Fluke i2000 Flex AC Current Clamp Technical Data The i2000 is an ac current probe Utilizing the Rogowski principle. It can be used to measure currents up to 2000 A when used in conjunction with multimeters, recorders or data loggers. The flexible and lightweight measuring head allows quick and easy installation in hard to reach areas. Electrical specifications Current ranges: 20 A, 200 A, 2000 A ACRMS Output sensitivity (ac-coupled): 100 mV, 10 mV, 1 mV per A Load impedance: 100 kW minimum Accuracy (at +25 C): 1 % of range (45 Hz to 65 Hz) Linearity (10 % to 100 % of range): 0.2 % of reading Noise: 8 mV ac rms (30 A), 2 mV ac rms (300 A, 3000 A) Frequency range: 10 Hz to 20 kHz (-3 dB) Phase error: < 1 (45 Hz to 65 Hz), : 10 (at 20 kHz) Position sensitivity (with cable > 25 mm from the coupling): 2 % of range External field (with cable > 200 mm from the head): 1 % of range Power supply: 2 x AA/MN 1500/LR6 Alkaline, 200 hours, low battery indicator Temperature coefficient: 0.08 % of reading per C Working voltage (see Safety standards section): 600 V ac rms or dc General specifications Head cable length (double insulated): 610 mm (24 in) Head cable diameter: 14.3 mm (0.56 in) Head bend radius: 38.1 mm (1.5 in) Cable length (head to electronics): 2 m (6.56 ft) Output connection: BNC with BNC to Banana adapter included Operating temperature range: 0 C to +70 C (32 F to 158 F) (head and electronics) Storage temperature range: -40 C to +105 C (-40 F to 221 F) (head), -20 C to +85 C (-4 F to 185 F) (electronics) Operating humidity: 15 % to 85 % (non-condensing) Weight: 180 g (6.34 oz) (head), 190 g (6.70 oz) (electronics) EMC Standards EN 61326: 1998 +A1, A2, & A3 Safety standards EN 61010-1: 2001 EN 61010-2-032: 2002 EN 61010-031: 2002 600 Vrms, Category III, Pollution Degree 2 Use of the probe on uninsulated conductors is limited to 600 V acrms or dc and frequencies below 1 kHz. Ordering information i2000 Flex AC Current Clamp Fluke. Keeping your world up and running.TM Fluke Corporation PO Box 9090, Everett, WA USA 98206 Fluke Europe B.V. PO Box 1186, 5602 BD Eindhoven, The Netherlands i2000 Flex connected to a Fluke 87V Digital Multimeter. For more information call: In the U.S.A. (800) 443-5853 or Fax (425) 446-5116 In Europe/M-East/Africa +31 (0) 40 2 675 200 or Fax +31 (0) 40 2 675 222 In Canada (800) 36-FLUKE or Fax (905) 890-6866 From other countries +1 (425) 446-5500 or Fax +1 (425) 446-5116 Web access: http://www.fluke.com (c)2006 Fluke Corporation. All rights reserved. Specifications subject to change without notice. Printed in U.S.A. 12/2006 2688061 D-EN-N Rev D