ISL88016, ISL88017 (R) Data Sheet December 22, 2006 6-Pin Voltage Supervisors with PinSelectable Voltage Trip Points FN6141.0 Features * Pin-Selectable Single Voltage Monitoring Supervisors The ISL88016, ISL88017 supervisors offer pin-selectable voltage trip points along with popular functions such as Power-on Reset control, Supply Voltage Supervision, and Manual Reset assertion in a small 6 Ld TSOT-23 package. By connecting the three VSET pins to VDD, GND or floating, users can program the voltage trip point from 1.60V to 2.85V in 50mV increments on the ISL88016 and from 2.15V to 4.65V in 100mV increments on the ISL88017. These userselectable reset threshold voltages are accurate to 2% over temperature and the reset signal is valid down to 1V. Intersil's proprietary TwinPinTM combines the active low reset out with the manual reset input into one pin. This provides device adjustability without sacrificing functionality. These parts are specifically designed for low power consumption and high threshold accuracy. * User Pin-Selectable Voltage Trip Points - ISL88016: 1.60V to 2.85V in 50mV Steps - ISL88017: 2.15V to 4.65V in 100mV Steps * Reduce Inventory on Fixed Voltage Trip Point Options * Manual Reset Capability * Proprietary TwinPinTM Combines Active-Low Reset Output and Manual Reset Input Functions into One Pin * Reset Signal Valid Down to VDD = 0.8V * Voltage Threshold 2% Accuracy Over Temp * No External Components Necessary * Immune to Power-Supply Transients * Ultra Low 3A Supply Current * Small 6 Ld TSOT-23 Pb-Free Plus Anneal Available (RoHS Compliant) Pinout ISL88016, ISL88017 (6 LD TSOT-23) TOP VIEW Applications * Process Control Systems VDD 1 6 RST/MR * Intelligent Instruments * Embedded Control Systems GND 2 ISL88016 ISL88017 5 VSET3 * Computer Systems * Portable/Battery-Powered Equipment VSET1 3 4 VSET2 * PDA and Hand-Held PC Devices Ordering Information PART NUMBER (Note) PART TAPE & MARKING REEL PACKAGE (Pb-Free) PKG. DWG. # ISL88016IHTZ-T 016Z 3k pcs 6 Ld TSOT-23 MDP0049 Tape & Reel ISL88017IHTZ-T 017Z 3k pcs 6 Ld TSOT-23 MDP0049 Tape & Reel ISL88016IHTZ-TK 016Z 1k pcs 6 Ld TSOT-23 MDP0049 Tape & Reel ISL88017IHTZ-TK 017Z 1k pcs 6 Ld TSOT-23 MDP0049 Tape & Reel ISL88016/17EVAL1Z Evaluation Platform NOTE: Intersil Pb-free plus anneal products employ special Pb-free material sets; molding compounds/die attach materials and 100% matte tin plate termination finish, which are RoHS compliant and compatible with both SnPb and Pb-free soldering operations. Intersil Pb-free products are MSL classified at Pb-free peak reflow temperatures that meet or exceed the Pb-free requirements of IPC/JEDEC J STD-020. 1 CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures. 1-888-INTERSIL or 1-888-468-3774 | Intersil (and design) is a registered trademark of Intersil Americas Inc. Copyright Intersil Americas Inc. 2006. All Rights Reserved All other trademarks mentioned are the property of their respective owners. ISL88016, ISL88017 Functional Block Diagrams VDD RST/MR VSET1 VSET2 VOLTAGE SETTING POR VREF PB VDD VSET3 GND ISL88016 ISL88017 Product Features Table FUNCTION ISL88016 ISL88017 Active-Low Reset (RST) x x Manual Reset Input (MR) x x 1.60V to 2.85V (50mV Increments) Pin-Selectable Voltage Trip Range x 2.15V to 4.65V (100mV Increments) Pin-Selectable Voltage Trip Range x Pb-Free Package Option Available x x Pin Descriptions PIN NAME FUNCTION 1 VDD Supply Voltage and Monitored Input. The VDD pin is the IC power supply terminal and also the monitored input. The voltage at this pin is compared against the programmed voltage trip point, VTP. A reset is first asserted when the device is initially powered up to ensure that the power supply has stabilized. Thereafter, reset is again asserted whenever VDD falls below VTH. The device is designed with hysteresis to help prevent chattering due to noise and is immune to brief power-supply transients. 