
Data sheet
ConnectPower
CP SNT 160W 12-15V 8A
Weidmüller Interface GmbH & Co. KG
Klingenbergstraße 26
D-32758 Detmold
Germany
Fon: +49 5231 14-0
Fax: +49 5231 14-292083
www.weidmueller.com
Technical data
Creation date August 18, 2020 9:00:14 AM CEST
Catalogue status 14.08.2020 / We reserve the right to make technical changes. 2
Dimensions and weights
Width 57 mm Width (inches) 2.244 inch
Height 127 mm Height (inches) 5 inch
Depth 175 mm Depth (inches) 6.89 inch
Weight 880 g Net weight 1,125 g
Temperatures
Humidity at operating temperature 20 to 85% RH without
condensation
Humidity at storage temperature 20 to 90% RH without
condensation
Operating temperature, max. 50 °C Operating temperature, min. 0 °C
Storage temperature, max. 85 °C Storage temperature, min. -40 °C
Operating temperature 0 °C...50 °C Storage temperature -40 °C...85 °C
Environmental Product Compliance
REACH SVHC Lead 7439-92-1
Input
Connection range AWG26-12/ 0.13-4.0
mm²
Input current 2.9 A @ 115 V AC; 1.45 A
@ 230 V AC
Input frequency
50/ 60 Hz
Input fuse 6.3 A time-lag fuse
(internal)
Input voltage (voltage mode input) min. 85/138 V AC, max.
195/250 V AC, typ.
115...230 V AC
Inrush Current Limitation
Thermistor
Surge protection Varistor Wire connection method Screw connection
Output
Connection range AWG26-12/ 0.13-4.0
mm²
Control at 10...100% load
1%
Control at input voltage
0.5%
Mains failure bridge-over time 40 ms @ 115 V AC / 50
ms @ 230 V AC
Max. capacitance at output 6000 µF Max. residual ripple 0.2 %eff
Output current 8 A Output power 96 W
Output voltage 12...15 V Output voltage type DC
Overload protection Overload current and surge
protection
Parallel connection option
No
Surge protection Varistor Wire connection method Screw connection
General data
Degree of efficiency at max. load
85%
EMC standards EN 55011, EN 55022, EN
55024, EN 61000-6-2, 3
Low Voltage Directive
73/ 23/ EWG
Mounting position, installation notice horizontally, on terminal
rail TS 35
Operating temperature 0 °C...50 °C Power factor correction No
Protection degree
IP20
Standards DIN EN 50178, DIN EN
60950, IEC950
Status indication Green LED
System data
Output current 8 A