KBP204GL~KBP210GL GLASS PASSIVATED BRIDGE RECTIFIERS REVERSE VOLTAGE - 400 to 1000 Volts FORWARD CURRENT - 4.0 Ampere FEATURES KBP * Rating to 1000V PRV * Ideal for printed circuit board * Reliable low cost construction utilizing molded plastic * * KBP DIM. technique The plastic material has UL flammability classification 94V-0 UL recognized file #95060 A B B A F K I MECHANICAL DATA * Polarity : As marked on body * Weight : 0.05 ounces, 1.52 grams * Mounting position : Any C D 14.25 14.73 L d 1.40 1.70 E 1.80 2.20 F 0.80 3.56 1.10 4.06 D G H H G J 14.75 3.65 10.60 M E C + ~ ~ - MAX. MIN. 14.25 3.35 10.20 I J K d L M 0.55 0.35 1.22 1.42 0.76 0.86 2.7 x 45 (Typ.) - 3 - 2 All Dimensions in millimeter MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25C ambient temperature unless otherwise specified. CHARACTERISTICS SYMBOL KBP204GL KBP206GL KBP208GL KBP210GL UNIT Maximum Repetitive Peak Reverse Voltage VRRM 400 600 800 1000 V Maximum RMS Voltage VRMS 280 420 560 700 V VDC 400 600 800 1000 V Maximum DC Blocking Voltage Maximum Average Forward Rectified Current @TC=105C (With heatsink) (Without heatsink) Peak Forward Surge Current @ Tj = 25 8.3ms single half sine-wave @ TJ = 125 Peak Forward Surge Current 1.0ms single half sine-wave @ Tj =25 @ TJ=125 Maximum Forward Voltage at 4.0A DC Maximum DC Reverse Current at rated @Tj=25C Blocking Voltage @Tj=125C 2 I(AV) 4.0 2.0 A IFSM 130 110 A IFSM 260 220 A VF 1.1 V IR 5.0 500 uA 2 2 I t Rating for fusing (3mst 8.3ms) I t 50 A S Typical Junction Capacitance per element (Note 1) CJ 40 pF RJC RJL 6.0 8.0 C/W RJA 15 TJ -55 to +150 C TSTG -55 to +150 C Typical thermal resistance (Note 2) Operation Temperature Range Storage Temperature Range Note: (1) Measured at 1.0MHz and applied reverse voltage of 4.0V DC. (2) Unit mounted on 75mm x 75mm x 1.6mm Copper plate heatsink. REV. 11, Aug-2012, KBDE03 RATING AND CHARACTERISTIC CURVES KBP204GL thru KBP210GL FIG.2- MAXIMUM NON-REPETITIVE SURGE CURRENT FIG.1- FORWARD CURRENT DERATING CURVE 5 PEAK FORWARD SURGE CURRENT, (A) AVERAGE FORWARD CURRENT, (A) 160 Heat sink : 75*75*1.6 mm Copper plate 4.5 4 3.5 3 2.5 2 Without heat sink 1.5 1 0.5 140 120 100 80 60 40 Single Half-Sine-Wave 20 RESISTIVE OR INDUCTIVE LOAD 0 0 0 25 50 75 100 125 1 150 10 FIG.3- TYPICAL JUNCTION CAPACITANCE FIG.4- TYPICAL FORWORD CHARACTERISTICS 100 INSTANTANEOUS FORWARD CURRENT, (A) 10 Tj=25C, f=1MHz 1 10 Tj=125C Tj=25C 1 PULSE WIDTH : 300us 0.1 1 10 100 0.4 REVERSE VOLTAGE, (V) 0.6 0.8 1 1.2 1.4 1.6 INSTANTANEOUS FORWARD VOLT AGE, (V) FIG.6_NON-REPE TITIVE SURGE CURRENT FIG.5- TY PICAL REVERSE CHARACTERISTICS 1000 1000 Tj=125C PEAK FORWARD SURGE CURRENT, (A) CAPACITANCE, (pF) 100 INSTANTANEOUS REVERSE CURRENT, (uA) 100 NUMBER OF CY CLES AT 60Hz CASE TEMAERATURE, (C) 100 10 Tj=100C Tj=75C 1 Tj=25C 0.1 0.01 0 20 40 60 80 100 PERCENT OF RATED PEAK REVERSE VOLTAGE, (V) 120 Tj=25C 100 Tj=125C _____ Sine Wave Square Wave - - - - - 10 1 10 tp, (ms) RATING AND CHARACTERISTIC CURVES KBP204GL thru KBP210GL Fig.7 - Admissible Repetitive Peak Forward Current vs. Pulse Duration 100 V=0.1 IFRM(A) 10 V=0.2 V=0.5 1 0.1 0.0001 0.001 0.01 tp, Pulse Duration Time (sec) 0.1 1 Legal Disclaimer Notice KBP204GL thru KBP210GL Important Notice and Disclaimer LSC reserves the right to make changes to this document and its products and specifications at any time without notice. Customers should obtain and confirm the latest product information and specifications before final design, purchase or use. LSC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does LSC assume any liability for application assistance or customer product design. LSC does not warrant or accept any liability with products which are purchased or used for any unintended or unauthorized application. No license is granted by implication or otherwise under any intellectual property rights of LSC. LSC products are not authorized for use as critical components in life support devices or systems without express written approval of LSC.