2 GND Ground. 3 VSET1 4 VSET2 5 VSET3 6 RST/MR 2 Voltage Trip Point Select Pins 1, 2 and 3. These inputs are either tied either to GND or VDD or left floating in various combinations to program the falling voltage trip point. See Voltage Trip Point Setting Table on following page for programming configurations. Proprietary TwinPinTM technology combines Active-Low Reset Output and Manual Reset Input Functions into one pin. This dual function pin functions as both the reset output and a manual reset input. The RST output pin has an integrated 100k pull-up resistor to VDD that is pulled to GND (LOW) when reset is asserted, VDD < programmed voltage trip point. The MR input is an active-low debounced input to which a user can connect a push-button to add manual reset capability. FN6141.0 December 22, 2006 ISL88016, ISL88017 Power-On Reset Voltage Setting VTH ISL88016 ISL88017 VSET1 VSET2 VSET3 1.60 2.15 GND GND GND 1.65 2.25 FLOAT GND GND 1.70 2.35 VDD GND GND 1.75 2.45 GND FLOAT GND 1.80 2.55 FLOAT FLOAT GND 1.85 2.65 VDD FLOAT GND 1.90 2.75 GND VDD GND 1.95 2.85 FLOAT VDD GND 2.00 2.95 VDD VDD GND 2.05 3.05 GND GND FLOAT 2.10 3.15 FLOAT GND FLOAT 2.15 3.25 VDD GND FLOAT 2.20 3.35 GND FLOAT FLOAT 2.25 3.45 FLOAT FLOAT FLOAT 2.30 3.55 VDD FLOAT FLOAT 2.35 3.65 GND VDD FLOAT 2.40 3.75 FLOAT VDD FLOAT 2.45 3.85 VDD VDD FLOAT 2.50 3.95 GND GND VDD 2.55 4.05 FLOAT GND VDD 2.60 4.15 VDD GND VDD 2.65 4.25 GND FLOAT VDD 2.70 4.35 FLOAT FLOAT VDD 2.75 4.45 VDD FLOAT VDD 2.80 4.55 GND VDD VDD 2.85 4.65 FLOAT VDD VDD Reserved Reserved VDD VDD VDD 3 FN6141.0 December 22, 2006 ISL88016, ISL88017 Absolute Maximum Ratings Recommended Operating Conditions Temperature Under Bias . . . . . . . . . . . . . . . . . . . . .-40C to +125C Storage Temperature . . . . . . . . . . . . . . . . . . . . . . .-65C to +150C Voltage on Any Pin with Respect to GND . . . . . . . . . . . -1.0V to +7V D.C. Output Current . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5mA Lead Temperature (Soldering, 10s) . . . . . . . . . . . . . . . . . . . . +300C Temperature Range (Industrial) . . . . . . . . . . . . . . . . .-40C to +85C CAUTION: Absolute Maximum Ratings indicate limits beyond which permanent damage to the device and impaired reliability may occur. These are stress ratings provided for information only and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of this specification are not implied. For guaranteed specifications and test conditions, see Electrical Specifications. The guaranteed specifications apply only for the test conditions listed. Some performance characteristics may degrade when the device is not operated under the listed test conditions. Electrical Specifications SYMBOL Over the recommended operating conditions unless otherwise specified. PARAMETER TEST CONDITIONS MIN TYP MAX UNITS 5.5 V BIAS VDD Supply Voltage Range IDD ISL88016 Supply Current VDD > VTH ISL88017 Supply Current VDD > VTH 1.6 VDD = 5.0V 4.3 6 A VDD = 3.3V 3.1 4.9 A VDD = 2.5V 3.1 4.5 A VDD = 1.8V 2.5 4.4 A VDD = 5.0V 4.0 8.5 A VDD = 3.3V 3.2 8.5 A VDD = 2.5V 3.2 6.5 A VDD = 2.25V 3.0 5.4 A +2 % VOLTAGE THRESHOLD