: 40794 HONG KONG Amphenol East Asia Limited 513-514 World Commerce Centre Harbour City 11 Canton Road Amphenol Scandinavia AB Kanalvaegen 1 S-19461 Upplands Vaesby Sweden TST, Kowloon Tel.: (07 60) 88035 Hong Kong Telex: 17890 Tel.: (3) 68 1283/4 Telex: 39289 Amphetronix Limited Plot No. 105 Bhosari Industrial Area Post Box No. 1 Poona 411026 India Tel.: 83363, 83463 Telex: 145-337 NORTH AMERICA CANADA Amphenol Canada 44 Metropolitan Road Scarborough, Ontario M1R2T9 Canada Tel.: 416/291-4401 TWX: 610-492-4379 USA AND OTHER INTERNATIONAL AREAS Amphenol World Headquarters L.P.L. Investment Group Ine. P.O. Box 384 358 Hall Avenue Wallingford Gonnecticut C.T. 06492 Tel.: 203-265-8600 Amphenol! products produced worldwide are shown in four product catalogue binders The International Catalogue for Amphencl products consists of an individual data catalogue for each product series produced world-wide, Product series are combined by product groups, and published in eight (8) separate condensed catalogues as listed below: Catalogue Number Circular Environmental Connectors CE-SF Circular Industrial Connectors CI-SF Coaxial Connectors CC-SF Flat Ribbon Connectors FR-SF Printed Circuit Connectors PC-SF Rack and Panel (Rectangular) Connectors RP-SF Socket Products SO-SF Telecommunication Products TP-SF Data catalogues contain a description of the product series, technical information, specification data, dimensions and part numbers. A data catalogue or a condensed catalogue can be obtained from any international location listed above. When ardering state the catalogue number. Eight Condensed Catalogues illustrate the products by series designation NOTICE Products are sold subject to Amphenols conditions of sale ("the standard conditions). All specifications and statements contained herein are believed ta be correct at the time of printing. but na representation or warranty, express or implied, is given as to any specification or statement contained herein. Product specifications including performance charactenstics are typical only and subject to deviation. Specifications are also subject to change without notice User should not assume that all safety measures are indicated or thal other measures may not be required No representation or warranty. express or implied, is given that any use of products (including any stated or suggested use) does not infringe any patent, registered design or other third party nghts and no stated or suggested use of products can be taken to recommend any such infringement Amphenol an Hi GF. sn company