FAST TTL Logic Delay line The FAST TTL Logic Delay Lines manufactured by Engineered Components Company are designed to provide an output waveform that reproduces the input waveform after a set amount of delay time has elapsed. These delay lines are non-inverting. The delay times are calibrated to the listed tolerances on the rising edge delays. The MTBF on these modules, when calculated per MIL-HDBK-217, for a 50 deg.C ground fixed environment and with 50VDC applied, is in excess of 6 million hours. The temperature coefficient of delay is less than 1200 ppm/deg.C over the operating temperature range of 0 to +70 deg. C. The module is provided in a 14-pin DIP package, fully encapsulated in epoxy resin and is housed in a Diallyl Phthalate case, blue in color. The case marking is applied by silkscreen using white epoxy paint. The 4 copper leads are tin-lead plated and meet the solderability requirements of MIL-STD-202, Method 208. MECHANICAL DIAGRAM Thru-Hole (F Suffix) J-Lead (J Suffix) Gull-Wing (G Suffix) .150 TYP. .300 .534 TYP. .060 TYP. .020 TYP. .020 DIA. TYP. .300 TYP. MADE IN USA .030 Top view .425 IN MADE IN USA YYWW .800 Top view .425 Product Selection Table (Cont.) (Add Suffixes for Lead designation, F, G, or J) (Add Suffixes for Lead designation, F, G, or J) Part Number Output Delay and Tolerance (in ns) Part Number Output Delay and Tolerance (in ns) FLDL-TTL-5 FLDL-TTL-6 FLDL-TTL-7 FLDL-TTL-8 FLDL-TTL-9 FLDL-TTL-10 FLDL-TTL-11 FLDL-TTL-12 FLDL-TTL-13 FLDL-TTL-14 FLDL-TTL-15 FLDL-TTL-16 FLDL-TTL-17 FLDL-TTL-18 FLDL-TTL-19 FLDL-TTL-20 FLDL-TTL-21 FLDL-TTL-22 FLDL-TTL-23 FLDL-TTL-24 FLDL-TTL-25 FLDL-TTL-30 FLDL-TTL-35 FLDL-TTL-40 FLDL-TTL-45 FLDL-TTL-50 FLDL-TTL-55 5.0+/-1.0 6.0+/-1.0 7.0+/-1.0 8.0+/-1.0 9.0+/-1.0 10.0+/-1.0 11.0+/-1.0 12.0+/-1.0 13.0+/-1.0 14.0+/-1.0 15.0+/-1.0 16.0+/-1.0 17.0+/-1.0 18.0+/-1.0 19.0+/-1.0 20.0+/-1.0 21.0+/-1.0 22.0+/-1.0 23.0+/-1.0 24.0+/-1.0 25.0+/-1.0 30.0+/-1.5 35.0+/-1.5 40.0+/-1.5 45.0+/-2.0 50.0+/-2.0 55.0+/-2.0 FLDL-TTL-60 FLDL-TTL-65 FLDL-TTL-70 FLDL-TTL-75 FLDL-TTL-80 FLDL-TTL-85 FLDL-TTL-90 FLDL-TTL-95 FLDL-TTL-100 FLDL-TTL-125 FLDL-TTL-150 FLDL-TTL-175 FLDL-TTL-200 FLDL-TTL-225 FLDL-TTL-250 FLDL-TTL-275 FLDL-TTL-300 FLDL-TTL-350 FLDL-TTL-400 FLDL-TTL-450 FLDL-TTL-500 FLDL-TTL-600 FLDL-TTL-700 FLDL-TTL-800 FLDL-TTL-900 FLDL-TTL-1000 60.0+/-2.0 65.0+/-2.5 70.0+/-2.5 75.0+/-2.5 80.0+/-2.5 85.0+/-3.0 90.0+/-3.0 95.0+/-3.0 100.0+/-3.0 125.0+/-4.0 150.0+/-4.5 175.0+/-5.0 200.0+/-6.0 225.0+/-7.0 250.0+/-8.0 275.0+/-9.0 300.0+/-10.0 350.0+/-11.0 400.0+/-12.0 450.0+/-14.0 500.0+/-15.0 600.0+/-18.0 700.0+/-20.0 800.0+/-22.0 900.0+/-24.0 1000.0+/-26.0 FLDL-TTL-10J IN C C .800 .800 Product Selection Table OUT V FLDL-TTL-10G .285 DATE CODE OUT V C IN .030 DATE CODE OUT FLDL-TTL-10F .285 YYWW .250 DATE CODE V .400 .300 TYP. .300 TYP. YYWW .030 .020 TYP. .010 TYP. .010 TYP. MADE IN USA +/-.020 .130 .450 TYP. Operating Specifications: All measurements made at 25 deg. C All measurements made with Vcc = +5VDC All measurements made with (1) FAST TTL output load Operating Temperature: 0 to +70 deg. C Storage Temperature: -55 to +125 deg. C Vcc Supply Voltage: 4.75 to 5.25VDC Vcc Supply Current: Constant "0" in = 40mA typical Constant "1" in = 7mA typical Logic "High" Input: Voltage: 2.0VDC min. ; Vcc max. Current: 2.7VDC = 20uA max. ; 5.5VDC = 1mA max. Logic "Low" Input: Voltage: 0.8 VDC max. Current: -0.6mA max. Logic "High" Voltage Out: 2.7VDC min. Logic "Low" Voltage Out: 0.5VDC max. BLOCK DIAGRAM V 14 IN 1 Input Buffer Delay Line Special modules can often be manufactured to provide for customer specific applications. engineered components company A Division of Cornucopia Tool & Plastics, Inc. PO Box 1915, 448 Sherwood Rd., Paso Robles CA 93447 Output Buffer 8 OUT 7 C Phone: 805-369-0034 Fax: 805-369-0033 Web: www.ec2.com