VTH VDD Voltage Trip Point VTHHYST Hysteresis at VTH Input Temperature = +25C See Power-On Reset Voltage Setting Table on page 3 -2 1 % RESET ISL88016 Reset Output Voltage Low VDD < VTH, Sinking 0.225mA 0.20 0.5 V ISL88017 Reset Output Voltage Low VDD < VTH, Sinking 0.225mA 0.20 0.5 V VOH Reset Output Voltage High VDD > VTH VDD tPOR POR Time-Out Delay tRST VTH Low to Reset Asserted Delay VOL CLOAD 140 VDD Open Load Capacitance on Reset Pin 200 V 280 ms 0.01 s 5 pF MANUAL RESET VMR MR Input Voltage 100 tMR MR Minimum Pulse Width RPU Integrated RST/MR Pull-Up Resistor 10 mV s 100 k VSET IVSET VSET Current 1 VVSET VSET Open Pin Voltage VIL VSET Input Voltage Low VIH VSET Input Voltage High 4 VSET = Open 0.5VDD V 0.1VDD 0.9 x VDD A V V FN6141.0 December 22, 2006 ISL88016, ISL88017 VTH / VPOR VDD 1V tPOR tRST tPOR tPOR RST MR >tMR FIGURE 1. VOLTAGE MONITORING TIMING DIAGRAM Principles of Operation The ISL88016 and ISL88017 devices provides a low cost solution for those voltage monitoring applications needing supply voltage supervision with power reset control, and manual reset assertion. By integrating these common features along with three pins of Vth programming into a small 6 Ld TSOT-23 package and using only 1A of supply current, the ISL88016 and ISL88017 devices can lower system cost, reduce board space requirements, and increase the reliability of a system while reducing inventory overhead costs. Low Voltage Monitoring During normal operation, the ISL88016 and ISL88017 monitor the voltage level of VDD. The device asserts a reset (RST = LOW) if this voltage is less than the programmed voltage trip point. The reset signal prevents system operation during a power failure or brownout condition. This reset signal remains asserted until VDD exceeds the voltage threshold setting for the reset time delay period tPOR. (See Figure 1). The ISL88016 and ISL88017 allow users to customize the Power-On Reset voltage threshold level, which is the voltage at which the reset is deasserted. The three VSET inputs are either tied to VDD, GND or left open to program VTH. See the Power-On Reset Voltage Setting table on page 3 for specific voltage configuration. Also see Figure 2 for a schematic representation of the VSET pins being programmed, noting the minimum necessary components for IC operation. Do not attempt to reprogram a VTH while the IC is biased. 5 VDD RST/MR GND ISL88016 ISL88017 VSET1 VSET3 VSET2 FIGURE 2. SETTING VPOR USING VSET INPUTS Power-On Reset (POR) Applying power to the ISL88016 and ISL88017 activates a POR circuit which asserts reset once VDD = 1 V. (i.e., RST goes LOW). This provides several benefits: * It prevents the system microprocessor from starting to operate with insufficient voltage. * It prevents the processor from operating prior to stabilization of the oscillator. * It ensures that the monitored device is held out of operation until internal registers are properly loaded. * It allows time for an FPGA to download its configuration prior to initialization of the circuit. The reset signal remains asserted until VDD rises above the minimum voltage sense level for time period tPOR. This ensures that the VDD voltage has stabilized. Optional VDD de-coupling capacitance can be added to filter transients if needed. FN6141.0 December 22, 2006 ISL88016, ISL88017 Manual Reset The manual reset input (MR) allows the user to trigger a reset by using a push-button switch. The MR input is an active low debounced input. By connecting a push-button directly from MR to ground, the designer adds manual system reset capability (see Figure 3). Reset is asserted if the MR pin is pulled low to less than 100mV for 10s or longer while the push-button is closed. After MR is released, the reset outputs remain asserted for tPOR (200ms) and then released. FIGURE 5. ISL88016/17EVAL1Z PHOTOGRAPH ISL88016 RST/MR ISL88017 0.1 TARGET 0% PB -0.1 88017_3.55V FIGURE 3. CONNECTING A MANUAL RESET PUSH-BUTTON VDD VTH (%) 88017_4.55V -0.5 -0.7 88016_2.25V -0.9 88017_2.25V Using the ISL88016/17EVAL1Z Platform -1.1 88016_1.75V -1.3 -40 -30 -20 -10 0 10 25 35 45 55 65 75 85 (C) TEMPERATURE (oC) FIGURE 6. SAMPLED VTH% TO TARGET OVER TEMP 6.00 BIAS CURRENT (uA) The ISL88016/17EVAL1Z platform is provided with both an ISL88016 in the top and an ISL88017 in the bottom positions. Each IC is default programmed to VSET1, VSET2 and VSET3 = FLOAT but provided with jumpers to change the Vth level by individually connecting the three VSET pins to either VDD (1) or GND (0). To the left of the circuits is a VSET programming table for easy reference. Provide adequate bias to VDD to deassert RESET signal. See Figure 4 for the ISL88016/17EVAL1Z schematic and Figure 5 for its photograph. 88016_2.80V -0.3 VDD = 5V 5.00 4.00 VDD = 2.5V 3.00 2.00 VDD = 1.8V VDD = 3.3V 1.00 0.00 -40 -30 -20 -10 0 10 25 35 45 55 65 75 85 55 65 75 85 o TEMPERATURE ( C) tPOR (ms) FIGURE 7. IDD OVER TEMP FIGURE 4. ISL88016/17EVAL1Z SCHEMATIC 204 203 202 201 200 199 198 197 196 195 194 193 VDD = 5V VDD = 3.3V -40 -30 -20 -10 0 10 25 35 45 T EM P ERAT URE (o C) FIGURE 8. tPOR OVER TEMP 6 FN6141.0 December 22, 2006 ISL88016, ISL88017 TSOT Package Family MDP0049 e1 D TSOT PACKAGE FAMILY A 6 N 4 E1 2 E 3 0.15 C D 2X 1 5 2 (N/2) 0.25 C 2X N/2 TIPS e ddd M B C A-B D b NX 0.15 C A-B 1 3 SYMBOL TSOT5 TSOT6 TSOT8 TOLERANCE A 1.00 1.00 1.00 Max A1 0.05 0.05 0.05 0.05 A2 0.87 0.87 0.87 0.03 b 0.38 0.38 0.29 0.07 c 0.127 0.127 0.127 +0.07/-0.007 D 2.90 2.90 2.90 Basic E 2.80 2.80 2.80 Basic E1 1.60 1.60 1.60 Basic e 0.95 0.95 0.65 Basic e1 1.90 1.90 1.95 Basic L 0.40 0.40 0.40 0.10 L1 0.60 0.60 0.60 Reference ddd 0.20 0.20 0.13 - N 5 6 8 Reference D 2X Rev. A 12/02 NOTES: C A2 SEATING PLANE 2. Plastic interlead protrusions of 0.15mm maximum per side are not included. A1 0.10 C 1. Plastic or metal protrusions of 0.15mm maximum per side are not included. 3. This dimension is measured at Datum Plane "H". 4. Dimensioning and tolerancing per ASME Y14.5M-1994. NX 5. Index area - Pin #1 I.D. will be located within the indicated zone (TSOT6 AND TSOT8 only). (L1) 6. TSOT5 version has no center lead (shown as a dashed line). H A GAUGE PLANE c L 0.25 4 4 All Intersil U.S. products are manufactured, assembled and tested utilizing ISO9000 quality systems. Intersil Corporation's quality certifications can be viewed at www.intersil.com/design/quality Intersil products are sold by description only. Intersil Corporation reserves the right to make changes in circuit design, software and/or specifications at any time without notice. Accordingly, the reader is cautioned to verify that data sheets are current before placing orders. Information furnished by Intersil is believed to be accurate and reliable. However, no responsibility is assumed by Intersil or its subsidiaries for its use; nor for any infringements of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Intersil or its subsidiaries. For information regarding Intersil Corporation and its products, see www.intersil.com 7 FN6141.0 December 22, 2006